2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
41 #include <dt-bindings/gpio/gpio.h>
42 #include <dt-bindings/interrupt-controller/irq.h>
43 #include <dt-bindings/interrupt-controller/arm-gic.h>
44 #include <dt-bindings/pinctrl/rockchip.h>
45 #include <dt-bindings/clock/rk3036-cru.h>
46 #include "skeleton.dtsi"
49 compatible = "rockchip,rk3036";
51 interrupt-parent = <&gic>;
69 enable-method = "rockchip,rk3036-smp";
73 compatible = "arm,cortex-a7";
75 resets = <&cru SRST_CORE0>;
80 clock-latency = <40000>;
81 clocks = <&cru ARMCLK>;
86 compatible = "arm,cortex-a7";
88 resets = <&cru SRST_CORE1>;
93 compatible = "arm,amba-bus";
99 compatible = "arm,pl330", "arm,primecell";
100 reg = <0x20078000 0x4000>;
101 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
102 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
104 arm,pl330-broken-no-flushp;
105 peripherals-req-type-burst;
106 clocks = <&cru ACLK_DMAC2>;
107 clock-names = "apb_pclk";
112 compatible = "arm,cortex-a7-pmu";
113 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
114 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
115 interrupt-affinity = <&cpu0>, <&cpu1>;
119 compatible = "rockchip,display-subsystem";
124 compatible = "arm,armv7-timer";
125 arm,cpu-registers-not-fw-configured;
126 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
127 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
128 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
129 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
130 clock-frequency = <24000000>;
134 compatible = "fixed-clock";
135 clock-frequency = <24000000>;
136 clock-output-names = "xin24m";
140 bus_intmem@10080000 {
141 compatible = "mmio-sram";
142 reg = <0x10080000 0x2000>;
143 #address-cells = <1>;
145 ranges = <0 0x10080000 0x2000>;
148 compatible = "rockchip,rk3066-smp-sram";
154 compatible = "rockchip,rk3036-vop";
155 reg = <0x10118000 0x19c>;
156 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
157 clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
158 clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
159 resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
160 reset-names = "axi", "ahb", "dclk";
165 #address-cells = <1>;
167 vop_out_hdmi: endpoint@0 {
169 remote-endpoint = <&hdmi_in_vop>;
174 vop_mmu: iommu@10118300 {
175 compatible = "rockchip,iommu";
176 reg = <0x10118300 0x100>;
177 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
178 interrupt-names = "vop_mmu";
183 gic: interrupt-controller@10139000 {
184 compatible = "arm,gic-400";
185 interrupt-controller;
186 #interrupt-cells = <3>;
187 #address-cells = <0>;
189 reg = <0x10139000 0x1000>,
193 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
196 usb_otg: usb@10180000 {
197 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
199 reg = <0x10180000 0x40000>;
200 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
201 clocks = <&cru HCLK_OTG0>;
204 g-np-tx-fifo-size = <16>;
205 g-rx-fifo-size = <275>;
206 g-tx-fifo-size = <256 128 128 64 64 32>;
211 usb_host: usb@101c0000 {
212 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
214 reg = <0x101c0000 0x40000>;
215 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
216 clocks = <&cru HCLK_OTG1>;
222 emac: ethernet@10200000 {
223 compatible = "rockchip,rk3036-emac", "snps,arc-emac";
224 reg = <0x10200000 0x4000>;
225 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
226 #address-cells = <1>;
228 rockchip,grf = <&grf>;
229 clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
230 clock-names = "hclk", "macref", "macclk";
232 * Fix the emac parent clock is DPLL instead of APLL.
