1 #===-- Makefile.common - Common make rules for LLVM -------*- makefile -*--====
3 # This file is included by all of the LLVM makefiles. This file defines common
4 # rules to do things like compile a .cpp file or generate dependency info.
5 # These are platform dependent, so this is the file used to specify these
6 # system dependent operations.
8 # The following functionality can be set by setting incoming variables.
9 # The variable $(LEVEL) *must* be set:
11 # 1. LEVEL - The level of the current subdirectory from the top of the
12 # MagicStats view. This level should be expressed as a path, for
13 # example, ../.. for two levels deep.
15 # 2. DIRS - A list of subdirectories to be built. Fake targets are set up
16 # so that each of the targets "all", "install", and "clean" each build
17 # the subdirectories before the local target. DIRS are guaranteed to be
20 # 3. PARALLEL_DIRS - A list of subdirectories to be built, but that may be
21 # built in any order. All DIRS are built in order before PARALLEL_DIRS are
22 # built, which are then built in any order.
24 # 4. Source - If specified, this sets the source code filenames. If this
25 # is not set, it defaults to be all of the .cpp, .c, .y, and .l files
26 # in the current directory. Also, if you want to build files in addition
27 # to the local files, you can use the ExtraSource variable
29 # 5. SourceDir - If specified, this specifies a directory that the source files
30 # are in, if they are not in the current directory. This should include a
31 # trailing / character.
33 # 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree.
35 # 8. BUILD_SRC_DIR - The directory which contains the current set of Makefiles
36 # and usually the source code too (unless SourceDir is set).
38 # 9. BUILD_SRC_ROOT - The root directory of the source code being compiled.
40 # 10. BUILD_OBJ_DIR - The directory where object code should be placed.
42 # 11. BUILD_OBJ_ROOT - The root directory for where object code should be
46 # LLVM, LLVM_SRC_ROOT = BUILD_SRC_ROOT
48 #===-----------------------------------------------------------------------====
51 # Set the VPATH so that we can find source files.
52 # Also set $SouceDir for backwards compatibility
54 VPATH=$(BUILD_SRC_DIR)
55 SourceDir=$(BUILD_SRC_DIR)
57 ###########################################################################
59 # The following targets are the standard top level targets for
61 ###########################################################################
64 # if SHARED_LIBRARY is specified, the default is to build the dynamic lib
68 ifdef BYTECODE_LIBRARY
69 # if BYTECODE_LIBRARY is specified, the default is to build the bytecode lib
71 install:: bytecodelib-install
74 # Default Rule: Make sure it's also a :: rule
77 # Default for install is to at least build everything...
80 # Default rule for test. It ensures everything has a test rule
83 # Default rule for building only bytecode.
86 # Print out the directories used for building
88 @echo "Build Source Root: " $(BUILD_SRC_ROOT)
89 @echo "Build Source Dir : " $(BUILD_SRC_DIR)
90 @echo "Build Object Root: " $(BUILD_OBJ_ROOT)
91 @echo "Build Object Dir : " $(BUILD_OBJ_DIR)
92 @echo "LLVM Source Root: " $(LLVM_SRC_ROOT)
93 @echo "LLVM Object Root: " $(LLVM_OBJ_ROOT)
95 ###########################################################################
96 # Suffixes and implicit rules:
97 # Empty out the list of suffixes, generate a list that is only
98 # used by this Makefile, and cancel useless implicit rules. This
99 # will hopefully speed up compilation a little bit.
100 ###########################################################################
102 .SUFFIXES: .c .cpp .h .hpp .y .l
103 .SUFFIXES: .lo .o .a .so .bc
104 .SUFFIXES: .ps .dot .d
107 # Mark all of these targets as phony. This will hopefully speed up builds
108 # slightly since GNU Make will not try to find implicit rules for targets
109 # which are marked as Phony.
111 .PHONY: all dynamic bytecodelib bytecodelib-install
112 .PHONY: clean distclean install test bytecode prdirs
114 ###########################################################################
115 # Miscellaneous paths and commands:
116 # This section defines various configuration macros, such as where
117 # to find burg, tblgen, and libtool.
