2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/pinctrl/omap.h>
14 #include "skeleton.dtsi"
20 compatible = "ti,omap5";
21 interrupt-parent = <&gic>;
43 compatible = "arm,cortex-a15";
52 clocks = <&dpll_mpu_ck>;
55 clock-latency = <300000>; /* From omap-cpufreq driver */
58 cooling-min-level = <0>;
59 cooling-max-level = <2>;
60 #cooling-cells = <2>; /* min followed by max */
64 compatible = "arm,cortex-a15";
70 #include "omap4-cpu-thermal.dtsi"
71 #include "omap5-gpu-thermal.dtsi"
72 #include "omap5-core-thermal.dtsi"
76 compatible = "arm,armv7-timer";
77 /* PPI secure/nonsecure IRQ */
78 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
79 <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
80 <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
81 <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
85 compatible = "arm,cortex-a15-pmu";
86 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
87 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
90 gic: interrupt-controller@48211000 {
91 compatible = "arm,cortex-a15-gic";
93 #interrupt-cells = <3>;
94 reg = <0x48211000 0x1000>,
101 * The soc node represents the soc top level view. It is used for IPs
102 * that are not memory mapped in the MPU view or for the MPU itself.
105 compatible = "ti,omap-infra";
107 compatible = "ti,omap5-mpu";
113 * XXX: Use a flat representation of the OMAP3 interconnect.
114 * The real OMAP interconnect network is quite complex.
115 * Since it will not bring real advantage to represent that in DT for
116 * the moment, just use a fake OCP bus entry to represent the whole bus
120 compatible = "ti,omap4-l3-noc", "simple-bus";
121 #address-cells = <1>;
124 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
125 reg = <0x44000000 0x2000>,
128 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
129 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
132 compatible = "ti,omap5-prm";
133 reg = <0x4ae06000 0x3000>;
136 #address-cells = <1>;
140 prm_clockdomains: clockdomains {
144 cm_core_aon: cm_core_aon@4a004000 {
145 compatible = "ti,omap5-cm-core-aon";
146 reg = <0x4a004000 0x2000>;
148 cm_core_aon_clocks: clocks {
149 #address-cells = <1>;
153 cm_core_aon_clockdomains: clockdomains {
157 scrm: scrm@4ae0a000 {
158 compatible = "ti,omap5-scrm";
159 reg = <0x4ae0a000 0x2000>;
161 scrm_clocks: clocks {
162 #address-cells = <1>;
166 scrm_clockdomains: clockdomains {
170 cm_core: cm_core@4a008000 {
171 compatible = "ti,omap5-cm-core";
172 reg = <0x4a008000 0x3000>;
174 cm_core_clocks: clocks {
175 #address-cells = <1>;
179 cm_core_clockdomains: clockdomains {
183 counter32k: counter@4ae04000 {
184 compatible = "ti,omap-counter32k";
185 reg = <0x4ae04000 0x40>;
186 ti,hwmods = "counter_32k";
189 omap5_pmx_core: pinmux@4a002840 {
190 compatible = "ti,omap4-padconf", "pinctrl-single";
191 reg = <0x4a002840 0x01b6>;
192 #address-cells = <1>;
194 pinctrl-single,register-width = <16>;
195 pinctrl-single,function-mask = <0x7fff>;
197 omap5_pmx_wkup: pinmux@4ae0c840 {
198 compatible = "ti,omap4-padconf", "pinctrl-single";
199 reg = <0x4ae0c840 0x0038>;
200 #address-cells = <1>;
202 pinctrl-single,register-width = <16>;
203 pinctrl-single,function-mask = <0x7fff>;
206 omap5_padconf_global: tisyscon@4a002da0 {
207 compatible = "syscon";
208 reg = <0x4A002da0 0xec>;
211 pbias_regulator: pbias_regulator {
212 compatible = "ti,pbias-omap";
214 syscon = <&omap5_padconf_global>;
215 pbias_mmc_reg: pbias_mmc_omap5 {
216 regulator-name = "pbias_mmc_omap5";
217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <3000000>;
222 sdma: dma-controller@4a056000 {
223 compatible = "ti,omap4430-sdma";
224 reg = <0x4a056000 0x1000>;
225 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
226 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
227 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
228 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
