2 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
3 * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
4 * AT91SAM9X25, AT91SAM9X35 SoC
6 * Copyright (C) 2012 Atmel,
7 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
9 * Licensed under GPLv2 or later.
12 /include/ "skeleton.dtsi"
15 model = "Atmel AT91SAM9x5 family SoC";
16 compatible = "atmel,at91sam9x5";
17 interrupt-parent = <&aic>;
33 compatible = "arm,arm926ejs";
38 reg = <0x20000000 0x10000000>;
42 compatible = "simple-bus";
48 compatible = "simple-bus";
53 aic: interrupt-controller@fffff000 {
54 #interrupt-cells = <2>;
55 compatible = "atmel,at91rm9200-aic";
58 reg = <0xfffff000 0x200>;
62 compatible = "atmel,at91rm9200-pmc";
63 reg = <0xfffffc00 0x100>;
67 compatible = "atmel,at91sam9g45-rstc";
68 reg = <0xfffffe00 0x10>;
72 compatible = "atmel,at91sam9260-pit";
73 reg = <0xfffffe30 0xf>;
77 tcb0: timer@f8008000 {
78 compatible = "atmel,at91sam9x5-tcb";
79 reg = <0xf8008000 0x100>;
83 tcb1: timer@f800c000 {
84 compatible = "atmel,at91sam9x5-tcb";
85 reg = <0xf800c000 0x100>;
89 dma0: dma-controller@ffffec00 {
90 compatible = "atmel,at91sam9g45-dma";
91 reg = <0xffffec00 0x200>;
95 dma1: dma-controller@ffffee00 {
96 compatible = "atmel,at91sam9g45-dma";
97 reg = <0xffffee00 0x200>;
101 pioA: gpio@fffff400 {
102 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
103 reg = <0xfffff400 0x100>;
107 interrupt-controller;
110 pioB: gpio@fffff600 {
111 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
112 reg = <0xfffff600 0x100>;
116 interrupt-controller;
119 pioC: gpio@fffff800 {
120 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
121 reg = <0xfffff800 0x100>;
125 interrupt-controller;
128 pioD: gpio@fffffa00 {
129 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
130 reg = <0xfffffa00 0x100>;
134 interrupt-controller;
137 dbgu: serial@fffff200 {
138 compatible = "atmel,at91sam9260-usart";
139 reg = <0xfffff200 0x200>;
144 usart0: serial@f801c000 {
145 compatible = "atmel,at91sam9260-usart";
146 reg = <0xf801c000 0x200>;
153 usart1: serial@f8020000 {
154 compatible = "atmel,at91sam9260-usart";
155 reg = <0xf8020000 0x200>;
162 usart2: serial@f8024000 {
163 compatible = "atmel,at91sam9260-usart";
164 reg = <0xf8024000 0x200>;
171 macb0: ethernet@f802c000 {
172 compatible = "cdns,at32ap7000-macb", "cdns,macb";
173 reg = <0xf802c000 0x100>;
178 macb1: ethernet@f8030000 {
179 compatible = "cdns,at32ap7000-macb", "cdns,macb";
180 reg = <0xf8030000 0x100>;
186 nand0: nand@40000000 {
187 compatible = "atmel,at91rm9200-nand";
188 #address-cells = <1>;
190 reg = <0x40000000 0x10000000
192 atmel,nand-addr-offset = <21>;
193 atmel,nand-cmd-offset = <22>;
203 compatible = "i2c-gpio";
204 gpios = <&pioA 30 0 /* sda */
207 i2c-gpio,sda-open-drain;
208 i2c-gpio,scl-open-drain;
209 i2c-gpio,delay-us = <2>; /* ~100 kHz */
210 #address-cells = <1>;
216 compatible = "i2c-gpio";
217 gpios = <&pioC 0 0 /* sda */
220 i2c-gpio,sda-open-drain;
221 i2c-gpio,scl-open-drain;
222 i2c-gpio,delay-us = <2>; /* ~100 kHz */
223 #address-cells = <1>;
229 compatible = "i2c-gpio";
230 gpios = <&pioB 4 0 /* sda */
233 i2c-gpio,sda-open-drain;
234 i2c-gpio,scl-open-drain;
235 i2c-gpio,delay-us = <2>; /* ~100 kHz */
236 #address-cells = <1>;