2 Advanced Linux Sound Architecture - Driver
3 ==========================================
10 To enable ALSA support you need at least to build the kernel with
11 primary sound card support (CONFIG_SOUND). Since ALSA can emulate OSS,
12 you don't have to choose any of the OSS modules.
14 Enable "OSS API emulation" (CONFIG_SND_OSSEMUL) and both OSS mixer and
15 PCM supports if you want to run OSS applications with ALSA.
17 If you want to support the WaveTable functionality on cards such as
18 SB Live! then you need to enable "Sequencer support"
19 (CONFIG_SND_SEQUENCER).
21 To make ALSA debug messages more verbose, enable the "Verbose printk"
22 and "Debug" options. To check for memory leaks, turn on "Debug memory"
23 too. "Debug detection" will add checks for the detection of cards.
25 Please note that all the ALSA ISA drivers support the Linux isapnp API
26 (if the card supports ISA PnP). You don't need to configure the cards
33 This depends on your distribution, but normally you use the /dev/MAKEDEV
34 script to create the necessary device nodes. On some systems you use a
35 script named 'snddevices'.
41 The user can load modules with options. If the module supports more than
42 one card and you have more than one card of the same type then you can
43 specify multiple values for the option separated by commas.
45 Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
50 The core ALSA module. It is used by all ALSA card drivers.
51 It takes the following options which have global effects.
53 major - major number for sound driver
56 - limiting card index for auto-loading (1-8)
58 - For auto-loading more than one card, specify this
59 option together with snd-card-X aliases.
65 The PCM OSS emulation module.
66 This module takes options which change the mapping of devices.
68 dsp_map - PCM device number maps assigned to the 1st OSS device.
70 adsp_map - PCM device number maps assigned to the 2st OSS device.
73 - Don't block opening busy PCM devices. Default: 1
75 For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of
76 the card #0. Similarly, when adsp_map=0, /dev/adsp will be mapped
77 to PCM #0 of the card #0.
78 For changing the second or later card, specify the option with
79 commas, such like "dsp_map=0,1".
81 nonblock_open option is used to change the behavior of the PCM
82 regarding opening the device. When this option is non-zero,
83 opening a busy OSS PCM device won't be blocked but return
84 immediately with EAGAIN (just like O_NONBLOCK flag).
89 This module takes options which change the mapping of devices.
90 similar to those of the snd-pcm-oss module.
92 midi_map - MIDI device number maps assigned to the 1st OSS device.
94 amidi_map - MIDI device number maps assigned to the 2st OSS device.
97 Common parameters for top sound card modules
98 --------------------------------------------
100 Each of top level sound card module takes the following options.
102 index - index (slot #) of sound card
103 - Values: 0 through 31 or negative
104 - If nonnegative, assign that index number
105 - if negative, interpret as a bitmask of permissible
106 indices; the first free permitted index is assigned
108 id - card ID (identifier or name)
109 - Can be up to 15 characters long
110 - Default: the card type
111 - A directory by this name is created under /proc/asound/
112 containing information about the card
113 - This ID can be used instead of the index number in
116 - Default: enabled, for PCI and ISA PnP cards
121 Module for AdLib FM cards.
123 port - port # for OPL chip
125 This module supports multiple cards. It does not support autoprobe, so
126 the port must be specified. For actual AdLib FM cards it will be 0x388.
127 Note that this card does not have PCM support and no mixer; only FM
130 Make sure you have "sbiload" from the alsa-tools package available and,
131 after loading the module, find out the assigned ALSA sequencer port
132 number through "sbiload -l". Example output:
134 Port Client name Port name
135 64:0 OPL2 FM synth OPL2 FM Port
137 Load the std.sb and drums.sb patches also supplied by sbiload:
139 sbiload -p 64:0 std.sb drums.sb
141 If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
142 instead. To have the card produce sound, use aplaymidi from alsa-utils:
144 aplaymidi -p 64:0 foo.mid
149 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
151 port - port # for AD1816A chip (PnP setup)
152 mpu_port - port # for MPU-401 UART (PnP setup)
153 fm_port - port # for OPL3 (PnP setup)
154 irq - IRQ # for AD1816A chip (PnP setup)
155 mpu_irq - IRQ # for MPU-401 UART (PnP setup)
156 dma1 - first DMA # for AD1816A chip (PnP setup)
157 dma2 - second DMA # for AD1816A chip (PnP setup)
158 clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz)
160 This module supports multiple cards, autoprobe and PnP.
165 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
167 port - port # for AD1848 chip
168 irq - IRQ # for AD1848 chip
169 dma1 - DMA # for AD1848 chip (0,1,3)
171 This module supports multiple cards. It does not support autoprobe
172 thus main port must be specified!!! Other ports are optional.
174 The power-management is supported.
179 Module for Analog Devices AD1889 chips.
181 ac97_quirk - AC'97 workaround for strange hardware
182 See the description of intel8x0 module for details.
184 This module supports multiple cards.
189 Module for ALi M5451 PCI chip.
191 pcm_channels - Number of hardware channels assigned for PCM
192 spdif - Support SPDIF I/O
195 This module supports one chip and autoprobe.
197 The power-management is supported.
202 Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips.
204 port - port # for ALS100 (SB16) chip (PnP setup)
205 irq - IRQ # for ALS100 (SB16) chip (PnP setup)
206 dma8 - 8-bit DMA # for ALS100 (SB16) chip (PnP setup)
207 dma16 - 16-bit DMA # for ALS100 (SB16) chip (PnP setup)
208 mpu_port - port # for MPU-401 UART (PnP setup)
209 mpu_irq - IRQ # for MPU-401 (PnP setup)
210 fm_port - port # for OPL3 FM (PnP setup)
212 This module supports multiple cards, autoprobe and PnP.
214 The power-management is supported.
219 Module for Avance Logic ALS300 and ALS300+
221 This module supports multiple cards.
223 The power-management is supported.
228 Module for sound cards based on Avance Logic ALS4000 PCI chip.
230 joystick_port - port # for legacy joystick support.
231 0 = disabled (default), 1 = auto-detect
233 This module supports multiple cards, autoprobe and PnP.
235 The power-management is supported.
240 Module for ATI IXP 150/200/250/400 AC97 controllers.
242 ac97_clock - AC'97 clock (default = 48000)
243 ac97_quirk - AC'97 workaround for strange hardware
244 See "AC97 Quirk Option" section below.
245 ac97_codec - Workaround to specify which AC'97 codec
246 instead of probing. If this works for you
247 file a bug with your `lspci -vn` output.
249 -1 -- Default behavior.
250 0-2 -- Use the specified codec.
251 spdif_aclink - S/PDIF transfer over AC-link (default = 1)
253 This module supports one card and autoprobe.
255 ATI IXP has two different methods to control SPDIF output. One is
256 over AC-link and another is over the "direct" SPDIF output. The
257 implementation depends on the motherboard, and you'll need to
258 choose the correct one via spdif_aclink module option.
260 The power-management is supported.
262 Module snd-atiixp-modem
263 -----------------------
265 Module for ATI IXP 150/200/250 AC97 modem controllers.
267 This module supports one card and autoprobe.
269 Note: The default index value of this module is -2, i.e. the first
272 The power-management is supported.
274 Module snd-au8810, snd-au8820, snd-au8830
275 -----------------------------------------
277 Module for Aureal Vortex, Vortex2 and Advantage device.
279 pcifix - Control PCI workarounds
280 0 = Disable all workarounds
281 1 = Force the PCI latency of the Aureal card to 0xff
282 2 = Force the Extend PCI#2 Internal Master for Efficient
283 Handling of Dummy Requests on the VIA KT133 AGP Bridge
284 3 = Force both settings
285 255 = Autodetect what is required (default)
287 This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware
288 EQ, mpu401, gameport. A3D and wavetable support are still in development.
289 Development and reverse engineering work is being coordinated at
290 http://savannah.nongnu.org/projects/openvortex/
291 SPDIF output has a copy of the AC97 codec output, unless you use the
292 "spdif" pcm device, which allows raw data passthru.
