2 * Samsung's Exynos4412 based Trats 2 board device tree source
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Trats 2 board which is based on
8 * Samsung's Exynos4412 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos4412.dtsi"
17 #include <dt-bindings/gpio/gpio.h>
18 #include <dt-bindings/interrupt-controller/irq.h>
19 #include <dt-bindings/clock/maxim,max77686.h>
22 model = "Samsung Trats 2 based on Exynos4412";
23 compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
28 i2c11 = &i2c_max77693;
29 i2c12 = &i2c_max77693_fuel;
33 reg = <0x40000000 0x40000000>;
37 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
38 stdout-path = &serial_2;
42 compatible = "samsung,secure-firmware";
43 reg = <0x0204F000 0x1000>;
48 compatible = "samsung,clock-xxti", "fixed-clock";
49 clock-frequency = <0>;
53 compatible = "samsung,clock-xusbxti", "fixed-clock";
54 clock-frequency = <24000000>;
59 compatible = "simple-bus";
63 cam_io_reg: voltage-regulator-1 {
64 compatible = "regulator-fixed";
65 regulator-name = "CAM_SENSOR_A";
66 regulator-min-microvolt = <2800000>;
67 regulator-max-microvolt = <2800000>;
72 lcd_vdd3_reg: voltage-regulator-2 {
73 compatible = "regulator-fixed";
74 regulator-name = "LCD_VDD_2.2V";
75 regulator-min-microvolt = <2200000>;
76 regulator-max-microvolt = <2200000>;
81 cam_af_reg: voltage-regulator-3 {
82 compatible = "regulator-fixed";
83 regulator-name = "CAM_AF";
84 regulator-min-microvolt = <2800000>;
85 regulator-max-microvolt = <2800000>;
90 ps_als_reg: voltage-regulator-5 {
91 compatible = "regulator-fixed";
92 regulator-name = "LED_A_3.0V";
93 regulator-min-microvolt = <3000000>;
94 regulator-max-microvolt = <3000000>;
101 compatible = "gpio-keys";
106 label = "volume down";
107 debounce-interval = <10>;
114 debounce-interval = <10>;
121 debounce-interval = <10>;
129 debounce-inteval = <10>;
134 i2c_max77693: i2c-gpio-1 {
135 compatible = "i2c-gpio";
136 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
137 i2c-gpio,delay-us = <2>;
138 #address-cells = <1>;
143 compatible = "maxim,max77693";
144 interrupt-parent = <&gpx1>;
149 esafeout1_reg: ESAFEOUT1@1 {
150 regulator-name = "ESAFEOUT1";
152 esafeout2_reg: ESAFEOUT2@2 {
153 regulator-name = "ESAFEOUT2";
155 charger_reg: CHARGER@0 {
156 regulator-name = "CHARGER";
157 regulator-min-microamp = <60000>;
158 regulator-max-microamp = <2580000>;
163 compatible = "maxim,max77693-haptic";
164 haptic-supply = <&ldo26_reg>;
165 pwms = <&pwm 0 38022 0>;
169 compatible = "maxim,max77693-charger";
171 maxim,constant-microvolt = <4350000>;
172 maxim,min-system-microvolt = <3600000>;
173 maxim,thermal-regulation-celsius = <100>;
174 maxim,battery-overcurrent-microamp = <3500000>;
175 maxim,charge-input-threshold-microvolt = <4300000>;
180 i2c_max77693_fuel: i2c-gpio-3 {
181 compatible = "i2c-gpio";
182 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
183 i2c-gpio,delay-us = <2>;
184 #address-cells = <1>;
188 max77693-fuel-gauge@36 {
189 compatible = "maxim,max17047";
190 interrupt-parent = <&gpx2>;
191 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
194 maxim,over-heat-temp = <700>;
195 maxim,over-volt = <4500>;
199 i2c_ak8975: i2c-gpio-0 {
200 compatible = "i2c-gpio";
201 gpios = <&gpy2 4 0>, <&gpy2 5 0>;