118 ###########################################################################
120 #--------------------------------------------------------------------
121 # Variables derived from configuration options...
122 #--------------------------------------------------------------------
124 #BinInstDir=/usr/local/bin
125 #LibInstDir=/usr/local/lib/xxx
126 #DocInstDir=/usr/doc/xxx
130 ifdef ENABLE_PROFILING
132 CONFIGURATION := Profile
134 ifdef ENABLE_OPTIMIZED
135 CONFIGURATION := Release
137 CONFIGURATION := Debug
142 # Enable this for profiling support with 'gprof'
143 # This automatically enables optimized builds.
145 ifdef ENABLE_PROFILING
149 ###########################################################################
151 # These variables describe various library locations:
153 # DEST* = Location of where libraries that are built will be placed.
154 # LLVM* = Location of LLVM libraries used for linking.
155 # PROJ* = Location of previously built libraries used for linking.
156 ###########################################################################
158 # Libraries that are being built
159 DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug
160 DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release
161 DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile
162 DESTLIBBYTECODE := $(BUILD_OBJ_ROOT)/lib/Bytecode
163 DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
165 # LLVM libraries used for linking
166 LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug
167 LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release
168 LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile
169 LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION)
171 # Libraries that were built that will now be used for linking
172 PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug
173 PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release
174 PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile
175 PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
177 ###########################################################################
179 # These variables describe various tool locations:
181 # DEST* = Location of where tools that are built will be placed.
182 # LLVM* = Location of LLVM tools used for building.
183 # PROJ* = Location of previously built tools used for linking.
184 ###########################################################################
186 DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
187 DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
188 DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
189 DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
191 LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug
192 LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release
193 LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile
194 LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION)
196 PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
197 PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
198 PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
199 PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
202 # Libtool is found in the current directory.
204 LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
207 # If we're not building a shared library, use the disable-shared tag with
208 # libtool. This will disable the building of objects for shared libraries and
209 # only generate static library objects.
211 # For dynamic libraries, we'll take the performance hit for now, since we
212 # almost never build them.
214 # This should speed up compilation and require no modifications to future
215 # versions of libtool.
217 ifndef SHARED_LIBRARY
218 LIBTOOL += --tag=disable-shared
229 ###########################################################################
230 # Miscellaneous paths and commands (part deux):
231 # This section defines various configuration macros, such as where
232 # to find burg, tblgen, and libtool.
233 ###########################################################################
235 #--------------------------------------------------------------------------
236 # Utilities used while building the LLVM tree, which live in the utils dir
238 BURG := $(LLVMTOOLCURRENT)/burg
239 RunBurg := $(BURG) $(BURG_OPTS)
240 TBLGEN := $(LLVMTOOLCURRENT)/tblgen
242 #--------------------------------------------------------------------------
243 # The LLVM GCC front-end in C and C++ flavors
245 LLVMGCC := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/gcc
246 LCC1 := $(LLVMGCCDIR)/libexec/gcc/$(LLVMGCCARCH)/cc1
247 LLVMGXX := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/g++
248 LCC1XX := $(LLVMGCCDIR)/libexec/gcc/$(LLVMGCCARCH)/cc1plus
250 #--------------------------------------------------------------------------
251 # Some of the compiled LLVM tools which are used for compilation of runtime
254 LLVMAS := $(LLVMTOOLCURRENT)/llvm-as
257 ###########################################################################
259 ###########################################################################
262 # Include both the project headers and the LLVM headers for compilation and
263 # dependency computation.
265 # BUILD_OBJ_DIR : Files local to the particular object directory
266 # (locallly generated header files).
267 # BUILD_SRC_DIR : Files local to the particular source directory.
268 # BUILD_SRC_ROOT/include : Files global to the project.
269 # LEVEL/include : config.h files for the project
270 # LLVM_SRC_ROOT/include : Files global to LLVM.