293 The hardware EQ hardware and SPDIF is only present in the Vortex2 and
296 Note: Some ALSA mixer applications don't handle the SPDIF sample rate
297 control correctly. If you have problems regarding this, try
298 another ALSA compliant mixer (alsamixer works).
303 Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only).
305 port - port # for AZT2320 chip (PnP setup)
306 wss_port - port # for WSS (PnP setup)
307 mpu_port - port # for MPU-401 UART (PnP setup)
308 fm_port - FM port # for AZT2320 chip (PnP setup)
309 irq - IRQ # for AZT2320 (WSS) chip (PnP setup)
310 mpu_irq - IRQ # for MPU-401 UART (PnP setup)
311 dma1 - 1st DMA # for AZT2320 (WSS) chip (PnP setup)
312 dma2 - 2nd DMA # for AZT2320 (WSS) chip (PnP setup)
314 This module supports multiple cards, PnP and autoprobe.
316 The power-management is supported.
321 Module for sound cards based on Aztech AZF3328 PCI chip.
323 joystick - Enable joystick (default off)
325 This module supports multiple cards.
330 Module for video cards based on Bt87x chips.
332 digital_rate - Override the default digital rate (Hz)
333 load_all - Load the driver even if the card model isn't known
335 This module supports multiple cards.
337 Note: The default index value of this module is -2, i.e. the first
343 Module for Creative Audigy LS and SB Live 24bit
345 This module supports multiple cards.
351 Module for sound cards based on C-Media CMI8330 ISA chips.
353 wssport - port # for CMI8330 chip (WSS)
354 wssirq - IRQ # for CMI8330 chip (WSS)
355 wssdma - first DMA # for CMI8330 chip (WSS)
356 sbport - port # for CMI8330 chip (SB16)
357 sbirq - IRQ # for CMI8330 chip (SB16)
358 sbdma8 - 8bit DMA # for CMI8330 chip (SB16)
359 sbdma16 - 16bit DMA # for CMI8330 chip (SB16)
361 This module supports multiple cards and autoprobe.
363 The power-management is supported.
368 Module for C-Media CMI8338 and 8738 PCI sound cards.
370 mpu_port - 0x300,0x310,0x320,0x330 = legacy port,
371 1 = integrated PCI port,
372 0 = disable (default)
373 fm_port - 0x388 = legacy port,
374 1 = integrated PCI port (default),
376 soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only)
378 joystick_port - Joystick port address (0 = disable, 1 = auto-detect)
380 This module supports autoprobe and multiple cards.
382 The power-management is supported.
387 Module for sound cards based on CS4231 ISA chips.
389 port - port # for CS4231 chip
390 mpu_port - port # for MPU-401 UART (optional), -1 = disable
391 irq - IRQ # for CS4231 chip
392 mpu_irq - IRQ # for MPU-401 UART
393 dma1 - first DMA # for CS4231 chip
394 dma2 - second DMA # for CS4231 chip
396 This module supports multiple cards. This module does not support autoprobe
397 thus main port must be specified!!! Other ports are optional.
399 The power-management is supported.
404 Module for sound cards based on CS4232/CS4232A ISA chips.
406 port - port # for CS4232 chip (PnP setup - 0x534)
407 cport - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
408 mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
409 fm_port - FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
410 irq - IRQ # for CS4232 chip (5,7,9,11,12,15)
411 mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
412 dma1 - first DMA # for CS4232 chip (0,1,3)
413 dma2 - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
414 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
416 This module supports multiple cards. This module does not support autoprobe
417 thus main port must be specified!!! Other ports are optional.
419 The power-management is supported.
424 Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
425 CS4238B/CS4239 ISA chips.
427 port - port # for CS4236 chip (PnP setup - 0x534)
428 cport - control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
429 mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
430 fm_port - FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
431 irq - IRQ # for CS4236 chip (5,7,9,11,12,15)
432 mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
433 dma1 - first DMA # for CS4236 chip (0,1,3)
434 dma2 - second DMA # for CS4236 chip (0,1,3), -1 = disable
435 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
437 This module supports multiple cards. This module does not support autoprobe
438 (if ISA PnP is not used) thus main port and control port must be
439 specified!!! Other ports are optional.
441 The power-management is supported.
446 Module for Cirrus Logic CS4281 soundchip.
448 dual_codec - Secondary codec ID (0 = disable, default)
450 This module supports multiple cards.
452 The power-management is supported.
457 Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
458 CS4624/CS4630/CS4280 PCI chips.
460 external_amp - Force to enable external amplifier.
461 thinkpad - Force to enable Thinkpad's CLKRUN control.
462 mmap_valid - Support OSS mmap mode (default = 0).
464 This module supports multiple cards and autoprobe.
465 Usually external amp and CLKRUN controls are detected automatically
466 from PCI sub vendor/device ids. If they don't work, give the options
469 The power-management is supported.
474 Module for Cyrix/NatSemi Geode 5530 chip.
476 Module snd-cs5535audio
477 ----------------------
479 Module for multifunction CS5535 companion PCI device
481 The power-management is supported.
486 Module for Echoaudio Darla20
488 This module supports multiple cards.
489 The driver requires the firmware loader support on kernel.
494 Module for Echoaudio Darla24
496 This module supports multiple cards.
497 The driver requires the firmware loader support on kernel.
502 Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
505 port - Port # (PnP setup)
506 mpu_port - Port # for MPU-401 (PnP setup)
507 fm_port - Port # for FM OPL-3 (PnP setup)
508 irq - IRQ # (PnP setup)
509 mpu_irq - IRQ # for MPU-401 (PnP setup)
510 dma8 - DMA # (PnP setup)
512 This module supports multiple cards. This module is enabled only with
515 The power-management is supported.
520 Module for the dummy sound card. This "card" doesn't do any output
521 or input, but you may use this module for any application which
522 requires a sound card (like RealPlayer).
524 The power-management is supported.
529 Module for Echoaudio 3G cards (Gina3G/Layla3G)
531 This module supports multiple cards.
532 The driver requires the firmware loader support on kernel.
537 Module for EMU10K1/EMU10k2 based PCI sound cards.
538 * Sound Blaster Live!
539 * Sound Blaster PCI 512
540 * Emu APS (partially supported)
541 * Sound Blaster Audigy
543 extin - bitmap of available external inputs for FX8010 (see bellow)
544 extout - bitmap of available external outputs for FX8010 (see bellow)
545 seq_ports - allocated sequencer ports (4 by default)
546 max_synth_voices - limit of voices used for wavetable (64 by default)
547 max_buffer_size - specifies the maximum size of wavetable/pcm buffers
548 given in MB unit. Default value is 128.