202 i2c-gpio,delay-us = <2>;
203 #address-cells = <1>;
208 compatible = "asahi-kasei,ak8975";
214 i2c_cm36651: i2c-gpio-2 {
215 compatible = "i2c-gpio";
216 gpios = <&gpf0 0 1>, <&gpf0 1 1>;
217 i2c-gpio,delay-us = <2>;
218 #address-cells = <1>;
222 compatible = "capella,cm36651";
224 interrupt-parent = <&gpx0>;
226 vled-supply = <&ps_als_reg>;
231 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
232 pinctrl-names = "default";
234 assigned-clocks = <&clock CLK_MOUT_CAM0>,
235 <&clock CLK_MOUT_CAM1>;
236 assigned-clock-parents = <&clock CLK_XUSBXTI>,
237 <&clock CLK_XUSBXTI>;
243 compatible = "samsung,trats2-audio";
244 samsung,i2s-controller = <&i2s0>;
245 samsung,model = "Trats2";
246 samsung,audio-codec = <&wm1811>;
247 samsung,audio-routing =
255 compatible = "ntc,ncp15wb473";
256 pullup-uv = <1800000>; /* VCC_1.8V_AP */
257 pullup-ohm = <100000>; /* 100K */
258 pulldown-ohm = <100000>; /* 100K */
259 io-channels = <&adc 1>; /* AP temperature */
262 thermistor-battery@1 {
263 compatible = "ntc,ncp15wb473";
264 pullup-uv = <1800000>; /* VCC_1.8V_AP */
265 pullup-ohm = <100000>; /* 100K */
266 pulldown-ohm = <100000>; /* 100K */
267 io-channels = <&adc 2>; /* Battery temperature */
271 cpu_thermal: cpu-thermal {
274 /* Corresponds to 800MHz at freq_table */
275 cooling-device = <&cpu0 7 7>;
278 /* Corresponds to 200MHz at freq_table */
279 cooling-device = <&cpu0 13 13>;
287 vdd-supply = <&ldo3_reg>;
293 vddcore-supply = <&ldo8_reg>;
294 vddio-supply = <&ldo10_reg>;
295 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
296 <&clock CLK_SCLK_CSIS0>;
297 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
298 assigned-clock-rates = <0>, <176000000>;
300 /* Camera C (3) MIPI CSI-2 (CSIS0) */
304 remote-endpoint = <&s5c73m3_ep>;
305 data-lanes = <1 2 3 4>;
306 samsung,csis-hs-settle = <12>;
313 vddcore-supply = <&ldo8_reg>;
314 vddio-supply = <&ldo10_reg>;
315 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
316 <&clock CLK_SCLK_CSIS1>;
317 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
318 assigned-clock-rates = <0>, <176000000>;
320 /* Camera D (4) MIPI CSI-2 (CSIS1) */
324 remote-endpoint = <&is_s5k6a3_ep>;
326 samsung,csis-hs-settle = <18>;
333 vddcore-supply = <&ldo8_reg>;
334 vddio-supply = <&ldo10_reg>;
335 samsung,pll-clock-frequency = <24000000>;
339 #address-cells = <1>;
346 remote-endpoint = <&dsi_in>;
347 samsung,burst-clock-frequency = <500000000>;
348 samsung,esc-clock-frequency = <20000000>;
354 compatible = "samsung,s6e8aa0";
356 vdd3-supply = <&lcd_vdd3_reg>;
357 vci-supply = <&ldo25_reg>;
358 reset-gpios = <&gpy4 5 0>;
359 power-on-delay= <50>;
364 panel-width-mm = <58>;
365 panel-height-mm = <103>;
369 clock-frequency = <57153600>;
383 remote-endpoint = <&dsi_out>;
395 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
396 <&clock CLK_SCLK_FIMC0>;
397 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
398 assigned-clock-rates = <0>, <176000000>;
403 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
404 <&clock CLK_SCLK_FIMC1>;
405 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
406 assigned-clock-rates = <0>, <176000000>;
411 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
412 <&clock CLK_SCLK_FIMC2>;
