2 * Samsung's Exynos3250 based Monk board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Monk board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include <dt-bindings/input/input.h>
20 model = "Samsung Monk board";
21 compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
28 reg = <0x40000000 0x1ff00000>;
32 compatible = "samsung,secure-firmware";
33 reg = <0x0205F000 0x1000>;
37 compatible = "gpio-keys";
40 interrupt-parent = <&gpx2>;
43 linux,code = <KEY_POWER>;
45 debounce-interval = <10>;
50 vemmc_reg: voltage-regulator-0 {
51 compatible = "regulator-fixed";
52 regulator-name = "V_EMMC_2.8V-fixed";
53 regulator-min-microvolt = <2800000>;
54 regulator-max-microvolt = <2800000>;
59 i2c_max77836: i2c-gpio-0 {
60 compatible = "i2c-gpio";
61 gpios = <&gpd0 2 0>, <&gpd0 3 0>;
65 max77836: subpmic@25 {
66 compatible = "maxim,max77836";
67 interrupt-parent = <&gpx1>;
73 compatible = "maxim,max77836-muic";
77 compatible = "maxim,max77836-regulator";
78 safeout_reg: SAFEOUT {
79 regulator-name = "SAFEOUT";
82 charger_reg: CHARGER {
83 regulator-name = "CHARGER";
84 regulator-min-microamp = <45000>;
85 regulator-max-microamp = <475000>;
90 regulator-name = "MOT_2.7V";
91 regulator-min-microvolt = <1100000>;
92 regulator-max-microvolt = <2700000>;
96 regulator-name = "UNUSED_LDO2";
97 regulator-min-microvolt = <800000>;
98 regulator-max-microvolt = <3950000>;
103 compatible = "maxim,max77836-charger";
105 maxim,constant-uvolt = <4350000>;
106 maxim,fast-charge-uamp = <225000>;
107 maxim,eoc-uamp = <7500>;
108 maxim,ovp-uvolt = <6500000>;
115 vdd-supply = <&ldo3_reg>;
117 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
118 assigned-clock-rates = <6000000>;
121 compatible = "ntc,ncp15wb473";
122 pullup-uv = <1800000>;
123 pullup-ohm = <100000>;
124 pulldown-ohm = <100000>;
125 io-channels = <&adc 0>;
129 compatible = "ntc,ncp15wb473";
130 pullup-uv = <1800000>;
131 pullup-ohm = <100000>;
132 pulldown-ohm = <100000>;
133 io-channels = <&adc 1>;
138 #address-cells = <1>;
140 samsung,i2c-sda-delay = <100>;
141 samsung,i2c-slave-addr = <0x10>;
142 samsung,i2c-max-bus-freq = <100000>;
146 compatible = "samsung,s2mps14-pmic";
147 interrupt-parent = <&gpx0>;
152 s2mps14_osc: clocks {
153 compatible = "samsung,s2mps14-clk";
155 clock-output-names = "s2mps14_ap", "unused",
161 regulator-name = "VAP_ALIVE_1.0V";
162 regulator-min-microvolt = <1000000>;
163 regulator-max-microvolt = <1000000>;
168 regulator-name = "VAP_M1_1.2V";
169 regulator-min-microvolt = <1200000>;
170 regulator-max-microvolt = <1200000>;
175 regulator-name = "VCC_AP_1.8V";
176 regulator-min-microvolt = <1800000>;
177 regulator-max-microvolt = <1800000>;
182 regulator-name = "VAP_AVDD_PLL1";
183 regulator-min-microvolt = <1800000>;