271 # LLVM_OBJ_ROOT/include : config.h files generated by autoconf
273 CPPFLAGS += -I$(BUILD_OBJ_DIR) -I$(BUILD_SRC_DIR) -I$(BUILD_SRC_ROOT)/include -I$(LEVEL)/include -I$(LLVM_SRC_ROOT)/include -I$(LLVM_OBJ_ROOT)/include
275 # By default, strip symbol information from executable
277 STRIP = $(PLATFORMSTRIPOPTS)
278 STRIP_WARN_MSG = "(without symbols)"
281 # Allow gnu extensions...
282 CPPFLAGS += -D_GNU_SOURCE
284 CompileWarnings := -Wall -W -Wwrite-strings -Wno-unused
285 CompileCommonOpts := $(CompileWarnings) -fshort-enums
286 CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions
289 # Compile commands with libtool.
291 Compile := $(LIBTOOL) --mode=compile $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts)
292 CompileC := $(LIBTOOL) --mode=compile $(CC) -c $(CPPFLAGS) $(CFLAGS) $(CompileCommonOpts)
294 # Compile a cpp file, don't link...
295 CompileG := $(Compile) -g -D_DEBUG
296 CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer
297 CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE)
299 # Compile a c file, don't link...
300 CompileCG := $(CompileC) -g -D_DEBUG
301 CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer
302 CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE)
304 ###########################################################################
306 ###########################################################################
309 # Link final executable
310 # (Note that we always link with the C++ compiler).
312 Link := $(LIBTOOL) --mode=link $(CXX)
314 # link both projlib and llvmlib libraries
315 LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP)
316 LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE)
317 LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE)
319 # Create one .o file from a bunch of .o files...
320 Relink := ${LIBTOOL} --mode=link $(CXX)
323 # Configure where the item being compiled should go.
326 Link += -rpath $(DESTLIBCURRENT)
330 Link += -rpath $(DESTTOOLCURRENT)
333 # Create dependency file from CPP file, send to stdout.
334 Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
335 DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS)
337 # Archive a bunch of .o files into a .a file...
340 #----------------------------------------------------------
342 # Source includes all of the cpp files, and objects are derived from the
344 # The local Makefile can list other Source files via ExtraSource = ...
347 Source := $(ExtraSource) $(wildcard $(SourceDir)/*.cpp $(SourceDir)/*.c $(SourceDir)/*.y $(SourceDir)/*.l)
353 Srcs := $(sort $(notdir $(basename $(Source))))
354 Objs := $(addsuffix .lo, $(Srcs))
355 ObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(Objs))
356 ObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(Objs))
357 ObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(Objs))
358 ObjectsBC := $(addprefix $(BUILD_OBJ_DIR)/Bytecode/,$(addsuffix .bc, $(Srcs)))
361 # The real objects underlying the libtool objects
363 RObjs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(notdir $(basename $(Source))))))
364 RObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(RObjs))
365 RObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(RObjs))
366 RObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(RObjs))
368 #---------------------------------------------------------
369 # Handle the DIRS and PARALLEL_DIRS options
370 #---------------------------------------------------------
373 all install clean test bytecode ::
374 $(VERB) for dir in ${DIRS}; do \
375 (cd $$dir; $(MAKE) $@) || exit 1; \
379 # Handle PARALLEL_DIRS
381 all :: $(addsuffix /.makeall , $(PARALLEL_DIRS))
382 install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS))
383 clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS))
384 test :: $(addsuffix /.maketest , $(PARALLEL_DIRS))
385 bytecode :: $(addsuffix /.makebytecode, $(PARALLEL_DIRS))
387 %/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode:
388 $(VERB) cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@)
391 # Handle directories that may or may not exist
393 all install clean test bytecode ::
394 $(VERB) for dir in ${OPTIONAL_DIRS}; do \
397 (cd $$dir; $(MAKE) $@) || exit 1; \
402 ###########################################################################
403 # Library Build Rules:
405 #---------------------------------------------------------
406 # Handle the LIBRARYNAME option - used when building libs...