549 enable_ir - enable IR
551 This module supports multiple cards and autoprobe.
553 Input & Output configurations [extin/extout]
554 * Creative Card wo/Digital out [0x0003/0x1f03]
555 * Creative Card w/Digital out [0x0003/0x1f0f]
556 * Creative Card w/Digital CD in [0x000f/0x1f0f]
557 * Creative Card wo/Digital out + LiveDrive [0x3fc3/0x1fc3]
558 * Creative Card w/Digital out + LiveDrive [0x3fc3/0x1fcf]
559 * Creative Card w/Digital CD in + LiveDrive [0x3fcf/0x1fcf]
560 * Creative Card wo/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
561 * Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
562 * Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f]
563 * Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff]
564 * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
565 * Creative Card all ins and outs [0x3fff/0x7fff]
567 The power-management is supported.
572 Module for Creative Emu10k1X (SB Live Dell OEM version)
574 This module supports multiple cards.
579 Module for Ensoniq AudioPCI ES1370 PCI sound cards.
580 * SoundBlaster PCI 64
581 * SoundBlaster PCI 128
583 joystick - Enable joystick (default off)
585 This module supports multiple cards and autoprobe.
587 The power-management is supported.
592 Module for Ensoniq AudioPCI ES1371 PCI sound cards.
593 * SoundBlaster PCI 64
594 * SoundBlaster PCI 128
595 * SoundBlaster Vibra PCI
597 joystick_port - port # for joystick (0x200,0x208,0x210,0x218),
598 0 = disable (default), 1 = auto-detect
600 This module supports multiple cards and autoprobe.
602 The power-management is supported.
607 Module for sound cards based on ESS ES968 chip (PnP only).
609 port - port # for ES968 (SB8) chip (PnP setup)
610 irq - IRQ # for ES968 (SB8) chip (PnP setup)
611 dma1 - DMA # for ES968 (SB8) chip (PnP setup)
613 This module supports multiple cards, PnP and autoprobe.
615 The power-management is supported.
620 Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
622 port - port # for ES-1688 chip (0x220,0x240,0x260)
623 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
624 irq - IRQ # for ES-1688 chip (5,7,9,10)
625 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
626 dma8 - DMA # for ES-1688 chip (0,1,3)
628 This module supports multiple cards and autoprobe (without MPU-401 port).
633 Module for ESS AudioDrive ES-18xx sound cards.
635 port - port # for ES-18xx chip (0x220,0x240,0x260)
636 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
637 fm_port - port # for FM (optional, not used)
638 irq - IRQ # for ES-18xx chip (5,7,9,10)
639 dma1 - first DMA # for ES-18xx chip (0,1,3)
640 dma2 - first DMA # for ES-18xx chip (0,1,3)
641 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
643 This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
644 port if native ISA PnP routines are not used).
645 When dma2 is equal with dma1, the driver works as half-duplex.
647 The power-management is supported.
652 Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
654 This module supports multiple cards and autoprobe.
656 The power-management is supported.
661 Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.
663 total_bufsize - total buffer size in kB (1-4096kB)
664 pcm_substreams_p - playback channels (1-8, default=2)
665 pcm_substreams_c - capture channels (1-8, default=0)
666 clock - clock (0 = auto-detection)
667 use_pm - support the power-management (0 = off, 1 = on,
669 enable_mpu - enable MPU401 (0 = off, 1 = on, 2 = auto (default))
670 joystick - enable joystick (default off)
672 This module supports multiple cards and autoprobe.
674 The power-management is supported.
679 Module for ForteMedia FM801 based PCI sound cards.
681 tea575x_tuner - Enable TEA575x tuner
682 - 1 = MediaForte 256-PCS
683 - 2 = MediaForte 256-PCPR
684 - 3 = MediaForte 64-PCR
685 - High 16-bits are video (radio) device number + 1
686 - example: 0x10002 (MediaForte 256-PCPR, device 1)
688 This module supports multiple cards and autoprobe.
690 The power-management is supported.
695 Module for Echoaudio Gina20
697 This module supports multiple cards.
698 The driver requires the firmware loader support on kernel.
703 Module for Echoaudio Gina24
705 This module supports multiple cards.
706 The driver requires the firmware loader support on kernel.
708 Module snd-gusclassic
709 ---------------------
711 Module for Gravis UltraSound Classic sound card.
713 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
714 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
715 dma1 - DMA # for GF1 chip (1,3,5,6,7)
716 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
717 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
718 voices - GF1 voices limit (14-32)
719 pcm_voices - reserved PCM voices
721 This module supports multiple cards and autoprobe.
723 Module snd-gusextreme
724 ---------------------
726 Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.
728 port - port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
729 gf1_port - port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)
730 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
731 irq - IRQ # for ES-1688 chip (5,7,9,10)
732 gf1_irq - IRQ # for GF1 chip (3,5,9,11,12,15)
733 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
734 dma8 - DMA # for ES-1688 chip (0,1,3)
735 dma1 - DMA # for GF1 chip (1,3,5,6,7)
736 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
737 voices - GF1 voices limit (14-32)
738 pcm_voices - reserved PCM voices
740 This module supports multiple cards and autoprobe (without MPU-401 port).
745 Module for Gravis UltraSound MAX sound card.
747 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
748 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
749 dma1 - DMA # for GF1 chip (1,3,5,6,7)
750 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
751 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
752 voices - GF1 voices limit (14-32)
753 pcm_voices - reserved PCM voices
755 This module supports multiple cards and autoprobe.
760 Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
761 ATI SB450, SB600, RS600,
765 model - force the model name
766 position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
767 probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
768 single_cmd - Use single immediate commands to communicate with
769 codecs (for debugging only)
770 enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
772 This module supports one card and autoprobe.
774 Each codec may have a model table for different configurations.
775 If your machine isn't listed there, the default (usually minimal)
776 configuration is set up. You can pass "model=<name>" option to
777 specify a certain model in such a case. There are different
778 models depending on the codec chip.
780 Model name Description
781 ---------- -----------
783 3stack 3-jack in back and a headphone out
784 3stack-digout 3-jack in back, a HP out and a SPDIF out
785 5stack 5-jack in back, 2-jack in front
786 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
787 6stack 6-jack in back, 2-jack in front
788 6stack-digout 6-jack with a SPDIF out
790 z71v 3-jack (HP shared SPDIF)
791 asus 3-jack (ASUS Mobo)
793 asus-dig ASUS with SPDIF out
794 asus-dig2 ASUS with SPDIF out (using GPIO2)
796 fujitsu Fujitsu Laptops (Pi1536)
798 lg LG laptop (m1 express dual)
799 lg-lw LG LW20/LW25 laptop
801 clevo Clevo laptops (m520G, m665n)
802 test for testing/debugging purpose, almost all controls can be
803 adjusted. Appearing only when compiled with
805 auto auto-config reading BIOS (default)
809 hp-3013 HP machines (3013-variant)
810 fujitsu Fujitsu S7020
812 basic fixed pin assignment (old default model)
813 auto auto-config reading BIOS (default)
816 fujitsu Fujitsu Laptop
817 hp-bpc HP xw4400/6400/8400/9400 laptops
818 hp-bpc-d7000 HP BPC D7000
820 hippo Hippo (ATI) with jack detection, Sony UX-90s
821 hippo_1 Hippo (Benq) with jack detection
822 basic fixed pin assignment w/o SPDIF
823 auto auto-config reading BIOS (default)
827 auto auto-config reading BIOS (default)
830 3stack-dig 3-jack with SPDIF I/O
