8 # To see a list of typical targets execute "make help"
9 # More info can be located in ./README
10 # Comments in this file are targeted only to the developer, do not
11 # expect to learn how to build the kernel reading this file.
14 # o use make's built-in rules and variables
15 # (this increases performance and avoids hard-to-debug behaviour);
16 # o print "Entering directory ...";
17 MAKEFLAGS += -rR --no-print-directory
19 # Avoid funny character set dependencies
23 export LC_COLLATE LC_NUMERIC
25 # We are using a recursive build, so we need to do a little thinking
26 # to get the ordering right.
28 # Most importantly: sub-Makefiles should only ever modify files in
29 # their own directory. If in some directory we have a dependency on
30 # a file in another dir (which doesn't happen often, but it's often
31 # unavoidable when linking the built-in.o targets which finally
32 # turn into vmlinux), we will call a sub make in that other dir, and
33 # after that we are sure that everything which is in that other dir
36 # The only cases where we need to modify files which have global
37 # effects are thus separated out and done before the recursive
38 # descending is started. They are now explicitly listed as the
41 # To put more focus on warnings, be less verbose as default
42 # Use 'make V=1' to see the full commands
44 ifeq ("$(origin V)", "command line")
51 # Call a source code checker (by default, "sparse") as part of the
54 # Use 'make C=1' to enable checking of only re-compiled files.
55 # Use 'make C=2' to enable checking of *all* source files, regardless
56 # of whether they are re-compiled or not.
58 # See the file "Documentation/sparse.txt" for more details, including
59 # where to get the "sparse" utility.
61 ifeq ("$(origin C)", "command line")
62 KBUILD_CHECKSRC = $(C)
64 ifndef KBUILD_CHECKSRC
68 # Use make M=dir to specify directory of external module to build
69 # Old syntax make ... SUBDIRS=$PWD is still supported
70 # Setting the environment variable KBUILD_EXTMOD take precedence
72 KBUILD_EXTMOD ?= $(SUBDIRS)
75 ifeq ("$(origin M)", "command line")
79 # kbuild supports saving output files in a separate directory.
80 # To locate output files in a separate directory two syntaxes are supported.
81 # In both cases the working directory must be the root of the kernel src.
83 # Use "make O=dir/to/store/output/files/"
85 # 2) Set KBUILD_OUTPUT
86 # Set the environment variable KBUILD_OUTPUT to point to the directory
87 # where the output files shall be placed.
88 # export KBUILD_OUTPUT=dir/to/store/output/files/
91 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
95 # KBUILD_SRC is set on invocation of make in OBJ directory
96 # KBUILD_SRC is not intended to be used by the regular user (for now)
99 # OK, Make called in directory where kernel src resides
100 # Do we want to locate output files in a separate directory?
101 ifeq ("$(origin O)", "command line")
102 KBUILD_OUTPUT := $(O)
105 ifeq ("$(origin W)", "command line")
106 export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
109 # That's our default target when none is given on the command line
113 # Cancel implicit rules on top Makefile
114 $(CURDIR)/Makefile Makefile: ;
116 ifneq ($(KBUILD_OUTPUT),)
117 # Invoke a second make in the output directory, passing relevant variables
118 # check that the output directory actually exists
119 saved-output := $(KBUILD_OUTPUT)
120 KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
121 $(if $(KBUILD_OUTPUT),, \
122 $(error output directory "$(saved-output)" does not exist))
124 PHONY += $(MAKECMDGOALS) sub-make
126 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
130 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
131 KBUILD_SRC=$(CURDIR) \
132 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
133 $(filter-out _all sub-make,$(MAKECMDGOALS))
135 # Leave processing to above invocation of make
137 endif # ifneq ($(KBUILD_OUTPUT),)
138 endif # ifeq ($(KBUILD_SRC),)
140 # We process the rest of the Makefile if this is the final invocation of make
141 ifeq ($(skip-makefile),)
143 # If building an external module we do not care about the all: rule
144 # but instead _all depend on modules
146 ifeq ($(KBUILD_EXTMOD),)
152 srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
157 VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
159 export srctree objtree VPATH
162 # SUBARCH tells the usermode build what the underlying arch is. That is set
163 # first, and if a usermode build is happening, the "ARCH=um" on the command
164 # line overrides the setting of ARCH below. If a native build is happening,
165 # then ARCH is assigned, getting whatever value it gets normally, and
166 # SUBARCH is subsequently ignored.
168 SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
169 -e s/arm.*/arm/ -e s/sa110/arm/ \
170 -e s/s390x/s390/ -e s/parisc64/parisc/ \
171 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
174 # Cross compiling and selecting different set of gcc/bin-utils
175 # ---------------------------------------------------------------------------
177 # When performing cross compilation for other architectures ARCH shall be set
178 # to the target architecture. (See arch/* for the possibilities).
179 # ARCH can be set during invocation of make:
181 # Another way is to have ARCH set in the environment.
182 # The default ARCH is the host where make is executed.
184 # CROSS_COMPILE specify the prefix used for all executables used
185 # during compilation. Only gcc and related bin-utils executables
186 # are prefixed with $(CROSS_COMPILE).
187 # CROSS_COMPILE can be set on the command line
188 # make CROSS_COMPILE=ia64-linux-
189 # Alternatively CROSS_COMPILE can be set in the environment.