407 #---------------------------------------------------------
409 # When libraries are built, they are allowed to optionally define the
410 # DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file
411 # from being built for the library. This .o files may then be linked to by a
412 # tool if the tool does not need (or want) the semantics a .a file provides
413 # (linking in only object files that are "needed"). If a library is never to
414 # be used in this way, it is better to define DONT_BUILD_RELINKED, and define
415 # BUILD_ARCHIVE instead.
417 # Some libraries must be built as .a files (libscalar for example) because if
418 # it's built as a .o file, then all of the constituent .o files in it will be
419 # linked into tools (for example gccas) even if they only use one of the parts
420 # of it. For this reason, sometimes it's useful to use libraries as .a files.
421 ###########################################################################
425 # Make sure there isn't any extranous whitespace on the LIBRARYNAME option
426 LIBRARYNAME := $(strip $(LIBRARYNAME))
428 LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).so
429 LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).so
430 LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).so
431 LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a
432 LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a
433 LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a
434 LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o
435 LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o
436 LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o
437 LIBNAME_BC := $(DESTLIBBYTECODE)/lib$(LIBRARYNAME).bc
439 #--------------------------------------------------------------------
441 # Modify the top level targets to build the desired libraries.
442 #--------------------------------------------------------------------
444 # dynamic target builds a shared object version of the library...
445 dynamic:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).so
446 bytecodelib:: $(LIBNAME_BC)
447 bytecodelib-install:: $(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc
449 $(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc: $(LIBNAME_BC)
450 @echo ======= Installing $(LIBRARYNAME) bytecode library =======
453 # Does the library want a .o version built?
454 ifndef DONT_BUILD_RELINKED
455 all:: $(DESTLIBCURRENT)/$(LIBRARYNAME).o
458 # Does the library want an archive version built?
460 all:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a
463 #--------------------------------------------------------------------
464 # Rules for building libraries
465 #--------------------------------------------------------------------
467 LinkBCLib := $(LLVMGCC) -shared
468 ifdef EXPORTED_SYMBOL_LIST
469 LinkBCLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST)
471 LinkBCLib += -Xlinker -disable-internalize
475 # Rule for building bytecode libraries.
476 $(LIBNAME_BC): $(ObjectsBC) $(LibSubDirs) $(DESTLIBBYTECODE)/.dir
477 @echo ======= Linking $(LIBRARYNAME) bytecode library =======
478 $(VERB) $(LinkBCLib) -o $@ $(ObjectsBC) $(LibSubDirs) $(LibLinkOpts)
480 # Rules for building dynamically linked libraries.
482 $(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
483 @echo ======= Linking $(LIBRARYNAME) dynamic release library =======
484 $(VERB) $(Link) -o $*.la $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
485 $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
487 $(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
488 @echo ======= Linking $(LIBRARYNAME) dynamic profile library =======
489 $(VERB) $(Link) -o $*.la $(ObjectsP) $(LibSubDirs) $(LibLinkOpts)
490 $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
492 $(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
493 @echo ======= Linking $(LIBRARYNAME) dynamic debug library =======
494 $(VERB) $(Link) -o $*.la $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
495 $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
498 # Rules for building static archive libraries.
500 $(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
501 @echo ======= Linking $(LIBRARYNAME) archive release library =======
503 $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static
505 $(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
506 @echo ======= Linking $(LIBRARYNAME) archive profile library =======
508 $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static
510 $(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
511 @echo ======= Linking $(LIBRARYNAME) archive debug library =======
513 $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static
517 # Rules for building .o libraries.
520 # Note that for this special case, we specify the actual object files
521 # instead of their libtool counterparts. This is because libtool
522 # doesn't want to generate a reloadable object file unless it is given
523 # .o files explicitly.
525 # Note that we're making an assumption here: If we build a .lo file,
526 # it's corresponding .o file will be placed in the same directory.
528 # I think that is safe.