230 #dma-channels = <32>;
231 #dma-requests = <127>;
234 gpio1: gpio@4ae10000 {
235 compatible = "ti,omap4-gpio";
236 reg = <0x4ae10000 0x200>;
237 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
242 interrupt-controller;
243 #interrupt-cells = <2>;
246 gpio2: gpio@48055000 {
247 compatible = "ti,omap4-gpio";
248 reg = <0x48055000 0x200>;
249 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
253 interrupt-controller;
254 #interrupt-cells = <2>;
257 gpio3: gpio@48057000 {
258 compatible = "ti,omap4-gpio";
259 reg = <0x48057000 0x200>;
260 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
264 interrupt-controller;
265 #interrupt-cells = <2>;
268 gpio4: gpio@48059000 {
269 compatible = "ti,omap4-gpio";
270 reg = <0x48059000 0x200>;
271 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
275 interrupt-controller;
276 #interrupt-cells = <2>;
279 gpio5: gpio@4805b000 {
280 compatible = "ti,omap4-gpio";
281 reg = <0x4805b000 0x200>;
282 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
286 interrupt-controller;
287 #interrupt-cells = <2>;
290 gpio6: gpio@4805d000 {
291 compatible = "ti,omap4-gpio";
292 reg = <0x4805d000 0x200>;
293 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
297 interrupt-controller;
298 #interrupt-cells = <2>;
301 gpio7: gpio@48051000 {
302 compatible = "ti,omap4-gpio";
303 reg = <0x48051000 0x200>;
304 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
308 interrupt-controller;
309 #interrupt-cells = <2>;
312 gpio8: gpio@48053000 {
313 compatible = "ti,omap4-gpio";
314 reg = <0x48053000 0x200>;
315 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
319 interrupt-controller;
320 #interrupt-cells = <2>;
323 gpmc: gpmc@50000000 {
324 compatible = "ti,omap4430-gpmc";
325 reg = <0x50000000 0x1000>;
326 #address-cells = <2>;
328 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
330 gpmc,num-waitpins = <4>;
332 clocks = <&l3_iclk_div>;
337 compatible = "ti,omap4-i2c";
338 reg = <0x48070000 0x100>;
339 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
340 #address-cells = <1>;
346 compatible = "ti,omap4-i2c";
347 reg = <0x48072000 0x100>;
348 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
349 #address-cells = <1>;
355 compatible = "ti,omap4-i2c";
356 reg = <0x48060000 0x100>;
357 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
358 #address-cells = <1>;
364 compatible = "ti,omap4-i2c";
365 reg = <0x4807a000 0x100>;
366 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
367 #address-cells = <1>;
373 compatible = "ti,omap4-i2c";
374 reg = <0x4807c000 0x100>;
375 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
376 #address-cells = <1>;
381 hwspinlock: spinlock@4a0f6000 {
382 compatible = "ti,omap4-hwspinlock";
383 reg = <0x4a0f6000 0x1000>;
384 ti,hwmods = "spinlock";
388 mcspi1: spi@48098000 {
389 compatible = "ti,omap4-mcspi";
390 reg = <0x48098000 0x200>;
391 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
392 #address-cells = <1>;
394 ti,hwmods = "mcspi1";
404 dma-names = "tx0", "rx0", "tx1", "rx1",
405 "tx2", "rx2", "tx3", "rx3";
408 mcspi2: spi@4809a000 {
409 compatible = "ti,omap4-mcspi";
410 reg = <0x4809a000 0x200>;
411 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
412 #address-cells = <1>;
414 ti,hwmods = "mcspi2";
420 dma-names = "tx0", "rx0", "tx1", "rx1";
423 mcspi3: spi@480b8000 {
424 compatible = "ti,omap4-mcspi";
425 reg = <0x480b8000 0x200>;
426 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
427 #address-cells = <1>;
429 ti,hwmods = "mcspi3";
431 dmas = <&sdma 15>, <&sdma 16>;
432 dma-names = "tx0", "rx0";
435 mcspi4: spi@480ba000 {
436 compatible = "ti,omap4-mcspi";
437 reg = <0x480ba000 0x200>;
438 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
439 #address-cells = <1>;
441 ti,hwmods = "mcspi4";
443 dmas = <&sdma 70>, <&sdma 71>;
444 dma-names = "tx0", "rx0";
447 uart1: serial@4806a000 {
448 compatible = "ti,omap4-uart";