190 # A third alternative is to store a setting in .config so that plain
191 # "make" in the configured kernel build directory always uses that.
192 # Default value for CROSS_COMPILE is not to prefix executables
193 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
194 export KBUILD_BUILDHOST := $(SUBARCH)
196 #CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)
198 #CROSS_COMPILE :=/opt/android0320/mydroid/prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi-
199 CROSS_COMPILE ?=../toolchain/arm-eabi-4.4.0/bin/arm-eabi-
201 # Architecture as present in compile.h
202 UTS_MACHINE := $(ARCH)
205 # Additional ARCH settings for x86
209 ifeq ($(ARCH),x86_64)
213 # Additional ARCH settings for sparc
214 ifeq ($(ARCH),sparc32)
217 ifeq ($(ARCH),sparc64)
221 # Additional ARCH settings for sh
226 # Additional ARCH settings for tile
227 ifeq ($(ARCH),tilepro)
230 ifeq ($(ARCH),tilegx)
234 # Where to locate arch specific headers
235 hdr-arch := $(SRCARCH)
237 ifeq ($(ARCH),m68knommu)
241 KCONFIG_CONFIG ?= .config
242 export KCONFIG_CONFIG
244 # SHELL used by kbuild
245 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
246 else if [ -x /bin/bash ]; then echo /bin/bash; \
247 else echo sh; fi ; fi)
251 HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
254 # Decide whether to build built-in, modular, or both.
255 # Normally, just do built-in.
260 # If we have only "make modules", don't compile built-in objects.
261 # When we're building modules with modversions, we need to consider
262 # the built-in objects during the descend as well, in order to
263 # make sure the checksums are up to date before we record them.
265 ifeq ($(MAKECMDGOALS),modules)
266 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
269 # If we have "make <whatever> modules", compile modules
270 # in addition to whatever we do anyway.
271 # Just "make" or "make all" shall build modules as well
273 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
277 ifeq ($(MAKECMDGOALS),)
281 export KBUILD_MODULES KBUILD_BUILTIN
282 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
285 # ---------------------------------------------------------------------------
287 # Normally, we echo the whole command before executing it. By making
288 # that echo $($(quiet)$(cmd)), we now have the possibility to set
289 # $(quiet) to choose other forms of output instead, e.g.
291 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
292 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
294 # If $(quiet) is empty, the whole command will be printed.
295 # If it is set to "quiet_", only the short version will be printed.
296 # If it is set to "silent_", nothing will be printed at all, since
297 # the variable $(silent_cmd_cc_o_c) doesn't exist.
299 # A simple variant is to prefix commands with $(Q) - that's useful
300 # for commands that shall be hidden in non-verbose mode.
304 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
305 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
307 ifeq ($(KBUILD_VERBOSE),1)
315 # If the user is running make -s (silent mode), suppress echoing of
318 ifneq ($(findstring s,$(MAKEFLAGS)),)
322 export quiet Q KBUILD_VERBOSE
325 # Look for make include files relative to root of kernel src
326 MAKEFLAGS += --include-dir=$(srctree)
328 # We need some generic definitions (do not try to remake the file).
329 $(srctree)/scripts/Kbuild.include: ;
330 include $(srctree)/scripts/Kbuild.include
332 # Make variables (CC, etc...)
334 AS = $(CROSS_COMPILE)as
335 LD = $(CROSS_COMPILE)ld
336 CC = $(CROSS_COMPILE)gcc
338 AR = $(CROSS_COMPILE)ar
339 NM = $(CROSS_COMPILE)nm
340 STRIP = $(CROSS_COMPILE)strip
341 OBJCOPY = $(CROSS_COMPILE)objcopy
342 OBJDUMP = $(CROSS_COMPILE)objdump
344 GENKSYMS = scripts/genksyms/genksyms
345 INSTALLKERNEL := installkernel
346 DEPMOD = /sbin/depmod
347 KALLSYMS = scripts/kallsyms
351 CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
352 -Wbitwise -Wno-return-void $(CF)
358 CFLAGS_GCOV = -fprofile-arcs -ftest-coverage
361 # Use LINUXINCLUDE when you must reference the include/ directory.
362 # Needed to be compatible with the O= option
363 LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include \
364 -Iarch/$(hdr-arch)/include/generated -Iinclude \
365 $(if $(KBUILD_SRC), -I$(srctree)/include) \
366 -include include/generated/autoconf.h
368 KBUILD_CPPFLAGS := -D__KERNEL__
370 KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
371 -fno-strict-aliasing -fno-common \
372 -Werror-implicit-function-declaration \
373 -Wno-format-security \
374 -fno-delete-null-pointer-checks
375 KBUILD_AFLAGS_KERNEL :=
376 KBUILD_CFLAGS_KERNEL :=
377 KBUILD_AFLAGS := -D__ASSEMBLY__
378 KBUILD_AFLAGS_MODULE := -DMODULE
379 KBUILD_CFLAGS_MODULE := -DMODULE
380 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
382 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
383 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
384 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
386 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
387 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
388 export CPP AR NM STRIP OBJCOPY OBJDUMP
389 export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
390 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
392 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
393 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
394 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
395 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
396 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
397 export KBUILD_ARFLAGS
399 # When compiling out-of-tree modules, put MODVERDIR in the module
400 # tree rather than in the kernel tree. The kernel tree might
402 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
404 # Files to ignore in find ... statements
406 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
407 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
409 # ===========================================================================
410 # Rules shared between *config targets and build targets
412 # Basic helpers built in scripts/
413 PHONY += scripts_basic
415 $(Q)$(MAKE) $(build)=scripts/basic
416 $(Q)rm -f .tmp_quiet_recordmcount
418 # To avoid any implicit rule to kick in, define an empty command.