413 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
414 assigned-clock-rates = <0>, <176000000>;
419 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
420 <&clock CLK_SCLK_FIMC3>;
421 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
422 assigned-clock-rates = <0>, <176000000>;
426 pinctrl-0 = <&fimc_is_uart>;
427 pinctrl-names = "default";
430 i2c1_isp: i2c-isp@12140000 {
431 pinctrl-0 = <&fimc_is_i2c1>;
432 pinctrl-names = "default";
435 compatible = "samsung,s5k6a3";
437 svdda-supply = <&cam_io_reg>;
438 svddio-supply = <&ldo19_reg>;
439 afvdd-supply = <&ldo19_reg>;
440 clock-frequency = <24000000>;
442 clocks = <&camera 1>;
443 clock-names = "extclk";
444 samsung,camclk-out = <1>;
448 is_s5k6a3_ep: endpoint {
449 remote-endpoint = <&csis1_ep>;
470 vusb_d-supply = <&ldo15_reg>;
471 vusb_a-supply = <&ldo12_reg>;
472 dr_mode = "peripheral";
477 samsung,i2c-sda-delay = <100>;
478 samsung,i2c-slave-addr = <0x10>;
479 samsung,i2c-max-bus-freq = <400000>;
480 pinctrl-0 = <&i2c0_bus>;
481 pinctrl-names = "default";
485 compatible = "samsung,s5c73m3";
487 standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
488 xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
489 vdd-int-supply = <&buck9_reg>;
490 vddio-cis-supply = <&ldo9_reg>;
491 vdda-supply = <&ldo17_reg>;
492 vddio-host-supply = <&ldo18_reg>;
493 vdd-af-supply = <&cam_af_reg>;
494 vdd-reg-supply = <&cam_io_reg>;
495 clock-frequency = <24000000>;
497 clocks = <&camera 0>;
498 clock-names = "cis_extclk";
500 s5c73m3_ep: endpoint {
501 remote-endpoint = <&csis0_ep>;
502 data-lanes = <1 2 3 4>;
509 samsung,i2c-sda-delay = <100>;
510 samsung,i2c-slave-addr = <0x10>;
511 samsung,i2c-max-bus-freq = <400000>;
512 pinctrl-0 = <&i2c3_bus>;
513 pinctrl-names = "default";
516 mms114-touchscreen@48 {
517 compatible = "melfas,mms114";
519 interrupt-parent = <&gpm2>;
523 avdd-supply = <&ldo23_reg>;
524 vdd-supply = <&ldo24_reg>;
529 samsung,i2c-sda-delay = <100>;
530 samsung,i2c-slave-addr = <0x10>;
531 samsung,i2c-max-bus-freq = <100000>;
532 pinctrl-0 = <&i2c4_bus>;
533 pinctrl-names = "default";
537 compatible = "wlf,wm1811";
539 clocks = <&pmu_system_controller 0>;
540 clock-names = "MCLK1";
541 DCVDD-supply = <&ldo3_reg>;
542 DBVDD1-supply = <&ldo3_reg>;
543 wlf,ldo1ena = <&gpj0 4 0>;
548 samsung,i2c-sda-delay = <100>;
549 samsung,i2c-slave-addr = <0x10>;
550 samsung,i2c-max-bus-freq = <100000>;
551 pinctrl-0 = <&i2c7_bus>;
552 pinctrl-names = "default";
555 max77686: max77686_pmic@09 {
556 compatible = "maxim,max77686";
557 interrupt-parent = <&gpx0>;
564 regulator-compatible = "LDO1";
565 regulator-name = "VALIVE_1.0V_AP";
566 regulator-min-microvolt = <1000000>;
567 regulator-max-microvolt = <1000000>;
572 regulator-compatible = "LDO2";
573 regulator-name = "VM1M2_1.2V_AP";
574 regulator-min-microvolt = <1200000>;
575 regulator-max-microvolt = <1200000>;
577 regulator-state-mem {
578 regulator-on-in-suspend;
583 regulator-compatible = "LDO3";
584 regulator-name = "VCC_1.8V_AP";
585 regulator-min-microvolt = <1800000>;
586 regulator-max-microvolt = <1800000>;
591 regulator-compatible = "LDO4";
592 regulator-name = "VCC_2.8V_AP";
593 regulator-min-microvolt = <2800000>;
594 regulator-max-microvolt = <2800000>;
