2 * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
3 * applies to AT91SAM9G45, AT91SAM9M10,
4 * AT91SAM9G46, AT91SAM9M11 SoC
6 * Copyright (C) 2011 Atmel,
7 * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
9 * Licensed under GPLv2 or later.
12 /include/ "skeleton.dtsi"
15 model = "Atmel AT91SAM9G45 family SoC";
16 compatible = "atmel,at91sam9g45";
17 interrupt-parent = <&aic>;
35 compatible = "arm,arm926ejs";
40 reg = <0x70000000 0x10000000>;
44 compatible = "simple-bus";
50 compatible = "simple-bus";
55 aic: interrupt-controller@fffff000 {
56 #interrupt-cells = <2>;
57 compatible = "atmel,at91rm9200-aic";
60 reg = <0xfffff000 0x200>;
64 compatible = "atmel,at91rm9200-pmc";
65 reg = <0xfffffc00 0x100>;
69 compatible = "atmel,at91sam9260-pit";
70 reg = <0xfffffd30 0xf>;
75 tcb0: timer@fff7c000 {
76 compatible = "atmel,at91rm9200-tcb";
77 reg = <0xfff7c000 0x100>;
81 tcb1: timer@fffd4000 {
82 compatible = "atmel,at91rm9200-tcb";
83 reg = <0xfffd4000 0x100>;
87 dma: dma-controller@ffffec00 {
88 compatible = "atmel,at91sam9g45-dma";
89 reg = <0xffffec00 0x200>;
94 compatible = "atmel,at91rm9200-gpio";
95 reg = <0xfffff200 0x100>;
102 pioB: gpio@fffff400 {
103 compatible = "atmel,at91rm9200-gpio";
104 reg = <0xfffff400 0x100>;
108 interrupt-controller;
111 pioC: gpio@fffff600 {
112 compatible = "atmel,at91rm9200-gpio";
113 reg = <0xfffff600 0x100>;
117 interrupt-controller;
120 pioD: gpio@fffff800 {
121 compatible = "atmel,at91rm9200-gpio";
122 reg = <0xfffff800 0x100>;
126 interrupt-controller;
129 pioE: gpio@fffffa00 {
130 compatible = "atmel,at91rm9200-gpio";
131 reg = <0xfffffa00 0x100>;
135 interrupt-controller;
138 dbgu: serial@ffffee00 {
139 compatible = "atmel,at91sam9260-usart";
140 reg = <0xffffee00 0x200>;
145 usart0: serial@fff8c000 {
146 compatible = "atmel,at91sam9260-usart";
147 reg = <0xfff8c000 0x200>;
154 usart1: serial@fff90000 {
155 compatible = "atmel,at91sam9260-usart";
156 reg = <0xfff90000 0x200>;
163 usart2: serial@fff94000 {
164 compatible = "atmel,at91sam9260-usart";
165 reg = <0xfff94000 0x200>;
172 usart3: serial@fff98000 {
173 compatible = "atmel,at91sam9260-usart";
174 reg = <0xfff98000 0x200>;
181 macb0: ethernet@fffbc000 {
182 compatible = "cdns,at32ap7000-macb", "cdns,macb";
183 reg = <0xfffbc000 0x100>;
189 nand0: nand@40000000 {
190 compatible = "atmel,at91rm9200-nand";
191 #address-cells = <1>;
193 reg = <0x40000000 0x10000000
196 atmel,nand-addr-offset = <21>;
197 atmel,nand-cmd-offset = <22>;
207 compatible = "i2c-gpio";
208 gpios = <&pioA 20 0 /* sda */
211 i2c-gpio,sda-open-drain;
212 i2c-gpio,scl-open-drain;
213 i2c-gpio,delay-us = <5>; /* ~100 kHz */
214 #address-cells = <1>;