arch/arm/boot/dts/at91sam9x5.dtsi

   1 /*
   2  * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
   3  *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
   4  *                   AT91SAM9X25, AT91SAM9X35 SoC
   5  *
   6  *  Copyright (C) 2012 Atmel,
   7  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   8  *
   9  * Licensed under GPLv2 or later.
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         model = "Atmel AT91SAM9x5 family SoC";
  16         compatible = "atmel,at91sam9x5";
  17         interrupt-parent = <&aic>;
  18
  19         aliases {
  20                 serial0 = &dbgu;
  21                 serial1 = &usart0;
  22                 serial2 = &usart1;
  23                 serial3 = &usart2;
  24                 gpio0 = &pioA;
  25                 gpio1 = &pioB;
  26                 gpio2 = &pioC;
  27                 gpio3 = &pioD;
  28                 tcb0 = &tcb0;
  29                 tcb1 = &tcb1;
  30         };
  31         cpus {
  32                 cpu@0 {
  33                         compatible = "arm,arm926ejs";
  34                 };
  35         };
  36
  37         memory@20000000 {
  38                 reg = <0x20000000 0x10000000>;
  39         };
  40
  41         ahb {
  42                 compatible = "simple-bus";
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 ranges;
  46
  47                 apb {
  48                         compatible = "simple-bus";
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51                         ranges;
  52
  53                         aic: interrupt-controller@fffff000 {
  54                                 #interrupt-cells = <2>;
  55                                 compatible = "atmel,at91rm9200-aic";
  56                                 interrupt-controller;
  57                                 interrupt-parent;
  58                                 reg = <0xfffff000 0x200>;
  59                         };
  60
  61                         pmc: pmc@fffffc00 {
  62                                 compatible = "atmel,at91rm9200-pmc";
  63                                 reg = <0xfffffc00 0x100>;
  64                         };
  65
  66                         rstc@fffffe00 {
  67                                 compatible = "atmel,at91sam9g45-rstc";
  68                                 reg = <0xfffffe00 0x10>;
  69                         };
  70
  71                         pit: timer@fffffe30 {
  72                                 compatible = "atmel,at91sam9260-pit";
  73                                 reg = <0xfffffe30 0xf>;
  74                                 interrupts = <1 4>;
  75                         };
  76
  77                         tcb0: timer@f8008000 {
  78                                 compatible = "atmel,at91sam9x5-tcb";
  79                                 reg = <0xf8008000 0x100>;
  80                                 interrupts = <17 4>;
  81                         };
  82
  83                         tcb1: timer@f800c000 {
  84                                 compatible = "atmel,at91sam9x5-tcb";
  85                                 reg = <0xf800c000 0x100>;
  86                                 interrupts = <17 4>;
  87                         };
  88
  89                         dma0: dma-controller@ffffec00 {
  90                                 compatible = "atmel,at91sam9g45-dma";
  91                                 reg = <0xffffec00 0x200>;
  92                                 interrupts = <20 4>;
  93                         };
  94
  95                         dma1: dma-controller@ffffee00 {
  96                                 compatible = "atmel,at91sam9g45-dma";
  97                                 reg = <0xffffee00 0x200>;
  98                                 interrupts = <21 4>;
  99                         };
 100
 101                         pioA: gpio@fffff400 {
 102                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 103                                 reg = <0xfffff400 0x100>;
 104                                 interrupts = <2 4>;
 105                                 #gpio-cells = <2>;
 106                                 gpio-controller;
 107                                 interrupt-controller;
 108                         };
 109
 110                         pioB: gpio@fffff600 {
 111                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 112                                 reg = <0xfffff600 0x100>;
 113                                 interrupts = <2 4>;
 114                                 #gpio-cells = <2>;
 115                                 gpio-controller;
 116                                 interrupt-controller;
 117                         };
 118
 119                         pioC: gpio@fffff800 {
 120                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 121                                 reg = <0xfffff800 0x100>;
 122                                 interrupts = <3 4>;
 123                                 #gpio-cells = <2>;
 124                                 gpio-controller;
 125                                 interrupt-controller;