831 6stack-dig 6-jack digital with SPDIF I/O
833 macpro MacPro support
835 auto auto-config reading BIOS (default)
838 3stack-dig 3-jack with SPDIF I/O
839 6stack-dig 6-jack digital with SPDIF I/O
840 3stack-6ch 3-jack 6-channel
841 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
842 6stack-dig-demo 6-jack digital for Intel demo board
843 acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
844 medion Medion Laptops
846 targa-2ch-dig Targs/MSI with 2-channel
847 laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
848 auto auto-config reading BIOS (default)
852 3stack-dig 3-jack with SPDIF I/O
853 6stack-dig 6-jack with SPDIF I/O
854 3stack-660 3-jack (for ALC660)
855 uniwill-m31 Uniwill M31 laptop
856 toshiba Toshiba laptop support
857 asus Asus laptop support
858 asus-laptop ASUS F2/F3 laptops
859 auto auto-config reading BIOS (default)
863 3stack-dig 3-jack with SPDIF OUT
864 6stack-dig 6-jack with SPDIF OUT
865 3stack-660 3-jack (for ALC660VD)
866 lenovo Lenovo 3000 C200
867 auto auto-config reading BIOS (default)
870 minimal 3-jack in back
871 min_fp 3-jack in back, 2-jack in front
872 full 6-jack in back, 2-jack in front
873 full_dig 6-jack in back, 2-jack in front, SPDIF I/O
874 allout 5-jack in back, 2-jack in front, SPDIF out
875 auto auto-config reading BIOS (default)
878 3stack 3-stack mode (default)
885 basic 3-jack (default)
887 thinkpad Lenovo Thinkpad T60/X60/Z60
894 basic default configuration
895 thinkpad Lenovo Thinkpad T61/X61
898 6stack 6-jack, separate surrounds (default)
899 3stack 3-stack, shared surrounds
900 laptop 2-channel only (FSC V2060, Samsung M50)
901 laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J)
902 ultra 2-channel with EAPD (Samsung Ultra tablet PC)
906 6stack-dig ditto with SPDIF
908 3stack-dig ditto with SPDIF
909 laptop 3-jack with hp-jack automute
910 laptop-dig ditto with SPDIF
911 auto auto-config reading BIOS (default)
915 test for testing/debugging purpose, almost all controls
916 can be adjusted. Appearing only when compiled with
920 laptop Basic Laptop config
921 laptop-hp Laptop config for some HP models (subdevice 30A5)
922 laptop-eapd Laptop config with EAPD support
923 test for testing/debugging purpose, almost all controls
924 can be adjusted. Appearing only when compiled with
933 5stack D945 5stack + SPDIF
935 intel-mac-v1 Intel Mac Type 1
936 intel-mac-v2 Intel Mac Type 2
937 intel-mac-v3 Intel Mac Type 3
938 intel-mac-v4 Intel Mac Type 4
939 intel-mac-v5 Intel Mac Type 5
940 macmini Intel Mac Mini (equivalent with type 3)
941 macbook Intel Mac Book (eq. type 5)
942 macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
943 macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
944 imac-intel Intel iMac (eq. type 2)
945 imac-intel-20 Intel iMac (newer version) (eq. type 3)
948 ref Reference board, base config
949 m2-2 Some Gateway MX series laptops
950 m6 Some Gateway NX series laptops
951 pa6 Gateway NX860 series
953 STAC9227/9228/9229/927x
956 5stack D965 5stack + SPDIF
959 vaio Setup for VAIO FE550G/SZ110
960 vaio-ar Setup for VAIO AR
962 The model name "genric" is treated as a special case. When this
963 model is given, the driver uses the generic codec parser without
964 "codec-patch". It's sometimes good for testing and debugging.
966 If the default configuration doesn't work and one of the above
967 matches with your device, report it together with the PCI
968 subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
969 ML (see the section "Links and Addresses").
971 Note 2: If you get click noises on output, try the module option
972 position_fix=1 or 2. position_fix=1 will use the SD_LPIB
973 register value without FIFO size correction as the current
974 DMA pointer. position_fix=2 will make the driver to use
975 the position buffer instead of reading SD_LPIB register.
976 (Usually SD_LPLIB register is more accurate than the
979 NB: If you get many "azx_get_response timeout" messages at
980 loading, it's likely a problem of interrupts (e.g. ACPI irq
981 routing). Try to boot with options like "pci=noacpi". Also, you
982 can try "single_cmd=1" module option. This will switch the
983 communication method between HDA controller and codecs to the
984 single immediate commands instead of CORB/RIRB. Basically, the
985 single command mode is provided only for BIOS, and you won't get
986 unsolicited events, too. But, at least, this works independently
987 from the irq. Remember this is a last resort, and should be
988 avoided as much as possible...
990 MORE NOTES ON "azx_get_response timeout" PROBLEMS:
991 On some hardwares, you may need to add a proper probe_mask option
992 to avoid the "azx_get_response timeout" problem above, instead.
993 This occurs when the access to non-existing or non-working codec slot
994 (likely a modem one) causes a stall of the communication via HD-audio
995 bus. You can see which codec slots are probed by enabling
996 CONFIG_SND_DEBUG_DETECT, or simply from the file name of the codec
997 proc files. Then limit the slots to probe by probe_mask option.
998 For example, probe_mask=1 means to probe only the first slot, and
999 probe_mask=4 means only the third slot.
1001 The power-management is supported.
1006 Module for RME Hammerfall DSP audio interface(s)
1008 This module supports multiple cards.
1010 Note: The firmware data can be automatically loaded via hotplug
1011 when CONFIG_FW_LOADER is set. Otherwise, you need to load
1012 the firmware via hdsploader utility included in alsa-tools
1014 The firmware data is found in alsa-firmware package.
1016 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1017 module did formerly. It will allocate the buffers in advance
1018 when any HDSP cards are found. To make the buffer
1019 allocation sure, load snd-page-alloc module in the early
1020 stage of boot sequence. See "Early Buffer Allocation"
1026 Module for RME HDSP MADI board.
1028 precise_ptr - Enable precise pointer, or disable.
1029 line_outs_monitor - Send playback streams to analog outs by default.
1030 enable_monitor - Enable Analog Out on Channel 63/64 by default.
1032 See hdspm.txt for details.
1037 Module for Envy24 (ICE1712) based PCI sound cards.
1038 * MidiMan M Audio Delta 1010
1039 * MidiMan M Audio Delta 1010LT
1040 * MidiMan M Audio Delta DiO 2496
1041 * MidiMan M Audio Delta 66
1042 * MidiMan M Audio Delta 44
1043 * MidiMan M Audio Delta 410
1044 * MidiMan M Audio Audiophile 2496
1047 * TerraTec EWX 24/96
1048 * TerraTec DMX 6Fire
1050 * Hoontech SoundTrack DSP 24
1051 * Hoontech SoundTrack DSP 24 Value
1052 * Hoontech SoundTrack DSP 24 Media 7.1
1053 * Event Electronics, EZ8
1055 * Lionstracs, Mediastaton
1057 model - Use the given board model, one of the following:
1058 delta1010, dio2496, delta66, delta44, audiophile, delta410,
1059 delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
1060 dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
1061 phase88, mediastation
1062 omni - Omni I/O support for MidiMan M-Audio Delta44/66
1063 cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transceiver)
1064 in msec resolution, default value is 500 (0.5 sec)
1066 This module supports multiple cards and autoprobe. Note: The consumer part
1067 is not used with all Envy24 based cards (for example in the MidiMan Delta
1070 Note: The supported board is detected by reading EEPROM or PCI
1071 SSID (if EEPROM isn't available). You can override the
1072 model by passing "model" module option in case that the
1073 driver isn't configured properly or you want to try another
1079 Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
1080 * MidiMan M Audio Revolution 5.1
1081 * MidiMan M Audio Revolution 7.1
1082 * MidiMan M Audio Audiophile 192
1084 * TerraTec Aureon 5.1 Sky
1085 * TerraTec Aureon 7.1 Space
1086 * TerraTec Aureon 7.1 Universe
1089 * AudioTrak Prodigy 7.1
1090 * AudioTrak Prodigy 7.1LT
1091 * AudioTrak Prodigy 192
1093 * Albatron K8X800 Pro II
1094 * Chaintech ZNF3-150
1095 * Chaintech ZNF3-250
1100 model - Use the given board model, one of the following:
1101 revo51, revo71, amp2000, prodigy71, prodigy71lt,
1102 prodigy192, aureon51, aureon71, universe, ap192,
1103 k8x800, phase22, phase28, ms300, av710
1105 This module supports multiple cards and autoprobe.
1107 Note: The supported board is detected by reading EEPROM or PCI
1108 SSID (if EEPROM isn't available). You can override the
1109 model by passing "model" module option in case that the
1110 driver isn't configured properly or you want to try another
1116 Module for Echoaudio Indigo
1118 This module supports multiple cards.
1119 The driver requires the firmware loader support on kernel.
1124 Module for Echoaudio Indigo DJ
1126 This module supports multiple cards.
1127 The driver requires the firmware loader support on kernel.
1132 Module for Echoaudio Indigo IO
1134 This module supports multiple cards.
1135 The driver requires the firmware loader support on kernel.
1140 Module for AC'97 motherboards from Intel and compatibles.
1141 * Intel i810/810E, i815, i820, i830, i84x, MX440
1142 ICH5, ICH6, ICH7, ESB2
1143 * SiS 7012 (SiS 735)
1144 * NVidia NForce, NForce2, NForce3, MCP04, CK804
1146 * AMD AMD768, AMD8111
1149 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1150 ac97_quirk - AC'97 workaround for strange hardware
1151 See "AC97 Quirk Option" section below.
1152 buggy_irq - Enable workaround for buggy interrupts on some
1153 motherboards (default yes on nForce chips,
1155 buggy_semaphore - Enable workaround for hardwares with buggy
1156 semaphores (e.g. on some ASUS laptops)
1158 spdif_aclink - Use S/PDIF over AC-link instead of direct connection
1159 from the controller chip
1160 (0 = off, 1 = on, -1 = default)
1162 This module supports one chip and autoprobe.
1164 Note: the latest driver supports auto-detection of chip clock.
1165 if you still encounter too fast playback, specify the clock
1166 explicitly via the module option "ac97_clock=41194".
1168 Joystick/MIDI ports are not supported by this driver. If your
1169 motherboard has these devices, use the ns558 or snd-mpu401
1170 modules, respectively.
1172 The power-management is supported.
1174 Module snd-intel8x0m
1175 --------------------
1177 Module for Intel ICH (i8x0) chipset MC97 modems.
1178 * Intel i810/810E, i815, i820, i830, i84x, MX440
1180 * SiS 7013 (SiS 735)
1181 * NVidia NForce, NForce2, NForce2s, NForce3
1185 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1187 This module supports one card and autoprobe.
1189 Note: The default index value of this module is -2, i.e. the first
1192 The power-management is supported.
1194 Module snd-interwave
1195 --------------------
1197 Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
1198 and other sound cards based on AMD InterWave (tm) chip.
1200 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1201 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1202 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1203 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1204 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1205 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1206 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1207 effect - 1 = InterWave effects enable (default 0);
1210 This module supports multiple cards, autoprobe and ISA PnP.
1212 Module snd-interwave-stb
1213 ------------------------
1215 Module for UltraSound 32-Pro (sound card from STB used by Compaq)
1216 and other sound cards based on AMD InterWave (tm) chip with TEA6330T
1217 circuit for extended control of bass, treble and master volume.
1219 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1220 port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
1221 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1222 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1223 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1224 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1225 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1226 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1227 effect - 1 = InterWave effects enable (default 0);
1230 This module supports multiple cards, autoprobe and ISA PnP.
1235 Module for Korg 1212 IO PCI card
1237 This module supports multiple cards.
1242 Module for Echoaudio Layla20
1244 This module supports multiple cards.
1245 The driver requires the firmware loader support on kernel.
1250 Module for Echoaudio Layla24
1252 This module supports multiple cards.
1253 The driver requires the firmware loader support on kernel.
1258 Module for Allegro/Maestro3 chips
1260 external_amp - enable external amp (enabled by default)
1261 amp_gpio - GPIO pin number for external amp (0-15) or
1262 -1 for default pin (8 for allegro, 1 for
1265 This module supports autoprobe and multiple chips.
1267 Note: the binding of amplifier is dependent on hardware.
1268 If there is no sound even though all channels are unmuted, try to
1269 specify other gpio connection via amp_gpio option.
1270 For example, a Panasonic notebook might need "amp_gpio=0x0d"
1273 The power-management is supported.
1278 Module for Echoaudio Mia
1280 This module supports multiple cards.
1281 The driver requires the firmware loader support on kernel.
1286 Module for Miro soundcards: miroSOUND PCM 1 pro,
1288 miroSOUND PCM 20 Radio.
1290 port - Port # (0x530,0x604,0xe80,0xf40)
1291 irq - IRQ # (5,7,9,10,11)
1292 dma1 - 1st dma # (0,1,3)
1293 dma2 - 2nd dma # (0,1)
1294 mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
1295 mpu_irq - MPU-401 irq # (5,7,9,10)
1296 fm_port - FM Port # (0x388)
1297 wss - enable WSS mode
1298 ide - enable onboard ide support
1303 Module for Digigram miXart8 sound cards.
1305 This module supports multiple cards.
1306 Note: One miXart8 board will be represented as 4 alsa cards.
1307 See MIXART.txt for details.
1309 When the driver is compiled as a module and the hotplug firmware
1310 is supported, the firmware data is loaded via hotplug automatically.
1311 Install the necessary firmware files in alsa-firmware package.
1312 When no hotplug fw loader is available, you need to load the
1313 firmware via mixartloader utility in alsa-tools package.
1318 Module for Echoaudio Mona
1320 This module supports multiple cards.
1321 The driver requires the firmware loader support on kernel.
1326 Module for MPU-401 UART devices.
1328 port - port number or -1 (disable)
1329 irq - IRQ number or -1 (disable)
1330 pnp - PnP detection - 0 = disable, 1 = enable (default)
1331 uart_enter - Issue UART_ENTER command at open - bool, default = on
1333 This module supports multiple devices and PnP.
1338 Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel
1341 port - I/O port # for MTPAV (0x378,0x278, default=0x378)
1342 irq - IRQ # for MTPAV (7,5, default=7)
1343 hwports - number of supported hardware ports, default=8.
1345 Module supports only 1 card. This module has no enable option.
1350 Module for Ego Systems (ESI) Miditerminal 4140
1352 This module supports multiple devices.
1353 Requires parport (CONFIG_PARPORT).
1358 Module for NeoMagic NM256AV/ZX chips
1360 playback_bufsize - max playback frame size in kB (4-128kB)
1361 capture_bufsize - max capture frame size in kB (4-128kB)
1362 force_ac97 - 0 or 1 (disabled by default)
1363 buffer_top - specify buffer top address
1364 use_cache - 0 or 1 (disabled by default)
1365 vaio_hack - alias buffer_top=0x25a800
1366 reset_workaround - enable AC97 RESET workaround for some laptops
1367 reset_workaround2 - enable extended AC97 RESET workaround for some
1370 This module supports one chip and autoprobe.
1372 The power-management is supported.
1374 Note: on some notebooks the buffer address cannot be detected
1375 automatically, or causes hang-up during initialization.
1376 In such a case, specify the buffer top address explicitly via
1377 the buffer_top option.
1379 Sony F250: buffer_top=0x25a800
1380 Sony F270: buffer_top=0x272800
1381 The driver supports only ac97 codec. It's possible to force
1382 to initialize/use ac97 although it's not detected. In such a
1383 case, use force_ac97=1 option - but *NO* guarantee whether it
1386 Note: The NM256 chip can be linked internally with non-AC97
1387 codecs. This driver supports only the AC97 codec, and won't work
1388 with machines with other (most likely CS423x or OPL3SAx) chips,
1389 even though the device is detected in lspci. In such a case, try
1390 other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
1391 but some doesn't have ISA PnP. You'll need to specify isapnp=0
1392 and proper hardware parameters in the case without ISA PnP.
