2 * Samsung's Exynos3250 based Rinato board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Rinato board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include <dt-bindings/input/input.h>
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/clock/samsung,s2mps11.h>
22 model = "Samsung Rinato board";
23 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
30 reg = <0x40000000 0x1ff00000>;
34 compatible = "samsung,secure-firmware";
35 reg = <0x0205F000 0x1000>;
39 compatible = "gpio-keys";
42 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_POWER>;
45 debounce-interval = <10>;
50 i2c_max77836: i2c-gpio-0 {
51 compatible = "i2c-gpio";
52 gpios = <&gpd0 2 0>, <&gpd0 3 0>;
56 max77836: subpmic@25 {
57 compatible = "maxim,max77836";
58 interrupt-parent = <&gpx1>;
64 compatible = "maxim,max77836-muic";
68 compatible = "maxim,max77836-regulator";
69 safeout_reg: SAFEOUT {
70 regulator-name = "SAFEOUT";
73 charger_reg: CHARGER {
74 regulator-name = "CHARGER";
75 regulator-min-microamp = <45000>;
76 regulator-max-microamp = <475000>;
81 regulator-name = "MOT_2.7V";
82 regulator-min-microvolt = <1100000>;
83 regulator-max-microvolt = <2700000>;
87 regulator-name = "UNUSED_LDO2";
88 regulator-min-microvolt = <800000>;
89 regulator-max-microvolt = <3950000>;
94 compatible = "maxim,max77836-charger";
96 maxim,constant-uvolt = <4350000>;
97 maxim,fast-charge-uamp = <225000>;
98 maxim,eoc-uamp = <7500>;
99 maxim,ovp-uvolt = <6500000>;
105 compatible = "regulator-haptic";
106 haptic-supply = <&motor_reg>;
107 min-microvolt = <1100000>;
108 max-microvolt = <2700000>;
113 vdd-supply = <&ldo3_reg>;
115 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
116 assigned-clock-rates = <6000000>;
119 compatible = "ntc,ncp15wb473";
120 pullup-uv = <1800000>;
121 pullup-ohm = <100000>;
122 pulldown-ohm = <100000>;
123 io-channels = <&adc 0>;
127 compatible = "ntc,ncp15wb473";
128 pullup-uv = <1800000>;
129 pullup-ohm = <100000>;
130 pulldown-ohm = <100000>;
131 io-channels = <&adc 1>;
136 cpu0-supply = <&buck2_reg>;
144 vusb_d-supply = <&ldo15_reg>;
145 vusb_a-supply = <&ldo12_reg>;
146 dr_mode = "peripheral";
151 vddcore-supply = <&ldo6_reg>;
152 vddio-supply = <&ldo6_reg>;
153 samsung,pll-clock-frequency = <24000000>;
157 #address-cells = <1>;
164 remote-endpoint = <&dsi_in>;
165 samsung,burst-clock-frequency = <250000000>;
166 samsung,esc-clock-frequency = <20000000>;
172 compatible = "samsung,s6e63j0x03";
174 vdd3-supply = <&ldo16_reg>;
175 vci-supply = <&ldo20_reg>;
176 reset-gpios = <&gpe0 1 0>;
177 te-gpios = <&gpx0 6 0>;
178 power-on-delay= <30>;
179 power-off-delay= <120>;
184 panel-width-mm = <29>;
185 panel-height-mm = <29>;
189 clock-frequency = <0>;
195 vfront-porch = <150>;
