2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
4 * Hans de Goede <hdegoede@redhat.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public
22 * License along with this file; if not, write to the Free
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
51 /include/ "sun7i-a20.dtsi"
52 /include/ "sunxi-common-regulators.dtsi"
55 model = "LeMaker Banana Pi";
56 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
60 pinctrl-names = "default";
61 pinctrl-0 = <&spi0_pins_a>;
66 pinctrl-names = "default";
67 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
68 vmmc-supply = <®_vcc3v3>;
70 cd-gpios = <&pio 7 10 0>; /* PH10 */
75 usbphy: phy@01c13400 {
76 usb1_vbus-supply = <®_usb1_vbus>;
77 usb2_vbus-supply = <®_usb2_vbus>;
102 mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
103 allwinner,pins = "PH10";
104 allwinner,function = "gpio_in";
105 allwinner,drive = <0>;
106 allwinner,pull = <1>;
109 gmac_power_pin_bananapi: gmac_power_pin@0 {
110 allwinner,pins = "PH23";
111 allwinner,function = "gpio_out";
112 allwinner,drive = <0>;
113 allwinner,pull = <0>;
116 led_pins_bananapi: led_pins@0 {
117 allwinner,pins = "PH24";
118 allwinner,function = "gpio_out";
119 allwinner,drive = <0>;
120 allwinner,pull = <0>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&ir0_pins_a>;
130 uart0: serial@01c28000 {
131 pinctrl-names = "default";
132 pinctrl-0 = <&uart0_pins_a>;
136 uart3: serial@01c28c00 {
137 pinctrl-names = "default";
138 pinctrl-0 = <&uart3_pins_b>;
142 uart7: serial@01c29c00 {
143 pinctrl-names = "default";
144 pinctrl-0 = <&uart7_pins_a>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&i2c0_pins_a>;
154 compatible = "x-powers,axp209";
156 interrupt-parent = <&nmi_intc>;
159 interrupt-controller;
160 #interrupt-cells = <1>;
165 pinctrl-names = "default";
166 pinctrl-0 = <&i2c2_pins_a>;
170 gmac: ethernet@01c50000 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&gmac_pins_rgmii_a>;
175 phy-supply = <®_gmac_3v3>;
178 phy1: ethernet-phy@1 {
185 compatible = "gpio-leds";
186 pinctrl-names = "default";
187 pinctrl-0 = <&led_pins_bananapi>;
190 label = "bananapi:green:usr";
191 gpios = <&pio 7 24 0>;
195 reg_usb1_vbus: usb1-vbus {
199 reg_usb2_vbus: usb2-vbus {
203 reg_gmac_3v3: gmac-3v3 {
204 compatible = "regulator-fixed";
205 pinctrl-names = "default";
206 pinctrl-0 = <&gmac_power_pin_bananapi>;
207 regulator-name = "gmac-3v3";
208 regulator-min-microvolt = <3300000>;
209 regulator-max-microvolt = <3300000>;
210 startup-delay-us = <100000>;
212 gpio = <&pio 7 23 0>;