2 * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6 * Licensed under GPLv2 only.
9 /include/ "skeleton.dtsi"
12 model = "Atmel AT91SAM9263 family SoC";
13 compatible = "atmel,at91sam9263";
14 interrupt-parent = <&aic>;
33 compatible = "arm,arm926ejs";
38 reg = <0x20000000 0x08000000>;
42 compatible = "simple-bus";
48 compatible = "simple-bus";
53 aic: interrupt-controller@fffff000 {
54 #interrupt-cells = <3>;
55 compatible = "atmel,at91rm9200-aic";
57 reg = <0xfffff000 0x200>;
58 atmel,external-irqs = <30 31>;
62 compatible = "atmel,at91rm9200-pmc";
63 reg = <0xfffffc00 0x100>;
67 compatible = "atmel,at91sam9260-sdramc";
68 reg = <0xffffe200 0x200
73 compatible = "atmel,at91sam9260-pit";
74 reg = <0xfffffd30 0xf>;
78 tcb0: timer@fff7c000 {
79 compatible = "atmel,at91rm9200-tcb";
80 reg = <0xfff7c000 0x100>;
81 interrupts = <19 4 0>;
85 compatible = "atmel,at91sam9260-rstc";
86 reg = <0xfffffd00 0x10>;
90 compatible = "atmel,at91sam9260-shdwc";
91 reg = <0xfffffd10 0x10>;
97 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
98 ranges = <0xfffff200 0xfffff200 0xa00>;
102 0xfffffffb 0xffffe07f /* pioA */
103 0x0007ffff 0x39072fff /* pioB */
104 0xffffffff 0x3ffffff8 /* pioC */
105 0xfffffbff 0xffffffff /* pioD */
106 0xffe00fff 0xfbfcff00 /* pioE */
109 /* shared pinctrl settings */
111 pinctrl_dbgu: dbgu-0 {
113 <2 30 0x1 0x0 /* PC30 periph A */
114 2 31 0x1 0x1>; /* PC31 periph with pullup */
119 pinctrl_usart0: usart0-0 {
121 <0 26 0x1 0x1 /* PA26 periph A with pullup */
122 0 27 0x1 0x0>; /* PA27 periph A */
125 pinctrl_usart0_rts: usart0_rts-0 {
127 <0 28 0x1 0x0>; /* PA28 periph A */
130 pinctrl_usart0_cts: usart0_cts-0 {
132 <0 29 0x1 0x0>; /* PA29 periph A */
137 pinctrl_usart1: usart1-0 {
139 <3 0 0x1 0x1 /* PD0 periph A with pullup */
140 3 1 0x1 0x0>; /* PD1 periph A */
143 pinctrl_usart1_rts: usart1_rts-0 {
145 <3 7 0x2 0x0>; /* PD7 periph B */
148 pinctrl_usart1_cts: usart1_cts-0 {
150 <3 8 0x2 0x0>; /* PD8 periph B */
155 pinctrl_usart2: usart2-0 {
157 <3 2 0x1 0x1 /* PD2 periph A with pullup */
158 3 3 0x1 0x0>; /* PD3 periph A */
161 pinctrl_usart2_rts: usart2_rts-0 {
163 <3 5 0x2 0x0>; /* PD5 periph B */
166 pinctrl_usart2_cts: usart2_cts-0 {
168 <4 6 0x2 0x0>; /* PD6 periph B */
173 pinctrl_nand: nand-0 {
175 <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/
176 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */
181 pinctrl_macb_rmii: macb_rmii-0 {
183 <2 25 0x2 0x0 /* PC25 periph B */
184 4 21 0x1 0x0 /* PE21 periph A */
185 4 23 0x1 0x0 /* PE23 periph A */
186 4 24 0x1 0x0 /* PE24 periph A */
187 4 25 0x1 0x0 /* PE25 periph A */
188 4 26 0x1 0x0 /* PE26 periph A */
189 4 27 0x1 0x0 /* PE27 periph A */
190 4 28 0x1 0x0 /* PE28 periph A */
191 4 29 0x1 0x0 /* PE29 periph A */
192 4 30 0x1 0x0>; /* PE30 periph A */
195 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
197 <2 20 0x2 0x0 /* PC20 periph B */
198 2 21 0x2 0x0 /* PC21 periph B */
199 2 22 0x2 0x0 /* PC22 periph B */
200 2 23 0x2 0x0 /* PC23 periph B */
201 2 24 0x2 0x0 /* PC24 periph B */
202 2 25 0x2 0x0 /* PC25 periph B */
203 2 27 0x2 0x0 /* PC27 periph B */
204 4 22 0x2 0x0>; /* PE22 periph B */
209 pinctrl_mmc0_clk: mmc0_clk-0 {
211 <0 12 0x1 0x0>; /* PA12 periph A */
214 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
216 <0 1 0x1 0x1 /* PA1 periph A with pullup */
217 0 0 0x1 0x1>; /* PA0 periph A with pullup */
220 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
222 <0 3 0x1 0x1 /* PA3 periph A with pullup */
223 0 4 0x1 0x1 /* PA4 periph A with pullup */
224 0 5 0x1 0x1>; /* PA5 periph A with pullup */
227 pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
229 <0 16 0x1 0x1 /* PA16 periph A with pullup */
230 0 17 0x1 0x1>; /* PA17 periph A with pullup */
233 pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
235 <0 18 0x1 0x1 /* PA18 periph A with pullup */
236 0 19 0x1 0x1 /* PA19 periph A with pullup */
237 0 20 0x1 0x1>; /* PA20 periph A with pullup */
242 pinctrl_mmc1_clk: mmc1_clk-0 {
