2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
43 #include "rk3036.dtsi"
46 model = "Rockchip RK3036 KylinBoard";
47 compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
49 sdio_pwrseq: sdio-pwrseq {
50 compatible = "mmc-pwrseq-simple";
51 pinctrl-names = "default";
52 pinctrl-0 = <&bt_wake_h>;
55 * On the module itself this is one of these (depending
56 * on the actual card populated):
57 * - SDIO_RESET_L_WL_REG_ON
58 * - SDIO_RESET_L_WL_RST
59 * - SDIO_RESET_L_BT_EN
61 reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
62 <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
63 <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */
67 compatible = "simple-audio-card";
68 simple-audio-card,format = "i2s";
69 simple-audio-card,name = "rockchip,rt5616-codec";
70 simple-audio-card,mclk-fs = <256>;
71 simple-audio-card,widgets =
72 "Microphone", "Microphone Jack",
73 "Headphone", "Headphone Jack";
74 simple-audio-card,routing =
75 "MIC1", "Microphone Jack",
76 "MIC2", "Microphone Jack",
77 "Microphone Jack", "micbias1",
78 "Headphone Jack", "HPOL",
79 "Headphone Jack", "HPOR";
81 simple-audio-card,cpu {
85 simple-audio-card,codec {
86 sound-dai = <&rt5616>;
90 vcc_sys: vsys-regulator {
91 compatible = "regulator-fixed";
92 regulator-name = "vcc_sys";
93 regulator-min-microvolt = <5000000>;
94 regulator-max-microvolt = <5000000>;
109 clock-frequency = <400000>;
114 compatible = "rockchip,rk808";
116 interrupt-parent = <&gpio2>;
117 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&pmic_int &global_pwroff>;
120 rockchip,system-power-controller;
123 clock-output-names = "xin32k", "rk808-clkout2";
125 vcc1-supply = <&vcc_sys>;
126 vcc2-supply = <&vcc_sys>;
127 vcc3-supply = <&vcc_sys>;
128 vcc4-supply = <&vcc_sys>;
129 vcc6-supply = <&vcc_sys>;
130 vcc7-supply = <&vcc_sys>;
131 vcc8-supply = <&vcc_18>;
132 vcc9-supply = <&vcc_io>;
133 vcc10-supply = <&vcc_io>;
134 vcc11-supply = <&vcc_sys>;
135 vcc12-supply = <&vcc_io>;
136 vddio-supply = <&vccio_pmu>;
142 regulator-min-microvolt = <750000>;
143 regulator-max-microvolt = <1350000>;
144 regulator-name = "vdd_arm";
145 regulator-state-mem {
146 regulator-off-in-suspend;
153 regulator-min-microvolt = <850000>;
154 regulator-max-microvolt = <1250000>;
155 regulator-name = "vdd_gpu";
156 regulator-state-mem {
157 regulator-on-in-suspend;
158 regulator-suspend-microvolt = <1000000>;
165 regulator-name = "vcc_ddr";
166 regulator-state-mem {
167 regulator-on-in-suspend;
174 regulator-min-microvolt = <3300000>;
175 regulator-max-microvolt = <3300000>;
176 regulator-name = "vcc_io";
177 regulator-state-mem {
178 regulator-on-in-suspend;
179 regulator-suspend-microvolt = <3300000>;
183 vccio_pmu: LDO_REG1 {
186 regulator-min-microvolt = <3300000>;
187 regulator-max-microvolt = <3300000>;
188 regulator-name = "vccio_pmu";
189 regulator-state-mem {
190 regulator-on-in-suspend;
191 regulator-suspend-microvolt = <3300000>;
198 regulator-min-microvolt = <3300000>;
199 regulator-max-microvolt = <3300000>;
200 regulator-name = "vcc_tp";
201 regulator-state-mem {
202 regulator-off-in-suspend;
209 regulator-min-microvolt = <1000000>;
210 regulator-max-microvolt = <1000000>;
211 regulator-name = "vdd_10";
212 regulator-state-mem {
213 regulator-on-in-suspend;
214 regulator-suspend-microvolt = <1000000>;
218 vcc18_lcd: LDO_REG4 {
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
223 regulator-name = "vcc18_lcd";
224 regulator-state-mem {
225 regulator-on-in-suspend;
226 regulator-suspend-microvolt = <1800000>;
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <3300000>;
235 regulator-name = "vccio_sd";
236 regulator-state-mem {
237 regulator-on-in-suspend;
238 regulator-suspend-microvolt = <3300000>;
245 regulator-min-microvolt = <1800000>;
246 regulator-max-microvolt = <2500000>;
247 regulator-name = "vout5";
248 regulator-state-mem {
249 regulator-on-in-suspend;
250 regulator-suspend-microvolt = <1800000>;
257 regulator-min-microvolt = <1800000>;
258 regulator-max-microvolt = <1800000>;
259 regulator-name = "vcc_18";
260 regulator-state-mem {
261 regulator-on-in-suspend;
262 regulator-suspend-microvolt = <1800000>;
266 vcca_codec: LDO_REG8 {
269 regulator-min-microvolt = <1800000>;
270 regulator-max-microvolt = <1800000>;
271 regulator-name = "vcca_codec";
272 regulator-state-mem {
273 regulator-on-in-suspend;
274 regulator-suspend-microvolt = <1800000>;
278 vcc_wl: SWITCH_REG1 {
281 regulator-name = "vcc_wl";
282 regulator-state-mem {
283 regulator-on-in-suspend;
287 vcc_lcd: SWITCH_REG2 {
290 regulator-name = "vcc_lcd";
291 regulator-state-mem {
292 regulator-on-in-suspend;
303 compatible = "rt5616";
305 #sound-dai-cells = <0>;
310 #sound-dai-cells = <0>;
321 default-sample-phase = <90>;
322 keep-power-in-suspend;
323 mmc-pwrseq = <&sdio_pwrseq>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
338 card-detect-delay = <200>;
341 pinctrl-names = "default";
342 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
364 rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
369 bt_wake_h: bt-wake-h {
370 rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
375 sdmmc_pwr: sdmmc-pwr {
376 rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
381 global_pwroff: global-pwroff {
382 rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;