2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/pinctrl/omap.h>
13 #include "skeleton.dtsi"
16 compatible = "ti,omap4430", "ti,omap4";
17 interrupt-parent = <&wakeupgen>;
35 compatible = "arm,cortex-a9";
37 next-level-cache = <&L2>;
40 clocks = <&dpll_mpu_ck>;
43 clock-latency = <300000>; /* From omap-cpufreq driver */
46 compatible = "arm,cortex-a9";
48 next-level-cache = <&L2>;
53 gic: interrupt-controller@48241000 {
54 compatible = "arm,cortex-a9-gic";
56 #interrupt-cells = <3>;
57 reg = <0x48241000 0x1000>,
59 interrupt-parent = <&gic>;
62 L2: l2-cache-controller@48242000 {
63 compatible = "arm,pl310-cache";
64 reg = <0x48242000 0x1000>;
69 local-timer@48240600 {
70 compatible = "arm,cortex-a9-twd-timer";
71 clocks = <&mpu_periphclk>;
72 reg = <0x48240600 0x20>;
73 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
74 interrupt-parent = <&gic>;
77 wakeupgen: interrupt-controller@48281000 {
78 compatible = "ti,omap4-wugen-mpu";
80 #interrupt-cells = <3>;
81 reg = <0x48281000 0x1000>;
82 interrupt-parent = <&gic>;
86 * The soc node represents the soc top level view. It is used for IPs
87 * that are not memory mapped in the MPU view or for the MPU itself.
90 compatible = "ti,omap-infra";
92 compatible = "ti,omap4-mpu";
98 compatible = "ti,omap3-c64";
103 compatible = "ti,ivahd";
109 * XXX: Use a flat representation of the OMAP4 interconnect.
110 * The real OMAP interconnect network is quite complex.
111 * Since it will not bring real advantage to represent that in DT for
112 * the moment, just use a fake OCP bus entry to represent the whole bus
116 compatible = "ti,omap4-l3-noc", "simple-bus";
117 #address-cells = <1>;
120 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
121 reg = <0x44000000 0x1000>,
124 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
125 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
127 l4_cfg: l4@4a000000 {
128 compatible = "ti,omap4-l4-cfg", "simple-bus";
129 #address-cells = <1>;
131 ranges = <0 0x4a000000 0x1000000>;
134 compatible = "ti,omap4-cm1";
135 reg = <0x4000 0x2000>;
138 #address-cells = <1>;
142 cm1_clockdomains: clockdomains {
147 compatible = "ti,omap4-cm2";
148 reg = <0x8000 0x3000>;
151 #address-cells = <1>;
155 cm2_clockdomains: clockdomains {
159 omap4_scm_core: scm@2000 {
160 compatible = "ti,omap4-scm-core", "simple-bus";
161 reg = <0x2000 0x1000>;
162 #address-cells = <1>;
164 ranges = <0 0x2000 0x1000>;
166 scm_conf: scm_conf@0 {
167 compatible = "syscon";
169 #address-cells = <1>;
174 omap4_padconf_core: scm@100000 {
175 compatible = "ti,omap4-scm-padconf-core",
177 #address-cells = <1>;
179 ranges = <0 0x100000 0x1000>;
181 omap4_pmx_core: pinmux@40 {
182 compatible = "ti,omap4-padconf",
185 #address-cells = <1>;
187 #interrupt-cells = <1>;
188 interrupt-controller;
189 pinctrl-single,register-width = <16>;
190 pinctrl-single,function-mask = <0x7fff>;
193 omap4_padconf_global: omap4_padconf_global@5a0 {
194 compatible = "syscon";
196 #address-cells = <1>;
199 pbias_regulator: pbias_regulator {
200 compatible = "ti,pbias-omap";
202 syscon = <&omap4_padconf_global>;
203 pbias_mmc_reg: pbias_mmc_omap4 {
204 regulator-name = "pbias_mmc_omap4";
205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvolt = <3000000>;
213 compatible = "ti,omap4-l4-wkup", "simple-bus";
214 #address-cells = <1>;
216 ranges = <0 0x300000 0x40000>;
218 counter32k: counter@4000 {
219 compatible = "ti,omap-counter32k";
221 ti,hwmods = "counter_32k";
225 compatible = "ti,omap4-prm";
226 reg = <0x6000 0x3000>;
227 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
230 #address-cells = <1>;
234 prm_clockdomains: clockdomains {
239 compatible = "ti,omap4-scrm";
240 reg = <0xa000 0x2000>;
242 scrm_clocks: clocks {
243 #address-cells = <1>;
247 scrm_clockdomains: clockdomains {
251 omap4_pmx_wkup: pinmux@1e040 {
252 compatible = "ti,omap4-padconf",