419 scripts/basic/%: scripts_basic ;
421 PHONY += outputmakefile
422 # outputmakefile generates a Makefile in the output directory, if using a
423 # separate output directory. This allows convenient use of make in the
426 ifneq ($(KBUILD_SRC),)
427 $(Q)ln -fsn $(srctree) source
428 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
429 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
432 # Support for using generic headers in asm-generic
435 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
436 obj=arch/$(SRCARCH)/include/generated/asm
438 # To make sure we do not include .config for any of the *config targets
439 # catch them early, and hand them over to scripts/kconfig/Makefile
440 # It is allowed to specify more targets when calling make, including
441 # mixing *config targets and build targets.
442 # For example 'make oldconfig all'.
443 # Detect when mixed targets is specified, and make a second invocation
444 # of make so .config is not included in this case either (for *config).
446 no-dot-config-targets := clean mrproper distclean \
447 cscope gtags TAGS tags help %docs check% coccicheck \
448 include/linux/version.h headers_% \
449 kernelversion %src-pkg
455 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
456 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
461 ifeq ($(KBUILD_EXTMOD),)
462 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
464 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
470 ifeq ($(mixed-targets),1)
471 # ===========================================================================
472 # We're called with mixed targets (*config and build targets).
473 # Handle them one by one.
476 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
479 ifeq ($(config-targets),1)
480 # ===========================================================================
481 # *config targets only - make sure prerequisites are updated, and descend
482 # in scripts/kconfig to make the *config target
484 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
485 # KBUILD_DEFCONFIG may point out an alternative default configuration
486 # used for 'make defconfig'
487 include $(srctree)/arch/$(SRCARCH)/Makefile
488 export KBUILD_DEFCONFIG KBUILD_KCONFIG
490 config: scripts_basic outputmakefile FORCE
491 $(Q)mkdir -p include/linux include/config
492 $(Q)$(MAKE) $(build)=scripts/kconfig $@
494 %config: scripts_basic outputmakefile FORCE
495 $(Q)mkdir -p include/linux include/config
496 $(Q)$(MAKE) $(build)=scripts/kconfig $@
499 # ===========================================================================
500 # Build targets only - this includes vmlinux, arch specific targets, clean
501 # targets and others. In general all targets except *config targets.
503 ifeq ($(KBUILD_EXTMOD),)
504 # Additional helpers built in scripts/
505 # Carefully list dependencies so we do not try to build scripts twice
508 scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
509 $(Q)$(MAKE) $(build)=$(@)
511 # Objects we will link into vmlinux / subdirs we need to visit
513 drivers-y := drivers/ sound/ firmware/
517 endif # KBUILD_EXTMOD
519 ifeq ($(dot-config),1)
521 -include include/config/auto.conf
523 ifeq ($(KBUILD_EXTMOD),)
524 # Read in dependencies to all Kconfig* files, make sure to run
525 # oldconfig if changes are detected.
526 -include include/config/auto.conf.cmd
528 # To avoid any implicit rule to kick in, define an empty command
529 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
531 # If .config is newer than include/config/auto.conf, someone tinkered
532 # with it and forgot to run make oldconfig.
533 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
534 # we execute the config step to be sure to catch updated Kconfig files
535 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
536 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
538 # external modules needs include/generated/autoconf.h and include/config/auto.conf
539 # but do not care if they are up-to-date. Use auto.conf to trigger the test
540 PHONY += include/config/auto.conf
542 include/config/auto.conf:
543 $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
545 echo " ERROR: Kernel configuration is invalid."; \
546 echo " include/generated/autoconf.h or $@ are missing.";\
547 echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
551 endif # KBUILD_EXTMOD
554 # Dummy target needed, because used as prerequisite
555 include/config/auto.conf: ;
556 endif # $(dot-config)
558 # The all: target is the default when no target is given on the
560 # This allow a user to issue only 'make' to build a kernel including modules
561 # Defaults to vmlinux, but the arch makefile usually adds further targets
564 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
570 include $(srctree)/arch/$(SRCARCH)/Makefile
572 ifneq ($(CONFIG_FRAME_WARN),0)
573 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
576 # Force gcc to behave correct even for buggy distributions
577 ifndef CONFIG_CC_STACKPROTECTOR
578 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
581 # This warning generated too much noise in a regular build.
582 # Use make W=1 to enable this warning (see scripts/Makefile.build)
583 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
585 ifdef CONFIG_FRAME_POINTER
586 KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
588 # Some targets (ARM with Thumb2, for example), can't be built with frame
589 # pointers. For those, we don't have FUNCTION_TRACER automatically
590 # select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
591 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
592 # -fomit-frame-pointer with FUNCTION_TRACER.
