2 * Samsung's Exynos3250 based Monk board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Monk board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include <dt-bindings/input/input.h>
18 #include <dt-bindings/gpio/gpio.h>
21 model = "Samsung Monk board";
22 compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
29 reg = <0x40000000 0x1ff00000>;
33 compatible = "samsung,secure-firmware";
34 reg = <0x0205F000 0x1000>;
38 compatible = "gpio-keys";
41 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_POWER>;
44 debounce-interval = <10>;
49 vemmc_reg: voltage-regulator-0 {
50 compatible = "regulator-fixed";
51 regulator-name = "V_EMMC_2.8V-fixed";
52 regulator-min-microvolt = <2800000>;
53 regulator-max-microvolt = <2800000>;
58 i2c_max77836: i2c-gpio-0 {
59 compatible = "i2c-gpio";
60 gpios = <&gpd0 2 0>, <&gpd0 3 0>;
64 max77836: subpmic@25 {
65 compatible = "maxim,max77836";
66 interrupt-parent = <&gpx1>;
72 compatible = "maxim,max77836-muic";
76 compatible = "maxim,max77836-regulator";
77 safeout_reg: SAFEOUT {
78 regulator-name = "SAFEOUT";
81 charger_reg: CHARGER {
82 regulator-name = "CHARGER";
83 regulator-min-microamp = <45000>;
84 regulator-max-microamp = <475000>;
89 regulator-name = "MOT_2.7V";
90 regulator-min-microvolt = <1100000>;
91 regulator-max-microvolt = <2700000>;
95 regulator-name = "UNUSED_LDO2";
96 regulator-min-microvolt = <800000>;
97 regulator-max-microvolt = <3950000>;
102 compatible = "maxim,max77836-charger";
104 maxim,constant-uvolt = <4350000>;
105 maxim,fast-charge-uamp = <225000>;
106 maxim,eoc-uamp = <7500>;
107 maxim,ovp-uvolt = <6500000>;
113 compatible = "regulator-haptic";
114 haptic-supply = <&motor_reg>;
115 min-microvolt = <1100000>;
116 max-microvolt = <2700000>;
121 vdd-supply = <&ldo3_reg>;
123 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
124 assigned-clock-rates = <6000000>;
127 compatible = "ntc,ncp15wb473";
128 pullup-uv = <1800000>;
129 pullup-ohm = <100000>;
130 pulldown-ohm = <100000>;
131 io-channels = <&adc 0>;
135 compatible = "ntc,ncp15wb473";
136 pullup-uv = <1800000>;
137 pullup-ohm = <100000>;
138 pulldown-ohm = <100000>;
139 io-channels = <&adc 1>;
148 vusb_d-supply = <&ldo15_reg>;
149 vusb_a-supply = <&ldo12_reg>;
150 dr_mode = "peripheral";
155 #address-cells = <1>;
157 samsung,i2c-sda-delay = <100>;
158 samsung,i2c-slave-addr = <0x10>;
159 samsung,i2c-max-bus-freq = <100000>;
163 compatible = "samsung,s2mps14-pmic";
164 interrupt-parent = <&gpx0>;
169 s2mps14_osc: clocks {
170 compatible = "samsung,s2mps14-clk";
172 clock-output-names = "s2mps14_ap", "unused",
178 regulator-name = "VAP_ALIVE_1.0V";
179 regulator-min-microvolt = <1000000>;
180 regulator-max-microvolt = <1000000>;
185 regulator-name = "VAP_M1_1.2V";
186 regulator-min-microvolt = <1200000>;
187 regulator-max-microvolt = <1200000>;
192 regulator-name = "VCC_AP_1.8V";