1394 Note: some laptops need a workaround for AC97 RESET. For the
1395 known hardware like Dell Latitude LS and Sony PCG-F305, this
1396 workaround is enabled automatically. For other laptops with a
1397 hard freeze, you can try reset_workaround=1 option.
1399 Note: Dell Latitude CSx laptops have another problem regarding
1400 AC97 RESET. On these laptops, reset_workaround2 option is
1401 turned on as default. This option is worth to try if the
1402 previous reset_workaround option doesn't help.
1404 Note: This driver is really crappy. It's a porting from the
1405 OSS driver, which is a result of black-magic reverse engineering.
1406 The detection of codec will fail if the driver is loaded *after*
1407 X-server as described above. You might be able to force to load
1408 the module, but it may result in hang-up. Hence, make sure that
1409 you load this module *before* X if you encounter this kind of
1415 Module for Yamaha OPL3-SA2/SA3 sound cards.
1417 port - control port # for OPL3-SA chip (0x370)
1418 sb_port - SB port # for OPL3-SA chip (0x220,0x240)
1419 wss_port - WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
1420 midi_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1421 fm_port - FM port # for OPL3-SA chip (0x388), -1 = disable
1422 irq - IRQ # for OPL3-SA chip (5,7,9,10)
1423 dma1 - first DMA # for Yamaha OPL3-SA chip (0,1,3)
1424 dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1425 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1427 This module supports multiple cards and ISA PnP. It does not support
1428 autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
1430 The power-management is supported.
1432 Module snd-opti92x-ad1848
1433 -------------------------
1435 Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
1436 Module works with OAK Mozart cards as well.
1438 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1439 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1440 fm_port - port # for OPL3 device (0x388)
1441 irq - IRQ # for WSS chip (5,7,9,10,11)
1442 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1443 dma1 - first DMA # for WSS chip (0,1,3)
1445 This module supports only one card, autoprobe and PnP.
1447 Module snd-opti92x-cs4231
1448 -------------------------
1450 Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
1452 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1453 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1454 fm_port - port # for OPL3 device (0x388)
1455 irq - IRQ # for WSS chip (5,7,9,10,11)
1456 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1457 dma1 - first DMA # for WSS chip (0,1,3)
1458 dma2 - second DMA # for WSS chip (0,1,3)
1460 This module supports only one card, autoprobe and PnP.
1465 Module for sound cards based on OPTi 82c93x chips.
1467 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1468 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1469 fm_port - port # for OPL3 device (0x388)
1470 irq - IRQ # for WSS chip (5,7,9,10,11)
1471 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1472 dma1 - first DMA # for WSS chip (0,1,3)
1473 dma2 - second DMA # for WSS chip (0,1,3)
1475 This module supports only one card, autoprobe and PnP.
1480 Module for Digigram PCXHR boards
1482 This module supports multiple cards.
1484 Module snd-portman2x4
1485 ---------------------
1487 Module for Midiman Portman 2x4 parallel port MIDI interface
1489 This module supports multiple cards.
1491 Module snd-powermac (on ppc only)
1492 ---------------------------------
1494 Module for PowerMac, iMac and iBook on-board soundchips
1496 enable_beep - enable beep using PCM (enabled as default)
1498 Module supports autoprobe a chip.
1500 Note: the driver may have problems regarding endianess.
1502 The power-management is supported.
1504 Module snd-pxa2xx-ac97 (on arm only)
1505 ------------------------------------
1507 Module for AC97 driver for the Intel PXA2xx chip
1509 For ARM architecture only.
1511 The power-management is supported.
1516 Module for Conexant Riptide chip
1518 joystick_port - Joystick port # (default: 0x200)
1519 mpu_port - MPU401 port # (default: 0x330)
1520 opl3_port - OPL3 port # (default: 0x388)
1522 This module supports multiple cards.
1523 The driver requires the firmware loader support on kernel.
1524 You need to install the firmware file "riptide.hex" to the standard
1525 firmware path (e.g. /lib/firmware).
1530 Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32,
1531 Prodif96 and Prodif Gold) sound cards.
1533 This module supports multiple cards.
1538 Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.
1540 This module supports multiple cards.
1545 Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.
1547 precise_ptr - Enable precise pointer (doesn't work reliably).
1550 This module supports multiple cards.
1552 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1553 module did formerly. It will allocate the buffers in advance
1554 when any RME9652 cards are found. To make the buffer
1555 allocation sure, load snd-page-alloc module in the early
1556 stage of boot sequence. See "Early Buffer Allocation"
1559 Module snd-sa11xx-uda1341 (on arm only)
1560 ---------------------------------------
1562 Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card.
1564 Module supports only one card.
1565 Module has no enable and index options.
1567 The power-management is supported.
1572 Module for 8-bit SoundBlaster cards: SoundBlaster 1.0,
1576 port - port # for SB DSP chip (0x220,0x240,0x260)
1577 irq - IRQ # for SB DSP chip (5,7,9,10)
1578 dma8 - DMA # for SB DSP chip (1,3)
1580 This module supports multiple cards and autoprobe.
1582 The power-management is supported.
1584 Module snd-sb16 and snd-sbawe
1585 -----------------------------
1587 Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
1588 SoundBlaster AWE 32 (PnP),
1589 SoundBlaster AWE 64 PnP
1591 port - port # for SB DSP 4.x chip (0x220,0x240,0x260)
1592 mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1593 awe_port - base port # for EMU8000 synthesizer (0x620,0x640,0x660)
1594 (snd-sbawe module only)
1595 irq - IRQ # for SB DSP 4.x chip (5,7,9,10)
1596 dma8 - 8-bit DMA # for SB DSP 4.x chip (0,1,3)
1597 dma16 - 16-bit DMA # for SB DSP 4.x chip (5,6,7)
1598 mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1599 csp - ASP/CSP chip support - 0 = disable (default), 1 = enable
1600 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1602 This module supports multiple cards, autoprobe and ISA PnP.
1604 Note: To use Vibra16X cards in 16-bit half duplex mode, you must
1605 disable 16bit DMA with dma16 = -1 module parameter.
1606 Also, all Sound Blaster 16 type cards can operate in 16-bit
1607 half duplex mode through 8-bit DMA channel by disabling their
1610 The power-management is supported.
1615 Module for Aztech Sound Galaxy sound card.
1617 sbport - Port # for SB16 interface (0x220,0x240)
1618 wssport - Port # for WSS interface (0x530,0xe80,0xf40,0x604)
1619 irq - IRQ # (7,9,10,11)
1622 This module supports multiple cards.
1624 The power-management is supported.
1629 Module for ENSONIQ SoundScape PnP cards.
1631 port - Port # (PnP setup)
1632 irq - IRQ # (PnP setup)
1633 mpu_irq - MPU-401 IRQ # (PnP setup)
1634 dma - DMA # (PnP setup)
1636 This module supports multiple cards. ISA PnP must be enabled.
1637 You need sscape_ctl tool in alsa-tools package for loading
1640 Module snd-sun-amd7930 (on sparc only)
1641 --------------------------------------
1643 Module for AMD7930 sound chips found on Sparcs.
1645 This module supports multiple cards.
1647 Module snd-sun-cs4231 (on sparc only)
1648 -------------------------------------
1650 Module for CS4231 sound chips found on Sparcs.
1652 This module supports multiple cards.
1654 Module snd-sun-dbri (on sparc only)
1655 -----------------------------------
1657 Module for DBRI sound chips found on Sparcs.
1659 This module supports multiple cards.
1661 Module snd-wavefront
1662 --------------------
1664 Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
1666 cs4232_pcm_port - Port # for CS4232 PCM interface.