203 remote-endpoint = <&dsi_out>;
221 #address-cells = <1>;
223 samsung,i2c-sda-delay = <100>;
224 samsung,i2c-slave-addr = <0x10>;
225 samsung,i2c-max-bus-freq = <100000>;
229 compatible = "samsung,s2mps14-pmic";
230 interrupt-parent = <&gpx0>;
235 s2mps14_osc: clocks {
236 compatible = "samsung,s2mps14-clk";
238 clock-output-names = "s2mps14_ap", "unused",
244 regulator-name = "VAP_ALIVE_1.0V";
245 regulator-min-microvolt = <1000000>;
246 regulator-max-microvolt = <1000000>;
249 regulator-state-mem {
250 regulator-on-in-suspend;
255 regulator-name = "VAP_M1_1.2V";
256 regulator-min-microvolt = <1200000>;
257 regulator-max-microvolt = <1200000>;
260 regulator-state-mem {
261 regulator-off-in-suspend;
266 regulator-name = "VCC_AP_1.8V";
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
271 regulator-state-mem {
272 regulator-off-in-suspend;
277 regulator-name = "VAP_AVDD_PLL1";
278 regulator-min-microvolt = <1800000>;
279 regulator-max-microvolt = <1800000>;
282 regulator-state-mem {
283 regulator-off-in-suspend;
288 regulator-name = "VAP_PLL_ISO_1.0V";
289 regulator-min-microvolt = <1000000>;
290 regulator-max-microvolt = <1000000>;
293 regulator-state-mem {
294 regulator-off-in-suspend;
299 regulator-name = "VAP_VMIPI_1.0V";
300 regulator-min-microvolt = <1000000>;
301 regulator-max-microvolt = <1000000>;
304 regulator-state-mem {
305 regulator-off-in-suspend;
310 regulator-name = "VAP_AVDD_1.8V";
311 regulator-min-microvolt = <1800000>;
312 regulator-max-microvolt = <1800000>;
315 regulator-state-mem {
316 regulator-off-in-suspend;
321 regulator-name = "VAP_USB_3.0V";
322 regulator-min-microvolt = <3000000>;
323 regulator-max-microvolt = <3000000>;
326 regulator-state-mem {
327 regulator-off-in-suspend;
332 regulator-name = "V_LPDDR_1.2V";
333 regulator-min-microvolt = <1200000>;
334 regulator-max-microvolt = <1200000>;
337 regulator-state-mem {
338 regulator-on-in-suspend;
343 regulator-name = "UNUSED_LDO10";
344 regulator-min-microvolt = <1000000>;
345 regulator-max-microvolt = <1000000>;
347 regulator-state-mem {
348 regulator-off-in-suspend;
353 regulator-name = "V_EMMC_1.8V";
354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvolt = <1800000>;
356 samsung,ext-control-gpios = <&gpk0 2 0>;
360 regulator-name = "V_EMMC_2.8V";
361 regulator-min-microvolt = <2800000>;
362 regulator-max-microvolt = <2800000>;
363 samsung,ext-control-gpios = <&gpk0 2 0>;
367 regulator-name = "CAM_AVDD_2.8V";
368 regulator-min-microvolt = <2800000>;
369 regulator-max-microvolt = <2800000>;
371 regulator-state-mem {
372 regulator-off-in-suspend;
377 regulator-name = "UNUSED_LDO14";
378 regulator-min-microvolt = <2700000>;
379 regulator-max-microvolt = <2700000>;
381 regulator-state-mem {