233 * since that will cause some unstable things if the cpufreq
234 * is working. (e.g: the accurate 50MHz what mac_ref need)
236 assigned-clocks = <&cru SCLK_MACPLL>;
237 assigned-clock-parents = <&cru PLL_DPLL>;
243 sdmmc: dwmmc@10214000 {
244 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
245 reg = <0x10214000 0x4000>;
246 clock-frequency = <37500000>;
247 clock-freq-min-max = <400000 37500000>;
248 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
249 clock-names = "biu", "ciu";
250 fifo-depth = <0x100>;
251 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
255 sdio: dwmmc@10218000 {
256 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
257 reg = <0x10218000 0x4000>;
258 clock-freq-min-max = <400000 37500000>;
259 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
260 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
261 clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
262 fifo-depth = <0x100>;
263 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
267 emmc: dwmmc@1021c000 {
268 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
269 reg = <0x1021c000 0x4000>;
270 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
273 clock-frequency = <37500000>;
274 clock-freq-min-max = <400000 37500000>;
275 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
276 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
277 clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
278 default-sample-phase = <158>;
282 fifo-depth = <0x100>;
287 pinctrl-names = "default";
288 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
293 compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
294 reg = <0x10220000 0x4000>;
295 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
296 #address-cells = <1>;
298 clock-names = "i2s_clk", "i2s_hclk";
299 clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
300 dmas = <&pdma 0>, <&pdma 1>;
301 dma-names = "tx", "rx";
302 pinctrl-names = "default";
303 pinctrl-0 = <&i2s_bus>;
307 cru: clock-controller@20000000 {
308 compatible = "rockchip,rk3036-cru";
309 reg = <0x20000000 0x1000>;
310 rockchip,grf = <&grf>;
313 assigned-clocks = <&cru PLL_GPLL>;
314 assigned-clock-rates = <594000000>;
317 grf: syscon@20008000 {
318 compatible = "rockchip,rk3036-grf", "syscon";
319 reg = <0x20008000 0x1000>;
322 acodec: acodec-ana@20030000 {
323 compatible = "rk3036-codec";
324 reg = <0x20030000 0x4000>;
325 rockchip,grf = <&grf>;
326 clock-names = "acodec_pclk";
327 clocks = <&cru PCLK_ACODEC>;
331 hdmi: hdmi@20034000 {
332 compatible = "rockchip,rk3036-inno-hdmi";
333 reg = <0x20034000 0x4000>;
334 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
335 clocks = <&cru PCLK_HDMI>;
336 clock-names = "pclk";
337 rockchip,grf = <&grf>;
338 pinctrl-names = "default";
339 pinctrl-0 = <&hdmi_ctl>;
340 #address-cells = <1>;
342 #sound-dai-cells = <0>;
346 #address-cells = <1>;
348 hdmi_in_vop: endpoint@0 {
350 remote-endpoint = <&vop_out_hdmi>;
355 hdmi_sound: hdmi-sound {
356 compatible = "simple-audio-card";
357 simple-audio-card,name = "rockchip,hdmi";
358 simple-audio-card,widgets = "Headphone", "Out Jack",
362 simple-audio-card,dai-link {
374 timer: timer@20044000 {
375 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
376 reg = <0x20044000 0x20>;
377 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
378 clocks = <&xin24m>, <&cru PCLK_TIMER>;
379 clock-names = "timer", "pclk";
383 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
384 reg = <0x20050000 0x10>;
386 clocks = <&cru PCLK_PWM>;
388 pinctrl-names = "default";
389 pinctrl-0 = <&pwm0_pin>;
394 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
395 reg = <0x20050010 0x10>;
397 clocks = <&cru PCLK_PWM>;
399 pinctrl-names = "default";
400 pinctrl-0 = <&pwm1_pin>;
405 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
406 reg = <0x20050020 0x10>;
408 clocks = <&cru PCLK_PWM>;
410 pinctrl-names = "default";
411 pinctrl-0 = <&pwm2_pin>;
416 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
417 reg = <0x20050030 0x10>;
419 clocks = <&cru PCLK_PWM>;
421 pinctrl-names = "default";
422 pinctrl-0 = <&pwm3_pin>;
427 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
428 reg = <0x20056000 0x1000>;
429 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
430 #address-cells = <1>;
433 clocks = <&cru PCLK_I2C1>;
434 pinctrl-names = "default";
435 pinctrl-0 = <&i2c1_xfer>;
440 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
441 reg = <0x2005a000 0x1000>;
442 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
443 #address-cells = <1>;
446 clocks = <&cru PCLK_I2C2>;
447 pinctrl-names = "default";
448 pinctrl-0 = <&i2c2_xfer>;
452 uart0: serial@20060000 {
453 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
454 reg = <0x20060000 0x100>;
455 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
458 clock-frequency = <24000000>;
459 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
460 clock-names = "baudclk", "apb_pclk";
461 pinctrl-names = "default";
462 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
466 uart1: serial@20064000 {
467 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
468 reg = <0x20064000 0x100>;
469 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
472 clock-frequency = <24000000>;
473 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
474 clock-names = "baudclk", "apb_pclk";
475 pinctrl-names = "default";
476 pinctrl-0 = <&uart1_xfer>;
480 uart2: serial@20068000 {
481 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
482 reg = <0x20068000 0x100>;
483 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
486 clock-frequency = <24000000>;
487 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
488 clock-names = "baudclk", "apb_pclk";
489 pinctrl-names = "default";