530 $(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
532 $(VERB) $(Relink) -o $@ $(RObjectsO) $(LibSubDirs)
534 $(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
536 $(VERB) $(Relink) -o $@ $(RObjectsP) $(LibSubDirs)
538 $(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
540 $(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs)
544 #------------------------------------------------------------------------
545 # Create a TAGS database for emacs
546 #------------------------------------------------------------------------
550 SRCDIRS := $(wildcard $(SourceDir)/include $(SourceDir)/lib $(SourceDir)/tools)
553 $(ETAGS) -l c++ `find $(SRCDIRS) -name '*.cpp' -o -name '*.h'`
558 ${ECHO} "Cannot build $@: The program etags is not installed"
561 #------------------------------------------------------------------------
562 # Handle the TOOLNAME option - used when building tool executables...
563 #------------------------------------------------------------------------
565 # The TOOLNAME option should be used with a USEDLIBS variable that tells the
566 # libraries (and the order of the libs) that should be linked to the
567 # tool. USEDLIBS should contain a list of library names (some with .a extension)
568 # that are automatically linked in as .o files unless the .a suffix is added.
572 # TOOLEXENAME* - These compute the output filenames to generate...
573 TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME)
574 TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME)
575 TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME)
576 TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME)
578 # USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc.
579 PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
580 PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS))
581 PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
582 PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
584 LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
585 LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS))
586 LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
587 LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
589 LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G)
590 LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O)
591 LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P)
593 # USED_LIB_PATHS - Compute the path of the libraries used so that tools are
594 # rebuilt if libraries change. This has to make sure to handle .a/.so and .o
597 STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
598 USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS))
599 USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS))
600 USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS))
603 # Libtool link options:
604 # Ensure that all binaries have their symbols exported so that they can
607 LINK_OPTS := -export-dynamic $(TOOLLINKOPTS)
613 # Tell make that we need to rebuild subdirectories before we can link the tool.
614 # This affects things like LLI which has library subdirectories.
615 $(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \
616 $(addsuffix /.makeall, $(PARALLEL_DIRS))
618 all:: $(TOOLEXENAMES)
621 $(VERB) $(RM) -f $(TOOLEXENAMES)
623 $(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir
624 @echo ======= Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG) =======
625 $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS)
627 $(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir
628 @echo ======= Linking $(TOOLNAME) release executable =======
629 $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS)
631 $(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir
632 @echo ======= Linking $(TOOLNAME) profile executable =======
633 $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS)
639 #---------------------------------------------------------
640 .PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir $(BUILD_OBJ_DIR)/Bytecode/.dir
641 .PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir
643 # Create .lo files in the ObjectFiles directory from the .cpp and .c files...
644 $(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)/%.cpp $(BUILD_OBJ_DIR)/Release/.dir
646 $(VERB) $(CompileO) $< -o $@
648 $(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)/%.c $(BUILD_OBJ_DIR)/Release/.dir
650 $(VERB) $(CompileCO) $< -o $@
652 $(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)/%.cpp $(BUILD_OBJ_DIR)/Profile/.dir
654 $(VERB) $(CompileP) $< -o $@
656 $(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)/%.c $(BUILD_OBJ_DIR)/Profile/.dir
658 $(VERB) $(CompileCP) $< -o $@
660 $(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)/%.cpp $(BUILD_OBJ_DIR)/Debug/.dir
662 $(VERB) $(CompileG) $< -o $@
664 $(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)/%.c $(BUILD_OBJ_DIR)/Debug/.dir
666 $(VERB) $(CompileCG) $< -o $@
668 $(BUILD_OBJ_DIR)/Bytecode/%.bc: $(SourceDir)/%.cpp $(BUILD_OBJ_DIR)/Bytecode/.dir $(LCC1XX)
669 @echo "Compiling $< to bytecode"
670 $(VERB) $(LLVMGXX) $(CompileWarnings) $(CPPFLAGS) -c $< -o $@
672 $(BUILD_OBJ_DIR)/Bytecode/%.bc: $(SourceDir)/%.c $(BUILD_OBJ_DIR)/Bytecode/.dir $(LCC1)
673 @echo "Compiling $< to bytecode"
674 $(VERB) $(LLVMGCC) $(CompileWarnings) $(CPPFLAGS) -c $< -o $@
676 $(BUILD_OBJ_DIR)/Bytecode/%.bc: $(SourceDir)/%.ll $(BUILD_OBJ_DIR)/Bytecode/.dir $(LLVMAS)
677 @echo "Compiling $< to bytecode"
678 $(VERB) $(LLVMAS) $< -f -o $@
682 # Rules for building lex/yacc files
684 LEX_FILES = $(filter %.l, $(Source))
685 LEX_OUTPUT = $(LEX_FILES:%.l=%.cpp)
686 YACC_FILES = $(filter %.y, $(Source))
687 YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output)
688 .PRECIOUS: $(LEX_OUTPUT) $(YACC_OUTPUT)
690 # Create a .cpp source file from a flex input file... this uses sed to cut down
691 # on the warnings emited by GCC...
