2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
14 /include/ "imx53.dtsi"
17 model = "Freescale i.MX53 Quick Start Board";
18 compatible = "fsl,imx53-qsb", "fsl,imx53";
21 reg = <0x70000000 0x40000000>;
25 aips@50000000 { /* AIPS1 */
27 esdhc@50004000 { /* ESDHC1 */
28 pinctrl-names = "default";
29 pinctrl-0 = <&pinctrl_esdhc1_1>;
30 cd-gpios = <&gpio3 13 0>;
35 fsl,mode = "i2s-slave";
39 esdhc@50020000 { /* ESDHC3 */
40 pinctrl-names = "default";
41 pinctrl-0 = <&pinctrl_esdhc3_1>;
42 cd-gpios = <&gpio3 11 0>;
43 wp-gpios = <&gpio3 12 0>;
49 pinctrl-names = "default";
50 pinctrl-0 = <&pinctrl_hog>;
55 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
56 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
57 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
58 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
59 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
60 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
61 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
62 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
63 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
67 led_pin_gpio7_7: led_gpio7_7@0 {
69 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
76 uart1: serial@53fbc000 {
77 pinctrl-names = "default";
78 pinctrl-0 = <&pinctrl_uart1_1>;
83 aips@60000000 { /* AIPS2 */
84 i2c@63fc4000 { /* I2C2 */
85 pinctrl-names = "default";
86 pinctrl-0 = <&pinctrl_i2c2_1>;
90 compatible = "fsl,sgtl5000";
92 VDDA-supply = <®_3p2v>;
93 VDDIO-supply = <®_3p2v>;
97 i2c@63fc8000 { /* I2C1 */
98 pinctrl-names = "default";
99 pinctrl-0 = <&pinctrl_i2c1_1>;
102 accelerometer: mma8450@1c {
103 compatible = "fsl,mma8450";
108 compatible = "dlg,da9053-aa", "dlg,da9052";
110 interrupt-parent = <&gpio7>;
111 interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
115 regulator-min-microvolt = <500000>;
116 regulator-max-microvolt = <2075000>;
121 regulator-min-microvolt = <500000>;
122 regulator-max-microvolt = <2075000>;
127 regulator-min-microvolt = <925000>;
128 regulator-max-microvolt = <2500000>;
133 regulator-min-microvolt = <925000>;
134 regulator-max-microvolt = <2500000>;
139 regulator-min-microvolt = <600000>;
140 regulator-max-microvolt = <1800000>;
146 regulator-min-microvolt = <600000>;
147 regulator-max-microvolt = <1800000>;
152 regulator-min-microvolt = <600000>;
153 regulator-max-microvolt = <1800000>;
158 regulator-min-microvolt = <1725000>;
159 regulator-max-microvolt = <3300000>;
164 regulator-min-microvolt = <1725000>;
165 regulator-max-microvolt = <3300000>;
170 regulator-min-microvolt = <1200000>;
171 regulator-max-microvolt = <3600000>;
176 regulator-min-microvolt = <1200000>;
177 regulator-max-microvolt = <3600000>;
182 regulator-min-microvolt = <1200000>;
183 regulator-max-microvolt = <3600000>;
188 regulator-min-microvolt = <1200000>;
189 regulator-max-microvolt = <3600000>;
194 regulator-min-microvolt = <1250000>;
195 regulator-max-microvolt = <3650000>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_audmux_1>;
209 pinctrl-names = "default";
210 pinctrl-0 = <&pinctrl_fec_1>;
212 phy-reset-gpios = <&gpio7 6 0>;
219 compatible = "gpio-keys";
222 label = "Power Button";
223 gpios = <&gpio1 8 0>;
224 linux,code = <116>; /* KEY_POWER */
230 gpios = <&gpio2 14 0>;
231 linux,code = <115>; /* KEY_VOLUMEUP */
235 label = "Volume Down";
236 gpios = <&gpio2 15 0>;
237 linux,code = <114>; /* KEY_VOLUMEDOWN */
242 compatible = "gpio-leds";
243 pinctrl-names = "default";
244 pinctrl-0 = <&led_pin_gpio7_7>;
248 gpios = <&gpio7 7 0>;
249 linux,default-trigger = "heartbeat";
254 compatible = "simple-bus";
257 compatible = "regulator-fixed";
258 regulator-name = "3P2V";
259 regulator-min-microvolt = <3200000>;
260 regulator-max-microvolt = <3200000>;
266 compatible = "fsl,imx53-qsb-sgtl5000",
267 "fsl,imx-audio-sgtl5000";
268 model = "imx53-qsb-sgtl5000";
269 ssi-controller = <&ssi2>;
270 audio-codec = <&sgtl5000>;
272 "MIC_IN", "Mic Jack",
273 "Mic Jack", "Mic Bias",
274 "Headphone Jack", "HP_OUT";