2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
13 #include "am4372.dtsi"
14 #include <dt-bindings/pinctrl/am43xx.h>
15 #include <dt-bindings/pwm/pwm.h>
16 #include <dt-bindings/gpio/gpio.h>
19 model = "TI AM437x GP EVM";
20 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
26 vmmcsd_fixed: fixedregulator-sd {
27 compatible = "regulator-fixed";
28 regulator-name = "vmmcsd_fixed";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
34 vtt_fixed: fixedregulator-vtt {
35 compatible = "regulator-fixed";
36 regulator-name = "vtt_fixed";
37 regulator-min-microvolt = <1500000>;
38 regulator-max-microvolt = <1500000>;
42 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
46 compatible = "pwm-backlight";
47 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
48 brightness-levels = <0 51 53 56 62 75 101 152 255>;
49 default-brightness-level = <8>;
52 matrix_keypad: matrix_keypad@0 {
53 compatible = "gpio-matrix-keypad";
54 debounce-delay-ms = <5>;
55 col-scan-delay-us = <2>;
57 row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
58 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
59 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
61 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
62 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
64 linux,keymap = <0x00000201 /* P1 */
67 0x0101006a /* RIGHT */
69 0x0201006c>; /* DOWN */
73 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
76 pinctrl-names = "default";
77 pinctrl-0 = <&lcd_pins>;
80 * SelLCDorHDMI, LOW to select HDMI. This is not really the
81 * panel's enable GPIO, but we don't have HDMI driver support nor
82 * support to switch between two displays, so using this gpio as
83 * panel's enable should be safe.
85 enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
88 clock-frequency = <33000000>;
100 pixelclk-active = <1>;
105 remote-endpoint = <&dpi_out>;
112 i2c0_pins: i2c0_pins {
113 pinctrl-single,pins = <
114 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
115 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
119 i2c1_pins: i2c1_pins {
120 pinctrl-single,pins = <
121 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
122 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
126 mmc1_pins: pinmux_mmc1_pins {
127 pinctrl-single,pins = <
128 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
132 ecap0_pins: backlight_pins {
133 pinctrl-single,pins = <
134 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
138 pixcir_ts_pins: pixcir_ts_pins {
139 pinctrl-single,pins = <
140 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
144 cpsw_default: cpsw_default {
145 pinctrl-single,pins = <
147 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
148 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
149 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
150 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
151 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
152 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
153 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
154 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
155 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
156 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
157 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
158 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
162 cpsw_sleep: cpsw_sleep {
163 pinctrl-single,pins = <
164 /* Slave 1 reset value */
165 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
166 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
167 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
168 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
169 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
170 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
171 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
172 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
173 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
174 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
175 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
176 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
180 davinci_mdio_default: davinci_mdio_default {
181 pinctrl-single,pins = <
183 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
184 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
188 davinci_mdio_sleep: davinci_mdio_sleep {
189 pinctrl-single,pins = <
190 /* MDIO reset value */
191 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
192 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
196 nand_flash_x8: nand_flash_x8 {
197 pinctrl-single,pins = <
198 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */
199 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
200 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
201 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
202 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
203 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
204 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
205 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
206 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
207 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
208 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
209 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
210 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
211 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
212 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
213 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
218 pinctrl-single,pins = <
219 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
220 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
221 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
222 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
223 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
224 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
