2 * mach-imx27_visstrim_m10.c
4 * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com>
6 * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
24 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26 #include <linux/platform_device.h>
27 #include <linux/mtd/physmap.h>
28 #include <linux/i2c.h>
29 #include <linux/i2c/pca953x.h>
30 #include <linux/input.h>
31 #include <linux/gpio.h>
32 #include <linux/delay.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/leds.h>
35 #include <linux/platform_data/asoc-mx27vis.h>
36 #include <media/soc_camera.h>
37 #include <sound/tlv320aic32x4.h>
38 #include <asm/mach-types.h>
39 #include <asm/mach/arch.h>
40 #include <asm/mach/time.h>
41 #include <asm/system_info.h>
42 #include <asm/memblock.h>
43 #include <mach/common.h>
44 #include <mach/hardware.h>
45 #include <mach/iomux-mx27.h>
47 #include "devices-imx27.h"
49 #define TVP5150_RSTN (GPIO_PORTC + 18)
50 #define TVP5150_PWDN (GPIO_PORTC + 19)
51 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
52 #define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
54 #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
55 #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
56 #define MOTHERBOARD_BIT0 (GPIO_PORTD + 29)
58 #define EXPBOARD_BIT2 (GPIO_PORTD + 25)
59 #define EXPBOARD_BIT1 (GPIO_PORTD + 27)
60 #define EXPBOARD_BIT0 (GPIO_PORTD + 28)
62 #define AMP_GAIN_0 (GPIO_PORTF + 9)
63 #define AMP_GAIN_1 (GPIO_PORTF + 8)
64 #define AMP_MUTE_SDL (GPIO_PORTE + 5)
65 #define AMP_MUTE_SDR (GPIO_PORTF + 7)
67 static const int visstrim_m10_pins[] __initconst = {
110 OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
112 PC11_PF_USBOTG_DATA1,
113 PC10_PF_USBOTG_DATA2,
114 PC13_PF_USBOTG_DATA3,
115 PC12_PF_USBOTG_DATA4,
118 PE25_PF_USBOTG_DATA7,
126 TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
127 TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
140 /* mother board version */
141 MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
142 MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
143 MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
144 /* expansion board version */
145 EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
146 EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
147 EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
148 /* Audio AMP control */
149 AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
150 AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
151 AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
152 AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
155 static struct gpio visstrim_m10_version_gpios[] = {
156 { EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
157 { EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
158 { EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
159 { MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
160 { MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
161 { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
164 static const struct gpio visstrim_m10_gpios[] __initconst = {
166 .gpio = TVP5150_RSTN,
167 .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
168 .label = "tvp5150_rstn",
171 .gpio = TVP5150_PWDN,
172 .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
173 .label = "tvp5150_pwdn",
176 .gpio = OTG_PHY_CS_GPIO,
177 .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
178 .label = "usbotg_cs",
182 .flags = GPIOF_DIR_OUT,
183 .label = "amp-gain-0",
187 .flags = GPIOF_DIR_OUT,
188 .label = "amp-gain-1",
191 .gpio = AMP_MUTE_SDL,
192 .flags = GPIOF_DIR_OUT,
193 .label = "amp-mute-sdl",
196 .gpio = AMP_MUTE_SDR,
197 .flags = GPIOF_DIR_OUT,
198 .label = "amp-mute-sdr",
203 static int visstrim_camera_power(struct device *dev, int on)
205 gpio_set_value(TVP5150_PWDN, on);
210 static int visstrim_camera_reset(struct device *dev)
212 gpio_set_value(TVP5150_RSTN, 0);
214 gpio_set_value(TVP5150_RSTN, 1);
219 static struct i2c_board_info visstrim_i2c_camera = {
220 I2C_BOARD_INFO("tvp5150", 0x5d),
223 static struct soc_camera_link iclink_tvp5150 = {