184 regulator-max-microvolt = <1800000>;
189 regulator-name = "VAP_PLL_ISO_1.0V";
190 regulator-min-microvolt = <1000000>;
191 regulator-max-microvolt = <1000000>;
196 regulator-name = "VAP_MIPI_1.0V";
197 regulator-min-microvolt = <1000000>;
198 regulator-max-microvolt = <1000000>;
202 regulator-name = "VAP_AVDD_1.8V";
203 regulator-min-microvolt = <1800000>;
204 regulator-max-microvolt = <1800000>;
209 regulator-name = "VAP_USB_3.0V";
210 regulator-min-microvolt = <3000000>;
211 regulator-max-microvolt = <3000000>;
216 regulator-name = "V_LPDDR_1.2V";
217 regulator-min-microvolt = <1200000>;
218 regulator-max-microvolt = <1200000>;
223 regulator-name = "UNUSED_LDO10";
224 regulator-min-microvolt = <1000000>;
225 regulator-max-microvolt = <1000000>;
229 regulator-name = "V_EMMC_1.8V";
230 regulator-min-microvolt = <1800000>;
231 regulator-max-microvolt = <1800000>;
232 samsung,ext-control-gpios = <&gpk0 2 0>;
236 regulator-name = "V_EMMC_2.8V";
237 regulator-min-microvolt = <2800000>;
238 regulator-max-microvolt = <2800000>;
239 samsung,ext-control-gpios = <&gpk0 2 0>;
243 regulator-name = "VSENSOR_2.85V";
244 regulator-min-microvolt = <2850000>;
245 regulator-max-microvolt = <2850000>;
250 regulator-name = "UNUSED_LDO14";
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <1800000>;
256 regulator-name = "TSP_AVDD_3.3V";
257 regulator-min-microvolt = <3300000>;
258 regulator-max-microvolt = <3300000>;
262 regulator-name = "LCD_VDD_3.3V";
263 regulator-min-microvolt = <3300000>;
264 regulator-max-microvolt = <3300000>;
268 regulator-name = "UNUSED_LDO17";
269 regulator-min-microvolt = <1800000>;
270 regulator-max-microvolt = <1800000>;
274 regulator-name = "UNUSED_LDO18";
275 regulator-min-microvolt = <1800000>;
276 regulator-max-microvolt = <1800000>;
280 regulator-name = "TSP_VDD_1.8V";
281 regulator-min-microvolt = <1800000>;
282 regulator-max-microvolt = <1800000>;
286 regulator-name = "LCD_VDD_1.8V";
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <1800000>;
292 regulator-name = "UNUSED_LDO21";
293 regulator-min-microvolt = <1000000>;
294 regulator-max-microvolt = <1000000>;
298 regulator-name = "UNUSED_LDO22";
299 regulator-min-microvolt = <1000000>;
300 regulator-max-microvolt = <1000000>;
304 regulator-name = "UNUSED_LDO23";
305 regulator-min-microvolt = <1000000>;
306 regulator-max-microvolt = <1000000>;
311 regulator-name = "UNUSED_LDO24";
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
317 regulator-name = "UNUSED_LDO25";
318 regulator-min-microvolt = <1800000>;
319 regulator-max-microvolt = <1800000>;
323 regulator-name = "VAP_MIF_1.0V";
324 regulator-min-microvolt = <800000>;
325 regulator-max-microvolt = <900000>;
330 regulator-name = "VAP_ARM_1.0V";
331 regulator-min-microvolt = <850000>;