1667 cs4232_pcm_irq - IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
1668 cs4232_mpu_port - Port # for CS4232 MPU-401 interface.
1669 cs4232_mpu_irq - IRQ # for CS4232 MPU-401 interface (9,11,12,15).
1670 use_cs4232_midi - Use CS4232 MPU-401 interface
1671 (inaccessibly located inside your computer)
1672 ics2115_port - Port # for ICS2115
1673 ics2115_irq - IRQ # for ICS2115
1674 fm_port - FM OPL-3 Port #
1675 dma1 - DMA1 # for CS4232 PCM interface.
1676 dma2 - DMA2 # for CS4232 PCM interface.
1677 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1679 This module supports multiple cards and ISA PnP.
1681 Module snd-sonicvibes
1682 ---------------------
1684 Module for S3 SonicVibes PCI sound cards.
1685 * PINE Schubert 32 PCI
1687 reverb - Reverb Enable - 1 = enable, 0 = disable (default)
1688 - SoundCard must have onboard SRAM for this.
1689 mge - Mic Gain Enable - 1 = enable, 0 = disable (default)
1691 This module supports multiple cards and autoprobe.
1693 Module snd-serial-u16550
1694 ------------------------
1696 Module for UART16550A serial MIDI ports.
1698 port - port # for UART16550A chip
1699 irq - IRQ # for UART16550A chip, -1 = poll mode
1700 speed - speed in bauds (9600,19200,38400,57600,115200)
1702 base - base for divisor in bauds (57600,115200,230400,460800)
1704 outs - number of MIDI ports in a serial port (1-4)
1706 adaptor - Type of adaptor.
1707 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
1708 3 = MS-124W M/B, 4 = Generic
1710 This module supports multiple cards. This module does not support autoprobe
1711 thus the main port must be specified!!! Other options are optional.
1716 Module for Trident 4DWave DX/NX sound cards.
1717 * Best Union Miss Melody 4DWave PCI
1719 * Warpspeed ONSpeed 4DWave PCI
1722 * CHIC True Sound 4Dwave
1723 * Shark Predator4D-PCI
1724 * Jaton SonicWave 4D
1726 pcm_channels - max channels (voices) reserved for PCM
1727 wavetable_size - max wavetable size in kB (4-?kb)
1729 This module supports multiple cards and autoprobe.
1731 The power-management is supported.
1733 Module snd-usb-audio
1734 --------------------
1736 Module for USB audio and USB MIDI devices.
1738 vid - Vendor ID for the device (optional)
1739 pid - Product ID for the device (optional)
1740 device_setup - Device specific magic number (optional)
1741 - Influence depends on the device
1744 This module supports multiple devices, autoprobe and hotplugging.
1746 Module snd-usb-caiaq
1747 --------------------
1749 Module for caiaq UB audio interfaces,
1750 * Native Instruments RigKontrol2
1751 * Native Instruments Kore Controller
1752 * Native Instruments Audio Kontrol 1
1753 * Native Instruments Audio 8 DJ
1755 This module supports multiple devices, autoprobe and hotplugging.
1757 Module snd-usb-usx2y
1758 --------------------
1760 Module for Tascam USB US-122, US-224 and US-428 devices.
1762 This module supports multiple devices, autoprobe and hotplugging.
1764 Note: you need to load the firmware via usx2yloader utility included
1765 in alsa-tools and alsa-firmware packages.
1770 Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
1771 8233A, 8233C, 8235, 8237 (south) bridge.
1773 mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
1775 joystick - Enable joystick (default off) [VIA686A/686B only]
1776 ac97_clock - AC'97 codec clock base (default 48000Hz)
1777 dxs_support - support DXS channels,
1778 0 = auto (default), 1 = enable, 2 = disable,
1779 3 = 48k only, 4 = no VRA, 5 = enable any sample
1780 rate and different sample rates on different
1782 [VIA8233/C, 8235, 8237 only]
1783 ac97_quirk - AC'97 workaround for strange hardware
1784 See "AC97 Quirk Option" section below.
1786 This module supports one chip and autoprobe.
1788 Note: on some SMP motherboards like MSI 694D the interrupts might
1789 not be generated properly. In such a case, please try to
1790 set the SMP (or MPS) version on BIOS to 1.1 instead of
1791 default value 1.4. Then the interrupt number will be
1792 assigned under 15. You might also upgrade your BIOS.
1794 Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
1795 channels as the first PCM. On these channels, up to 4
1796 streams can be played at the same time, and the controller
1797 can perform sample rate conversion with separate rates for
1799 As default (dxs_support = 0), 48k fixed rate is chosen
1800 except for the known devices since the output is often
1801 noisy except for 48k on some mother boards due to the
1803 Please try once dxs_support=5 and if it works on other
1804 sample rates (e.g. 44.1kHz of mp3 playback), please let us
1805 know the PCI subsystem vendor/device id's (output of
1807 If dxs_support=5 does not work, try dxs_support=4; if it
1808 doesn't work too, try dxs_support=1. (dxs_support=1 is
1809 usually for old motherboards. The correct implemented
1810 board should work with 4 or 5.) If it still doesn't
1811 work and the default setting is ok, dxs_support=3 is the
1812 right choice. If the default setting doesn't work at all,
1813 try dxs_support=2 to disable the DXS channels.
1814 In any cases, please let us know the result and the
1815 subsystem vendor/device ids. See "Links and Addresses"
1818 Note: for the MPU401 on VIA823x, use snd-mpu401 driver
1819 additionally. The mpu_port option is for VIA686 chips only.
1821 The power-management is supported.
1823 Module snd-via82xx-modem
1824 ------------------------
1826 Module for VIA82xx AC97 modem
1828 ac97_clock - AC'97 codec clock base (default 48000Hz)
1830 This module supports one card and autoprobe.
1832 Note: The default index value of this module is -2, i.e. the first
1835 The power-management is supported.
1840 Module for virtual rawmidi devices.
1841 This module creates virtual rawmidi devices which communicate
1842 to the corresponding ALSA sequencer ports.
1844 midi_devs - MIDI devices # (1-4, default=4)
1846 This module supports multiple cards.
1851 Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards.
1853 mic - Enable Microphone on V222 Mic (NYI)
1854 ibl - Capture IBL size. (default = 0, minimum size)
1856 This module supports multiple cards.
1858 When the driver is compiled as a module and the hotplug firmware
1859 is supported, the firmware data is loaded via hotplug automatically.
1860 Install the necessary firmware files in alsa-firmware package.
1861 When no hotplug fw loader is available, you need to load the
1862 firmware via vxloader utility in alsa-tools package. To invoke
1863 vxloader automatically, add the following to /etc/modprobe.conf
1865 install snd-vx222 /sbin/modprobe --first-time -i snd-vx222 && /usr/bin/vxloader
1867 (for 2.2/2.4 kernels, add "post-install /usr/bin/vxloader" to
1868 /etc/modules.conf, instead.)
1869 IBL size defines the interrupts period for PCM. The smaller size
1870 gives smaller latency but leads to more CPU consumption, too.
1871 The size is usually aligned to 126. As default (=0), the smallest
1872 size is chosen. The possible IBL values can be found in
1873 /proc/asound/cardX/vx-status proc file.
