2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
17 model = "Freescale i.MX6 Quad SABRE Lite Board";
18 compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
21 reg = <0x10000000 0x40000000>;
25 compatible = "simple-bus";
28 compatible = "regulator-fixed";
29 regulator-name = "2P5V";
30 regulator-min-microvolt = <2500000>;
31 regulator-max-microvolt = <2500000>;
36 compatible = "regulator-fixed";
37 regulator-name = "3P3V";
38 regulator-min-microvolt = <3300000>;
39 regulator-max-microvolt = <3300000>;
43 reg_usb_otg_vbus: usb_otg_vbus {
44 compatible = "regulator-fixed";
45 regulator-name = "usb_otg_vbus";
46 regulator-min-microvolt = <5000000>;
47 regulator-max-microvolt = <5000000>;
54 compatible = "fsl,imx6q-sabrelite-sgtl5000",
55 "fsl,imx-audio-sgtl5000";
56 model = "imx6q-sabrelite-sgtl5000";
57 ssi-controller = <&ssi1>;
58 audio-codec = <&codec>;
61 "Mic Jack", "Mic Bias",
62 "Headphone Jack", "HP_OUT";
73 fsl,spi-num-chipselects = <1>;
74 cs-gpios = <&gpio3 19 0>;
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_ecspi1_1>;
80 compatible = "sst,sst25vf016b";
81 spi-max-frequency = <20000000>;
87 fsl,mode = "i2s-slave";
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_hog>;
98 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
99 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
100 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
101 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
102 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
103 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
104 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
105 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
112 vbus-supply = <®_usb_otg_vbus>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_usbotg_1>;
115 disable-over-current;
124 pinctrl-names = "default";
125 pinctrl-0 = <&pinctrl_enet_1>;
127 phy-reset-gpios = <&gpio3 23 0>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&pinctrl_usdhc3_2>;
134 cd-gpios = <&gpio7 0 0>;
135 wp-gpios = <&gpio7 1 0>;
136 vmmc-supply = <®_3p3v>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_usdhc4_2>;
143 cd-gpios = <&gpio2 6 0>;
144 wp-gpios = <&gpio2 7 0>;
145 vmmc-supply = <®_3p3v>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_audmux_1>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_uart2_1>;
163 clock-frequency = <100000>;
164 pinctrl-names = "default";
165 pinctrl-0 = <&pinctrl_i2c1_1>;
168 compatible = "fsl,sgtl5000";
170 clocks = <&clks 201>;
171 VDDA-supply = <®_2p5v>;
172 VDDIO-supply = <®_3p3v>;