254 reg = <0x1e040 0x0038>;
255 #address-cells = <1>;
257 #interrupt-cells = <1>;
258 interrupt-controller;
259 pinctrl-single,register-width = <16>;
260 pinctrl-single,function-mask = <0x7fff>;
265 ocmcram: ocmcram@40304000 {
266 compatible = "mmio-sram";
267 reg = <0x40304000 0xa000>; /* 40k */
270 sdma: dma-controller@4a056000 {
271 compatible = "ti,omap4430-sdma";
272 reg = <0x4a056000 0x1000>;
273 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
274 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
275 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
276 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
279 dma-requests = <127>;
282 gpio1: gpio@4a310000 {
283 compatible = "ti,omap4-gpio";
284 reg = <0x4a310000 0x200>;
285 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
290 interrupt-controller;
291 #interrupt-cells = <2>;
294 gpio2: gpio@48055000 {
295 compatible = "ti,omap4-gpio";
296 reg = <0x48055000 0x200>;
297 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
301 interrupt-controller;
302 #interrupt-cells = <2>;
305 gpio3: gpio@48057000 {
306 compatible = "ti,omap4-gpio";
307 reg = <0x48057000 0x200>;
308 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
312 interrupt-controller;
313 #interrupt-cells = <2>;
316 gpio4: gpio@48059000 {
317 compatible = "ti,omap4-gpio";
318 reg = <0x48059000 0x200>;
319 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
323 interrupt-controller;
324 #interrupt-cells = <2>;
327 gpio5: gpio@4805b000 {
328 compatible = "ti,omap4-gpio";
329 reg = <0x4805b000 0x200>;
330 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
334 interrupt-controller;
335 #interrupt-cells = <2>;
338 gpio6: gpio@4805d000 {
339 compatible = "ti,omap4-gpio";
340 reg = <0x4805d000 0x200>;
341 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
345 interrupt-controller;
346 #interrupt-cells = <2>;
349 gpmc: gpmc@50000000 {
350 compatible = "ti,omap4430-gpmc";
351 reg = <0x50000000 0x1000>;
352 #address-cells = <2>;
354 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
356 gpmc,num-waitpins = <4>;
359 clocks = <&l3_div_ck>;
363 uart1: serial@4806a000 {
364 compatible = "ti,omap4-uart";
365 reg = <0x4806a000 0x100>;
366 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
368 clock-frequency = <48000000>;
371 uart2: serial@4806c000 {
372 compatible = "ti,omap4-uart";
373 reg = <0x4806c000 0x100>;
374 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
376 clock-frequency = <48000000>;
379 uart3: serial@48020000 {
380 compatible = "ti,omap4-uart";
381 reg = <0x48020000 0x100>;
382 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
384 clock-frequency = <48000000>;
387 uart4: serial@4806e000 {
388 compatible = "ti,omap4-uart";
389 reg = <0x4806e000 0x100>;
390 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
392 clock-frequency = <48000000>;
395 hwspinlock: spinlock@4a0f6000 {
396 compatible = "ti,omap4-hwspinlock";
397 reg = <0x4a0f6000 0x1000>;
398 ti,hwmods = "spinlock";
403 compatible = "ti,omap4-i2c";
404 reg = <0x48070000 0x100>;
405 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
406 #address-cells = <1>;
412 compatible = "ti,omap4-i2c";
413 reg = <0x48072000 0x100>;
414 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
415 #address-cells = <1>;
421 compatible = "ti,omap4-i2c";
422 reg = <0x48060000 0x100>;
423 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
424 #address-cells = <1>;
430 compatible = "ti,omap4-i2c";
431 reg = <0x48350000 0x100>;
432 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
433 #address-cells = <1>;
438 mcspi1: spi@48098000 {
439 compatible = "ti,omap4-mcspi";
440 reg = <0x48098000 0x200>;
441 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
442 #address-cells = <1>;
444 ti,hwmods = "mcspi1";
454 dma-names = "tx0", "rx0", "tx1", "rx1",
455 "tx2", "rx2", "tx3", "rx3";
