4 - power-supply: regulator to provide the supply voltage
7 - compatible: value maybe one of the following
11 - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
12 - enable-gpios: GPIO pin to enable or disable the panel
13 - backlight: phandle of the backlight device attached to the panel
15 Required properties when compatible is "simple-panel" or "simple-panel-dsi":
16 - display-timings: see display-timing.txt for information
18 Optional properties when compatible is a dsi devices:
19 - dsi,flags: dsi operation mode related flags
20 - dsi,format: pixel format for video mode
21 - dsi,lanes: number of active data lanes
26 compatible = "cptt,claa101wb01";
27 ddc-i2c-bus = <&panelddc>;
29 power-supply = <&vdd_pnl_reg>;
30 enable-gpios = <&gpio 90 0>;
32 backlight = <&backlight>;
37 compatible = "simple-panel-dsi";
38 ddc-i2c-bus = <&panelddc>;
40 power-supply = <&vdd_pnl_reg>;
41 enable-gpios = <&gpio 90 0>;
43 backlight = <&backlight>;
45 dsi,flags = <MIPI_DSI_MODE_VIDEO |
46 MIPI_DSI_MODE_VIDEO_BURST |
47 MIPI_DSI_MODE_VIDEO_SYNC_PULSE>;
48 dsi,format = <MIPI_DSI_FMT_RGB888>;
52 native-mode = <&timing0>;
54 clock-frequency = <160000000>;
66 pixelclk-active = <0>;