593 ifndef CONFIG_FUNCTION_TRACER
594 KBUILD_CFLAGS += -fomit-frame-pointer
598 ifdef CONFIG_DEBUG_INFO
600 KBUILD_AFLAGS += -gdwarf-2
603 ifdef CONFIG_DEBUG_INFO_REDUCED
604 KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly)
607 ifdef CONFIG_FUNCTION_TRACER
609 ifdef CONFIG_DYNAMIC_FTRACE
610 ifdef CONFIG_HAVE_C_RECORDMCOUNT
611 BUILD_C_RECORDMCOUNT := y
612 export BUILD_C_RECORDMCOUNT
617 # We trigger additional mismatches with less inlining
618 ifdef CONFIG_DEBUG_SECTION_MISMATCH
619 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
622 # arch Makefile may override CC so keep this after arch Makefile is included
623 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
624 CHECKFLAGS += $(NOSTDINC_FLAGS)
626 # warn about C99 declaration after statement
627 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
629 # disable pointer signed / unsigned warnings in gcc 4.0
630 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
632 # disable invalid "can't wrap" optimizations for signed / pointers
633 KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
635 # conserve stack if available
636 KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
638 # use the deterministic mode of AR if available
639 KBUILD_ARFLAGS := $(call ar-option,D)
641 # check for 'asm goto'
642 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
643 KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
646 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
647 # But warn user when we do so
649 $(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
651 ifneq ($(KCPPFLAGS),)
652 $(call warn-assign,CPPFLAGS)
653 KBUILD_CPPFLAGS += $(KCPPFLAGS)
656 $(call warn-assign,AFLAGS)
657 KBUILD_AFLAGS += $(KAFLAGS)
660 $(call warn-assign,CFLAGS)
661 KBUILD_CFLAGS += $(KCFLAGS)
664 # Use --build-id when available.
665 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
666 $(call cc-ldoption, -Wl$(comma)--build-id,))
667 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
668 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
670 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
671 LDFLAGS_vmlinux += $(call ld-option, -X,)
674 # Default kernel image to build when no specific target is given.
675 # KBUILD_IMAGE may be overruled on the command line or
676 # set in the environment
677 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
679 export KBUILD_IMAGE ?= vmlinux
682 # INSTALL_PATH specifies where to place the updated kernel and system map
683 # images. Default is /boot, but you can set it to other values
684 export INSTALL_PATH ?= /boot
687 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
688 # relocations required by build roots. This is not defined in the
689 # makefile but the argument can be passed to make if needed.
692 MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
696 # INSTALL_MOD_STRIP, if defined, will cause modules to be
697 # stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
698 # the default option --strip-debug will be used. Otherwise,
699 # INSTALL_MOD_STRIP value will be used as the options to the strip command.
701 ifdef INSTALL_MOD_STRIP
702 ifeq ($(INSTALL_MOD_STRIP),1)
703 mod_strip_cmd = $(STRIP) --strip-debug
705 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
706 endif # INSTALL_MOD_STRIP=1
709 endif # INSTALL_MOD_STRIP
713 ifeq ($(KBUILD_EXTMOD),)
714 core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
716 vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
717 $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
718 $(net-y) $(net-m) $(libs-y) $(libs-m)))
720 vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
722 $(core-n) $(core-) $(drivers-n) $(drivers-) \
723 $(net-n) $(net-) $(libs-n) $(libs-))))
725 init-y := $(patsubst %/, %/built-in.o, $(init-y))
726 core-y := $(patsubst %/, %/built-in.o, $(core-y))
727 drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
728 net-y := $(patsubst %/, %/built-in.o, $(net-y))
729 libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
730 libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
731 libs-y := $(libs-y1) $(libs-y2)
734 # ---------------------------------------------------------------------------
735 # vmlinux is built from the objects selected by $(vmlinux-init) and
736 # $(vmlinux-main). Most are built-in.o files from top-level directories
737 # in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
738 # Ordering when linking is important, and $(vmlinux-init) must be first.
743 # +-< $(vmlinux-init)
744 # | +--< init/version.o + more
746 # +--< $(vmlinux-main)
747 # | +--< driver/built-in.o mm/built-in.o + more
749 # +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
751 # vmlinux version (uname -v) cannot be updated during normal
752 # descending-into-subdirs phase since we do not yet know if we need to
754 # Therefore this step is delayed until just before final link of vmlinux -
755 # except in the kallsyms case where it is done just before adding the
756 # symbols to the kernel.