458 mcspi2: spi@4809a000 {
459 compatible = "ti,omap4-mcspi";
460 reg = <0x4809a000 0x200>;
461 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
462 #address-cells = <1>;
464 ti,hwmods = "mcspi2";
470 dma-names = "tx0", "rx0", "tx1", "rx1";
473 mcspi3: spi@480b8000 {
474 compatible = "ti,omap4-mcspi";
475 reg = <0x480b8000 0x200>;
476 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
477 #address-cells = <1>;
479 ti,hwmods = "mcspi3";
481 dmas = <&sdma 15>, <&sdma 16>;
482 dma-names = "tx0", "rx0";
485 mcspi4: spi@480ba000 {
486 compatible = "ti,omap4-mcspi";
487 reg = <0x480ba000 0x200>;
488 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
489 #address-cells = <1>;
491 ti,hwmods = "mcspi4";
493 dmas = <&sdma 70>, <&sdma 71>;
494 dma-names = "tx0", "rx0";
498 compatible = "ti,omap4-hsmmc";
499 reg = <0x4809c000 0x400>;
500 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
503 ti,needs-special-reset;
504 dmas = <&sdma 61>, <&sdma 62>;
505 dma-names = "tx", "rx";
506 pbias-supply = <&pbias_mmc_reg>;
510 compatible = "ti,omap4-hsmmc";
511 reg = <0x480b4000 0x400>;
512 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
514 ti,needs-special-reset;
515 dmas = <&sdma 47>, <&sdma 48>;
516 dma-names = "tx", "rx";
520 compatible = "ti,omap4-hsmmc";
521 reg = <0x480ad000 0x400>;
522 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
524 ti,needs-special-reset;
525 dmas = <&sdma 77>, <&sdma 78>;
526 dma-names = "tx", "rx";
530 compatible = "ti,omap4-hsmmc";
531 reg = <0x480d1000 0x400>;
532 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
534 ti,needs-special-reset;
535 dmas = <&sdma 57>, <&sdma 58>;
536 dma-names = "tx", "rx";
540 compatible = "ti,omap4-hsmmc";
541 reg = <0x480d5000 0x400>;
542 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
544 ti,needs-special-reset;
545 dmas = <&sdma 59>, <&sdma 60>;
546 dma-names = "tx", "rx";
549 mmu_dsp: mmu@4a066000 {
550 compatible = "ti,omap4-iommu";
551 reg = <0x4a066000 0x100>;
552 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
553 ti,hwmods = "mmu_dsp";
556 mmu_ipu: mmu@55082000 {
557 compatible = "ti,omap4-iommu";
558 reg = <0x55082000 0x100>;
559 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
560 ti,hwmods = "mmu_ipu";
561 ti,iommu-bus-err-back;
565 compatible = "ti,omap4-wdt", "ti,omap3-wdt";
566 reg = <0x4a314000 0x80>;
567 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
568 ti,hwmods = "wd_timer2";
571 mcpdm: mcpdm@40132000 {
572 compatible = "ti,omap4-mcpdm";
573 reg = <0x40132000 0x7f>, /* MPU private access */
574 <0x49032000 0x7f>; /* L3 Interconnect */
575 reg-names = "mpu", "dma";
576 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
580 dma-names = "up_link", "dn_link";
584 dmic: dmic@4012e000 {
585 compatible = "ti,omap4-dmic";
586 reg = <0x4012e000 0x7f>, /* MPU private access */
587 <0x4902e000 0x7f>; /* L3 Interconnect */
588 reg-names = "mpu", "dma";
589 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
592 dma-names = "up_link";
596 mcbsp1: mcbsp@40122000 {
597 compatible = "ti,omap4-mcbsp";
598 reg = <0x40122000 0xff>, /* MPU private access */
599 <0x49022000 0xff>; /* L3 Interconnect */
600 reg-names = "mpu", "dma";
601 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
602 interrupt-names = "common";
603 ti,buffer-size = <128>;
604 ti,hwmods = "mcbsp1";
607 dma-names = "tx", "rx";
611 mcbsp2: mcbsp@40124000 {
612 compatible = "ti,omap4-mcbsp";
613 reg = <0x40124000 0xff>, /* MPU private access */
614 <0x49024000 0xff>; /* L3 Interconnect */
615 reg-names = "mpu", "dma";
616 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
617 interrupt-names = "common";
618 ti,buffer-size = <128>;
619 ti,hwmods = "mcbsp2";
622 dma-names = "tx", "rx";
626 mcbsp3: mcbsp@40126000 {
627 compatible = "ti,omap4-mcbsp";
628 reg = <0x40126000 0xff>, /* MPU private access */
629 <0x49026000 0xff>; /* L3 Interconnect */
