2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "am33xx.dtsi"
13 model = "TI AM335x BeagleBone";
14 compatible = "ti,am335x-bone", "ti,am33xx";
18 cpu0-supply = <&dcdc2_reg>;
23 device_type = "memory";
24 reg = <0x80000000 0x10000000>; /* 256 MB */
27 am33xx_pinmux: pinmux@44e10800 {
28 pinctrl-names = "default";
29 pinctrl-0 = <&clkout2_pin>;
31 user_leds_s0: user_leds_s0 {
32 pinctrl-single,pins = <
33 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
34 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
35 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
36 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
40 i2c0_pins: pinmux_i2c0_pins {
41 pinctrl-single,pins = <
42 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
43 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
47 uart0_pins: pinmux_uart0_pins {
48 pinctrl-single,pins = <
49 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
50 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
54 clkout2_pin: pinmux_clkout2_pin {
55 pinctrl-single,pins = <
56 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
60 cpsw_default: cpsw_default {
61 pinctrl-single,pins = <
63 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
64 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
65 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
66 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
67 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
68 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
69 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
70 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
71 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
72 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
73 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
74 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
75 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
79 cpsw_sleep: cpsw_sleep {
80 pinctrl-single,pins = <
81 /* Slave 1 reset value */
82 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
83 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
84 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
85 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
86 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
87 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
88 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
89 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
90 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
91 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
92 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
93 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
94 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
98 davinci_mdio_default: davinci_mdio_default {
99 pinctrl-single,pins = <
101 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
102 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
106 davinci_mdio_sleep: davinci_mdio_sleep {
107 pinctrl-single,pins = <
108 /* MDIO reset value */
109 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
110 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
116 uart0: serial@44e09000 {
117 pinctrl-names = "default";
118 pinctrl-0 = <&uart0_pins>;
147 dma-controller@07402000 {
153 pinctrl-names = "default";
154 pinctrl-0 = <&i2c0_pins>;
157 clock-frequency = <400000>;
167 pinctrl-names = "default";
168 pinctrl-0 = <&user_leds_s0>;
170 compatible = "gpio-leds";
173 label = "beaglebone:green:heartbeat";
174 gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
175 linux,default-trigger = "heartbeat";
176 default-state = "off";
180 label = "beaglebone:green:mmc0";
181 gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
182 linux,default-trigger = "mmc0";
183 default-state = "off";
187 label = "beaglebone:green:usr2";
188 gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
189 default-state = "off";
193 label = "beaglebone:green:usr3";
194 gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
195 default-state = "off";
200 /include/ "tps65217.dtsi"
204 dcdc1_reg: regulator@0 {
208 dcdc2_reg: regulator@1 {
209 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
210 regulator-name = "vdd_mpu";
211 regulator-min-microvolt = <925000>;
212 regulator-max-microvolt = <1325000>;
217 dcdc3_reg: regulator@2 {
218 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
219 regulator-name = "vdd_core";
220 regulator-min-microvolt = <925000>;
221 regulator-max-microvolt = <1150000>;
226 ldo1_reg: regulator@3 {
230 ldo2_reg: regulator@4 {
234 ldo3_reg: regulator@5 {
238 ldo4_reg: regulator@6 {
245 phy_id = <&davinci_mdio>, <0>;
250 phy_id = <&davinci_mdio>, <1>;
255 pinctrl-names = "default", "sleep";
256 pinctrl-0 = <&cpsw_default>;
257 pinctrl-1 = <&cpsw_sleep>;
262 pinctrl-names = "default", "sleep";
263 pinctrl-0 = <&davinci_mdio_default>;
264 pinctrl-1 = <&davinci_mdio_sleep>;