2 * Copyright 2012 Free Electrons
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 /include/ "imx28.dtsi"
16 model = "Crystalfontz CFA-10036 Board";
17 compatible = "crystalfontz,cfa10036", "fsl,imx28";
20 reg = <0x40000000 0x08000000>;
26 pinctrl-names = "default";
27 pinctrl-0 = <&hog_pins_cfa10036>;
29 hog_pins_cfa10036: hog-10036@0 {
32 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
34 fsl,drive-strength = <0>;
39 led_pins_cfa10036: leds-10036@0 {
42 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
44 fsl,drive-strength = <0>;
49 usb0_otg_cfa10036: otg-10036@0 {
52 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
54 fsl,drive-strength = <0>;
62 compatible = "fsl,imx28-mmc";
63 pinctrl-names = "default";
64 pinctrl-0 = <&mmc0_4bit_pins_a
65 &mmc0_cd_cfg &mmc0_sck_cfg>;
72 duart: serial@80074000 {
73 pinctrl-names = "default";
74 pinctrl-0 = <&duart_pins_b>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&i2c0_pins_b>;
81 clock-frequency = <400000>;
85 compatible = "solomon,ssd1306fb-i2c";
87 reset-gpios = <&gpio2 7 0>;
88 solomon,height = <32>;
89 solomon,width = <128>;
90 solomon,page-offset = <0>;
94 usbphy0: usbphy@8007c000 {
102 pinctrl-names = "default";
103 pinctrl-0 = <&usb0_otg_cfa10036>;
109 compatible = "gpio-leds";
110 pinctrl-names = "default";
111 pinctrl-0 = <&led_pins_cfa10036>;
114 gpios = <&gpio3 4 1>;
115 default-state = "on";