1875 The power-management is supported.
1880 Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
1882 ibl - Capture IBL size. (default = 0, minimum size)
1884 This module supports multiple cards. The module is compiled only when
1885 PCMCIA is supported on kernel.
1887 With the older 2.6.x kernel, to activate the driver via the card
1888 manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the
1889 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no
1890 longer require a config file.
1892 When the driver is compiled as a module and the hotplug firmware
1893 is supported, the firmware data is loaded via hotplug automatically.
1894 Install the necessary firmware files in alsa-firmware package.
1895 When no hotplug fw loader is available, you need to load the
1896 firmware via vxloader utility in alsa-tools package.
1898 About capture IBL, see the description of snd-vx222 module.
1900 Note: snd-vxp440 driver is merged to snd-vxpocket driver since
1903 The power-management is supported.
1908 Module for Yamaha PCI chips (YMF72x, YMF74x & YMF75x).
1910 mpu_port - 0x300,0x330,0x332,0x334, 0 (disable) by default,
1911 1 (auto-detect for YMF744/754 only)
1912 fm_port - 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
1913 1 (auto-detect for YMF744/754 only)
1914 joystick_port - 0x201,0x202,0x204,0x205, 0 (disable) by default,
1916 rear_switch - enable shared rear/line-in switch (bool)
1918 This module supports autoprobe and multiple chips.
1920 The power-management is supported.
1922 Module snd-pdaudiocf
1923 --------------------
1925 Module for Sound Core PDAudioCF sound card.
1927 The power-management is supported.
1933 The ac97_quirk option is used to enable/override the workaround for
1934 specific devices on drivers for on-board AC'97 controllers like
1935 snd-intel8x0. Some hardware have swapped output pins between Master
1936 and Headphone, or Surround (thanks to confusion of AC'97
1937 specifications from version to version :-)
1939 The driver provides the auto-detection of known problematic devices,
1940 but some might be unknown or wrongly detected. In such a case, pass
1941 the proper value with this option.
1943 The following strings are accepted:
1944 - default Don't override the default setting
1945 - none Disable the quirk
1946 - hp_only Bind Master and Headphone controls as a single control
1947 - swap_hp Swap headphone and master controls
1948 - swap_surround Swap master and surround controls
1949 - ad_sharing For AD1985, turn on OMS bit and use headphone
1950 - alc_jack For ALC65x, turn on the jack sense mode
1951 - inv_eapd Inverted EAPD implementation
1952 - mute_led Bind EAPD bit for turning on/off mute LED
1954 For backward compatibility, the corresponding integer value -1, 0,
1955 ... are accepted, too.
1957 For example, if "Master" volume control has no effect on your device
1958 but only "Headphone" does, pass ac97_quirk=hp_only module option.
1961 Configuring Non-ISAPNP Cards
1962 ============================
1964 When the kernel is configured with ISA-PnP support, the modules
1965 supporting the isapnp cards will have module options "isapnp".
1966 If this option is set, *only* the ISA-PnP devices will be probed.
1967 For probing the non ISA-PnP cards, you have to pass "isapnp=0" option
1968 together with the proper i/o and irq configuration.
1970 When the kernel is configured without ISA-PnP support, isapnp option
1971 will be not built in.
1974 Module Autoloading Support
1975 ==========================
1977 The ALSA drivers can be loaded automatically on demand by defining
1978 module aliases. The string 'snd-card-%1' is requested for ALSA native
1979 devices where %i is sound card number from zero to seven.
1981 To auto-load an ALSA driver for OSS services, define the string
1982 'sound-slot-%i' where %i means the slot number for OSS, which
1983 corresponds to the card index of ALSA. Usually, define this
1984 as the same card module.
1986 An example configuration for a single emu10k1 card is like below:
1987 ----- /etc/modprobe.conf
1988 alias snd-card-0 snd-emu10k1
1989 alias sound-slot-0 snd-emu10k1
1990 ----- /etc/modprobe.conf
1992 The available number of auto-loaded sound cards depends on the module
1993 option "cards_limit" of snd module. As default it's set to 1.
1994 To enable the auto-loading of multiple cards, specify the number of
1995 sound cards in that option.
1997 When multiple cards are available, it'd better to specify the index
1998 number for each card via module option, too, so that the order of
1999 cards is kept consistent.
2001 An example configuration for two sound cards is like below:
2003 ----- /etc/modprobe.conf
2005 options snd cards_limit=2
2006 alias snd-card-0 snd-interwave
2007 alias snd-card-1 snd-ens1371
2008 options snd-interwave index=0
2009 options snd-ens1371 index=1
2011 alias sound-slot-0 snd-interwave
2012 alias sound-slot-1 snd-ens1371
2013 ----- /etc/modprobe.conf
2015 In this example, the interwave card is always loaded as the first card
2016 (index 0) and ens1371 as the second (index 1).
2019 ALSA PCM devices to OSS devices mapping
2020 =======================================
2022 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4
2023 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3
2024 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12
2025 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20
2026 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19
2027 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28
2028 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36
2029 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39
2030 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44
2032 The first number from /dev/snd/pcmC{X}D{Y}[c|p] expression means
2033 sound card number and second means device number. The ALSA devices
2034 have either 'c' or 'p' suffix indicating the direction, capture and
2035 playback, respectively.
2037 Please note that the device mapping above may be varied via the module
2038 options of snd-pcm-oss module.
2041 Proc interfaces (/proc/asound)
2042 ==============================
2044 /proc/asound/card#/pcm#[cp]/oss
2045 -------------------------------
2046 String "erase" - erase all additional informations about OSS applications
2047 String "<app_name> <fragments> <fragment_size> [<options>]"
2049 <app_name> - name of application with (higher priority) or without path
2050 <fragments> - number of fragments or zero if auto
2051 <fragment_size> - size of fragment in bytes or zero if auto
2052 <options> - optional parameters
2053 - disable the application tries to open a pcm device for
2054 this channel but does not want to use it.
2055 (Cause a bug or mmap needs)
2056 It's good for Quake etc...
2057 - direct don't use plugins
2058 - block force block mode (rvplayer)
2059 - non-block force non-block mode
2060 - whole-frag write only whole fragments (optimization affecting
2062 - no-silence do not fill silence ahead to avoid clicks
2063 - buggy-ptr Returns the whitespace blocks in GETOPTR ioctl
2064 instead of filled blocks
2066 Example: echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss
2067 echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss
2068 echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
2071 Early Buffer Allocation
2072 =======================
2074 Some drivers (e.g. hdsp) require the large contiguous buffers, and
2075 sometimes it's too late to find such spaces when the driver module is
2076 actually loaded due to memory fragmentation. You can pre-allocate the
2077 PCM buffers by loading snd-page-alloc module and write commands to its
2078 proc file in prior, for example, in the early boot stage like
2079 /etc/init.d/*.local scripts.
2081 Reading the proc file /proc/drivers/snd-page-alloc shows the current
2082 usage of page allocation. In writing, you can send the following
2083 commands to the snd-page-alloc driver:
2085 - add VENDOR DEVICE MASK SIZE BUFFERS
2087 VENDOR and DEVICE are PCI vendor and device IDs. They take
2088 integer numbers (0x prefix is needed for the hex).
2089 MASK is the PCI DMA mask. Pass 0 if not restricted.
2090 SIZE is the size of each buffer to allocate. You can pass
2091 k and m suffix for KB and MB. The max number is 16MB.
2092 BUFFERS is the number of buffers to allocate. It must be greater
2093 than 0. The max number is 4.
2097 This will erase the all pre-allocated buffers which are not in
2104 ALSA project homepage
2105 http://www.alsa-project.org
2107 ALSA Bug Tracking System
2108 https://bugtrack.alsa-project.org/bugs/
2111 mailto:alsa-devel@alsa-project.org