2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
42 #include "rk3288.dtsi"
45 compatible = "rockchip,rk3288-miniarm", "rockchip,rk3288";
48 device_type = "memory";
49 reg = <0x0 0x80000000>;
52 ext_gmac: external-gmac-clock {
53 compatible = "fixed-clock";
54 clock-frequency = <125000000>;
55 clock-output-names = "ext_gmac";
60 compatible = "gpio-keys";
65 pinctrl-names = "default";
66 pinctrl-0 = <&pwrbtn>;
69 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
71 label = "GPIO Key Power";
72 linux,input-type = <1>;
73 gpio-key,wakeup = <1>;
74 debounce-interval = <100>;
79 compatible = "gpio-leds";
82 gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
83 linux,default-trigger = "default-on";
87 gpios=<&gpio2 3 GPIO_ACTIVE_LOW>;
88 linux,default-trigger="mmc0";
93 compatible = "simple-audio-card";
94 simple-audio-card,format = "i2s";
95 simple-audio-card,name = "rockchip,miniarm-codec";
96 simple-audio-card,mclk-fs = <512>;
97 simple-audio-card,cpu {
100 simple-audio-card,codec {
105 vcc_sys: vsys-regulator {
106 compatible = "regulator-fixed";
107 regulator-name = "vcc_sys";
108 regulator-min-microvolt = <5000000>;
109 regulator-max-microvolt = <5000000>;
115 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
116 * vcc_io directly. Those boards won't be able to power cycle SD cards
117 * but it shouldn't hurt to toggle this pin there anyway.
119 vcc_sd: sdmmc-regulator {
120 compatible = "regulator-fixed";
121 gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&sdmmc_pwr>;
124 regulator-name = "vcc_sd";
125 regulator-min-microvolt = <3300000>;
126 regulator-max-microvolt = <3300000>;
127 startup-delay-us = <100000>;
128 vin-supply = <&vcc_io>;
133 cpu0-supply = <&vdd_cpu>;
137 phy-supply = <&vcc33_lan>;
139 clock_in_out = "input";
140 snps,reset-gpio = <&gpio4 7 0>;
141 snps,reset-active-low;
142 snps,reset-delays-us = <0 10000 1000000>;
143 assigned-clocks = <&cru SCLK_MAC>;
144 assigned-clock-parents = <&ext_gmac>;
145 pinctrl-names = "default";
146 pinctrl-0 = <&rgmii_pins>;
153 mali-supply = <&vdd_gpu>;
158 #address-cells = <1>;
160 #sound-dai-cells = <0>;
161 ddc-i2c-bus = <&i2c5>;
163 /* Don't use vopl for HDMI */
166 /delete-node/ endpoint@1;
177 clock-frequency = <400000>;
180 compatible = "rockchip,rk808";
182 interrupt-parent = <&gpio0>;
183 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
186 dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
187 <&gpio0 12 GPIO_ACTIVE_HIGH>;
189 rockchip,system-power-controller;
192 clock-output-names = "xin32k", "rk808-clkout2";
194 vcc1-supply = <&vcc_sys>;
195 vcc2-supply = <&vcc_sys>;
196 vcc3-supply = <&vcc_sys>;
197 vcc4-supply = <&vcc_sys>;
198 vcc6-supply = <&vcc_sys>;
199 vcc7-supply = <&vcc_sys>;
200 vcc8-supply = <&vcc_18>;
201 vcc9-supply = <&vcc_io>;
202 vcc10-supply = <&vcc_io>;
203 vcc11-supply = <&vcc_sys>;
204 vcc12-supply = <&vcc_io>;
205 vddio-supply = <&vcc18_ldo1>;
211 regulator-min-microvolt = <750000>;
212 regulator-max-microvolt = <1350000>;
213 regulator-name = "vdd_arm";
214 regulator-ramp-delay = <6000>;
215 regulator-state-mem {
216 regulator-off-in-suspend;
223 regulator-min-microvolt = <850000>;
224 regulator-max-microvolt = <1250000>;
225 regulator-name = "vdd_gpu";
226 regulator-ramp-delay = <6000>;
227 regulator-state-mem {
228 regulator-on-in-suspend;
229 regulator-suspend-microvolt = <1000000>;
236 regulator-name = "vcc_ddr";
237 regulator-state-mem {
238 regulator-on-in-suspend;
245 regulator-min-microvolt = <3300000>;
246 regulator-max-microvolt = <3300000>;
247 regulator-name = "vcc_io";
248 regulator-state-mem {
249 regulator-on-in-suspend;
250 regulator-suspend-microvolt = <3300000>;
254 vcc18_ldo1: LDO_REG1 {
257 regulator-min-microvolt = <1800000>;
258 regulator-max-microvolt = <1800000>;