630 reg-names = "mpu", "dma";
631 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
632 interrupt-names = "common";
633 ti,buffer-size = <128>;
634 ti,hwmods = "mcbsp3";
637 dma-names = "tx", "rx";
641 mcbsp4: mcbsp@48096000 {
642 compatible = "ti,omap4-mcbsp";
643 reg = <0x48096000 0xff>; /* L4 Interconnect */
645 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
646 interrupt-names = "common";
647 ti,buffer-size = <128>;
648 ti,hwmods = "mcbsp4";
651 dma-names = "tx", "rx";
655 keypad: keypad@4a31c000 {
656 compatible = "ti,omap4-keypad";
657 reg = <0x4a31c000 0x80>;
658 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
664 compatible = "ti,omap4-dmm";
665 reg = <0x4e000000 0x800>;
666 interrupts = <0 113 0x4>;
670 emif1: emif@4c000000 {
671 compatible = "ti,emif-4d";
672 reg = <0x4c000000 0x100>;
673 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
677 hw-caps-read-idle-ctrl;
678 hw-caps-ll-interface;
682 emif2: emif@4d000000 {
683 compatible = "ti,emif-4d";
684 reg = <0x4d000000 0x100>;
685 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
689 hw-caps-read-idle-ctrl;
690 hw-caps-ll-interface;
695 compatible = "ti,omap-ocp2scp";
696 reg = <0x4a0ad000 0x1f>;
697 #address-cells = <1>;
700 ti,hwmods = "ocp2scp_usb_phy";
701 usb2_phy: usb2phy@4a0ad080 {
702 compatible = "ti,omap-usb2";
703 reg = <0x4a0ad080 0x58>;
704 ctrl-module = <&omap_control_usb2phy>;
705 clocks = <&usb_phy_cm_clk32k>;
706 clock-names = "wkupclk";
711 mailbox: mailbox@4a0f4000 {
712 compatible = "ti,omap4-mailbox";
713 reg = <0x4a0f4000 0x200>;
714 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
715 ti,hwmods = "mailbox";
717 ti,mbox-num-users = <3>;
718 ti,mbox-num-fifos = <8>;
720 ti,mbox-tx = <0 0 0>;
721 ti,mbox-rx = <1 0 0>;
724 ti,mbox-tx = <3 0 0>;
725 ti,mbox-rx = <2 0 0>;
729 timer1: timer@4a318000 {
730 compatible = "ti,omap3430-timer";
731 reg = <0x4a318000 0x80>;
732 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
733 ti,hwmods = "timer1";
737 timer2: timer@48032000 {
738 compatible = "ti,omap3430-timer";
739 reg = <0x48032000 0x80>;
740 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
741 ti,hwmods = "timer2";
744 timer3: timer@48034000 {
745 compatible = "ti,omap4430-timer";
746 reg = <0x48034000 0x80>;
747 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
748 ti,hwmods = "timer3";
751 timer4: timer@48036000 {
752 compatible = "ti,omap4430-timer";
753 reg = <0x48036000 0x80>;
754 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
755 ti,hwmods = "timer4";
758 timer5: timer@40138000 {
759 compatible = "ti,omap4430-timer";
760 reg = <0x40138000 0x80>,
762 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
763 ti,hwmods = "timer5";
767 timer6: timer@4013a000 {
768 compatible = "ti,omap4430-timer";
769 reg = <0x4013a000 0x80>,
771 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
772 ti,hwmods = "timer6";
776 timer7: timer@4013c000 {
777 compatible = "ti,omap4430-timer";
778 reg = <0x4013c000 0x80>,
780 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
781 ti,hwmods = "timer7";
785 timer8: timer@4013e000 {
786 compatible = "ti,omap4430-timer";
787 reg = <0x4013e000 0x80>,
789 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
790 ti,hwmods = "timer8";
795 timer9: timer@4803e000 {
796 compatible = "ti,omap4430-timer";
797 reg = <0x4803e000 0x80>;
798 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
799 ti,hwmods = "timer9";
803 timer10: timer@48086000 {
804 compatible = "ti,omap3430-timer";
805 reg = <0x48086000 0x80>;
806 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
807 ti,hwmods = "timer10";
811 timer11: timer@48088000 {
812 compatible = "ti,omap4430-timer";
813 reg = <0x48088000 0x80>;
814 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
815 ti,hwmods = "timer11";
819 usbhstll: usbhstll@4a062000 {
820 compatible = "ti,usbhs-tll";
