1 APM X-Gene SoC Ethernet nodes
3 Ethernet nodes are defined to describe on-chip ethernet interfaces in
6 Required properties for all the ethernet interfaces:
7 - compatible: Should state binding information from the following list,
8 - "apm,xgene-enet": RGMII based 1G interface
9 - "apm,xgene1-sgenet": SGMII based 1G interface
10 - "apm,xgene1-xgenet": XFI based 10G interface
11 - reg: Address and length of the register set for the device. It contains the
12 information of registers in the same order as described by reg-names
13 - reg-names: Should contain the register set names
14 - "enet_csr": Ethernet control and status register address space
15 - "ring_csr": Descriptor ring control and status register address space
16 - "ring_cmd": Descriptor ring command register address space
17 - interrupts: Ethernet main interrupt
18 - clocks: Reference to the clock entry.
19 - local-mac-address: MAC address assigned to this device
20 - phy-connection-type: Interface type between ethernet device and PHY device
22 Required properties for ethernet interfaces that have external PHY:
23 - phy-handle: Reference to a PHY node connected to this device
25 - mdio: Device tree subnode with the following required properties:
26 - compatible: Must be "apm,xgene-mdio".
27 - #address-cells: Must be <1>.
28 - #size-cells: Must be <0>.
30 For the phy on the mdio bus, there must be a node with the following fields:
31 - compatible: PHY identifier. Please refer ./phy.txt for the format.
32 - reg: The ID number for the phy.
35 - status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok".
39 compatible = "apm,xgene-device-clock";
40 clock-output-names = "menetclk";
44 menet: ethernet@17020000 {
45 compatible = "apm,xgene-enet";
47 reg = <0x0 0x17020000 0x0 0xd100>,
48 <0x0 0X17030000 0x0 0X400>,
49 <0x0 0X10000000 0x0 0X200>;
50 reg-names = "enet_csr", "ring_csr", "ring_cmd";
51 interrupts = <0x0 0x3c 0x4>;
52 clocks = <&menetclk 0>;
53 local-mac-address = [00 01 73 00 00 01];
54 phy-connection-type = "rgmii";
55 phy-handle = <&menetphy>;
57 compatible = "apm,xgene-mdio";
60 menetphy: menetphy@3 {
61 compatible = "ethernet-phy-id001c.c915";
68 /* Board-specific peripheral configurations */