193 regulator-min-microvolt = <1800000>;
194 regulator-max-microvolt = <1800000>;
199 regulator-name = "VAP_AVDD_PLL1";
200 regulator-min-microvolt = <1800000>;
201 regulator-max-microvolt = <1800000>;
206 regulator-name = "VAP_PLL_ISO_1.0V";
207 regulator-min-microvolt = <1000000>;
208 regulator-max-microvolt = <1000000>;
213 regulator-name = "VAP_MIPI_1.0V";
214 regulator-min-microvolt = <1000000>;
215 regulator-max-microvolt = <1000000>;
219 regulator-name = "VAP_AVDD_1.8V";
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
226 regulator-name = "VAP_USB_3.0V";
227 regulator-min-microvolt = <3000000>;
228 regulator-max-microvolt = <3000000>;
233 regulator-name = "V_LPDDR_1.2V";
234 regulator-min-microvolt = <1200000>;
235 regulator-max-microvolt = <1200000>;
240 regulator-name = "UNUSED_LDO10";
241 regulator-min-microvolt = <1000000>;
242 regulator-max-microvolt = <1000000>;
246 regulator-name = "V_EMMC_1.8V";
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <1800000>;
249 samsung,ext-control-gpios = <&gpk0 2 0>;
253 regulator-name = "V_EMMC_2.8V";
254 regulator-min-microvolt = <2800000>;
255 regulator-max-microvolt = <2800000>;
256 samsung,ext-control-gpios = <&gpk0 2 0>;
260 regulator-name = "VSENSOR_2.85V";
261 regulator-min-microvolt = <2850000>;
262 regulator-max-microvolt = <2850000>;
267 regulator-name = "UNUSED_LDO14";
268 regulator-min-microvolt = <1800000>;
269 regulator-max-microvolt = <1800000>;
273 regulator-name = "TSP_AVDD_3.3V";
274 regulator-min-microvolt = <3300000>;
275 regulator-max-microvolt = <3300000>;
279 regulator-name = "LCD_VDD_3.3V";
280 regulator-min-microvolt = <3300000>;
281 regulator-max-microvolt = <3300000>;
285 regulator-name = "UNUSED_LDO17";
286 regulator-min-microvolt = <1800000>;
287 regulator-max-microvolt = <1800000>;
291 regulator-name = "UNUSED_LDO18";
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <1800000>;
297 regulator-name = "TSP_VDD_1.8V";
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <1800000>;
303 regulator-name = "LCD_VDD_1.8V";
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <1800000>;
309 regulator-name = "UNUSED_LDO21";
310 regulator-min-microvolt = <1000000>;
311 regulator-max-microvolt = <1000000>;
315 regulator-name = "UNUSED_LDO22";
316 regulator-min-microvolt = <1000000>;
317 regulator-max-microvolt = <1000000>;
321 regulator-name = "UNUSED_LDO23";
322 regulator-min-microvolt = <1000000>;
323 regulator-max-microvolt = <1000000>;
328 regulator-name = "UNUSED_LDO24";
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <1800000>;
334 regulator-name = "UNUSED_LDO25";
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <1800000>;
340 regulator-name = "VAP_MIF_1.0V";
341 regulator-min-microvolt = <800000>;
342 regulator-max-microvolt = <900000>;
347 regulator-name = "VAP_ARM_1.0V";
348 regulator-min-microvolt = <850000>;
349 regulator-max-microvolt = <1150000>;