225 .board_info = &visstrim_i2c_camera,
227 .power = visstrim_camera_power,
228 .reset = visstrim_camera_reset,
231 static struct mx2_camera_platform_data visstrim_camera = {
232 .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
233 MX2_CAMERA_PCLK_SAMPLE_RISING,
237 static phys_addr_t mx2_camera_base __initdata;
238 #define MX2_CAMERA_BUF_SIZE SZ_8M
240 static void __init visstrim_camera_init(void)
242 struct platform_device *pdev;
245 gpio_set_value(TVP5150_PWDN, 1);
247 gpio_set_value(TVP5150_RSTN, 0);
249 gpio_set_value(TVP5150_RSTN, 1);
252 pdev = imx27_add_mx2_camera(&visstrim_camera);
256 dma = dma_declare_coherent_memory(&pdev->dev,
257 mx2_camera_base, mx2_camera_base,
259 DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
260 if (!(dma & DMA_MEMORY_MAP))
264 static void __init visstrim_reserve(void)
266 /* reserve 4 MiB for mx2-camera */
267 mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE,
268 MX2_CAMERA_BUF_SIZE);
271 /* GPIOs used as events for applications */
272 static struct gpio_keys_button visstrim_gpio_keys[] = {
276 .gpio = (GPIO_PORTC + 15),
277 .desc = "Default config",
284 .gpio = (GPIO_PORTF + 14),
292 .gpio = (GPIO_PORTF + 13),
299 static const struct gpio_keys_platform_data
300 visstrim_gpio_keys_platform_data __initconst = {
301 .buttons = visstrim_gpio_keys,
302 .nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
306 static const struct gpio_led visstrim_m10_leds[] __initconst = {
308 .name = "visstrim:ld0",
309 .default_trigger = "nand-disk",
310 .gpio = (GPIO_PORTC + 29),
313 .name = "visstrim:ld1",
314 .default_trigger = "nand-disk",
315 .gpio = (GPIO_PORTC + 24),
318 .name = "visstrim:ld2",
319 .default_trigger = "nand-disk",
320 .gpio = (GPIO_PORTC + 28),
323 .name = "visstrim:ld3",
324 .default_trigger = "nand-disk",
325 .gpio = (GPIO_PORTC + 25),
329 static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = {
330 .leds = visstrim_m10_leds,
331 .num_leds = ARRAY_SIZE(visstrim_m10_leds),
334 /* Visstrim_SM10 has a microSD slot connected to sdhc1 */
335 static int visstrim_m10_sdhc1_init(struct device *dev,
336 irq_handler_t detect_irq, void *data)
340 ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
341 IRQF_TRIGGER_FALLING, "mmc-detect", data);
345 static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
347 free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
350 static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
351 .init = visstrim_m10_sdhc1_init,
352 .exit = visstrim_m10_sdhc1_exit,
355 /* Visstrim_SM10 NOR flash */
356 static struct physmap_flash_data visstrim_m10_flash_data = {
360 static struct resource visstrim_m10_flash_resource = {
362 .end = 0xc0000000 + SZ_64M - 1,
363 .flags = IORESOURCE_MEM,
366 static struct platform_device visstrim_m10_nor_mtd_device = {
367 .name = "physmap-flash",
370 .platform_data = &visstrim_m10_flash_data,
373 .resource = &visstrim_m10_flash_resource,
376 static struct platform_device *platform_devices[] __initdata = {
377 &visstrim_m10_nor_mtd_device,
380 /* Visstrim_M10 uses UART0 as console */
381 static const struct imxuart_platform_data uart_pdata __initconst = {
382 .flags = IMXUART_HAVE_RTSCTS,
386 static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
390 static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
391 .gpio_base = 240, /* After MX27 internal GPIOs */
395 static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
396 .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
397 AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
398 AIC32X4_PWR_AIC32X4_LDO_ENABLE |
399 AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
400 AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
401 .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
402 AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
406 static struct i2c_board_info visstrim_m10_i2c_devices[] = {
408 I2C_BOARD_INFO("pca9555", 0x20),
409 .platform_data = &visstrim_m10_pca9555_pdata,
412 I2C_BOARD_INFO("tlv320aic32x4", 0x18),
413 .platform_data = &visstrim_m10_aic32x4_pdata,
416 I2C_BOARD_INFO("m41t00", 0x68),
