6 model = "SolidRun CuBox";
7 compatible = "solidrun,cubox", "marvell,dove";
10 device_type = "memory";
11 reg = <0x00000000 0x40000000>;
15 bootargs = "console=ttyS0,115200n8 earlyprintk";
19 compatible = "gpio-leds";
20 pinctrl-0 = <&pmx_gpio_18>;
21 pinctrl-names = "default";
25 gpios = <&gpio0 18 1>;
26 linux,default-trigger = "default-on";
31 compatible = "simple-bus";
35 usb_power: regulator@1 {
36 compatible = "regulator-fixed";
38 regulator-name = "USB Power";
39 regulator-min-microvolt = <5000000>;
40 regulator-max-microvolt = <5000000>;
49 /* 25MHz reference crystal */
51 compatible = "fixed-clock";
53 clock-frequency = <25000000>;
58 &uart0 { status = "okay"; };
59 &sata0 { status = "okay"; };
63 clock-frequency = <100000>;
65 si5351: clock-generator {
66 compatible = "silabs,si5351a-msop";
72 /* connect xtal input to 25MHz reference */
75 /* connect xtal input as source of pll0 and pll1 */
76 silabs,pll-source = <0 0>, <1 0>;
80 silabs,drive-strength = <8>;
81 silabs,multisynth-source = <0>;
82 silabs,clock-source = <0>;
88 silabs,drive-strength = <8>;
89 silabs,multisynth-source = <1>;
90 silabs,clock-source = <0>;
96 silabs,multisynth-source = <1>;
97 silabs,clock-source = <0>;
104 /* sdio0 card detect is connected to wrong pin on CuBox */
105 cd-gpios = <&gpio0 12 1>;
111 /* spi0.0: 4M Flash Winbond W25Q32BV */
113 compatible = "st,w25q32";
114 spi-max-frequency = <20000000>;
120 pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
121 pinctrl-names = "default";
123 pmx_gpio_1: pmx-gpio-1 {
124 marvell,pins = "mpp1";
125 marvell,function = "gpio";
128 pmx_gpio_12: pmx-gpio-12 {
129 marvell,pins = "mpp12";
130 marvell,function = "gpio";
133 pmx_gpio_18: pmx-gpio-18 {
134 marvell,pins = "mpp18";
135 marvell,function = "gpio";