2 * Device Tree Include file for Marvell Armada 385 SoC.
4 * Copyright (C) 2014 Marvell
6 * Lior Amsalem <alior@marvell.com>
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 * This file is licensed under the terms of the GNU General Public
11 * License version 2. This program is licensed "as is" without any
12 * warranty of any kind, whether express or implied.
15 #include "armada-38x.dtsi"
18 model = "Marvell Armada 385 family SoC";
19 compatible = "marvell,armada385", "marvell,armada380";
24 enable-method = "marvell,armada-380-smp";
28 compatible = "arm,cortex-a9";
33 compatible = "arm,cortex-a9";
41 compatible = "marvell,mv88f6820-pinctrl";
46 compatible = "marvell,armada-370-pcie";
54 bus-range = <0x00 0xff>;
57 <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
58 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
59 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
60 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
61 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
62 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
63 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
64 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
65 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
66 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */
67 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
68 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>;
71 * This port can be either x4 or x1. When
72 * configured in x4 by the bootloader, then
73 * pcie@4,0 is not available.
77 assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
78 reg = <0x0800 0 0 0 0>;
81 #interrupt-cells = <1>;
82 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
83 0x81000000 0 0 0x81000000 0x1 0 1 0>;
84 interrupt-map-mask = <0 0 0 0>;
85 interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
86 marvell,pcie-port = <0>;
87 marvell,pcie-lane = <0>;
88 clocks = <&gateclk 8>;
95 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
96 reg = <0x1000 0 0 0 0>;
99 #interrupt-cells = <1>;
100 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
101 0x81000000 0 0 0x81000000 0x2 0 1 0>;
102 interrupt-map-mask = <0 0 0 0>;
103 interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
104 marvell,pcie-port = <1>;
105 marvell,pcie-lane = <0>;
106 clocks = <&gateclk 5>;
113 assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
114 reg = <0x1800 0 0 0 0>;
115 #address-cells = <3>;
117 #interrupt-cells = <1>;
118 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
119 0x81000000 0 0 0x81000000 0x3 0 1 0>;
120 interrupt-map-mask = <0 0 0 0>;
121 interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
122 marvell,pcie-port = <2>;
123 marvell,pcie-lane = <0>;
124 clocks = <&gateclk 6>;
129 * x1 port only available when pcie@1,0 is
130 * configured as a x1 port
134 assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
135 reg = <0x2000 0 0 0 0>;
136 #address-cells = <3>;
138 #interrupt-cells = <1>;
139 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
140 0x81000000 0 0 0x81000000 0x4 0 1 0>;
141 interrupt-map-mask = <0 0 0 0>;
142 interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
143 marvell,pcie-port = <3>;
144 marvell,pcie-lane = <0>;
145 clocks = <&gateclk 7>;