421 static int otg_phy_init(struct platform_device *pdev)
423 return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
426 static const struct mxc_usbh_platform_data
427 visstrim_m10_usbotg_pdata __initconst = {
428 .init = otg_phy_init,
429 .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
433 static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
434 .flags = IMX_SSI_DMA | IMX_SSI_SYN,
439 static void __init visstrim_coda_init(void)
441 struct platform_device *pdev;
444 pdev = imx27_add_coda();
445 dma = dma_declare_coherent_memory(&pdev->dev,
446 mx2_camera_base + MX2_CAMERA_BUF_SIZE,
447 mx2_camera_base + MX2_CAMERA_BUF_SIZE,
449 DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
450 if (!(dma & DMA_MEMORY_MAP))
454 /* DMA deinterlace */
455 static struct platform_device visstrim_deinterlace = {
456 .name = "m2m-deinterlace",
460 static void __init visstrim_deinterlace_init(void)
463 struct platform_device *pdev = &visstrim_deinterlace;
466 ret = platform_device_register(pdev);
468 dma = dma_declare_coherent_memory(&pdev->dev,
469 mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
470 mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
472 DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
473 if (!(dma & DMA_MEMORY_MAP))
479 static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
480 .amp_gain0_gpio = AMP_GAIN_0,
481 .amp_gain1_gpio = AMP_GAIN_1,
482 .amp_mutel_gpio = AMP_MUTE_SDL,
483 .amp_muter_gpio = AMP_MUTE_SDR,
486 static void __init visstrim_m10_revision(void)
492 ret = gpio_request_array(visstrim_m10_version_gpios,
493 ARRAY_SIZE(visstrim_m10_version_gpios));
495 pr_err("Failed to request version gpios");
499 /* Get expansion board version (negative logic) */
500 exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
501 exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
502 exp_version |= !gpio_get_value(EXPBOARD_BIT0);
504 /* Get mother board version (negative logic) */
505 mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
506 mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
507 mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
509 system_rev = 0x27000;
510 system_rev |= (mo_version << 4);
511 system_rev |= exp_version;
514 static void __init visstrim_m10_board_init(void)
519 visstrim_m10_revision();
521 ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
522 ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
524 pr_err("Failed to setup pins (%d)\n", ret);
526 ret = gpio_request_array(visstrim_m10_gpios,
527 ARRAY_SIZE(visstrim_m10_gpios));
529 pr_err("Failed to request gpios (%d)\n", ret);
531 imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
532 imx27_add_imx_uart0(&uart_pdata);
534 imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
535 imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
536 i2c_register_board_info(0, visstrim_m10_i2c_devices,
537 ARRAY_SIZE(visstrim_m10_i2c_devices));
539 imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
540 imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
542 imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
543 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
544 imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
545 sizeof(snd_mx27vis_pdata));
546 platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
547 &iclink_tvp5150, sizeof(iclink_tvp5150));
548 gpio_led_register_device(0, &visstrim_m10_led_data);
549 visstrim_deinterlace_init();
550 visstrim_camera_init();
551 visstrim_coda_init();
554 static void __init visstrim_m10_timer_init(void)
556 mx27_clocks_init((unsigned long)25000000);
559 static struct sys_timer visstrim_m10_timer = {
560 .init = visstrim_m10_timer_init,
563 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
564 .atag_offset = 0x100,
565 .reserve = visstrim_reserve,
566 .map_io = mx27_map_io,
567 .init_early = imx27_init_early,
568 .init_irq = mx27_init_irq,
569 .handle_irq = imx27_handle_irq,
570 .timer = &visstrim_m10_timer,
571 .init_machine = visstrim_m10_board_init,
572 .restart = mxc_restart,