449 reg = <0x4806a000 0x100>;
450 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
452 clock-frequency = <48000000>;
455 uart2: serial@4806c000 {
456 compatible = "ti,omap4-uart";
457 reg = <0x4806c000 0x100>;
458 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
460 clock-frequency = <48000000>;
463 uart3: serial@48020000 {
464 compatible = "ti,omap4-uart";
465 reg = <0x48020000 0x100>;
466 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
468 clock-frequency = <48000000>;
471 uart4: serial@4806e000 {
472 compatible = "ti,omap4-uart";
473 reg = <0x4806e000 0x100>;
474 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
476 clock-frequency = <48000000>;
479 uart5: serial@48066000 {
480 compatible = "ti,omap4-uart";
481 reg = <0x48066000 0x100>;
482 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
484 clock-frequency = <48000000>;
487 uart6: serial@48068000 {
488 compatible = "ti,omap4-uart";
489 reg = <0x48068000 0x100>;
490 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
492 clock-frequency = <48000000>;
496 compatible = "ti,omap4-hsmmc";
497 reg = <0x4809c000 0x400>;
498 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
501 ti,needs-special-reset;
502 dmas = <&sdma 61>, <&sdma 62>;
503 dma-names = "tx", "rx";
504 pbias-supply = <&pbias_mmc_reg>;
508 compatible = "ti,omap4-hsmmc";
509 reg = <0x480b4000 0x400>;
510 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
512 ti,needs-special-reset;
513 dmas = <&sdma 47>, <&sdma 48>;
514 dma-names = "tx", "rx";
518 compatible = "ti,omap4-hsmmc";
519 reg = <0x480ad000 0x400>;
520 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
522 ti,needs-special-reset;
523 dmas = <&sdma 77>, <&sdma 78>;
524 dma-names = "tx", "rx";
528 compatible = "ti,omap4-hsmmc";
529 reg = <0x480d1000 0x400>;
530 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
532 ti,needs-special-reset;
533 dmas = <&sdma 57>, <&sdma 58>;
534 dma-names = "tx", "rx";
538 compatible = "ti,omap4-hsmmc";
539 reg = <0x480d5000 0x400>;
540 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
542 ti,needs-special-reset;
543 dmas = <&sdma 59>, <&sdma 60>;
544 dma-names = "tx", "rx";
547 mmu_dsp: mmu@4a066000 {
548 compatible = "ti,omap4-iommu";
549 reg = <0x4a066000 0x100>;
550 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
551 ti,hwmods = "mmu_dsp";
554 mmu_ipu: mmu@55082000 {
555 compatible = "ti,omap4-iommu";
556 reg = <0x55082000 0x100>;
557 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
558 ti,hwmods = "mmu_ipu";
559 ti,iommu-bus-err-back;
562 keypad: keypad@4ae1c000 {
563 compatible = "ti,omap4-keypad";
564 reg = <0x4ae1c000 0x400>;
568 mcpdm: mcpdm@40132000 {
569 compatible = "ti,omap4-mcpdm";
570 reg = <0x40132000 0x7f>, /* MPU private access */
571 <0x49032000 0x7f>; /* L3 Interconnect */
572 reg-names = "mpu", "dma";
573 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
577 dma-names = "up_link", "dn_link";
581 dmic: dmic@4012e000 {
582 compatible = "ti,omap4-dmic";
583 reg = <0x4012e000 0x7f>, /* MPU private access */
584 <0x4902e000 0x7f>; /* L3 Interconnect */
585 reg-names = "mpu", "dma";
586 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
589 dma-names = "up_link";
593 mcbsp1: mcbsp@40122000 {
594 compatible = "ti,omap4-mcbsp";
595 reg = <0x40122000 0xff>, /* MPU private access */
596 <0x49022000 0xff>; /* L3 Interconnect */
597 reg-names = "mpu", "dma";
598 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
599 interrupt-names = "common";
600 ti,buffer-size = <128>;
601 ti,hwmods = "mcbsp1";
604 dma-names = "tx", "rx";
608 mcbsp2: mcbsp@40124000 {
609 compatible = "ti,omap4-mcbsp";
610 reg = <0x40124000 0xff>, /* MPU private access */
611 <0x49024000 0xff>; /* L3 Interconnect */
612 reg-names = "mpu", "dma";
613 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
614 interrupt-names = "common";
615 ti,buffer-size = <128>;
616 ti,hwmods = "mcbsp2";