332 regulator-max-microvolt = <1150000>;
337 regulator-name = "VAP_INT3D_1.0V";
338 regulator-min-microvolt = <850000>;
339 regulator-max-microvolt = <1000000>;
344 regulator-name = "VCC_SUB_1.95V";
345 regulator-min-microvolt = <1950000>;
346 regulator-max-microvolt = <1950000>;
351 regulator-name = "VCC_SUB_1.35V";
352 regulator-min-microvolt = <1350000>;
353 regulator-max-microvolt = <1350000>;
361 #address-cells = <1>;
363 samsung,i2c-sda-delay = <100>;
364 samsung,i2c-slave-addr = <0x10>;
365 samsung,i2c-max-bus-freq = <400000>;
369 compatible = "maxim,max77836-battery";
370 interrupt-parent = <&gpx1>;
381 #address-cells = <1>;
389 card-detect-delay = <200>;
390 vmmc-supply = <&vemmc_reg>;
391 clock-frequency = <100000000>;
392 clock-freq-min-max = <400000 100000000>;
393 samsung,dw-mshc-ciu-div = <1>;
394 samsung,dw-mshc-sdr-timing = <0 1>;
395 samsung,dw-mshc-ddr-timing = <1 2>;
396 pinctrl-names = "default";
397 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
403 assigned-clocks = <&cmu CLK_SCLK_UART0>;
404 assigned-clock-rates = <100000000>;
413 vtmu-supply = <&ldo7_reg>;
418 clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
419 clock-names = "rtc", "rtc_src";
424 clock-frequency = <24000000>;
428 pinctrl-names = "default";
429 pinctrl-0 = <&sleep0>;
431 sleep0: sleep-state {
432 PIN_SLP(gpa0-0, INPUT, DOWN);
433 PIN_SLP(gpa0-1, INPUT, DOWN);
434 PIN_SLP(gpa0-2, INPUT, DOWN);
435 PIN_SLP(gpa0-3, INPUT, DOWN);
436 PIN_SLP(gpa0-4, INPUT, DOWN);
437 PIN_SLP(gpa0-5, INPUT, DOWN);
438 PIN_SLP(gpa0-6, INPUT, DOWN);
439 PIN_SLP(gpa0-7, INPUT, DOWN);
441 PIN_SLP(gpa1-0, INPUT, DOWN);
442 PIN_SLP(gpa1-1, INPUT, DOWN);
443 PIN_SLP(gpa1-2, INPUT, DOWN);
444 PIN_SLP(gpa1-3, INPUT, DOWN);
445 PIN_SLP(gpa1-4, INPUT, DOWN);
446 PIN_SLP(gpa1-5, INPUT, DOWN);
448 PIN_SLP(gpb-0, PREV, NONE);
449 PIN_SLP(gpb-1, PREV, NONE);
450 PIN_SLP(gpb-2, PREV, NONE);
451 PIN_SLP(gpb-3, PREV, NONE);
452 PIN_SLP(gpb-4, INPUT, DOWN);
453 PIN_SLP(gpb-5, INPUT, DOWN);
454 PIN_SLP(gpb-6, INPUT, DOWN);
455 PIN_SLP(gpb-7, INPUT, DOWN);
457 PIN_SLP(gpc0-0, INPUT, DOWN);
458 PIN_SLP(gpc0-1, INPUT, DOWN);
459 PIN_SLP(gpc0-2, INPUT, DOWN);
460 PIN_SLP(gpc0-3, INPUT, DOWN);
461 PIN_SLP(gpc0-4, INPUT, DOWN);
463 PIN_SLP(gpc1-0, INPUT, DOWN);
464 PIN_SLP(gpc1-1, INPUT, DOWN);
465 PIN_SLP(gpc1-2, INPUT, DOWN);
466 PIN_SLP(gpc1-3, INPUT, DOWN);
467 PIN_SLP(gpc1-4, INPUT, DOWN);
469 PIN_SLP(gpd0-0, INPUT, DOWN);
470 PIN_SLP(gpd0-1, INPUT, DOWN);
471 PIN_SLP(gpd0-2, INPUT, NONE);
472 PIN_SLP(gpd0-3, INPUT, NONE);
474 PIN_SLP(gpd1-0, INPUT, NONE);
475 PIN_SLP(gpd1-1, INPUT, NONE);
476 PIN_SLP(gpd1-2, INPUT, NONE);
477 PIN_SLP(gpd1-3, INPUT, NONE);
482 pinctrl-names = "default";
483 pinctrl-0 = <&sleep1>;
485 sleep1: sleep-state {