354 regulator-name = "VAP_INT3D_1.0V";
355 regulator-min-microvolt = <850000>;
356 regulator-max-microvolt = <1000000>;
361 regulator-name = "VCC_SUB_1.95V";
362 regulator-min-microvolt = <1950000>;
363 regulator-max-microvolt = <1950000>;
368 regulator-name = "VCC_SUB_1.35V";
369 regulator-min-microvolt = <1350000>;
370 regulator-max-microvolt = <1350000>;
378 #address-cells = <1>;
380 samsung,i2c-sda-delay = <100>;
381 samsung,i2c-slave-addr = <0x10>;
382 samsung,i2c-max-bus-freq = <400000>;
386 compatible = "maxim,max77836-battery";
387 interrupt-parent = <&gpx1>;
398 #address-cells = <1>;
406 card-detect-delay = <200>;
407 vmmc-supply = <&vemmc_reg>;
408 clock-frequency = <100000000>;
409 clock-freq-min-max = <400000 100000000>;
410 samsung,dw-mshc-ciu-div = <1>;
411 samsung,dw-mshc-sdr-timing = <0 1>;
412 samsung,dw-mshc-ddr-timing = <1 2>;
413 pinctrl-names = "default";
414 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
420 assigned-clocks = <&cmu CLK_SCLK_UART0>;
421 assigned-clock-rates = <100000000>;
430 vtmu-supply = <&ldo7_reg>;
435 clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
436 clock-names = "rtc", "rtc_src";
444 ppmu_dmc0_3: ppmu-event3-dmc0 {
445 event-name = "ppmu-event3-dmc0";
454 ppmu_dmc1_3: ppmu-event3-dmc1 {
455 event-name = "ppmu-event3-dmc1";
464 ppmu_leftbus_3: ppmu-event3-leftbus {
465 event-name = "ppmu-event3-leftbus";
474 ppmu_rightbus_3: ppmu-event3-rightbus {
475 event-name = "ppmu-event3-rightbus";
481 clock-frequency = <24000000>;
485 pinctrl-names = "default";
486 pinctrl-0 = <&sleep0>;
488 sleep0: sleep-state {
489 PIN_SLP(gpa0-0, INPUT, DOWN);
490 PIN_SLP(gpa0-1, INPUT, DOWN);
491 PIN_SLP(gpa0-2, INPUT, DOWN);
492 PIN_SLP(gpa0-3, INPUT, DOWN);
493 PIN_SLP(gpa0-4, INPUT, DOWN);
494 PIN_SLP(gpa0-5, INPUT, DOWN);
495 PIN_SLP(gpa0-6, INPUT, DOWN);
496 PIN_SLP(gpa0-7, INPUT, DOWN);
498 PIN_SLP(gpa1-0, INPUT, DOWN);
499 PIN_SLP(gpa1-1, INPUT, DOWN);
500 PIN_SLP(gpa1-2, INPUT, DOWN);
501 PIN_SLP(gpa1-3, INPUT, DOWN);
502 PIN_SLP(gpa1-4, INPUT, DOWN);
503 PIN_SLP(gpa1-5, INPUT, DOWN);
505 PIN_SLP(gpb-0, PREV, NONE);
506 PIN_SLP(gpb-1, PREV, NONE);
507 PIN_SLP(gpb-2, PREV, NONE);
508 PIN_SLP(gpb-3, PREV, NONE);
509 PIN_SLP(gpb-4, INPUT, DOWN);
510 PIN_SLP(gpb-5, INPUT, DOWN);
511 PIN_SLP(gpb-6, INPUT, DOWN);
512 PIN_SLP(gpb-7, INPUT, DOWN);
514 PIN_SLP(gpc0-0, INPUT, DOWN);
515 PIN_SLP(gpc0-1, INPUT, DOWN);
516 PIN_SLP(gpc0-2, INPUT, DOWN);
517 PIN_SLP(gpc0-3, INPUT, DOWN);
518 PIN_SLP(gpc0-4, INPUT, DOWN);
520 PIN_SLP(gpc1-0, INPUT, DOWN);
521 PIN_SLP(gpc1-1, INPUT, DOWN);
522 PIN_SLP(gpc1-2, INPUT, DOWN);
523 PIN_SLP(gpc1-3, INPUT, DOWN);
524 PIN_SLP(gpc1-4, INPUT, DOWN);
526 PIN_SLP(gpd0-0, INPUT, DOWN);
527 PIN_SLP(gpd0-1, INPUT, DOWN);
528 PIN_SLP(gpd0-2, INPUT, NONE);
529 PIN_SLP(gpd0-3, INPUT, NONE);
531 PIN_SLP(gpd1-0, INPUT, NONE);
532 PIN_SLP(gpd1-1, INPUT, NONE);