382 regulator-off-in-suspend;
387 regulator-name = "TSP_AVDD_3.3V";
388 regulator-min-microvolt = <3300000>;
389 regulator-max-microvolt = <3300000>;
391 regulator-state-mem {
392 regulator-off-in-suspend;
397 regulator-name = "LCD_VDD_3.3V";
398 regulator-min-microvolt = <3300000>;
399 regulator-max-microvolt = <3300000>;
401 regulator-state-mem {
402 regulator-off-in-suspend;
407 regulator-name = "V_IRLED_3.3V";
408 regulator-min-microvolt = <3300000>;
409 regulator-max-microvolt = <3300000>;
411 regulator-state-mem {
412 regulator-off-in-suspend;
417 regulator-name = "CAM_AF_2.8V";
418 regulator-min-microvolt = <2800000>;
419 regulator-max-microvolt = <2800000>;
421 regulator-state-mem {
422 regulator-off-in-suspend;
427 regulator-name = "TSP_VDD_1.8V";
428 regulator-min-microvolt = <1800000>;
429 regulator-max-microvolt = <1800000>;
431 regulator-state-mem {
432 regulator-off-in-suspend;
437 regulator-name = "LCD_VDD_1.8V";
438 regulator-min-microvolt = <1800000>;
439 regulator-max-microvolt = <1800000>;
441 regulator-state-mem {
442 regulator-off-in-suspend;
447 regulator-name = "CAM_IO_1.8V";
448 regulator-min-microvolt = <1800000>;
449 regulator-max-microvolt = <1800000>;
451 regulator-state-mem {
452 regulator-off-in-suspend;
457 regulator-name = "CAM_DVDD_1.2V";
458 regulator-min-microvolt = <1200000>;
459 regulator-max-microvolt = <1200000>;
461 regulator-state-mem {
462 regulator-off-in-suspend;
467 regulator-name = "HRM_VCC_1.8V";
468 regulator-min-microvolt = <1800000>;
469 regulator-max-microvolt = <1800000>;
474 regulator-name = "HRM_VCC_3.3V";
475 regulator-min-microvolt = <3000000>;
476 regulator-max-microvolt = <3000000>;
478 regulator-state-mem {
479 regulator-off-in-suspend;
484 regulator-name = "UNUSED_LDO25";
485 regulator-min-microvolt = <3000000>;
486 regulator-max-microvolt = <3000000>;
488 regulator-state-mem {
489 regulator-off-in-suspend;
494 regulator-name = "VAP_MIF_1.0V";
495 regulator-min-microvolt = <800000>;
496 regulator-max-microvolt = <900000>;
499 regulator-state-mem {
500 regulator-off-in-suspend;
505 regulator-name = "VAP_ARM_1.0V";
506 regulator-min-microvolt = <850000>;
507 regulator-max-microvolt = <1150000>;
510 regulator-state-mem {
511 regulator-off-in-suspend;
516 regulator-name = "VAP_INT3D_1.0V";
517 regulator-min-microvolt = <850000>;
518 regulator-max-microvolt = <1000000>;
521 regulator-state-mem {
522 regulator-off-in-suspend;
527 regulator-name = "VCC_SUB_1.95V";
528 regulator-min-microvolt = <1950000>;
529 regulator-max-microvolt = <1950000>;
532 regulator-state-mem {
533 regulator-on-in-suspend;
538 regulator-name = "VCC_SUB_1.35V";
539 regulator-min-microvolt = <1350000>;
540 regulator-max-microvolt = <1350000>;
