3 #include "kirkwood.dtsi"
4 #include "kirkwood-6281.dtsi"
7 model = "Seagate GoFlex Net";
8 compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
11 device_type = "memory";
12 reg = <0x00000000 0x8000000>;
16 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
20 pinctrl: pinctrl@10000 {
21 pmx_usb_power_enable: pmx-usb-power-enable {
22 marvell,pins = "mpp29";
23 marvell,function = "gpio";
25 pmx_led_right_cap_0: pmx-led_right_cap_0 {
26 marvell,pins = "mpp38";
27 marvell,function = "gpio";
29 pmx_led_right_cap_1: pmx-led_right_cap_1 {
30 marvell,pins = "mpp39";
31 marvell,function = "gpio";
33 pmx_led_right_cap_2: pmx-led_right_cap_2 {
34 marvell,pins = "mpp40";
35 marvell,function = "gpio";
37 pmx_led_right_cap_3: pmx-led_right_cap_3 {
38 marvell,pins = "mpp41";
39 marvell,function = "gpio";
41 pmx_led_left_cap_0: pmx-led_left_cap_0 {
42 marvell,pins = "mpp42";
43 marvell,function = "gpio";
45 pmx_led_left_cap_1: pmx-led_left_cap_1 {
46 marvell,pins = "mpp43";
47 marvell,function = "gpio";
49 pmx_led_left_cap_2: pmx-led_left_cap_2 {
50 marvell,pins = "mpp44";
51 marvell,function = "gpio";
53 pmx_led_left_cap_3: pmx-led_left_cap_3 {
54 marvell,pins = "mpp45";
55 marvell,function = "gpio";
57 pmx_led_green: pmx-led_green {
58 marvell,pins = "mpp46";
59 marvell,function = "gpio";
61 pmx_led_orange: pmx-led_orange {
62 marvell,pins = "mpp47";
63 marvell,function = "gpio";
76 reg = <0x0000000 0x100000>;
82 reg = <0x0100000 0x400000>;
87 reg = <0x0500000 0x2000000>;
92 reg = <0x02500000 0xd800000>;
102 compatible = "gpio-leds";
103 pinctrl-0 = < &pmx_led_orange
104 &pmx_led_left_cap_0 &pmx_led_left_cap_1
105 &pmx_led_left_cap_2 &pmx_led_left_cap_3
106 &pmx_led_right_cap_0 &pmx_led_right_cap_1
107 &pmx_led_right_cap_2 &pmx_led_right_cap_3
109 pinctrl-names = "default";
112 label = "status:green:health";
113 gpios = <&gpio1 14 1>;
114 linux,default-trigger = "default-on";
117 label = "status:orange:fault";
118 gpios = <&gpio1 15 1>;
121 label = "status:white:left0";
122 gpios = <&gpio1 10 0>;
125 label = "status:white:left1";
126 gpios = <&gpio1 11 0>;
129 label = "status:white:left2";
130 gpios = <&gpio1 12 0>;
133 label = "status:white:left3";
134 gpios = <&gpio1 13 0>;
137 label = "status:white:right0";
138 gpios = <&gpio1 6 0>;
141 label = "status:white:right1";
142 gpios = <&gpio1 7 0>;
145 label = "status:white:right2";
146 gpios = <&gpio1 8 0>;
149 label = "status:white:right3";
150 gpios = <&gpio1 9 0>;
154 compatible = "simple-bus";
155 #address-cells = <1>;
157 pinctrl-0 = <&pmx_usb_power_enable>;
158 pinctrl-names = "default";
160 usb_power: regulator@1 {
161 compatible = "regulator-fixed";
163 regulator-name = "USB Power";
164 regulator-min-microvolt = <5000000>;
165 regulator-max-microvolt = <5000000>;
169 gpio = <&gpio0 29 0>;
177 ethphy0: ethernet-phy@0 {
178 device_type = "ethernet-phy";
186 phy-handle = <ðphy0>;