758 # System.map is generated to document addresses of all kernel symbols
760 vmlinux-init := $(head-y) $(init-y)
761 vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
762 vmlinux-all := $(vmlinux-init) $(vmlinux-main)
763 vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
764 export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
766 # Rule to link vmlinux - also used during CONFIG_KALLSYMS
767 # May be overridden by arch/$(ARCH)/Makefile
768 quiet_cmd_vmlinux__ ?= LD $@
769 cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
770 -T $(vmlinux-lds) $(vmlinux-init) \
771 --start-group $(vmlinux-main) --end-group \
772 $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
774 # Generate new vmlinux version
775 quiet_cmd_vmlinux_version = GEN .version
776 cmd_vmlinux_version = set -e; \
777 if [ ! -r .version ]; then \
781 mv .version .old_version; \
782 expr 0$$(cat .old_version) + 1 >.version; \
784 $(MAKE) $(build)=init
786 # Generate System.map
787 quiet_cmd_sysmap = SYSMAP
788 cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
791 # If CONFIG_KALLSYMS is set .version is already updated
792 # Generate System.map and verify that the content is consistent
793 # Use + in front of the vmlinux_version rule to silent warning with make -j2
794 # First command is ':' to allow us to use + in front of the rule
795 define rule_vmlinux__
797 $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
799 $(call cmd,vmlinux__)
800 $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
802 $(Q)$(if $($(quiet)cmd_sysmap), \
803 echo ' $($(quiet)cmd_sysmap) System.map' &&) \
804 $(cmd_sysmap) $@ System.map; \
805 if [ $$? -ne 0 ]; then \
813 ifdef CONFIG_KALLSYMS
814 # Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
815 # It's a three stage process:
816 # o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
818 # Running kallsyms on that gives us .tmp_kallsyms1.o with
819 # the right size - vmlinux version (uname -v) is updated during this step
820 # o .tmp_vmlinux2 now has a __kallsyms section of the right size,
821 # but due to the added section, some addresses have shifted.
822 # From here, we generate a correct .tmp_kallsyms2.o
823 # o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
824 # o Verify that the System.map from vmlinux matches the map from
825 # .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
826 # o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
827 # .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a
828 # temporary bypass to allow the kernel to be built while the
829 # maintainers work out what went wrong with kallsyms.
833 ifdef KALLSYMS_EXTRA_PASS
834 ifneq ($(KALLSYMS_EXTRA_PASS),0)
839 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
841 define verify_kallsyms
842 $(Q)$(if $($(quiet)cmd_sysmap), \
843 echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
844 $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
845 $(Q)cmp -s System.map .tmp_System.map || \
846 (echo Inconsistent kallsyms data; \
847 echo This is a bug - please report about it; \
848 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround; \
849 rm .tmp_kallsyms* ; /bin/false )
852 # Update vmlinux version before link
853 # Use + in front of this rule to silent warning about make -j1
854 # First command is ':' to allow us to use + in front of this rule
855 cmd_ksym_ld = $(cmd_vmlinux__)
858 +$(call cmd,vmlinux_version)
859 $(call cmd,vmlinux__)
860 $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
863 # Generate .S file with all kernel symbols
864 quiet_cmd_kallsyms = KSYM $@
865 cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
866 $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
868 .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
869 $(call if_changed_dep,as_o_S)
871 .tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
874 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
875 .tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
876 $(call if_changed_rule,ksym_ld)
878 .tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
879 $(call if_changed,vmlinux__)
881 .tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
882 $(call if_changed,vmlinux__)
884 # Needs to visit scripts/ before $(KALLSYMS) can be used.
885 $(KALLSYMS): scripts ;
887 # Generate some data for debugging strange kallsyms problems
888 debug_kallsyms: .tmp_map$(last_kallsyms)
890 .tmp_map%: .tmp_vmlinux% FORCE
891 ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
897 endif # ifdef CONFIG_KALLSYMS
899 # Do modpost on a prelinked vmlinux. The finally linked vmlinux has
900 # relevant sections renamed as per the linker script.
901 quiet_cmd_vmlinux-modpost = LD $@
902 cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \
903 $(vmlinux-init) --start-group $(vmlinux-main) --end-group \
904 $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
905 define rule_vmlinux-modpost
907 +$(call cmd,vmlinux-modpost)
908 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
909 $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
912 # vmlinux image - including updated kernel symbols
913 vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
914 ifdef CONFIG_HEADERS_CHECK
915 $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
918 $(Q)$(MAKE) $(build)=samples
920 ifdef CONFIG_BUILD_DOCSRC
921 $(Q)$(MAKE) $(build)=Documentation
923 $(call vmlinux-modpost)
924 $(call if_changed_rule,vmlinux__)
925 $(Q)rm -f .old_version
927 # build vmlinux.o first to catch section mismatch errors early
928 ifdef CONFIG_KALLSYMS
929 .tmp_vmlinux1: vmlinux.o
932 modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
933 vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
934 $(call if_changed_rule,vmlinux-modpost)
936 # The actual objects are generated when descending,
937 # make sure no implicit rule kicks in
938 $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
940 # Handle descending into subdirectories listed in $(vmlinux-dirs)
941 # Preset locale variables to speed up the build process. Limit locale
942 # tweaks to this spot to avoid wrong language settings when running
943 # make menuconfig etc.
944 # Error messages still appears in the original language
946 PHONY += $(vmlinux-dirs)
947 $(vmlinux-dirs): prepare scripts
948 $(Q)$(MAKE) $(build)=$@
950 # Store (new) KERNELRELASE string in include/config/kernel.release
951 include/config/kernel.release: include/config/auto.conf FORCE
953 $(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
956 # Things we need to do before we recursively start building the kernel
957 # or the modules are listed in "prepare".
958 # A multi level approach is used. prepareN is processed before prepareN-1.
959 # archprepare is used in arch Makefiles and when processed asm symlink,
960 # version.h and scripts_basic is processed / created.