 126                         };
 127
 128                         pioD: gpio@fffffa00 {
 129                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 130                                 reg = <0xfffffa00 0x100>;
 131                                 interrupts = <3 4>;
 132                                 #gpio-cells = <2>;
 133                                 gpio-controller;
 134                                 interrupt-controller;
 135                         };
 136
 137                         dbgu: serial@fffff200 {
 138                                 compatible = "atmel,at91sam9260-usart";
 139                                 reg = <0xfffff200 0x200>;
 140                                 interrupts = <1 4>;
 141                                 status = "disabled";
 142                         };
 143
 144                         usart0: serial@f801c000 {
 145                                 compatible = "atmel,at91sam9260-usart";
 146                                 reg = <0xf801c000 0x200>;
 147                                 interrupts = <5 4>;
 148                                 atmel,use-dma-rx;
 149                                 atmel,use-dma-tx;
 150                                 status = "disabled";
 151                         };
 152
 153                         usart1: serial@f8020000 {
 154                                 compatible = "atmel,at91sam9260-usart";
 155                                 reg = <0xf8020000 0x200>;
 156                                 interrupts = <6 4>;
 157                                 atmel,use-dma-rx;
 158                                 atmel,use-dma-tx;
 159                                 status = "disabled";
 160                         };
 161
 162                         usart2: serial@f8024000 {
 163                                 compatible = "atmel,at91sam9260-usart";
 164                                 reg = <0xf8024000 0x200>;
 165                                 interrupts = <7 4>;
 166                                 atmel,use-dma-rx;
 167                                 atmel,use-dma-tx;
 168                                 status = "disabled";
 169                         };
 170
 171                         macb0: ethernet@f802c000 {
 172                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
 173                                 reg = <0xf802c000 0x100>;
 174                                 interrupts = <24 4>;
 175                                 status = "disabled";
 176                         };
 177
 178                         macb1: ethernet@f8030000 {
 179                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
 180                                 reg = <0xf8030000 0x100>;
 181                                 interrupts = <27 4>;
 182                                 status = "disabled";
 183                         };
 184                 };
 185
 186                 nand0: nand@40000000 {
 187                         compatible = "atmel,at91rm9200-nand";
 188                         #address-cells = <1>;
 189                         #size-cells = <1>;
 190                         reg = <0x40000000 0x10000000
 191                               >;
 192                         atmel,nand-addr-offset = <21>;
 193                         atmel,nand-cmd-offset = <22>;
 194                         gpios = <&pioC 8 0
 195                                  &pioC 14 0
 196                                  0
 197                                 >;
 198                         status = "disabled";
 199                 };
 200         };
 201
 202         i2c@0 {
 203                 compatible = "i2c-gpio";
 204                 gpios = <&pioA 30 0 /* sda */
 205                          &pioA 31 0 /* scl */
 206                         >;
 207                 i2c-gpio,sda-open-drain;
 208                 i2c-gpio,scl-open-drain;
 209                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 210                 #address-cells = <1>;
 211                 #size-cells = <0>;
 212                 status = "disabled";
 213         };
 214
 215         i2c@1 {
 216                 compatible = "i2c-gpio";
 217                 gpios = <&pioC 0 0 /* sda */
 218                          &pioC 1 0 /* scl */
 219                         >;
 220                 i2c-gpio,sda-open-drain;
 221                 i2c-gpio,scl-open-drain;
 222                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 223                 #address-cells = <1>;
 224                 #size-cells = <0>;
 225                 status = "disabled";
 226         };
 227
 228         i2c@2 {
 229                 compatible = "i2c-gpio";
 230                 gpios = <&pioB 4 0 /* sda */
 231                          &pioB 5 0 /* scl */
 232                         >;
 233                 i2c-gpio,sda-open-drain;
 234                 i2c-gpio,scl-open-drain;
 235                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 236                 #address-cells = <1>;
 237                 #size-cells = <0>;
 238                 status = "disabled";
 239         };
 240 };