599 regulator-compatible = "LDO5";
600 regulator-name = "VCC_1.8V_IO";
601 regulator-min-microvolt = <1800000>;
602 regulator-max-microvolt = <1800000>;
607 regulator-compatible = "LDO6";
608 regulator-name = "VMPLL_1.0V_AP";
609 regulator-min-microvolt = <1000000>;
610 regulator-max-microvolt = <1000000>;
612 regulator-state-mem {
613 regulator-on-in-suspend;
618 regulator-compatible = "LDO7";
619 regulator-name = "VPLL_1.0V_AP";
620 regulator-min-microvolt = <1000000>;
621 regulator-max-microvolt = <1000000>;
623 regulator-state-mem {
624 regulator-on-in-suspend;
629 regulator-compatible = "LDO8";
630 regulator-name = "VMIPI_1.0V";
631 regulator-min-microvolt = <1000000>;
632 regulator-max-microvolt = <1000000>;
633 regulator-state-mem {
634 regulator-off-in-suspend;
639 regulator-compatible = "LDO9";
640 regulator-name = "CAM_ISP_MIPI_1.2V";
641 regulator-min-microvolt = <1200000>;
642 regulator-max-microvolt = <1200000>;
646 regulator-compatible = "LDO10";
647 regulator-name = "VMIPI_1.8V";
648 regulator-min-microvolt = <1800000>;
649 regulator-max-microvolt = <1800000>;
650 regulator-state-mem {
651 regulator-off-in-suspend;
656 regulator-compatible = "LDO11";
657 regulator-name = "VABB1_1.95V";
658 regulator-min-microvolt = <1950000>;
659 regulator-max-microvolt = <1950000>;
661 regulator-state-mem {
662 regulator-off-in-suspend;
667 regulator-compatible = "LDO12";
668 regulator-name = "VUOTG_3.0V";
669 regulator-min-microvolt = <3000000>;
670 regulator-max-microvolt = <3000000>;
671 regulator-state-mem {
672 regulator-off-in-suspend;
677 regulator-compatible = "LDO13";
678 regulator-name = "NFC_AVDD_1.8V";
679 regulator-min-microvolt = <1800000>;
680 regulator-max-microvolt = <1800000>;
684 regulator-compatible = "LDO14";
685 regulator-name = "VABB2_1.95V";
686 regulator-min-microvolt = <1950000>;
687 regulator-max-microvolt = <1950000>;
689 regulator-state-mem {
690 regulator-off-in-suspend;
695 regulator-compatible = "LDO15";
696 regulator-name = "VHSIC_1.0V";
697 regulator-min-microvolt = <1000000>;
698 regulator-max-microvolt = <1000000>;
699 regulator-state-mem {
700 regulator-on-in-suspend;
705 regulator-compatible = "LDO16";
706 regulator-name = "VHSIC_1.8V";
707 regulator-min-microvolt = <1800000>;
708 regulator-max-microvolt = <1800000>;
709 regulator-state-mem {
710 regulator-on-in-suspend;
715 regulator-compatible = "LDO17";
716 regulator-name = "CAM_SENSOR_CORE_1.2V";
717 regulator-min-microvolt = <1200000>;
718 regulator-max-microvolt = <1200000>;
722 regulator-compatible = "LDO18";
723 regulator-name = "CAM_ISP_SEN_IO_1.8V";
724 regulator-min-microvolt = <1800000>;
725 regulator-max-microvolt = <1800000>;
729 regulator-compatible = "LDO19";
730 regulator-name = "VT_CAM_1.8V";
731 regulator-min-microvolt = <1800000>;
732 regulator-max-microvolt = <1800000>;
736 regulator-compatible = "LDO20";
737 regulator-name = "VDDQ_PRE_1.8V";
738 regulator-min-microvolt = <1800000>;
739 regulator-max-microvolt = <1800000>;
743 regulator-compatible = "LDO21";
744 regulator-name = "VTF_2.8V";
745 regulator-min-microvolt = <2800000>;
746 regulator-max-microvolt = <2800000>;
747 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
751 regulator-compatible = "LDO22";