962 # Listed in dependency order
963 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
965 # prepare3 is used to check if we are building in a separate output directory,
967 # 1) Check that make has not been executed in the kernel src $(srctree)
968 prepare3: include/config/kernel.release
969 ifneq ($(KBUILD_SRC),)
970 @$(kecho) ' Using $(srctree) as source for kernel'
971 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
972 echo " $(srctree) is not clean, please run 'make mrproper'";\
973 echo " in the '$(srctree)' directory.";\
978 # prepare2 creates a makefile if using a separate output directory
979 prepare2: prepare3 outputmakefile asm-generic
981 prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
982 include/config/auto.conf
985 archprepare: prepare1 scripts_basic
987 prepare0: archprepare FORCE
988 $(Q)$(MAKE) $(build)=.
989 $(Q)$(MAKE) $(build)=. missing-syscalls
991 # All the preparing..
994 # Generate some files
995 # ---------------------------------------------------------------------------
997 # KERNELRELEASE can change from a few different places, meaning version.h
998 # needs to be updated, so this check is forced on all builds
1001 define filechk_utsrelease.h
1002 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1003 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
1006 (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
1009 define filechk_version.h
1010 (echo \#define LINUX_VERSION_CODE $(shell \
1011 expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
1012 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
1015 include/linux/version.h: $(srctree)/Makefile FORCE
1016 $(call filechk,version.h)
1018 include/generated/utsrelease.h: include/config/kernel.release FORCE
1019 $(call filechk,utsrelease.h)
1023 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1024 $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1026 # ---------------------------------------------------------------------------
1030 @echo '*** Warning: make $@ is unnecessary now.'
1032 # ---------------------------------------------------------------------------
1034 INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
1035 export INSTALL_FW_PATH
1037 PHONY += firmware_install
1038 firmware_install: FORCE
1039 @mkdir -p $(objtree)/firmware
1040 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
1042 # ---------------------------------------------------------------------------
1045 #Default location for installed headers
1046 export INSTALL_HDR_PATH = $(objtree)/usr
1048 hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
1050 # If we do an all arch process set dst to asm-$(hdr-arch)
1051 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1054 __headers: include/linux/version.h scripts_basic asm-generic FORCE
1055 $(Q)$(MAKE) $(build)=scripts build_unifdef
1057 PHONY += headers_install_all
1058 headers_install_all:
1059 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1061 PHONY += headers_install
1062 headers_install: __headers
1063 $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
1064 $(error Headers not exportable for the $(SRCARCH) architecture))
1065 $(Q)$(MAKE) $(hdr-inst)=include
1066 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
1068 PHONY += headers_check_all
1069 headers_check_all: headers_install_all
1070 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1072 PHONY += headers_check
1073 headers_check: headers_install
1074 $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
1075 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
1077 # ---------------------------------------------------------------------------
1080 ifdef CONFIG_MODULES
1082 # By default, build modules as well
1088 # A module can be listed more than once in obj-m resulting in
1089 # duplicate lines in modules.order files. Those are removed
1090 # using awk while concatenating to the final file.
1093 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
1094 $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1095 @$(kecho) ' Building modules, stage 2.';
1096 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1097 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
1099 modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
1100 $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
1102 %/modules.builtin: include/config/auto.conf
1103 $(Q)$(MAKE) $(modbuiltin)=$*
1106 # Target to prepare building external modules
1107 PHONY += modules_prepare
1108 modules_prepare: prepare scripts
1110 # Target to install modules
1111 PHONY += modules_install
1112 modules_install: _modinst_ _modinst_post
1116 @rm -rf $(MODLIB)/kernel
1117 @rm -f $(MODLIB)/source
1118 @mkdir -p $(MODLIB)/kernel
1119 @ln -s $(srctree) $(MODLIB)/source
1120 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
1121 rm -f $(MODLIB)/build ; \
1122 ln -s $(objtree) $(MODLIB)/build ; \
1124 @cp -f $(objtree)/modules.order $(MODLIB)/
1125 @cp -f $(objtree)/modules.builtin $(MODLIB)/
1126 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1128 # This depmod is only for convenience to give the initial
1129 # boot a modules.dep even before / is mounted read-write. However the
1130 # boot script depmod is the master version.
1131 PHONY += _modinst_post
1132 _modinst_post: _modinst_
1133 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1136 else # CONFIG_MODULES
1138 # Modules not configured
1139 # ---------------------------------------------------------------------------
1141 modules modules_install: FORCE
1143 @echo "The present kernel configuration has modules disabled."
1144 @echo "Type 'make config' and enable loadable module support."
1145 @echo "Then build a kernel with module support enabled."
1149 endif # CONFIG_MODULES
1152 # Cleaning is done on three levels.