693 # The last line is a gross hack to work around flex aparently not being able to
694 # resize the buffer on a large token input. Currently, for uninitialized string
695 # buffers in LLVM we can generate very long tokens, so this is a hack around it.
696 # FIXME. (f.e. char Buffer[10000] )
699 @echo Flex\'ing $<...
700 $(VERB) $(FLEX) -t $< | \
701 $(SED) '/^find_rule/d' | \
702 $(SED) 's/void yyunput/inline void yyunput/' | \
703 $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
704 $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
706 $(VERB) cmp -s $@ $@.tmp > /dev/null || ${MV} -f $@.tmp $@
707 @# remove the output of flex if it didn't get moved over...
710 # Rule for building the bison parsers...
711 %.c: %.y # Cancel built-in rules for yacc
712 %.h: %.y # Cancel built-in rules for yacc
714 @echo Bison\'ing $<...
715 $(VERB) $(BISON) -v -d -p $(<F:%Parser.y=%) $*.y
716 $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || ${MV} -f $*.tab.c $*.cpp
717 $(VERB) cmp -s $*.tab.h $*.h > /dev/null || ${MV} -f $*.tab.h $*.h
718 @# If the files were not updated, don't leave them lying around...
719 @rm -f $*.tab.c $*.tab.h
721 # To create the directories...
723 $(VERB) ${MKDIR} $* > /dev/null
726 # To create postscript files from dot files...
729 ${DOT} -Tps < $< > $@
732 ${ECHO} "Cannot build $@: The program dot is not installed"
736 # This rules ensures that header files that are removed still have a rule for
737 # which they can be "generated." This allows make to ignore them and
738 # reproduce the dependency lists.
742 # 'make clean' nukes the tree
744 $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release
745 $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend
746 $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Bytecode
747 $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc
748 $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT)
750 ###########################################################################
752 # Define variables and rules that generate header file dependencies
753 # from C/C++ source files.
754 ###########################################################################
756 ifndef DISABLE_AUTO_DEPENDENCIES
758 # If dependencies were generated for the file that included this file,
759 # include the dependencies now...
761 SourceBaseNames := $(basename $(notdir $(filter-out $(SourceDir)/$(CONFIGURATION)/%, $(Source))))
762 SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d)
764 # Create dependencies for the *.cpp files...
765 $(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)/%.cpp $(BUILD_OBJ_DIR)/Depend/.dir
766 $(VERB) $(Depend) $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
768 # Create dependencies for the *.c files...
769 $(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)/%.c $(BUILD_OBJ_DIR)/Depend/.dir
770 $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
773 # Include dependencies generated from C/C++ source files, but not if we
774 # are cleaning (this example taken from the GNU Make Manual).
776 ifneq ($(MAKECMDGOALS),clean)
777 ifneq ($(MAKECMDGOALS),distclean)
778 -include /dev/null $(SourceDepend)
782 endif # ifndef DISABLE_AUTO_DEPENDENCIES