2 * Device Tree file for Globalscale Mirabox
4 * Gregory CLEMENT <gregory.clement@free-electrons.com>
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
12 #include <dt-bindings/gpio/gpio.h>
13 #include "armada-370.dtsi"
16 model = "Globalscale Mirabox";
17 compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
20 bootargs = "console=ttyS0,115200 earlyprintk";
24 device_type = "memory";
25 reg = <0x00000000 0x20000000>; /* 512 MB */
29 ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
30 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
35 /* Internal mini-PCIe connector */
41 /* Connected on the PCB to a USB 3.0 XHCI controller */
53 clock-frequency = <600000000>;
58 compatible = "gpio-leds";
59 pinctrl-names = "default";
60 pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
63 label = "mirabox:green:pwr";
64 gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
65 default-state = "keep";
69 label = "mirabox:blue:stat";
70 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
71 default-state = "off";
75 label = "mirabox:green:stat";
76 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
77 default-state = "off";
82 pinctrl-0 = <&mdio_pins>;
83 pinctrl-names = "default";
84 phy0: ethernet-phy@0 {
88 phy1: ethernet-phy@1 {
93 pinctrl-0 = <&ge0_rgmii_pins>;
94 pinctrl-names = "default";
97 phy-mode = "rgmii-id";
100 pinctrl-0 = <&ge1_rgmii_pins>;
101 pinctrl-names = "default";
104 phy-mode = "rgmii-id";
108 pinctrl-0 = <&sdio_pins3>;
109 pinctrl-names = "default";
112 * No CD or WP GPIOs: SDIO interface used for
113 * Wifi/Bluetooth chip
128 clock-frequency = <100000>;
129 pca9505: pca9505@25 {
130 compatible = "nxp,pca9505";
140 marvell,nand-keep-config;
141 marvell,nand-enable-arbiter;
150 reg = <0x400000 0x400000>;
153 label = "Filesystem";
154 reg = <0x800000 0x3f800000>;
162 pwr_led_pin: pwr-led-pin {
163 marvell,pins = "mpp63";
164 marvell,function = "gpo";
167 stat_led_pins: stat-led-pins {
168 marvell,pins = "mpp64", "mpp65";
169 marvell,function = "gpio";