490 pinctrl-0 = <&uart2_xfer>;
495 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
496 reg = <0x20072000 0x1000>;
497 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
498 #address-cells = <1>;
501 clocks = <&cru PCLK_I2C0>;
502 pinctrl-names = "default";
503 pinctrl-0 = <&i2c0_xfer>;
508 compatible = "rockchip,rockchip-spi";
509 reg = <0x20074000 0x1000>;
510 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
511 clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
512 clock-names = "apb-pclk","spi_pclk";
513 dmas = <&pdma 8>, <&pdma 9>;
514 dma-names = "tx", "rx";
515 pinctrl-names = "default";
516 pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
517 #address-cells = <1>;
523 compatible = "rockchip,rk3036-pinctrl";
524 rockchip,grf = <&grf>;
525 #address-cells = <1>;
529 gpio0: gpio0@2007c000 {
530 compatible = "rockchip,gpio-bank";
531 reg = <0x2007c000 0x100>;
532 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
533 clocks = <&cru PCLK_GPIO0>;
538 interrupt-controller;
539 #interrupt-cells = <2>;
542 gpio1: gpio1@20080000 {
543 compatible = "rockchip,gpio-bank";
544 reg = <0x20080000 0x100>;
545 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
546 clocks = <&cru PCLK_GPIO1>;
551 interrupt-controller;
552 #interrupt-cells = <2>;
555 gpio2: gpio2@20084000 {
556 compatible = "rockchip,gpio-bank";
557 reg = <0x20084000 0x100>;
558 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
559 clocks = <&cru PCLK_GPIO2>;
564 interrupt-controller;
565 #interrupt-cells = <2>;
568 pcfg_pull_default: pcfg_pull_default {
569 bias-pull-pin-default;
572 pcfg_pull_none: pcfg-pull-none {
578 rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
584 rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
590 rockchip,pins = <0 1 2 &pcfg_pull_none>;
596 rockchip,pins = <0 27 1 &pcfg_pull_none>;
601 sdmmc_clk: sdmmc-clk {
602 rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
605 sdmmc_cmd: sdmmc-cmd {
606 rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
610 rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
613 sdmmc_bus1: sdmmc-bus1 {
614 rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
617 sdmmc_bus4: sdmmc-bus4 {
618 rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
619 <1 19 RK_FUNC_1 &pcfg_pull_default>,
620 <1 20 RK_FUNC_1 &pcfg_pull_default>,
621 <1 21 RK_FUNC_1 &pcfg_pull_default>;
626 sdio_bus1: sdio-bus1 {
627 rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
630 sdio_bus4: sdio-bus4 {
631 rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
632 <0 12 RK_FUNC_1 &pcfg_pull_default>,
633 <0 13 RK_FUNC_1 &pcfg_pull_default>,
634 <0 14 RK_FUNC_1 &pcfg_pull_default>;
638 rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
642 rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
648 * We run eMMC at max speed; bump up drive strength.
649 * We also have external pulls, so disable the internal ones.
652 rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
656 rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
659 emmc_bus8: emmc-bus8 {
660 rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
661 <1 25 RK_FUNC_2 &pcfg_pull_default>,
662 <1 26 RK_FUNC_2 &pcfg_pull_default>,
663 <1 27 RK_FUNC_2 &pcfg_pull_default>,
664 <1 28 RK_FUNC_2 &pcfg_pull_default>,
665 <1 29 RK_FUNC_2 &pcfg_pull_default>,
666 <1 30 RK_FUNC_2 &pcfg_pull_default>,
667 <1 31 RK_FUNC_2 &pcfg_pull_default>;
672 emac_xfer: emac-xfer {
673 rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
674 <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
675 <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
676 <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
677 <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
678 <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
679 <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
680 <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
683 emac_mdio: emac-mdio {
684 rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
685 <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
690 i2c0_xfer: i2c0-xfer {
691 rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
692 <0 1 RK_FUNC_1 &pcfg_pull_none>;
697 i2c1_xfer: i2c1-xfer {
698 rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
699 <0 3 RK_FUNC_1 &pcfg_pull_none>;
704 i2c2_xfer: i2c2-xfer {
705 rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
706 <2 21 RK_FUNC_1 &pcfg_pull_none>;
712 rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
713 <1 1 RK_FUNC_1 &pcfg_pull_default>,
714 <1 2 RK_FUNC_1 &pcfg_pull_default>,
715 <1 3 RK_FUNC_1 &pcfg_pull_default>,
716 <1 4 RK_FUNC_1 &pcfg_pull_default>,
717 <1 5 RK_FUNC_1 &pcfg_pull_default>;
723 rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
724 <1 9 RK_FUNC_1 &pcfg_pull_none>,
725 <1 10 RK_FUNC_1 &pcfg_pull_none>,
726 <1 11 RK_FUNC_1 &pcfg_pull_none>;
731 uart0_xfer: uart0-xfer {
732 rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
733 <0 17 RK_FUNC_1 &pcfg_pull_none>;
736 uart0_cts: uart0-cts {
737 rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
740 uart0_rts: uart0-rts {
741 rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
746 uart1_xfer: uart1-xfer {
747 rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
748 <2 23 RK_FUNC_1 &pcfg_pull_none>;
750 /* no rts / cts for uart1 */
754 uart2_xfer: uart2-xfer {
755 rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
756 <1 19 RK_FUNC_2 &pcfg_pull_none>;
758 /* no rts / cts for uart2 */
763 rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
767 rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
771 rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
775 rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
780 rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;