619 dma-names = "tx", "rx";
623 mcbsp3: mcbsp@40126000 {
624 compatible = "ti,omap4-mcbsp";
625 reg = <0x40126000 0xff>, /* MPU private access */
626 <0x49026000 0xff>; /* L3 Interconnect */
627 reg-names = "mpu", "dma";
628 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
629 interrupt-names = "common";
630 ti,buffer-size = <128>;
631 ti,hwmods = "mcbsp3";
634 dma-names = "tx", "rx";
638 mailbox: mailbox@4a0f4000 {
639 compatible = "ti,omap4-mailbox";
640 reg = <0x4a0f4000 0x200>;
641 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
642 ti,hwmods = "mailbox";
645 timer1: timer@4ae18000 {
646 compatible = "ti,omap5430-timer";
647 reg = <0x4ae18000 0x80>;
648 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
649 ti,hwmods = "timer1";
653 timer2: timer@48032000 {
654 compatible = "ti,omap5430-timer";
655 reg = <0x48032000 0x80>;
656 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
657 ti,hwmods = "timer2";
660 timer3: timer@48034000 {
661 compatible = "ti,omap5430-timer";
662 reg = <0x48034000 0x80>;
663 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
664 ti,hwmods = "timer3";
667 timer4: timer@48036000 {
668 compatible = "ti,omap5430-timer";
669 reg = <0x48036000 0x80>;
670 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
671 ti,hwmods = "timer4";
674 timer5: timer@40138000 {
675 compatible = "ti,omap5430-timer";
676 reg = <0x40138000 0x80>,
678 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
679 ti,hwmods = "timer5";
684 timer6: timer@4013a000 {
685 compatible = "ti,omap5430-timer";
686 reg = <0x4013a000 0x80>,
688 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
689 ti,hwmods = "timer6";
694 timer7: timer@4013c000 {
695 compatible = "ti,omap5430-timer";
696 reg = <0x4013c000 0x80>,
698 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
699 ti,hwmods = "timer7";
703 timer8: timer@4013e000 {
704 compatible = "ti,omap5430-timer";
705 reg = <0x4013e000 0x80>,
707 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
708 ti,hwmods = "timer8";
713 timer9: timer@4803e000 {
714 compatible = "ti,omap5430-timer";
715 reg = <0x4803e000 0x80>;
716 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
717 ti,hwmods = "timer9";
721 timer10: timer@48086000 {
722 compatible = "ti,omap5430-timer";
723 reg = <0x48086000 0x80>;
724 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
725 ti,hwmods = "timer10";
729 timer11: timer@48088000 {
730 compatible = "ti,omap5430-timer";
731 reg = <0x48088000 0x80>;
732 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
733 ti,hwmods = "timer11";
738 compatible = "ti,omap5-wdt", "ti,omap3-wdt";
739 reg = <0x4ae14000 0x80>;
740 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
741 ti,hwmods = "wd_timer2";
745 compatible = "ti,omap5-dmm";
746 reg = <0x4e000000 0x800>;
747 interrupts = <0 113 0x4>;
751 emif1: emif@4c000000 {
752 compatible = "ti,emif-4d5";
755 phy-type = <2>; /* DDR PHY type: Intelli PHY */
756 reg = <0x4c000000 0x400>;
757 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
758 hw-caps-read-idle-ctrl;
759 hw-caps-ll-interface;
763 emif2: emif@4d000000 {
764 compatible = "ti,emif-4d5";
767 phy-type = <2>; /* DDR PHY type: Intelli PHY */
768 reg = <0x4d000000 0x400>;
769 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
770 hw-caps-read-idle-ctrl;
771 hw-caps-ll-interface;
775 omap_control_usb2phy: control-phy@4a002300 {
776 compatible = "ti,control-phy-usb2";
777 reg = <0x4a002300 0x4>;
781 omap_control_usb3phy: control-phy@4a002370 {
782 compatible = "ti,control-phy-pipe3";
783 reg = <0x4a002370 0x4>;
787 usb3: omap_dwc3@4a020000 {
788 compatible = "ti,dwc3";
789 ti,hwmods = "usb_otg_ss";
790 reg = <0x4a020000 0x10000>;
791 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
792 #address-cells = <1>;
797 compatible = "snps,dwc3";
798 reg = <0x4a030000 0x10000>;
799 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
800 phys = <&usb2_phy>, <&usb3_phy>;