244 <0 6 0x1 0x0>; /* PA6 periph A */
247 pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
249 <0 7 0x1 0x1 /* PA7 periph A with pullup */
250 0 8 0x1 0x1>; /* PA8 periph A with pullup */
253 pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
255 <0 9 0x1 0x1 /* PA9 periph A with pullup */
256 0 10 0x1 0x1 /* PA10 periph A with pullup */
257 0 11 0x1 0x1>; /* PA11 periph A with pullup */
260 pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
262 <0 21 0x1 0x1 /* PA21 periph A with pullup */
263 0 22 0x1 0x1>; /* PA22 periph A with pullup */
266 pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
268 <0 23 0x1 0x1 /* PA23 periph A with pullup */
269 0 24 0x1 0x1 /* PA24 periph A with pullup */
270 0 25 0x1 0x1>; /* PA25 periph A with pullup */
274 pioA: gpio@fffff200 {
275 compatible = "atmel,at91rm9200-gpio";
276 reg = <0xfffff200 0x200>;
277 interrupts = <2 4 1>;
280 interrupt-controller;
281 #interrupt-cells = <2>;
284 pioB: gpio@fffff400 {
285 compatible = "atmel,at91rm9200-gpio";
286 reg = <0xfffff400 0x200>;
287 interrupts = <3 4 1>;
290 interrupt-controller;
291 #interrupt-cells = <2>;
294 pioC: gpio@fffff600 {
295 compatible = "atmel,at91rm9200-gpio";
296 reg = <0xfffff600 0x200>;
297 interrupts = <4 4 1>;
300 interrupt-controller;
301 #interrupt-cells = <2>;
304 pioD: gpio@fffff800 {
305 compatible = "atmel,at91rm9200-gpio";
306 reg = <0xfffff800 0x200>;
307 interrupts = <4 4 1>;
310 interrupt-controller;
311 #interrupt-cells = <2>;
314 pioE: gpio@fffffa00 {
315 compatible = "atmel,at91rm9200-gpio";
316 reg = <0xfffffa00 0x200>;
317 interrupts = <4 4 1>;
320 interrupt-controller;
321 #interrupt-cells = <2>;
325 dbgu: serial@ffffee00 {
326 compatible = "atmel,at91sam9260-usart";
327 reg = <0xffffee00 0x200>;
328 interrupts = <1 4 7>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_dbgu>;
334 usart0: serial@fff8c000 {
335 compatible = "atmel,at91sam9260-usart";
336 reg = <0xfff8c000 0x200>;
337 interrupts = <7 4 5>;
340 pinctrl-names = "default";
341 pinctrl-0 = <&pinctrl_usart0>;
345 usart1: serial@fff90000 {
346 compatible = "atmel,at91sam9260-usart";
347 reg = <0xfff90000 0x200>;
348 interrupts = <8 4 5>;
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_usart1>;
356 usart2: serial@fff94000 {
357 compatible = "atmel,at91sam9260-usart";
358 reg = <0xfff94000 0x200>;
359 interrupts = <9 4 5>;
362 pinctrl-names = "default";
363 pinctrl-0 = <&pinctrl_usart2>;
368 compatible = "atmel,at91rm9200-ssc";
369 reg = <0xfff98000 0x4000>;
370 interrupts = <16 4 5>;
375 compatible = "atmel,at91rm9200-ssc";
376 reg = <0xfff9c000 0x4000>;
377 interrupts = <17 4 5>;
381 macb0: ethernet@fffbc000 {
382 compatible = "cdns,at32ap7000-macb", "cdns,macb";
383 reg = <0xfffbc000 0x100>;
384 interrupts = <21 4 3>;
385 pinctrl-names = "default";
386 pinctrl-0 = <&pinctrl_macb_rmii>;
390 usb1: gadget@fff78000 {
391 compatible = "atmel,at91rm9200-udc";
392 reg = <0xfff78000 0x4000>;
393 interrupts = <24 4 2>;
398 compatible = "atmel,at91sam9263-i2c";
399 reg = <0xfff88000 0x100>;
400 interrupts = <13 4 6>;
401 #address-cells = <1>;
407 compatible = "atmel,hsmci";
408 reg = <0xfff80000 0x600>;
409 interrupts = <10 4 0>;
410 #address-cells = <1>;
416 compatible = "atmel,hsmci";
417 reg = <0xfff84000 0x600>;
418 interrupts = <11 4 0>;
419 #address-cells = <1>;
425 compatible = "atmel,at91sam9260-wdt";
426 reg = <0xfffffd40 0x10>;
431 nand0: nand@40000000 {
432 compatible = "atmel,at91rm9200-nand";
433 #address-cells = <1>;
435 reg = <0x40000000 0x10000000
438 atmel,nand-addr-offset = <21>;
439 atmel,nand-cmd-offset = <22>;
440 pinctrl-names = "default";
441 pinctrl-0 = <&pinctrl_nand>;
449 usb0: ohci@00a00000 {
450 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
451 reg = <0x00a00000 0x100000>;
452 interrupts = <29 4 2>;
458 compatible = "i2c-gpio";
459 gpios = <&pioB 4 0 /* sda */
462 i2c-gpio,sda-open-drain;
463 i2c-gpio,scl-open-drain;
464 i2c-gpio,delay-us = <2>; /* ~100 kHz */
465 #address-cells = <1>;