533 PIN_SLP(gpd1-2, INPUT, NONE);
534 PIN_SLP(gpd1-3, INPUT, NONE);
539 pinctrl-names = "default";
540 pinctrl-0 = <&sleep1>;
542 sleep1: sleep-state {
543 PIN_SLP(gpe0-0, PREV, NONE);
544 PIN_SLP(gpe0-1, PREV, NONE);
545 PIN_SLP(gpe0-2, INPUT, DOWN);
546 PIN_SLP(gpe0-3, INPUT, DOWN);
547 PIN_SLP(gpe0-4, PREV, NONE);
548 PIN_SLP(gpe0-5, INPUT, DOWN);
549 PIN_SLP(gpe0-6, INPUT, DOWN);
550 PIN_SLP(gpe0-7, INPUT, DOWN);
552 PIN_SLP(gpe1-0, INPUT, DOWN);
553 PIN_SLP(gpe1-1, PREV, NONE);
554 PIN_SLP(gpe1-2, INPUT, DOWN);
555 PIN_SLP(gpe1-3, INPUT, DOWN);
556 PIN_SLP(gpe1-4, INPUT, DOWN);
557 PIN_SLP(gpe1-5, INPUT, DOWN);
558 PIN_SLP(gpe1-6, INPUT, DOWN);
559 PIN_SLP(gpe1-7, INPUT, NONE);
561 PIN_SLP(gpe2-0, INPUT, NONE);
562 PIN_SLP(gpe2-1, INPUT, NONE);
563 PIN_SLP(gpe2-2, INPUT, NONE);
565 PIN_SLP(gpk0-0, INPUT, DOWN);
566 PIN_SLP(gpk0-1, INPUT, DOWN);
567 PIN_SLP(gpk0-2, OUT0, NONE);
568 PIN_SLP(gpk0-3, INPUT, DOWN);
569 PIN_SLP(gpk0-4, INPUT, DOWN);
570 PIN_SLP(gpk0-5, INPUT, DOWN);
571 PIN_SLP(gpk0-6, INPUT, DOWN);
572 PIN_SLP(gpk0-7, INPUT, DOWN);
574 PIN_SLP(gpk1-0, PREV, NONE);
575 PIN_SLP(gpk1-1, PREV, NONE);
576 PIN_SLP(gpk1-2, INPUT, DOWN);
577 PIN_SLP(gpk1-3, PREV, NONE);
578 PIN_SLP(gpk1-4, PREV, NONE);
579 PIN_SLP(gpk1-5, PREV, NONE);
580 PIN_SLP(gpk1-6, PREV, NONE);
582 PIN_SLP(gpk2-0, INPUT, DOWN);
583 PIN_SLP(gpk2-1, INPUT, DOWN);
584 PIN_SLP(gpk2-2, INPUT, DOWN);
585 PIN_SLP(gpk2-3, INPUT, DOWN);
586 PIN_SLP(gpk2-4, INPUT, DOWN);
587 PIN_SLP(gpk2-5, INPUT, DOWN);
588 PIN_SLP(gpk2-6, INPUT, DOWN);
590 PIN_SLP(gpl0-0, INPUT, DOWN);
591 PIN_SLP(gpl0-1, INPUT, DOWN);
592 PIN_SLP(gpl0-2, INPUT, DOWN);
593 PIN_SLP(gpl0-3, INPUT, DOWN);
595 PIN_SLP(gpm0-0, INPUT, DOWN);
596 PIN_SLP(gpm0-1, INPUT, DOWN);
597 PIN_SLP(gpm0-2, INPUT, DOWN);
598 PIN_SLP(gpm0-3, INPUT, DOWN);
599 PIN_SLP(gpm0-4, INPUT, DOWN);
600 PIN_SLP(gpm0-5, INPUT, DOWN);
601 PIN_SLP(gpm0-6, INPUT, DOWN);
602 PIN_SLP(gpm0-7, INPUT, DOWN);
604 PIN_SLP(gpm1-0, INPUT, DOWN);
605 PIN_SLP(gpm1-1, INPUT, DOWN);
606 PIN_SLP(gpm1-2, INPUT, DOWN);
607 PIN_SLP(gpm1-3, INPUT, DOWN);
608 PIN_SLP(gpm1-4, INPUT, DOWN);
609 PIN_SLP(gpm1-5, INPUT, DOWN);
610 PIN_SLP(gpm1-6, INPUT, DOWN);
612 PIN_SLP(gpm2-0, INPUT, DOWN);
613 PIN_SLP(gpm2-1, INPUT, DOWN);
614 PIN_SLP(gpm2-2, INPUT, DOWN);
615 PIN_SLP(gpm2-3, INPUT, DOWN);
616 PIN_SLP(gpm2-4, INPUT, DOWN);
618 PIN_SLP(gpm3-0, INPUT, DOWN);
619 PIN_SLP(gpm3-1, INPUT, DOWN);
620 PIN_SLP(gpm3-2, INPUT, DOWN);
621 PIN_SLP(gpm3-3, INPUT, DOWN);
622 PIN_SLP(gpm3-4, INPUT, DOWN);
623 PIN_SLP(gpm3-5, INPUT, DOWN);
624 PIN_SLP(gpm3-6, INPUT, DOWN);
625 PIN_SLP(gpm3-7, INPUT, DOWN);
627 PIN_SLP(gpm4-0, INPUT, DOWN);
628 PIN_SLP(gpm4-1, INPUT, DOWN);
629 PIN_SLP(gpm4-2, INPUT, DOWN);
630 PIN_SLP(gpm4-3, INPUT, DOWN);
631 PIN_SLP(gpm4-4, INPUT, DOWN);
632 PIN_SLP(gpm4-5, INPUT, DOWN);
633 PIN_SLP(gpm4-6, INPUT, DOWN);
634 PIN_SLP(gpm4-7, INPUT, DOWN);