821 reg = <0x4a062000 0x1000>;
822 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
823 ti,hwmods = "usb_tll_hs";
826 usbhshost: usbhshost@4a064000 {
827 compatible = "ti,usbhs-host";
828 reg = <0x4a064000 0x800>;
829 ti,hwmods = "usb_host_hs";
830 #address-cells = <1>;
833 clocks = <&init_60m_fclk>,
836 clock-names = "refclk_60m_int",
840 usbhsohci: ohci@4a064800 {
841 compatible = "ti,ohci-omap3";
842 reg = <0x4a064800 0x400>;
843 interrupt-parent = <&gic>;
844 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
847 usbhsehci: ehci@4a064c00 {
848 compatible = "ti,ehci-omap";
849 reg = <0x4a064c00 0x400>;
850 interrupt-parent = <&gic>;
851 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
855 omap_control_usb2phy: control-phy@4a002300 {
856 compatible = "ti,control-phy-usb2";
857 reg = <0x4a002300 0x4>;
861 omap_control_usbotg: control-phy@4a00233c {
862 compatible = "ti,control-phy-otghs";
863 reg = <0x4a00233c 0x4>;
864 reg-names = "otghs_control";
867 usb_otg_hs: usb_otg_hs@4a0ab000 {
868 compatible = "ti,omap4-musb";
869 reg = <0x4a0ab000 0x7ff>;
870 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
871 interrupt-names = "mc", "dma";
872 ti,hwmods = "usb_otg_hs";
873 usb-phy = <&usb2_phy>;
875 phy-names = "usb2-phy";
879 ctrl-module = <&omap_control_usbotg>;
883 compatible = "ti,omap4-aes";
885 reg = <0x4b501000 0xa0>;
886 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
887 dmas = <&sdma 111>, <&sdma 110>;
888 dma-names = "tx", "rx";
892 compatible = "ti,omap4-des";
894 reg = <0x480a5000 0xa0>;
895 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
896 dmas = <&sdma 117>, <&sdma 116>;
897 dma-names = "tx", "rx";
900 abb_mpu: regulator-abb-mpu {
901 compatible = "ti,abb-v2";
902 regulator-name = "abb_mpu";
903 #address-cells = <0>;
905 ti,tranxdone-status-mask = <0x80>;
906 clocks = <&sys_clkin_ck>;
907 ti,settling-time = <50>;
908 ti,clock-cycles = <16>;
913 abb_iva: regulator-abb-iva {
914 compatible = "ti,abb-v2";
915 regulator-name = "abb_iva";
916 #address-cells = <0>;
918 ti,tranxdone-status-mask = <0x80000000>;
919 clocks = <&sys_clkin_ck>;
920 ti,settling-time = <50>;
921 ti,clock-cycles = <16>;
927 compatible = "ti,omap4-dss";
928 reg = <0x58000000 0x80>;
930 ti,hwmods = "dss_core";
931 clocks = <&dss_dss_clk>;
933 #address-cells = <1>;
938 compatible = "ti,omap4-dispc";
939 reg = <0x58001000 0x1000>;
940 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
941 ti,hwmods = "dss_dispc";
942 clocks = <&dss_dss_clk>;
946 rfbi: encoder@58002000 {
947 compatible = "ti,omap4-rfbi";
948 reg = <0x58002000 0x1000>;
950 ti,hwmods = "dss_rfbi";
951 clocks = <&dss_dss_clk>, <&l3_div_ck>;
952 clock-names = "fck", "ick";
955 venc: encoder@58003000 {
956 compatible = "ti,omap4-venc";
957 reg = <0x58003000 0x1000>;
959 ti,hwmods = "dss_venc";
960 clocks = <&dss_tv_clk>;
964 dsi1: encoder@58004000 {
965 compatible = "ti,omap4-dsi";
966 reg = <0x58004000 0x200>,
969 reg-names = "proto", "phy", "pll";
970 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
972 ti,hwmods = "dss_dsi1";
973 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
974 clock-names = "fck", "sys_clk";
977 dsi2: encoder@58005000 {
978 compatible = "ti,omap4-dsi";
979 reg = <0x58005000 0x200>,
982 reg-names = "proto", "phy", "pll";
983 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
985 ti,hwmods = "dss_dsi2";
986 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
987 clock-names = "fck", "sys_clk";
990 hdmi: encoder@58006000 {
991 compatible = "ti,omap4-hdmi";
992 reg = <0x58006000 0x200>,
996 reg-names = "wp", "pll", "phy", "core";
997 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
999 ti,hwmods = "dss_hdmi";
1000 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
1001 clock-names = "fck", "sys_clk";
1003 dma-names = "audio_tx";
1009 /include/ "omap44xx-clocks.dtsi"