259 regulator-name = "vcc18_ldo1";
260 regulator-state-mem {
261 regulator-on-in-suspend;
262 regulator-suspend-microvolt = <1800000>;
266 vcc33_mipi: LDO_REG2 {
269 regulator-min-microvolt = <3300000>;
270 regulator-max-microvolt = <3300000>;
271 regulator-name = "vcc33_mipi";
272 regulator-state-mem {
273 regulator-off-in-suspend;
280 regulator-min-microvolt = <1000000>;
281 regulator-max-microvolt = <1000000>;
282 regulator-name = "vdd_10";
283 regulator-state-mem {
284 regulator-on-in-suspend;
285 regulator-suspend-microvolt = <1000000>;
289 vcc18_codec: LDO_REG4 {
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <1800000>;
294 regulator-name = "vcc18_codec";
295 regulator-state-mem {
296 regulator-on-in-suspend;
297 regulator-suspend-microvolt = <1800000>;
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <3300000>;
306 regulator-name = "vccio_sd";
307 regulator-state-mem {
308 regulator-on-in-suspend;
309 regulator-suspend-microvolt = <3300000>;
313 vdd10_lcd: LDO_REG6 {
316 regulator-min-microvolt = <1000000>;
317 regulator-max-microvolt = <1000000>;
318 regulator-name = "vdd10_lcd";
319 regulator-state-mem {
320 regulator-on-in-suspend;
321 regulator-suspend-microvolt = <1000000>;
328 regulator-min-microvolt = <1800000>;
329 regulator-max-microvolt = <1800000>;
330 regulator-name = "vcc_18";
331 regulator-state-mem {
332 regulator-on-in-suspend;
333 regulator-suspend-microvolt = <1800000>;
337 vcc18_lcd: LDO_REG8 {
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <1800000>;
342 regulator-name = "vcc18_lcd";
343 regulator-state-mem {
344 regulator-on-in-suspend;
345 regulator-suspend-microvolt = <1800000>;
349 vcc33_sd: SWITCH_REG1 {
352 regulator-name = "vcc33_sd";
353 regulator-state-mem {
354 regulator-on-in-suspend;
358 vcc33_lan: SWITCH_REG2 {
361 regulator-name = "vcc33_lan";
362 regulator-state-mem {
363 regulator-on-in-suspend;
379 #sound-dai-cells = <0>;
386 sdcard-supply = <&vccio_sd>;
398 vref-supply = <&vcc18_ldo1>;
406 card-detect-delay = <200>;
407 disable-wp; /* wp not hooked up */
409 pinctrl-names = "default";
410 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
413 vmmc-supply = <&vcc_sd>;
414 vqmmc-supply = <&vccio_sd>;
418 rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
419 rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
470 /* Don't use vopl for HDMI */
472 /delete-node/ endpoint@0;
489 pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
490 drive-strength = <8>;
493 pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
495 drive-strength = <8>;
500 rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
506 rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
511 eth_phy_pwr: eth-phy-pwr {
512 rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
518 rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
522 rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO &pcfg_pull_down>;
526 rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO &pcfg_pull_down>;
532 * Default drive strength isn't enough to achieve even
533 * high-speed mode on EVB board so bump up to 8ma.
535 sdmmc_bus4: sdmmc-bus4 {
536 rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
537 <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
538 <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
539 <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
542 sdmmc_clk: sdmmc-clk {
543 rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
546 sdmmc_cmd: sdmmc-cmd {
547 rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
550 sdmmc_pwr: sdmmc-pwr {
551 rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
556 host_vbus_drv: host-vbus-drv {
557 rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
561 rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;