543 regulator-state-mem {
544 regulator-on-in-suspend;
552 #address-cells = <1>;
554 samsung,i2c-sda-delay = <100>;
555 samsung,i2c-slave-addr = <0x10>;
556 samsung,i2c-max-bus-freq = <400000>;
560 compatible = "maxim,max77836-battery";
561 interrupt-parent = <&gpx1>;
580 #address-cells = <1>;
588 card-detect-delay = <200>;
589 vmmc-supply = <&ldo12_reg>;
590 clock-frequency = <100000000>;
591 clock-freq-min-max = <400000 100000000>;
592 samsung,dw-mshc-ciu-div = <1>;
593 samsung,dw-mshc-sdr-timing = <0 1>;
594 samsung,dw-mshc-ddr-timing = <1 2>;
595 pinctrl-names = "default";
596 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
602 assigned-clocks = <&cmu CLK_SCLK_UART0>;
603 assigned-clock-rates = <100000000>;
612 vtmu-supply = <&ldo7_reg>;
617 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
618 clock-names = "rtc", "rtc_src";
626 ppmu_dmc0_3: ppmu-event3-dmc0 {
627 event-name = "ppmu-event3-dmc0";
636 ppmu_dmc1_3: ppmu-event3-dmc1 {
637 event-name = "ppmu-event3-dmc1";
646 ppmu_leftbus_3: ppmu-event3-leftbus {
647 event-name = "ppmu-event3-leftbus";
656 ppmu_rightbus_3: ppmu-event3-rightbus {
657 event-name = "ppmu-event3-rightbus";
663 clock-frequency = <24000000>;
667 pinctrl-names = "default";
668 pinctrl-0 = <&sleep0>;
670 sleep0: sleep-state {
671 PIN_SLP(gpa0-0, INPUT, DOWN);
672 PIN_SLP(gpa0-1, INPUT, DOWN);
673 PIN_SLP(gpa0-2, INPUT, DOWN);
674 PIN_SLP(gpa0-3, INPUT, DOWN);
675 PIN_SLP(gpa0-4, INPUT, DOWN);
676 PIN_SLP(gpa0-5, INPUT, DOWN);
677 PIN_SLP(gpa0-6, INPUT, DOWN);
678 PIN_SLP(gpa0-7, INPUT, DOWN);
680 PIN_SLP(gpa1-0, INPUT, DOWN);
681 PIN_SLP(gpa1-1, INPUT, DOWN);
682 PIN_SLP(gpa1-2, INPUT, DOWN);
683 PIN_SLP(gpa1-3, INPUT, DOWN);
684 PIN_SLP(gpa1-4, INPUT, DOWN);
685 PIN_SLP(gpa1-5, INPUT, DOWN);
687 PIN_SLP(gpb-0, PREV, NONE);
688 PIN_SLP(gpb-1, PREV, NONE);
689 PIN_SLP(gpb-2, PREV, NONE);
690 PIN_SLP(gpb-3, PREV, NONE);
691 PIN_SLP(gpb-4, INPUT, DOWN);
692 PIN_SLP(gpb-5, INPUT, DOWN);
693 PIN_SLP(gpb-6, INPUT, DOWN);
694 PIN_SLP(gpb-7, INPUT, DOWN);
696 PIN_SLP(gpc0-0, INPUT, DOWN);
697 PIN_SLP(gpc0-1, INPUT, DOWN);
698 PIN_SLP(gpc0-2, INPUT, DOWN);
699 PIN_SLP(gpc0-3, INPUT, DOWN);
700 PIN_SLP(gpc0-4, INPUT, DOWN);
702 PIN_SLP(gpc1-0, INPUT, DOWN);
703 PIN_SLP(gpc1-1, INPUT, DOWN);
704 PIN_SLP(gpc1-2, INPUT, DOWN);
705 PIN_SLP(gpc1-3, INPUT, DOWN);
706 PIN_SLP(gpc1-4, INPUT, DOWN);
708 PIN_SLP(gpd0-0, INPUT, DOWN);
709 PIN_SLP(gpd0-1, INPUT, DOWN);
710 PIN_SLP(gpd0-2, INPUT, NONE);
711 PIN_SLP(gpd0-3, INPUT, NONE);
713 PIN_SLP(gpd1-0, INPUT, NONE);
714 PIN_SLP(gpd1-1, INPUT, NONE);
715 PIN_SLP(gpd1-2, INPUT, NONE);
716 PIN_SLP(gpd1-3, INPUT, NONE);
721 pinctrl-names = "default";
722 pinctrl-0 = <&sleep1>;
724 sleep1: sleep-state {
725 PIN_SLP(gpe0-0, PREV, NONE);