225 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
226 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
227 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
228 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
229 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
230 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
231 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
232 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
233 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
234 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
235 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
236 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
237 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
238 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
239 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
240 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
241 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
242 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
243 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
244 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
245 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
246 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
252 pinctrl-single,pins = <
253 /* GPIO 5_8 to select LCD / HDMI */
254 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
258 dcan0_default: dcan0_default_pins {
259 pinctrl-single,pins = <
260 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
261 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
265 dcan1_default: dcan1_default_pins {
266 pinctrl-single,pins = <
267 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
268 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
275 pinctrl-names = "default";
276 pinctrl-0 = <&i2c0_pins>;
277 clock-frequency = <100000>;
279 tps65218: tps65218@24 {
281 compatible = "ti,tps65218";
282 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
283 interrupt-parent = <&gic>;
284 interrupt-controller;
285 #interrupt-cells = <2>;
287 dcdc1: regulator-dcdc1 {
288 compatible = "ti,tps65218-dcdc1";
289 regulator-name = "vdd_core";
290 regulator-min-microvolt = <912000>;
291 regulator-max-microvolt = <1144000>;
296 dcdc2: regulator-dcdc2 {
297 compatible = "ti,tps65218-dcdc2";
298 regulator-name = "vdd_mpu";
299 regulator-min-microvolt = <912000>;
300 regulator-max-microvolt = <1378000>;
305 dcdc3: regulator-dcdc3 {
306 compatible = "ti,tps65218-dcdc3";
307 regulator-name = "vdcdc3";
308 regulator-min-microvolt = <1500000>;
309 regulator-max-microvolt = <1500000>;
313 dcdc5: regulator-dcdc5 {
314 compatible = "ti,tps65218-dcdc5";
315 regulator-name = "v1_0bat";
316 regulator-min-microvolt = <1000000>;
317 regulator-max-microvolt = <1000000>;
320 dcdc6: regulator-dcdc6 {
321 compatible = "ti,tps65218-dcdc6";
322 regulator-name = "v1_8bat";
323 regulator-min-microvolt = <1800000>;
324 regulator-max-microvolt = <1800000>;
327 ldo1: regulator-ldo1 {
328 compatible = "ti,tps65218-ldo1";
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <1800000>;
339 pinctrl-names = "default";
340 pinctrl-0 = <&i2c1_pins>;
342 compatible = "pixcir,pixcir_tangoc";
343 pinctrl-names = "default";
344 pinctrl-0 = <&pixcir_ts_pins>;
346 interrupt-parent = <&gpio3>;
349 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
351 touchscreen-size-x = <1024>;
352 touchscreen-size-y = <600>;
364 ti,adc-channels = <0 1 2 3 4 5 6 7>;
370 pinctrl-names = "default";
371 pinctrl-0 = <&ecap0_pins>;
393 vmmc-supply = <&vmmcsd_fixed>;
395 pinctrl-names = "default";
396 pinctrl-0 = <&mmc1_pins>;
397 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
405 dr_mode = "peripheral";
420 pinctrl-names = "default", "sleep";
421 pinctrl-0 = <&cpsw_default>;
422 pinctrl-1 = <&cpsw_sleep>;
427 pinctrl-names = "default", "sleep";
428 pinctrl-0 = <&davinci_mdio_default>;
429 pinctrl-1 = <&davinci_mdio_sleep>;
434 phy_id = <&davinci_mdio>, <0>;
444 pinctrl-names = "default";
445 pinctrl-0 = <&nand_flash_x8>;
446 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
448 reg = <0 0 4>; /* device IO registers */
449 ti,nand-ecc-opt = "bch16";
451 nand-bus-width = <8>;
452 gpmc,device-width = <1>;
453 gpmc,sync-clk-ps = <0>;
455 gpmc,cs-rd-off-ns = <40>;
456 gpmc,cs-wr-off-ns = <40>;
457 gpmc,adv-on-ns = <0>;
458 gpmc,adv-rd-off-ns = <25>;
459 gpmc,adv-wr-off-ns = <25>;
461 gpmc,we-off-ns = <20>;
463 gpmc,oe-off-ns = <30>;
464 gpmc,access-ns = <30>;
465 gpmc,rd-cycle-ns = <40>;
466 gpmc,wr-cycle-ns = <40>;
468 gpmc,bus-turnaround-ns = <0>;
469 gpmc,cycle2cycle-delay-ns = <0>;
470 gpmc,clk-activation-ns = <0>;
471 gpmc,wait-monitoring-ns = <0>;
472 gpmc,wr-access-ns = <40>;
473 gpmc,wr-data-mux-bus-ns = <0>;
474 /* MTD partition table */
475 /* All SPL-* partitions are sized to minimal length
476 * which can be independently programmable. For
477 * NAND flash this is equal to size of erase-block */
478 #address-cells = <1>;
482 reg = <0x00000000 0x00040000>;
485 label = "NAND.SPL.backup1";
486 reg = <0x00040000 0x00040000>;
489 label = "NAND.SPL.backup2";
490 reg = <0x00080000 0x00040000>;
493 label = "NAND.SPL.backup3";
494 reg = <0x000c0000 0x00040000>;
497 label = "NAND.u-boot-spl-os";
498 reg = <0x00100000 0x00080000>;
501 label = "NAND.u-boot";
502 reg = <0x00180000 0x00100000>;
505 label = "NAND.u-boot-env";
506 reg = <0x00280000 0x00040000>;
509 label = "NAND.u-boot-env.backup1";
510 reg = <0x002c0000 0x00040000>;
513 label = "NAND.kernel";
514 reg = <0x00300000 0x00700000>;
517 label = "NAND.file-system";
518 reg = <0x00a00000 0x1f600000>;
526 pinctrl-names = "default";
527 pinctrl-0 = <&dss_pins>;
530 dpi_out: endpoint@0 {
531 remote-endpoint = <&lcd_in>;
538 pinctrl-names = "default";
539 pinctrl-0 = <&dcan0_default>;
544 pinctrl-names = "default";
545 pinctrl-0 = <&dcan1_default>;