1153 # make clean Delete most generated files
1154 # Leave enough to build external modules
1155 # make mrproper Delete the current configuration, and all generated files
1156 # make distclean Remove editor backup files, patch leftover files and the like
1158 # Directories & files removed with 'make clean'
1159 CLEAN_DIRS += $(MODVERDIR)
1160 CLEAN_FILES += vmlinux System.map \
1161 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
1163 # Directories & files removed with 'make mrproper'
1164 MRPROPER_DIRS += include/config usr/include include/generated \
1165 arch/*/include/generated
1166 MRPROPER_FILES += .config .config.old .version .old_version \
1167 include/linux/version.h \
1168 Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1170 # clean - Delete most, but leave enough to build external modules
1172 clean: rm-dirs := $(CLEAN_DIRS)
1173 clean: rm-files := $(CLEAN_FILES)
1174 clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
1176 PHONY += $(clean-dirs) clean archclean
1178 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1182 # mrproper - Delete all generated files, including .config
1184 mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1185 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1186 mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
1188 PHONY += $(mrproper-dirs) mrproper archmrproper
1190 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1192 mrproper: clean archmrproper $(mrproper-dirs)
1201 @find $(srctree) $(RCS_FIND_IGNORE) \
1202 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1203 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1204 -o -name '.*.rej' -o -size 0 \
1205 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1206 -type f -print | xargs rm -f
1209 # Packaging of the kernel to various formats
1210 # ---------------------------------------------------------------------------
1211 # rpm target kept for backward compatibility
1212 package-dir := $(srctree)/scripts/package
1215 $(Q)$(MAKE) $(build)=$(package-dir) $@
1216 %pkg: include/config/kernel.release FORCE
1217 $(Q)$(MAKE) $(build)=$(package-dir) $@
1218 rpm: include/config/kernel.release FORCE
1219 $(Q)$(MAKE) $(build)=$(package-dir) $@
1222 # Brief documentation of the typical targets used
1223 # ---------------------------------------------------------------------------
1225 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1226 boards := $(notdir $(boards))
1227 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1228 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1231 @echo 'Cleaning targets:'
1232 @echo ' clean - Remove most generated files but keep the config and'
1233 @echo ' enough build support to build external modules'
1234 @echo ' mrproper - Remove all generated files + config + various backup files'
1235 @echo ' distclean - mrproper + remove editor backup and patch files'
1237 @echo 'Configuration targets:'
1238 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1240 @echo 'Other generic targets:'
1241 @echo ' all - Build all targets marked with [*]'
1242 @echo '* vmlinux - Build the bare kernel'
1243 @echo '* modules - Build all modules'
1244 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1245 @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH'
1246 @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1247 @echo ' dir/ - Build all files in dir and below'
1248 @echo ' dir/file.[oisS] - Build specified target only'
1249 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1250 @echo ' (requires a recent binutils and recent build (System.map))'
1251 @echo ' dir/file.ko - Build module including final link'
1252 @echo ' modules_prepare - Set up for building external modules'
1253 @echo ' tags/TAGS - Generate tags file for editors'
1254 @echo ' cscope - Generate cscope index'
1255 @echo ' gtags - Generate GNU GLOBAL index'
1256 @echo ' kernelrelease - Output the release version string'
1257 @echo ' kernelversion - Output the version stored in Makefile'
1258 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1259 echo ' (default: $(INSTALL_HDR_PATH))'; \
1261 @echo 'Static analysers'
1262 @echo ' checkstack - Generate a list of stack hogs'
1263 @echo ' namespacecheck - Name space analysis on compiled kernel'
1264 @echo ' versioncheck - Sanity check on version.h usage'
1265 @echo ' includecheck - Check for duplicate included header files'
1266 @echo ' export_report - List the usages of all exported symbols'
1267 @echo ' headers_check - Sanity check on exported headers'
1268 @echo ' headerdep - Detect inclusion cycles in headers'
1269 @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
1271 @echo 'Kernel packaging:'
1272 @$(MAKE) $(build)=$(package-dir) help
1274 @echo 'Documentation targets:'
1275 @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1277 @echo 'Architecture specific targets ($(SRCARCH)):'
1278 @$(if $(archhelp),$(archhelp),\
1279 echo ' No architecture specific help defined for $(SRCARCH)')
1282 $(foreach b, $(boards), \
1283 printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1285 @$(if $(board-dirs), \
1286 $(foreach b, $(board-dirs), \
1287 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1288 printf " %-16s - Show all of the above\\n" help-boards; \
1291 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1292 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1293 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1294 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1295 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1296 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1297 @echo ' 1: warnings which may be relevant and do not occur too often'
1298 @echo ' 2: warnings which occur quite often but may still be relevant'
1299 @echo ' 3: more obscure warnings, can most likely be ignored'
1300 @echo ' Multiple levels can be combined with W=12 or W=123'
1301 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1303 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1304 @echo 'For further info see the ./README file'
1307 help-board-dirs := $(addprefix help-,$(board-dirs))
1309 help-boards: $(help-board-dirs)
1311 boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
1313 $(help-board-dirs): help-%:
1314 @echo 'Architecture specific targets ($(SRCARCH) $*):'
1315 @$(if $(boards-per-dir), \
1316 $(foreach b, $(boards-per-dir), \
1317 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1321 # Documentation targets
1322 # ---------------------------------------------------------------------------
1323 %docs: scripts_basic FORCE
1324 $(Q)$(MAKE) $(build)=scripts build_docproc
1325 $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1327 else # KBUILD_EXTMOD
1330 # External module support.