801 phy-names = "usb2-phy", "usb3-phy";
802 dr_mode = "peripheral";
808 compatible = "ti,omap-ocp2scp";
809 #address-cells = <1>;
811 reg = <0x4a080000 0x20>;
813 ti,hwmods = "ocp2scp1";
814 usb2_phy: usb2phy@4a084000 {
815 compatible = "ti,omap-usb2";
816 reg = <0x4a084000 0x7c>;
817 ctrl-module = <&omap_control_usb2phy>;
818 clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
819 clock-names = "wkupclk", "refclk";
823 usb3_phy: usb3phy@4a084400 {
824 compatible = "ti,omap-usb3";
825 reg = <0x4a084400 0x80>,
828 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
829 ctrl-module = <&omap_control_usb3phy>;
830 clocks = <&usb_phy_cm_clk32k>,
832 <&usb_otg_ss_refclk960m>;
833 clock-names = "wkupclk",
840 usbhstll: usbhstll@4a062000 {
841 compatible = "ti,usbhs-tll";
842 reg = <0x4a062000 0x1000>;
843 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
844 ti,hwmods = "usb_tll_hs";
847 usbhshost: usbhshost@4a064000 {
848 compatible = "ti,usbhs-host";
849 reg = <0x4a064000 0x800>;
850 ti,hwmods = "usb_host_hs";
851 #address-cells = <1>;
854 clocks = <&l3init_60m_fclk>,
857 clock-names = "refclk_60m_int",
861 usbhsohci: ohci@4a064800 {
862 compatible = "ti,ohci-omap3";
863 reg = <0x4a064800 0x400>;
864 interrupt-parent = <&gic>;
865 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
868 usbhsehci: ehci@4a064c00 {
869 compatible = "ti,ehci-omap";
870 reg = <0x4a064c00 0x400>;
871 interrupt-parent = <&gic>;
872 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
876 bandgap: bandgap@4a0021e0 {
877 reg = <0x4a0021e0 0xc
881 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
882 compatible = "ti,omap5430-bandgap";
884 #thermal-sensor-cells = <1>;
887 omap_control_sata: control-phy@4a002374 {
888 compatible = "ti,control-phy-pipe3";
889 reg = <0x4a002374 0x4>;
891 clocks = <&sys_clkin>;
892 clock-names = "sysclk";
897 compatible = "ti,omap-ocp2scp";
898 #address-cells = <1>;
900 reg = <0x4a090000 0x20>;
902 ti,hwmods = "ocp2scp3";
903 sata_phy: phy@4a096000 {
904 compatible = "ti,phy-pipe3-sata";
905 reg = <0x4A096000 0x80>, /* phy_rx */
906 <0x4A096400 0x64>, /* phy_tx */
907 <0x4A096800 0x40>; /* pll_ctrl */
908 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
909 ctrl-module = <&omap_control_sata>;
910 clocks = <&sys_clkin>;
911 clock-names = "sysclk";
916 sata: sata@4a141100 {
917 compatible = "snps,dwc-ahci";
918 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
919 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
921 phy-names = "sata-phy";
922 clocks = <&sata_ref_clk>;
927 compatible = "ti,omap5-dss";
928 reg = <0x58000000 0x80>;
930 ti,hwmods = "dss_core";
931 clocks = <&dss_dss_clk>;
933 #address-cells = <1>;
938 compatible = "ti,omap5-dispc";
939 reg = <0x58001000 0x1000>;
940 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
941 ti,hwmods = "dss_dispc";
942 clocks = <&dss_dss_clk>;
946 dsi1: encoder@58004000 {
947 compatible = "ti,omap5-dsi";
948 reg = <0x58004000 0x200>,
951 reg-names = "proto", "phy", "pll";
952 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
954 ti,hwmods = "dss_dsi1";
955 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
956 clock-names = "fck", "sys_clk";
959 dsi2: encoder@58005000 {
960 compatible = "ti,omap5-dsi";
961 reg = <0x58009000 0x200>,
964 reg-names = "proto", "phy", "pll";
965 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
967 ti,hwmods = "dss_dsi2";
968 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
969 clock-names = "fck", "sys_clk";
972 hdmi: encoder@58060000 {
973 compatible = "ti,omap5-hdmi";
974 reg = <0x58040000 0x200>,
977 <0x58060000 0x19000>;
978 reg-names = "wp", "pll", "phy", "core";
979 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
981 ti,hwmods = "dss_hdmi";
982 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
983 clock-names = "fck", "sys_clk";
985 dma-names = "audio_tx";
991 /include/ "omap54xx-clocks.dtsi"