2 * Copyright 2012 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
15 reg = <0x10000000 0x40000000>;
19 compatible = "simple-bus";
21 reg_usb_otg_vbus: usb_otg_vbus {
22 compatible = "regulator-fixed";
23 regulator-name = "usb_otg_vbus";
24 regulator-min-microvolt = <5000000>;
25 regulator-max-microvolt = <5000000>;
30 reg_audio: wm8962_supply {
31 compatible = "regulator-fixed";
32 regulator-name = "wm8962-supply";
39 compatible = "gpio-keys";
44 linux,code = <115>; /* KEY_VOLUMEUP */
48 label = "Volume Down";
50 linux,code = <114>; /* KEY_VOLUMEDOWN */
55 compatible = "fsl,imx6q-sabresd-wm8962",
56 "fsl,imx-audio-wm8962";
57 model = "wm8962-audio";
58 ssi-controller = <&ssi2>;
59 audio-codec = <&codec>;
61 "Headphone Jack", "HPOUTL",
62 "Headphone Jack", "HPOUTR",
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_audmux_2>;
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_enet_1>;
88 clock-frequency = <100000>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_i2c1_2>;
94 compatible = "wlf,wm8962";
97 DCVDD-supply = <®_audio>;
98 DBVDD-supply = <®_audio>;
99 AVDD-supply = <®_audio>;
100 CPVDD-supply = <®_audio>;
101 MICVDD-supply = <®_audio>;
102 PLLVDD-supply = <®_audio>;
103 SPKVDD1-supply = <®_audio>;
104 SPKVDD2-supply = <®_audio>;
106 0x0000 /* 0:Default */
107 0x0000 /* 1:Default */
108 0x0013 /* 2:FN_DMICCLK */
109 0x0000 /* 3:Default */
110 0x8014 /* 4:FN_DMICCDAT */
111 0x0000 /* 5:Default */
117 fsl,mode = "i2s-slave";
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_uart1_1>;
132 vbus-supply = <®_usb_otg_vbus>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&pinctrl_usbotg_2>;
135 disable-over-current;
140 pinctrl-names = "default";
141 pinctrl-0 = <&pinctrl_usdhc2_1>;
142 cd-gpios = <&gpio2 2 0>;
143 wp-gpios = <&gpio2 3 0>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&pinctrl_usdhc3_1>;
150 cd-gpios = <&gpio2 0 0>;
151 wp-gpios = <&gpio2 1 0>;