1331 # When building external modules the kernel used as basis is considered
1332 # read-only, and no consistency checks are made and the make
1333 # system is not used on the basis kernel. If updates are required
1334 # in the basis kernel ordinary make commands (without M=...) must
1337 # The following are the only valid targets when building external
1339 # make M=dir clean Delete all automatically generated files
1340 # make M=dir modules Make all modules in specified dir
1341 # make M=dir Same as 'make M=dir modules'
1342 # make M=dir modules_install
1343 # Install the modules built in the module directory
1344 # Assumes install directory is already created
1346 # We are always building modules
1348 PHONY += crmodverdir
1352 PHONY += $(objtree)/Module.symvers
1353 $(objtree)/Module.symvers:
1354 @test -e $(objtree)/Module.symvers || ( \
1356 echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1357 echo " is missing; modules will have no dependencies and modversions."; \
1360 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1361 PHONY += $(module-dirs) modules
1362 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1363 $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1365 modules: $(module-dirs)
1366 @$(kecho) ' Building modules, stage 2.';
1367 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1369 PHONY += modules_install
1370 modules_install: _emodinst_ _emodinst_post
1372 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1375 $(Q)mkdir -p $(MODLIB)/$(install-dir)
1376 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1378 PHONY += _emodinst_post
1379 _emodinst_post: _emodinst_
1382 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1384 PHONY += $(clean-dirs) clean
1386 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1388 clean: rm-dirs := $(MODVERDIR)
1389 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1392 @echo ' Building external modules.'
1393 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
1395 @echo ' modules - default target, build the module(s)'
1396 @echo ' modules_install - install the module'
1397 @echo ' clean - remove generated files in module directory only'
1401 PHONY += prepare scripts
1404 endif # KBUILD_EXTMOD
1406 clean: $(clean-dirs)
1409 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1410 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1411 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1412 -o -name '*.symtypes' -o -name 'modules.order' \
1413 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1414 -o -name '*.gcno' \) -type f -print | xargs rm -f
1416 # Generate tags for editors
1417 # ---------------------------------------------------------------------------
1418 quiet_cmd_tags = GEN $@
1419 cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1421 tags TAGS cscope gtags: FORCE
1424 # Scripts to check various things for consistency
1425 # ---------------------------------------------------------------------------
1427 PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1430 find $(srctree)/* $(RCS_FIND_IGNORE) \
1431 -name '*.[hcS]' -type f -print | sort \
1432 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1435 find $(srctree)/* $(RCS_FIND_IGNORE) \
1436 -name '*.[hcS]' -type f -print | sort \
1437 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1440 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1443 $(PERL) $(srctree)/scripts/namespace.pl
1446 $(PERL) $(srctree)/scripts/export_report.pl
1448 endif #ifeq ($(config-targets),1)
1449 endif #ifeq ($(mixed-targets),1)
1451 PHONY += checkstack kernelrelease kernelversion
1453 # UML needs a little special treatment here. It wants to use the host
1454 # toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
1455 # else wants $(ARCH), including people doing cross-builds, which means
1456 # that $(SUBARCH) doesn't work here.
1458 CHECKSTACK_ARCH := $(SUBARCH)
1460 CHECKSTACK_ARCH := $(ARCH)
1463 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1464 $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1467 @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1470 @echo $(KERNELVERSION)
1473 # ---------------------------------------------------------------------------
1474 # Single targets are compatible with:
1475 # - build with mixed source and output
1476 # - build with separate output dir 'make O=...'
1477 # - external modules
1479 # target-dir => where to store outputfile
1480 # build-dir => directory in kernel source tree to use
1482 ifeq ($(KBUILD_EXTMOD),)
1483 build-dir = $(patsubst %/,%,$(dir $@))
1484 target-dir = $(dir $@)
1486 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1487 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1488 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1491 %.s: %.c prepare scripts FORCE
1492 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1493 %.i: %.c prepare scripts FORCE
1494 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1495 %.o: %.c prepare scripts FORCE
1496 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1497 %.lst: %.c prepare scripts FORCE
1498 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1499 %.s: %.S prepare scripts FORCE
1500 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1501 %.o: %.S prepare scripts FORCE
1502 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1503 %.symtypes: %.c prepare scripts FORCE
1504 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1507 /: prepare scripts FORCE
1509 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1510 $(build)=$(build-dir)
1511 %/: prepare scripts FORCE
1513 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1514 $(build)=$(build-dir)
1515 %.ko: prepare scripts FORCE
1517 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1518 $(build)=$(build-dir) $(@:.ko=.o)
1519 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1521 # FIXME Should go into a make.lib or something
1522 # ===========================================================================
1524 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1525 cmd_rmdirs = rm -rf $(rm-dirs)
1527 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1528 cmd_rmfiles = rm -f $(rm-files)
1530 # Run depmod only if we have System.map and depmod is executable
1531 quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
1532 cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1535 # Create temporary dir for module support files
1536 # clean it up only when building all modules
1537 cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1538 $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1540 a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
1541 $(KBUILD_AFLAGS_KERNEL) \
1542 $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
1543 $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
1545 quiet_cmd_as_o_S = AS $@
1546 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
1548 # read all saved command lines
1550 targets := $(wildcard $(sort $(targets)))
1551 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1553 ifneq ($(cmd_files),)
1554 $(cmd_files): ; # Do not try to update included dependency files
1555 include $(cmd_files)
1558 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1560 # $(Q)$(MAKE) $(clean)=dir
1561 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1563 endif # skip-makefile
1568 # Declare the contents of the .PHONY variable as phony. We keep that
1569 # information in a variable so we can use it in if_changed and friends.
1573 %.o: %.uu prepare scripts FORCE
1574 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)