486 PIN_SLP(gpe0-0, PREV, NONE);
487 PIN_SLP(gpe0-1, PREV, NONE);
488 PIN_SLP(gpe0-2, INPUT, DOWN);
489 PIN_SLP(gpe0-3, INPUT, DOWN);
490 PIN_SLP(gpe0-4, PREV, NONE);
491 PIN_SLP(gpe0-5, INPUT, DOWN);
492 PIN_SLP(gpe0-6, INPUT, DOWN);
493 PIN_SLP(gpe0-7, INPUT, DOWN);
495 PIN_SLP(gpe1-0, INPUT, DOWN);
496 PIN_SLP(gpe1-1, PREV, NONE);
497 PIN_SLP(gpe1-2, INPUT, DOWN);
498 PIN_SLP(gpe1-3, INPUT, DOWN);
499 PIN_SLP(gpe1-4, INPUT, DOWN);
500 PIN_SLP(gpe1-5, INPUT, DOWN);
501 PIN_SLP(gpe1-6, INPUT, DOWN);
502 PIN_SLP(gpe1-7, INPUT, NONE);
504 PIN_SLP(gpe2-0, INPUT, NONE);
505 PIN_SLP(gpe2-1, INPUT, NONE);
506 PIN_SLP(gpe2-2, INPUT, NONE);
508 PIN_SLP(gpk0-0, INPUT, DOWN);
509 PIN_SLP(gpk0-1, INPUT, DOWN);
510 PIN_SLP(gpk0-2, OUT0, NONE);
511 PIN_SLP(gpk0-3, INPUT, DOWN);
512 PIN_SLP(gpk0-4, INPUT, DOWN);
513 PIN_SLP(gpk0-5, INPUT, DOWN);
514 PIN_SLP(gpk0-6, INPUT, DOWN);
515 PIN_SLP(gpk0-7, INPUT, DOWN);
517 PIN_SLP(gpk1-0, PREV, NONE);
518 PIN_SLP(gpk1-1, PREV, NONE);
519 PIN_SLP(gpk1-2, INPUT, DOWN);
520 PIN_SLP(gpk1-3, PREV, NONE);
521 PIN_SLP(gpk1-4, PREV, NONE);
522 PIN_SLP(gpk1-5, PREV, NONE);
523 PIN_SLP(gpk1-6, PREV, NONE);
525 PIN_SLP(gpk2-0, INPUT, DOWN);
526 PIN_SLP(gpk2-1, INPUT, DOWN);
527 PIN_SLP(gpk2-2, INPUT, DOWN);
528 PIN_SLP(gpk2-3, INPUT, DOWN);
529 PIN_SLP(gpk2-4, INPUT, DOWN);
530 PIN_SLP(gpk2-5, INPUT, DOWN);
531 PIN_SLP(gpk2-6, INPUT, DOWN);
533 PIN_SLP(gpl0-0, INPUT, DOWN);
534 PIN_SLP(gpl0-1, INPUT, DOWN);
535 PIN_SLP(gpl0-2, INPUT, DOWN);
536 PIN_SLP(gpl0-3, INPUT, DOWN);
538 PIN_SLP(gpm0-0, INPUT, DOWN);
539 PIN_SLP(gpm0-1, INPUT, DOWN);
540 PIN_SLP(gpm0-2, INPUT, DOWN);
541 PIN_SLP(gpm0-3, INPUT, DOWN);
542 PIN_SLP(gpm0-4, INPUT, DOWN);
543 PIN_SLP(gpm0-5, INPUT, DOWN);
544 PIN_SLP(gpm0-6, INPUT, DOWN);
545 PIN_SLP(gpm0-7, INPUT, DOWN);
547 PIN_SLP(gpm1-0, INPUT, DOWN);
548 PIN_SLP(gpm1-1, INPUT, DOWN);
549 PIN_SLP(gpm1-2, INPUT, DOWN);
550 PIN_SLP(gpm1-3, INPUT, DOWN);
551 PIN_SLP(gpm1-4, INPUT, DOWN);
552 PIN_SLP(gpm1-5, INPUT, DOWN);
553 PIN_SLP(gpm1-6, INPUT, DOWN);
555 PIN_SLP(gpm2-0, INPUT, DOWN);
556 PIN_SLP(gpm2-1, INPUT, DOWN);
557 PIN_SLP(gpm2-2, INPUT, DOWN);
558 PIN_SLP(gpm2-3, INPUT, DOWN);
559 PIN_SLP(gpm2-4, INPUT, DOWN);
561 PIN_SLP(gpm3-0, INPUT, DOWN);
562 PIN_SLP(gpm3-1, INPUT, DOWN);
563 PIN_SLP(gpm3-2, INPUT, DOWN);
564 PIN_SLP(gpm3-3, INPUT, DOWN);
565 PIN_SLP(gpm3-4, INPUT, DOWN);
566 PIN_SLP(gpm3-5, INPUT, DOWN);
567 PIN_SLP(gpm3-6, INPUT, DOWN);
568 PIN_SLP(gpm3-7, INPUT, DOWN);
570 PIN_SLP(gpm4-0, INPUT, DOWN);
571 PIN_SLP(gpm4-1, INPUT, DOWN);
572 PIN_SLP(gpm4-2, INPUT, DOWN);
573 PIN_SLP(gpm4-3, INPUT, DOWN);
574 PIN_SLP(gpm4-4, INPUT, DOWN);
575 PIN_SLP(gpm4-5, INPUT, DOWN);
576 PIN_SLP(gpm4-6, INPUT, DOWN);
577 PIN_SLP(gpm4-7, INPUT, DOWN);