2 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
3 * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
4 * AT91SAM9X25, AT91SAM9X35 SoC
6 * Copyright (C) 2012 Atmel,
7 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
9 * Licensed under GPLv2 or later.
12 /include/ "skeleton.dtsi"
15 model = "Atmel AT91SAM9x5 family SoC";
16 compatible = "atmel,at91sam9x5";
17 interrupt-parent = <&aic>;
33 compatible = "arm,arm926ejs";
38 reg = <0x20000000 0x10000000>;
42 compatible = "simple-bus";
48 compatible = "simple-bus";
53 aic: interrupt-controller@fffff000 {
54 #interrupt-cells = <2>;
55 compatible = "atmel,at91rm9200-aic";
58 reg = <0xfffff000 0x200>;
61 ramc0: ramc@ffffe800 {
62 compatible = "atmel,at91sam9g45-ddramc";
63 reg = <0xffffe800 0x200>;
67 compatible = "atmel,at91rm9200-pmc";
68 reg = <0xfffffc00 0x100>;
72 compatible = "atmel,at91sam9g45-rstc";
73 reg = <0xfffffe00 0x10>;
77 compatible = "atmel,at91sam9x5-shdwc";
78 reg = <0xfffffe10 0x10>;
82 compatible = "atmel,at91sam9260-pit";
83 reg = <0xfffffe30 0xf>;
87 tcb0: timer@f8008000 {
88 compatible = "atmel,at91sam9x5-tcb";
89 reg = <0xf8008000 0x100>;
93 tcb1: timer@f800c000 {
94 compatible = "atmel,at91sam9x5-tcb";
95 reg = <0xf800c000 0x100>;
99 dma0: dma-controller@ffffec00 {
100 compatible = "atmel,at91sam9g45-dma";
101 reg = <0xffffec00 0x200>;
105 dma1: dma-controller@ffffee00 {
106 compatible = "atmel,at91sam9g45-dma";
107 reg = <0xffffee00 0x200>;
111 pioA: gpio@fffff400 {
112 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
113 reg = <0xfffff400 0x100>;
117 interrupt-controller;
120 pioB: gpio@fffff600 {
121 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
122 reg = <0xfffff600 0x100>;
126 interrupt-controller;
129 pioC: gpio@fffff800 {
130 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
131 reg = <0xfffff800 0x100>;
135 interrupt-controller;
138 pioD: gpio@fffffa00 {
139 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
140 reg = <0xfffffa00 0x100>;
144 interrupt-controller;
147 dbgu: serial@fffff200 {
148 compatible = "atmel,at91sam9260-usart";
149 reg = <0xfffff200 0x200>;
154 usart0: serial@f801c000 {
155 compatible = "atmel,at91sam9260-usart";
156 reg = <0xf801c000 0x200>;
163 usart1: serial@f8020000 {
164 compatible = "atmel,at91sam9260-usart";
165 reg = <0xf8020000 0x200>;
172 usart2: serial@f8024000 {
173 compatible = "atmel,at91sam9260-usart";
174 reg = <0xf8024000 0x200>;
181 macb0: ethernet@f802c000 {
182 compatible = "cdns,at32ap7000-macb", "cdns,macb";
183 reg = <0xf802c000 0x100>;
188 macb1: ethernet@f8030000 {
189 compatible = "cdns,at32ap7000-macb", "cdns,macb";
190 reg = <0xf8030000 0x100>;
196 nand0: nand@40000000 {
197 compatible = "atmel,at91rm9200-nand";
198 #address-cells = <1>;
200 reg = <0x40000000 0x10000000
202 atmel,nand-addr-offset = <21>;
203 atmel,nand-cmd-offset = <22>;
211 usb0: ohci@00600000 {
212 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
213 reg = <0x00600000 0x100000>;
218 usb1: ehci@00700000 {
219 compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
220 reg = <0x00700000 0x100000>;
227 compatible = "i2c-gpio";
228 gpios = <&pioA 30 0 /* sda */
231 i2c-gpio,sda-open-drain;
232 i2c-gpio,scl-open-drain;
233 i2c-gpio,delay-us = <2>; /* ~100 kHz */
234 #address-cells = <1>;
240 compatible = "i2c-gpio";
241 gpios = <&pioC 0 0 /* sda */
244 i2c-gpio,sda-open-drain;
245 i2c-gpio,scl-open-drain;
246 i2c-gpio,delay-us = <2>; /* ~100 kHz */
247 #address-cells = <1>;
253 compatible = "i2c-gpio";
254 gpios = <&pioB 4 0 /* sda */
257 i2c-gpio,sda-open-drain;
258 i2c-gpio,scl-open-drain;
259 i2c-gpio,delay-us = <2>; /* ~100 kHz */
260 #address-cells = <1>;