752 regulator-name = "VMEM_VDD_2.8V";
753 regulator-min-microvolt = <2800000>;
754 regulator-max-microvolt = <2800000>;
755 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
759 regulator-compatible = "LDO23";
760 regulator-name = "TSP_AVDD_3.3V";
761 regulator-min-microvolt = <3300000>;
762 regulator-max-microvolt = <3300000>;
766 regulator-compatible = "LDO24";
767 regulator-name = "TSP_VDD_1.8V";
768 regulator-min-microvolt = <1800000>;
769 regulator-max-microvolt = <1800000>;
773 regulator-compatible = "LDO25";
774 regulator-name = "LCD_VCC_3.3V";
775 regulator-min-microvolt = <2800000>;
776 regulator-max-microvolt = <2800000>;
780 regulator-compatible = "LDO26";
781 regulator-name = "MOTOR_VCC_3.0V";
782 regulator-min-microvolt = <3000000>;
783 regulator-max-microvolt = <3000000>;
787 regulator-compatible = "BUCK1";
788 regulator-name = "vdd_mif";
789 regulator-min-microvolt = <850000>;
790 regulator-max-microvolt = <1100000>;
793 regulator-state-mem {
794 regulator-off-in-suspend;
799 regulator-compatible = "BUCK2";
800 regulator-name = "vdd_arm";
801 regulator-min-microvolt = <850000>;
802 regulator-max-microvolt = <1500000>;
805 regulator-state-mem {
806 regulator-on-in-suspend;
811 regulator-compatible = "BUCK3";
812 regulator-name = "vdd_int";
813 regulator-min-microvolt = <850000>;
814 regulator-max-microvolt = <1150000>;
817 regulator-state-mem {
818 regulator-off-in-suspend;
823 regulator-compatible = "BUCK4";
824 regulator-name = "vdd_g3d";
825 regulator-min-microvolt = <850000>;
826 regulator-max-microvolt = <1150000>;
828 regulator-state-mem {
829 regulator-off-in-suspend;
834 regulator-compatible = "BUCK5";
835 regulator-name = "VMEM_1.2V_AP";
836 regulator-min-microvolt = <1200000>;
837 regulator-max-microvolt = <1200000>;
842 regulator-compatible = "BUCK6";
843 regulator-name = "VCC_SUB_1.35V";
844 regulator-min-microvolt = <1350000>;
845 regulator-max-microvolt = <1350000>;
850 regulator-compatible = "BUCK7";
851 regulator-name = "VCC_SUB_2.0V";
852 regulator-min-microvolt = <2000000>;
853 regulator-max-microvolt = <2000000>;
858 regulator-compatible = "BUCK8";
859 regulator-name = "VMEM_VDDF_3.0V";
860 regulator-min-microvolt = <2850000>;
861 regulator-max-microvolt = <2850000>;
862 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
866 regulator-compatible = "BUCK9";
867 regulator-name = "CAM_ISP_CORE_1.2V";
868 regulator-min-microvolt = <1000000>;
869 regulator-max-microvolt = <1200000>;
870 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
877 pinctrl-0 = <&i2s0_bus>;
878 pinctrl-names = "default";
886 card-detect-delay = <200>;
887 vmmc-supply = <&ldo22_reg>;
888 clock-frequency = <400000000>;
889 samsung,dw-mshc-ciu-div = <0>;
890 samsung,dw-mshc-sdr-timing = <2 3>;
891 samsung,dw-mshc-ddr-timing = <1 2>;
892 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
893 pinctrl-names = "default";
899 &pmu_system_controller {
900 assigned-clocks = <&pmu_system_controller 0>;
901 assigned-clock-parents = <&clock CLK_XUSBXTI>;
908 ppmu_dmc0_3: ppmu-event3-dmc0 {
909 event-name = "ppmu-event3-dmc0";
918 ppmu_dmc1_3: ppmu-event3-dmc1 {
919 event-name = "ppmu-event3-dmc1";
928 ppmu_leftbus_3: ppmu-event3-leftbus {
929 event-name = "ppmu-event3-leftbus";
