2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "omap34xx.dtsi"
11 #include "omap-gpmc-smsc911x.dtsi"
14 model = "TI OMAP3430 LDP (Zoom1 Labrador)";
15 compatible = "ti,omap3-ldp", "ti,omap3";
18 device_type = "memory";
19 reg = <0x80000000 0x8000000>; /* 128 MB */
29 compatible = "gpio-keys";
30 pinctrl-names = "default";
31 pinctrl-0 = <&gpio_key_pins>;
35 gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
36 linux,code = <0x0107001c>; /* KEY_ENTER */
42 gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
43 linux,code = <0x0303003b>; /* KEY_F1 */
49 gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
50 linux,code = <0x0403003c>; /* KEY_F2 */
56 gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
57 linux,code = <0x0503003d>; /* KEY_F3 */
63 gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
64 linux,code = <0x0704003e>; /* KEY_F4 */
70 gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
71 linux,code = <0x04070069>; /* KEY_LEFT */
77 gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
78 linux,code = <0x0507006a>; /* KEY_RIGHT */
84 gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
85 linux,code = <0x06070067>; /* KEY_UP */
91 gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
92 linux,code = <0x0707006c>; /* KEY_DOWN */
99 ranges = <0 0 0x00000000 0x01000000>,
100 <1 0 0x08000000 0x01000000>;
103 linux,mtd-name= "micron,nand";
105 nand-bus-width = <16>;
106 ti,nand-ecc-opt = "bch8";
108 gpmc,sync-clk-ps = <0>;
110 gpmc,cs-rd-off-ns = <44>;
111 gpmc,cs-wr-off-ns = <44>;
112 gpmc,adv-on-ns = <6>;
113 gpmc,adv-rd-off-ns = <34>;
114 gpmc,adv-wr-off-ns = <44>;
115 gpmc,we-off-ns = <40>;
116 gpmc,oe-off-ns = <54>;
117 gpmc,access-ns = <64>;
118 gpmc,rd-cycle-ns = <82>;
119 gpmc,wr-cycle-ns = <82>;
120 gpmc,wr-access-ns = <40>;
121 gpmc,wr-data-mux-bus-ns = <0>;
123 #address-cells = <1>;
132 reg = <0x80000 0x140000>;
135 label = "Environment";
136 reg = <0x1c0000 0x40000>;
140 reg = <0x200000 0x1e00000>;
143 label = "Filesystem";
144 reg = <0x2000000 0xe000000>;
149 interrupt-parent = <&gpio5>;
150 interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
156 clock-frequency = <2600000>;
160 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
161 interrupt-parent = <&intc>;
165 #include "twl4030.dtsi"
166 #include "twl4030_omap3.dtsi"
169 clock-frequency = <400000>;
173 clock-frequency = <400000>;
177 vmmc-supply = <&vmmc1>;
182 gpio_key_pins: pinmux_gpio_key_pins {
183 pinctrl-single,pins = <
184 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
185 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
186 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
187 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
188 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
189 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
190 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
191 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
192 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
196 musb_pins: pinmux_musb_pins {
197 pinctrl-single,pins = <
198 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
199 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
200 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
201 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
202 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
203 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
204 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
205 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
206 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
207 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
208 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
209 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
215 pinctrl-names = "default";
216 pinctrl-0 = <&musb_pins>;
217 interface-type = <0>;
218 usb-phy = <&usb2_phy>;
224 /* Needed for ads7846 */
225 regulator-name = "vcc";
230 regulator-name = "vdds_dsi";