2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
42 #include "rk3288-evb.dtsi"
43 #include "rk3288-android.dtsi"
46 compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
48 sdio_pwrseq: sdio-pwrseq {
49 compatible = "mmc-pwrseq-simple";
51 clock-names = "ext_clock";
52 pinctrl-names = "default";
53 pinctrl-0 = <&wifi_enable_h>;
56 * On the module itself this is one of these (depending
57 * on the actual card populated):
58 * - SDIO_RESET_L_WL_REG_ON
59 * - PDN (power down when low)
61 reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
65 compatible = "regulator-fixed";
67 gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
68 pinctrl-names = "default";
69 pinctrl-0 = <&lcd_en>;
70 regulator-name = "vcc_lcd";
71 vin-supply = <&vcc_io>;
75 compatible = "regulator-fixed";
77 gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&wifi_pwr>;
80 regulator-name = "vcc_wl";
81 vin-supply = <&vcc_18>;
86 cpu0-supply = <&vdd_cpu>;
90 vcc-supply = <&vdd10_lcd>;
91 vccio-supply = <&vcc18_lcd>;
96 mali-supply = <&vdd_gpu>;
100 clock-frequency = <400000>;
103 compatible = "silergy,syr827";
104 fcs,suspend-voltage-selector = <1>;
106 regulator-name = "vdd_cpu";
107 regulator-min-microvolt = <850000>;
108 regulator-max-microvolt = <1350000>;
111 regulator-enable-ramp-delay = <300>;
112 regulator-ramp-delay = <8000>;
113 vin-supply = <&vcc_sys>;
114 regulator-state-mem {
115 regulator-off-in-suspend;
120 compatible = "silergy,syr828";
121 fcs,suspend-voltage-selector = <1>;
123 regulator-name = "vdd_gpu";
124 regulator-min-microvolt = <850000>;
125 regulator-max-microvolt = <1350000>;
127 regulator-ramp-delay = <6000>;
128 vin-supply = <&vcc_sys>;
129 regulator-state-mem {
130 regulator-off-in-suspend;
134 hym8563: hym8563@51 {
135 compatible = "haoyu,hym8563";
138 interrupt-parent = <&gpio0>;
139 interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pmic_int>;
145 clock-output-names = "xin32k";
148 act8846: act8846@5a {
149 compatible = "active-semi,act8846";
153 vp1-supply = <&vcc_sys>;
154 vp2-supply = <&vcc_sys>;
155 vp3-supply = <&vcc_sys>;
156 vp4-supply = <&vcc_sys>;
157 inl1-supply = <&vcc_io>;
158 inl2-supply = <&vcc_sys>;
159 inl3-supply = <&vcc_20>;
163 regulator-name = "VCC_DDR";
164 regulator-min-microvolt = <1200000>;
165 regulator-max-microvolt = <1200000>;
170 regulator-name = "VCC_IO";
171 regulator-min-microvolt = <3300000>;
172 regulator-max-microvolt = <3300000>;
177 regulator-name = "VDD_LOG";
178 regulator-min-microvolt = <1150000>;
179 regulator-max-microvolt = <1150000>;
184 regulator-name = "VCC_20";
185 regulator-min-microvolt = <2000000>;
186 regulator-max-microvolt = <2000000>;
191 regulator-name = "VCCIO_SD";
192 regulator-min-microvolt = <1800000>;
193 regulator-max-microvolt = <3300000>;
198 regulator-name = "VDD10_LCD";
199 regulator-min-microvolt = <1000000>;
200 regulator-max-microvolt = <1000000>;
205 regulator-name = "VCCA_CODEC";
206 regulator-min-microvolt = <3300000>;
207 regulator-max-microvolt = <3300000>;
212 regulator-name = "VCCA_TP";
213 regulator-min-microvolt = <3300000>;
214 regulator-max-microvolt = <3300000>;
219 regulator-name = "VCCIO_PMU";
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
226 regulator-name = "VDD_10";
227 regulator-min-microvolt = <1000000>;
228 regulator-max-microvolt = <1000000>;
233 regulator-name = "VCC_18";
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
240 regulator-name = "VCC18_LCD";
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <1800000>;
250 power-supply = <&vcc_lcd>;
255 clock-frequency = <400000>;
258 compatible = "invensense,mpu6050";
260 pinctrl-names = "default";
261 pinctrl-0 = <&mpu6050_irq_gpio>;
263 irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
264 mpu-int_config = <0x10>;
265 mpu-level_shifter = <0>;
266 mpu-orientation = <0 1 0 1 0 0 0 0 1>;
270 support-hw-poweroff = <1>;
276 power-supply = <&vcc_lcd>;
282 rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
288 rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>;
293 mpu6050_irq_gpio: mpu6050-irq-gpio {
294 rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_none>;