938 ppmu_rightbus_3: ppmu-event3-rightbus {
939 event-name = "ppmu-event3-rightbus";
945 pinctrl-names = "default";
946 pinctrl-0 = <&sleep0>;
948 sleep0: sleep-states {
949 PIN_SLP(gpa0-0, INPUT, NONE);
950 PIN_SLP(gpa0-1, OUT0, NONE);
951 PIN_SLP(gpa0-2, INPUT, NONE);
952 PIN_SLP(gpa0-3, INPUT, UP);
953 PIN_SLP(gpa0-4, INPUT, NONE);
954 PIN_SLP(gpa0-5, INPUT, DOWN);
955 PIN_SLP(gpa0-6, INPUT, DOWN);
956 PIN_SLP(gpa0-7, INPUT, UP);
958 PIN_SLP(gpa1-0, INPUT, DOWN);
959 PIN_SLP(gpa1-1, INPUT, DOWN);
960 PIN_SLP(gpa1-2, INPUT, DOWN);
961 PIN_SLP(gpa1-3, INPUT, DOWN);
962 PIN_SLP(gpa1-4, INPUT, DOWN);
963 PIN_SLP(gpa1-5, INPUT, DOWN);
965 PIN_SLP(gpb-0, INPUT, NONE);
966 PIN_SLP(gpb-1, INPUT, NONE);
967 PIN_SLP(gpb-2, INPUT, NONE);
968 PIN_SLP(gpb-3, INPUT, NONE);
969 PIN_SLP(gpb-4, INPUT, DOWN);
970 PIN_SLP(gpb-5, INPUT, UP);
971 PIN_SLP(gpb-6, INPUT, DOWN);
972 PIN_SLP(gpb-7, INPUT, DOWN);
974 PIN_SLP(gpc0-0, INPUT, DOWN);
975 PIN_SLP(gpc0-1, INPUT, DOWN);
976 PIN_SLP(gpc0-2, INPUT, DOWN);
977 PIN_SLP(gpc0-3, INPUT, DOWN);
978 PIN_SLP(gpc0-4, INPUT, DOWN);
980 PIN_SLP(gpc1-0, INPUT, NONE);
981 PIN_SLP(gpc1-1, PREV, NONE);
982 PIN_SLP(gpc1-2, INPUT, NONE);
983 PIN_SLP(gpc1-3, INPUT, NONE);
984 PIN_SLP(gpc1-4, INPUT, NONE);
986 PIN_SLP(gpd0-0, INPUT, DOWN);
987 PIN_SLP(gpd0-1, INPUT, DOWN);
988 PIN_SLP(gpd0-2, INPUT, NONE);
989 PIN_SLP(gpd0-3, INPUT, NONE);
991 PIN_SLP(gpd1-0, INPUT, DOWN);
992 PIN_SLP(gpd1-1, INPUT, DOWN);
993 PIN_SLP(gpd1-2, INPUT, NONE);
994 PIN_SLP(gpd1-3, INPUT, NONE);
996 PIN_SLP(gpf0-0, INPUT, NONE);
997 PIN_SLP(gpf0-1, INPUT, NONE);
998 PIN_SLP(gpf0-2, INPUT, DOWN);
999 PIN_SLP(gpf0-3, INPUT, DOWN);
1000 PIN_SLP(gpf0-4, INPUT, NONE);
1001 PIN_SLP(gpf0-5, INPUT, DOWN);
1002 PIN_SLP(gpf0-6, INPUT, NONE);
1003 PIN_SLP(gpf0-7, INPUT, DOWN);
1005 PIN_SLP(gpf1-0, INPUT, DOWN);
1006 PIN_SLP(gpf1-1, INPUT, DOWN);
1007 PIN_SLP(gpf1-2, INPUT, DOWN);
1008 PIN_SLP(gpf1-3, INPUT, DOWN);
1009 PIN_SLP(gpf1-4, INPUT, NONE);
1010 PIN_SLP(gpf1-5, INPUT, NONE);
1011 PIN_SLP(gpf1-6, INPUT, DOWN);
1012 PIN_SLP(gpf1-7, PREV, NONE);
1014 PIN_SLP(gpf2-0, PREV, NONE);
1015 PIN_SLP(gpf2-1, INPUT, DOWN);
1016 PIN_SLP(gpf2-2, INPUT, DOWN);
1017 PIN_SLP(gpf2-3, INPUT, DOWN);
1018 PIN_SLP(gpf2-4, INPUT, DOWN);
1019 PIN_SLP(gpf2-5, INPUT, DOWN);
1020 PIN_SLP(gpf2-6, INPUT, NONE);
1021 PIN_SLP(gpf2-7, INPUT, NONE);
1023 PIN_SLP(gpf3-0, INPUT, NONE);
1024 PIN_SLP(gpf3-1, PREV, NONE);
1025 PIN_SLP(gpf3-2, PREV, NONE);
1026 PIN_SLP(gpf3-3, PREV, NONE);
1027 PIN_SLP(gpf3-4, OUT1, NONE);
1028 PIN_SLP(gpf3-5, INPUT, DOWN);
1030 PIN_SLP(gpj0-0, PREV, NONE);
1031 PIN_SLP(gpj0-1, PREV, NONE);
1032 PIN_SLP(gpj0-2, PREV, NONE);
1033 PIN_SLP(gpj0-3, INPUT, DOWN);
1034 PIN_SLP(gpj0-4, PREV, NONE);
1035 PIN_SLP(gpj0-5, PREV, NONE);
1036 PIN_SLP(gpj0-6, INPUT, DOWN);
1037 PIN_SLP(gpj0-7, INPUT, DOWN);
1039 PIN_SLP(gpj1-0, INPUT, DOWN);
1040 PIN_SLP(gpj1-1, PREV, NONE);
1041 PIN_SLP(gpj1-2, PREV, NONE);
1042 PIN_SLP(gpj1-3, INPUT, DOWN);
1043 PIN_SLP(gpj1-4, INPUT, DOWN);
1048 pinctrl-names = "default";
1049 pinctrl-0 = <&sleep1>;
1051 sleep1: sleep-states {
1052 PIN_SLP(gpk0-0, PREV, NONE);
1053 PIN_SLP(gpk0-1, PREV, NONE);
1054 PIN_SLP(gpk0-2, OUT0, NONE);
1055 PIN_SLP(gpk0-3, PREV, NONE);
1056 PIN_SLP(gpk0-4, PREV, NONE);
