2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
17 model = "Freescale i.MX53 Quick Start Board";
18 compatible = "fsl,imx53-qsb", "fsl,imx53";
21 reg = <0x70000000 0x40000000>;
25 compatible = "fsl,imx-parallel-display";
27 interface-pix-fmt = "rgb565";
28 pinctrl-names = "default";
29 pinctrl-0 = <&pinctrl_ipu_disp0_1>;
34 clock-frequency = <27000000>;
46 pixelclk-active = <0>;
52 compatible = "gpio-keys";
55 label = "Power Button";
57 linux,code = <116>; /* KEY_POWER */
63 gpios = <&gpio2 14 0>;
64 linux,code = <115>; /* KEY_VOLUMEUP */
68 label = "Volume Down";
69 gpios = <&gpio2 15 0>;
70 linux,code = <114>; /* KEY_VOLUMEDOWN */
75 compatible = "gpio-leds";
76 pinctrl-names = "default";
77 pinctrl-0 = <&led_pin_gpio7_7>;
82 linux,default-trigger = "heartbeat";
87 compatible = "simple-bus";
90 compatible = "regulator-fixed";
91 regulator-name = "3P2V";
92 regulator-min-microvolt = <3200000>;
93 regulator-max-microvolt = <3200000>;
99 compatible = "fsl,imx53-qsb-sgtl5000",
100 "fsl,imx-audio-sgtl5000";
101 model = "imx53-qsb-sgtl5000";
102 ssi-controller = <&ssi2>;
103 audio-codec = <&sgtl5000>;
105 "MIC_IN", "Mic Jack",
106 "Mic Jack", "Mic Bias",
107 "Headphone Jack", "HP_OUT";
114 pinctrl-names = "default";
115 pinctrl-0 = <&pinctrl_esdhc1_1>;
116 cd-gpios = <&gpio3 13 0>;
121 fsl,mode = "i2s-slave";
126 pinctrl-names = "default";
127 pinctrl-0 = <&pinctrl_esdhc3_1>;
128 cd-gpios = <&gpio3 11 0>;
129 wp-gpios = <&gpio3 12 0>;
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_hog>;
138 pinctrl_hog: hoggrp {
140 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
141 MX53_PAD_GPIO_8__GPIO1_8 0x80000000
142 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
143 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
144 MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
145 MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
146 MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
147 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
148 MX53_PAD_GPIO_16__GPIO7_11 0x80000000
152 led_pin_gpio7_7: led_gpio7_7@0 {
154 MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_uart1_1>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_i2c2_1>;
173 compatible = "fsl,sgtl5000";
175 VDDA-supply = <®_3p2v>;
176 VDDIO-supply = <®_3p2v>;
177 clocks = <&clks 150>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_i2c1_1>;
186 accelerometer: mma8450@1c {
187 compatible = "fsl,mma8450";
192 compatible = "dlg,da9053-aa", "dlg,da9052";
194 interrupt-parent = <&gpio7>;
195 interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
199 regulator-min-microvolt = <500000>;
200 regulator-max-microvolt = <2075000>;
205 regulator-min-microvolt = <500000>;
206 regulator-max-microvolt = <2075000>;
211 regulator-min-microvolt = <925000>;
212 regulator-max-microvolt = <2500000>;
217 regulator-min-microvolt = <925000>;
218 regulator-max-microvolt = <2500000>;
223 regulator-min-microvolt = <600000>;
224 regulator-max-microvolt = <1800000>;
230 regulator-min-microvolt = <600000>;
231 regulator-max-microvolt = <1800000>;
236 regulator-min-microvolt = <600000>;
237 regulator-max-microvolt = <1800000>;
242 regulator-min-microvolt = <1725000>;
243 regulator-max-microvolt = <3300000>;
248 regulator-min-microvolt = <1725000>;
249 regulator-max-microvolt = <3300000>;
254 regulator-min-microvolt = <1200000>;
255 regulator-max-microvolt = <3600000>;
260 regulator-min-microvolt = <1200000>;
261 regulator-max-microvolt = <3600000>;
266 regulator-min-microvolt = <1200000>;
267 regulator-max-microvolt = <3600000>;
272 regulator-min-microvolt = <1200000>;
273 regulator-max-microvolt = <3600000>;
278 regulator-min-microvolt = <1250000>;
279 regulator-max-microvolt = <3650000>;
287 pinctrl-names = "default";
288 pinctrl-0 = <&pinctrl_audmux_1>;
293 pinctrl-names = "default";
294 pinctrl-0 = <&pinctrl_fec_1>;
296 phy-reset-gpios = <&gpio7 6 0>;