726 PIN_SLP(gpe0-1, PREV, NONE);
727 PIN_SLP(gpe0-2, INPUT, DOWN);
728 PIN_SLP(gpe0-3, INPUT, UP);
729 PIN_SLP(gpe0-4, INPUT, DOWN);
730 PIN_SLP(gpe0-5, INPUT, DOWN);
731 PIN_SLP(gpe0-6, INPUT, DOWN);
732 PIN_SLP(gpe0-7, INPUT, DOWN);
734 PIN_SLP(gpe1-0, INPUT, DOWN);
735 PIN_SLP(gpe1-1, PREV, NONE);
736 PIN_SLP(gpe1-2, INPUT, DOWN);
737 PIN_SLP(gpe1-3, INPUT, DOWN);
738 PIN_SLP(gpe1-4, INPUT, DOWN);
739 PIN_SLP(gpe1-5, INPUT, DOWN);
740 PIN_SLP(gpe1-6, INPUT, DOWN);
741 PIN_SLP(gpe1-7, INPUT, NONE);
743 PIN_SLP(gpe2-0, INPUT, NONE);
744 PIN_SLP(gpe2-1, INPUT, NONE);
745 PIN_SLP(gpe2-2, INPUT, NONE);
747 PIN_SLP(gpk0-0, INPUT, DOWN);
748 PIN_SLP(gpk0-1, INPUT, DOWN);
749 PIN_SLP(gpk0-2, OUT0, NONE);
750 PIN_SLP(gpk0-3, INPUT, DOWN);
751 PIN_SLP(gpk0-4, INPUT, DOWN);
752 PIN_SLP(gpk0-5, INPUT, DOWN);
753 PIN_SLP(gpk0-6, INPUT, DOWN);
754 PIN_SLP(gpk0-7, INPUT, DOWN);
756 PIN_SLP(gpk1-0, INPUT, DOWN);
757 PIN_SLP(gpk1-1, INPUT, DOWN);
758 PIN_SLP(gpk1-2, INPUT, DOWN);
759 PIN_SLP(gpk1-3, INPUT, DOWN);
760 PIN_SLP(gpk1-4, INPUT, DOWN);
761 PIN_SLP(gpk1-5, INPUT, DOWN);
762 PIN_SLP(gpk1-6, INPUT, DOWN);
764 PIN_SLP(gpk2-0, INPUT, DOWN);
765 PIN_SLP(gpk2-1, INPUT, DOWN);
766 PIN_SLP(gpk2-2, INPUT, DOWN);
767 PIN_SLP(gpk2-3, INPUT, DOWN);
768 PIN_SLP(gpk2-4, INPUT, DOWN);
769 PIN_SLP(gpk2-5, INPUT, DOWN);
770 PIN_SLP(gpk2-6, INPUT, DOWN);
772 PIN_SLP(gpl0-0, INPUT, DOWN);
773 PIN_SLP(gpl0-1, INPUT, DOWN);
774 PIN_SLP(gpl0-2, INPUT, DOWN);
775 PIN_SLP(gpl0-3, INPUT, DOWN);
777 PIN_SLP(gpm0-0, INPUT, DOWN);
778 PIN_SLP(gpm0-1, INPUT, DOWN);
779 PIN_SLP(gpm0-2, INPUT, DOWN);
780 PIN_SLP(gpm0-3, INPUT, DOWN);
781 PIN_SLP(gpm0-4, INPUT, DOWN);
782 PIN_SLP(gpm0-5, INPUT, DOWN);
783 PIN_SLP(gpm0-6, INPUT, DOWN);
784 PIN_SLP(gpm0-7, INPUT, DOWN);
786 PIN_SLP(gpm1-0, INPUT, DOWN);
787 PIN_SLP(gpm1-1, INPUT, DOWN);
788 PIN_SLP(gpm1-2, INPUT, DOWN);
789 PIN_SLP(gpm1-3, INPUT, DOWN);
790 PIN_SLP(gpm1-4, INPUT, DOWN);
791 PIN_SLP(gpm1-5, INPUT, DOWN);
792 PIN_SLP(gpm1-6, INPUT, DOWN);
794 PIN_SLP(gpm2-0, INPUT, DOWN);
795 PIN_SLP(gpm2-1, INPUT, DOWN);
796 PIN_SLP(gpm2-2, INPUT, DOWN);
797 PIN_SLP(gpm2-3, INPUT, DOWN);
798 PIN_SLP(gpm2-4, INPUT, DOWN);
800 PIN_SLP(gpm3-0, INPUT, DOWN);
801 PIN_SLP(gpm3-1, INPUT, DOWN);
802 PIN_SLP(gpm3-2, INPUT, DOWN);
803 PIN_SLP(gpm3-3, INPUT, DOWN);
804 PIN_SLP(gpm3-4, INPUT, DOWN);
805 PIN_SLP(gpm3-5, INPUT, DOWN);
806 PIN_SLP(gpm3-6, INPUT, DOWN);
807 PIN_SLP(gpm3-7, INPUT, DOWN);
809 PIN_SLP(gpm4-0, INPUT, DOWN);
810 PIN_SLP(gpm4-1, INPUT, DOWN);
811 PIN_SLP(gpm4-2, INPUT, DOWN);
812 PIN_SLP(gpm4-3, INPUT, DOWN);
813 PIN_SLP(gpm4-4, INPUT, DOWN);
814 PIN_SLP(gpm4-5, INPUT, DOWN);
815 PIN_SLP(gpm4-6, INPUT, DOWN);
816 PIN_SLP(gpm4-7, INPUT, DOWN);