1057 PIN_SLP(gpk0-5, PREV, NONE);
1058 PIN_SLP(gpk0-6, PREV, NONE);
1060 PIN_SLP(gpk1-0, INPUT, DOWN);
1061 PIN_SLP(gpk1-1, INPUT, DOWN);
1062 PIN_SLP(gpk1-2, INPUT, DOWN);
1063 PIN_SLP(gpk1-3, PREV, NONE);
1064 PIN_SLP(gpk1-4, PREV, NONE);
1065 PIN_SLP(gpk1-5, PREV, NONE);
1066 PIN_SLP(gpk1-6, PREV, NONE);
1068 PIN_SLP(gpk2-0, INPUT, DOWN);
1069 PIN_SLP(gpk2-1, INPUT, DOWN);
1070 PIN_SLP(gpk2-2, INPUT, DOWN);
1071 PIN_SLP(gpk2-3, INPUT, DOWN);
1072 PIN_SLP(gpk2-4, INPUT, DOWN);
1073 PIN_SLP(gpk2-5, INPUT, DOWN);
1074 PIN_SLP(gpk2-6, INPUT, DOWN);
1076 PIN_SLP(gpk3-0, OUT0, NONE);
1077 PIN_SLP(gpk3-1, INPUT, NONE);
1078 PIN_SLP(gpk3-2, INPUT, DOWN);
1079 PIN_SLP(gpk3-3, INPUT, NONE);
1080 PIN_SLP(gpk3-4, INPUT, NONE);
1081 PIN_SLP(gpk3-5, INPUT, NONE);
1082 PIN_SLP(gpk3-6, INPUT, NONE);
1084 PIN_SLP(gpl0-0, INPUT, DOWN);
1085 PIN_SLP(gpl0-1, INPUT, DOWN);
1086 PIN_SLP(gpl0-2, INPUT, DOWN);
1087 PIN_SLP(gpl0-3, INPUT, DOWN);
1088 PIN_SLP(gpl0-4, PREV, NONE);
1089 PIN_SLP(gpl0-6, PREV, NONE);
1091 PIN_SLP(gpl1-0, INPUT, DOWN);
1092 PIN_SLP(gpl1-1, INPUT, DOWN);
1093 PIN_SLP(gpl2-0, INPUT, DOWN);
1094 PIN_SLP(gpl2-1, INPUT, DOWN);
1095 PIN_SLP(gpl2-2, INPUT, DOWN);
1096 PIN_SLP(gpl2-3, INPUT, DOWN);
1097 PIN_SLP(gpl2-4, INPUT, DOWN);
1098 PIN_SLP(gpl2-5, INPUT, DOWN);
1099 PIN_SLP(gpl2-6, PREV, NONE);
1100 PIN_SLP(gpl2-7, INPUT, DOWN);
1102 PIN_SLP(gpm0-0, INPUT, DOWN);
1103 PIN_SLP(gpm0-1, INPUT, DOWN);
1104 PIN_SLP(gpm0-2, INPUT, DOWN);
1105 PIN_SLP(gpm0-3, INPUT, DOWN);
1106 PIN_SLP(gpm0-4, INPUT, DOWN);
1107 PIN_SLP(gpm0-5, INPUT, DOWN);
1108 PIN_SLP(gpm0-6, INPUT, DOWN);
1109 PIN_SLP(gpm0-7, INPUT, DOWN);
1111 PIN_SLP(gpm1-0, INPUT, DOWN);
1112 PIN_SLP(gpm1-1, INPUT, DOWN);
1113 PIN_SLP(gpm1-2, INPUT, NONE);
1114 PIN_SLP(gpm1-3, INPUT, NONE);
1115 PIN_SLP(gpm1-4, INPUT, NONE);
1116 PIN_SLP(gpm1-5, INPUT, NONE);
1117 PIN_SLP(gpm1-6, INPUT, DOWN);
1119 PIN_SLP(gpm2-0, INPUT, NONE);
1120 PIN_SLP(gpm2-1, INPUT, NONE);
1121 PIN_SLP(gpm2-2, INPUT, DOWN);
1122 PIN_SLP(gpm2-3, INPUT, DOWN);
1123 PIN_SLP(gpm2-4, INPUT, DOWN);
1125 PIN_SLP(gpm3-0, PREV, NONE);
1126 PIN_SLP(gpm3-1, PREV, NONE);
1127 PIN_SLP(gpm3-2, PREV, NONE);
1128 PIN_SLP(gpm3-3, OUT1, NONE);
1129 PIN_SLP(gpm3-4, INPUT, DOWN);
1130 PIN_SLP(gpm3-5, INPUT, DOWN);
1131 PIN_SLP(gpm3-6, INPUT, DOWN);
1132 PIN_SLP(gpm3-7, INPUT, DOWN);
1134 PIN_SLP(gpm4-0, INPUT, DOWN);
1135 PIN_SLP(gpm4-1, INPUT, DOWN);
1136 PIN_SLP(gpm4-2, INPUT, DOWN);
1137 PIN_SLP(gpm4-3, INPUT, DOWN);
1138 PIN_SLP(gpm4-4, INPUT, DOWN);
1139 PIN_SLP(gpm4-5, INPUT, DOWN);
1140 PIN_SLP(gpm4-6, INPUT, DOWN);
1141 PIN_SLP(gpm4-7, INPUT, DOWN);
1143 PIN_SLP(gpy0-0, INPUT, DOWN);
1144 PIN_SLP(gpy0-1, INPUT, DOWN);
1145 PIN_SLP(gpy0-2, INPUT, DOWN);
1146 PIN_SLP(gpy0-3, INPUT, DOWN);
1147 PIN_SLP(gpy0-4, INPUT, DOWN);
1148 PIN_SLP(gpy0-5, INPUT, DOWN);
1150 PIN_SLP(gpy1-0, INPUT, DOWN);
1151 PIN_SLP(gpy1-1, INPUT, DOWN);
1152 PIN_SLP(gpy1-2, INPUT, DOWN);
1153 PIN_SLP(gpy1-3, INPUT, DOWN);
1155 PIN_SLP(gpy2-0, PREV, NONE);
1156 PIN_SLP(gpy2-1, INPUT, DOWN);
1157 PIN_SLP(gpy2-2, INPUT, NONE);
1158 PIN_SLP(gpy2-3, INPUT, NONE);
1159 PIN_SLP(gpy2-4, INPUT, NONE);
1160 PIN_SLP(gpy2-5, INPUT, NONE);
1162 PIN_SLP(gpy3-0, INPUT, DOWN);
1163 PIN_SLP(gpy3-1, INPUT, DOWN);
1164 PIN_SLP(gpy3-2, INPUT, DOWN);
1165 PIN_SLP(gpy3-3, INPUT, DOWN);
1166 PIN_SLP(gpy3-4, INPUT, DOWN);
1167 PIN_SLP(gpy3-5, INPUT, DOWN);
1168 PIN_SLP(gpy3-6, INPUT, DOWN);
1169 PIN_SLP(gpy3-7, INPUT, DOWN);
1171 PIN_SLP(gpy4-0, INPUT, DOWN);
1172 PIN_SLP(gpy4-1, INPUT, DOWN);
1173 PIN_SLP(gpy4-2, INPUT, DOWN);
1174 PIN_SLP(gpy4-3, INPUT, DOWN);
1175 PIN_SLP(gpy4-4, INPUT, DOWN);
1176 PIN_SLP(gpy4-5, INPUT, DOWN);
1177 PIN_SLP(gpy4-6, INPUT, DOWN);
1178 PIN_SLP(gpy4-7, INPUT, DOWN);
1180 PIN_SLP(gpy5-0, INPUT, DOWN);
1181 PIN_SLP(gpy5-1, INPUT, DOWN);
1182 PIN_SLP(gpy5-2, INPUT, DOWN);
1183 PIN_SLP(gpy5-3, INPUT, DOWN);
1184 PIN_SLP(gpy5-4, INPUT, DOWN);
1185 PIN_SLP(gpy5-5, INPUT, DOWN);
1186 PIN_SLP(gpy5-6, INPUT, DOWN);
1187 PIN_SLP(gpy5-7, INPUT, DOWN);
1189 PIN_SLP(gpy6-0, INPUT, DOWN);
1190 PIN_SLP(gpy6-1, INPUT, DOWN);
1191 PIN_SLP(gpy6-2, INPUT, DOWN);
1192 PIN_SLP(gpy6-3, INPUT, DOWN);
1193 PIN_SLP(gpy6-4, INPUT, DOWN);
1194 PIN_SLP(gpy6-5, INPUT, DOWN);
1195 PIN_SLP(gpy6-6, INPUT, DOWN);
1196 PIN_SLP(gpy6-7, INPUT, DOWN);
1201 pinctrl-names = "default";
1202 pinctrl-0 = <&sleep2>;
1204 sleep2: sleep-states {
1205 PIN_SLP(gpz-0, INPUT, DOWN);
1206 PIN_SLP(gpz-1, INPUT, DOWN);
1207 PIN_SLP(gpz-2, INPUT, DOWN);
1208 PIN_SLP(gpz-3, INPUT, DOWN);
1209 PIN_SLP(gpz-4, INPUT, DOWN);
1210 PIN_SLP(gpz-5, INPUT, DOWN);
1211 PIN_SLP(gpz-6, INPUT, DOWN);
1216 pinctrl-names = "default";
1217 pinctrl-0 = <&sleep3>;
1219 sleep3: sleep-states {
1220 PIN_SLP(gpv0-0, INPUT, DOWN);
1221 PIN_SLP(gpv0-1, INPUT, DOWN);
1222 PIN_SLP(gpv0-2, INPUT, DOWN);
1223 PIN_SLP(gpv0-3, INPUT, DOWN);
1224 PIN_SLP(gpv0-4, INPUT, DOWN);
1225 PIN_SLP(gpv0-5, INPUT, DOWN);
1226 PIN_SLP(gpv0-6, INPUT, DOWN);
1227 PIN_SLP(gpv0-7, INPUT, DOWN);
1229 PIN_SLP(gpv1-0, INPUT, DOWN);
1230 PIN_SLP(gpv1-1, INPUT, DOWN);
1231 PIN_SLP(gpv1-2, INPUT, DOWN);
1232 PIN_SLP(gpv1-3, INPUT, DOWN);
1233 PIN_SLP(gpv1-4, INPUT, DOWN);
1234 PIN_SLP(gpv1-5, INPUT, DOWN);
1235 PIN_SLP(gpv1-6, INPUT, DOWN);
1236 PIN_SLP(gpv1-7, INPUT, DOWN);
1238 PIN_SLP(gpv2-0, INPUT, DOWN);
1239 PIN_SLP(gpv2-1, INPUT, DOWN);
1240 PIN_SLP(gpv2-2, INPUT, DOWN);
1241 PIN_SLP(gpv2-3, INPUT, DOWN);
1242 PIN_SLP(gpv2-4, INPUT, DOWN);
1243 PIN_SLP(gpv2-5, INPUT, DOWN);
1244 PIN_SLP(gpv2-6, INPUT, DOWN);
1245 PIN_SLP(gpv2-7, INPUT, DOWN);
1247 PIN_SLP(gpv3-0, INPUT, DOWN);
1248 PIN_SLP(gpv3-1, INPUT, DOWN);
1249 PIN_SLP(gpv3-2, INPUT, DOWN);
1250 PIN_SLP(gpv3-3, INPUT, DOWN);
1251 PIN_SLP(gpv3-4, INPUT, DOWN);
1252 PIN_SLP(gpv3-5, INPUT, DOWN);
1253 PIN_SLP(gpv3-6, INPUT, DOWN);
1254 PIN_SLP(gpv3-7, INPUT, DOWN);
1256 PIN_SLP(gpv4-0, INPUT, DOWN);
1261 pinctrl-0 = <&pwm0_out>;
1262 pinctrl-names = "default";
1263 samsung,pwm-outputs = <0>;
1269 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1270 clock-names = "rtc", "rtc_src";
1275 cd-gpios = <&gpx3 4 0>;
1277 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1278 pinctrl-names = "default";
1279 vmmc-supply = <&ldo21_reg>;
1300 pinctrl-names = "default";
1301 pinctrl-0 = <&spi1_bus>;
1302 cs-gpios = <&gpb 5 0>;
1305 s5c73m3_spi: s5c73m3 {
1306 compatible = "samsung,s5c73m3";
1307 spi-max-frequency = <50000000>;
1310 samsung,spi-feedback-delay = <2>;
1316 vtmu-supply = <&ldo10_reg>;