2 * linux/arch/arm/mach-omap2/board-3430sdp.c
4 * Copyright (C) 2007 Texas Instruments
6 * Modified from mach-omap2/board-generic.c
8 * Initial code: Syed Mohammed Khasim
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/delay.h>
19 #include <linux/input.h>
20 #include <linux/input/matrix_keypad.h>
21 #include <linux/spi/spi.h>
22 #include <linux/spi/ads7846.h>
23 #include <linux/i2c/twl.h>
24 #include <linux/regulator/machine.h>
26 #include <linux/gpio.h>
27 #include <linux/mmc/host.h>
29 #include <mach/hardware.h>
30 #include <asm/mach-types.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/map.h>
34 #include <plat/mcspi.h>
35 #include <plat/board.h>
37 #include <plat/common.h>
39 #include <plat/gpmc.h>
40 #include <plat/display.h>
41 #include <plat/panel-generic-dpi.h>
43 #include <plat/gpmc-smc91x.h>
45 #include "board-flash.h"
47 #include "sdram-qimonda-hyb18m512160af-6.h"
52 #define CONFIG_DISABLE_HFCLK 1
54 #define SDP3430_TS_GPIO_IRQ_SDPV1 3
55 #define SDP3430_TS_GPIO_IRQ_SDPV2 2
57 #define ENABLE_VAUX3_DEDICATED 0x03
58 #define ENABLE_VAUX3_DEV_GRP 0x20
60 #define TWL4030_MSECURE_GPIO 22
62 /* FIXME: These values need to be updated based on more profiling on 3430sdp*/
63 static struct cpuidle_params omap3_cpuidle_params_table[] = {
71 {1, 1500, 1800, 4000},
73 {1, 2500, 7500, 12000},
75 {1, 3000, 8500, 15000},
77 {1, 10000, 30000, 300000},
80 static uint32_t board_keymap[] = {
114 static struct matrix_keymap_data board_map_data = {
115 .keymap = board_keymap,
116 .keymap_size = ARRAY_SIZE(board_keymap),
119 static struct twl4030_keypad_data sdp3430_kp_data = {
120 .keymap_data = &board_map_data,
126 static int ts_gpio; /* Needed for ads7846_get_pendown_state */
129 * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
131 * @return - void. If request gpio fails then Flag KERN_ERR.
133 static void ads7846_dev_init(void)
135 if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
136 printk(KERN_ERR "can't get ads746 pen down GPIO\n");
140 gpio_direction_input(ts_gpio);
141 gpio_set_debounce(ts_gpio, 310);
144 static int ads7846_get_pendown_state(void)
146 return !gpio_get_value(ts_gpio);
149 static struct ads7846_platform_data tsc2046_config __initdata = {
150 .get_pendown_state = ads7846_get_pendown_state,
156 static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
158 .single_channel = 1, /* 0: slave, 1: master */
161 static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
164 * TSC2046 operates at a max freqency of 2MHz, so
165 * operate slightly below at 1.5MHz
167 .modalias = "ads7846",
170 .max_speed_hz = 1500000,
171 .controller_data = &tsc2046_mcspi_config,
173 .platform_data = &tsc2046_config,
178 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
179 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5
181 static unsigned backlight_gpio;
182 static unsigned enable_gpio;
183 static int lcd_enabled;
184 static int dvi_enabled;
186 static void __init sdp3430_display_init(void)
190 enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
191 backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
193 r = gpio_request(enable_gpio, "LCD reset");
195 printk(KERN_ERR "failed to get LCD reset GPIO\n");
199 r = gpio_request(backlight_gpio, "LCD Backlight");
201 printk(KERN_ERR "failed to get LCD backlight GPIO\n");
205 gpio_direction_output(enable_gpio, 0);
206 gpio_direction_output(backlight_gpio, 0);
210 gpio_free(enable_gpio);
215 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
218 printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
222 gpio_direction_output(enable_gpio, 1);
223 gpio_direction_output(backlight_gpio, 1);
230 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
234 gpio_direction_output(enable_gpio, 0);
235 gpio_direction_output(backlight_gpio, 0);
238 static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
241 printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
250 static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
255 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
260 static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
265 static struct omap_dss_device sdp3430_lcd_device = {
267 .driver_name = "sharp_ls_panel",
268 .type = OMAP_DISPLAY_TYPE_DPI,
269 .phy.dpi.data_lines = 16,
270 .platform_enable = sdp3430_panel_enable_lcd,
271 .platform_disable = sdp3430_panel_disable_lcd,
274 static struct panel_generic_dpi_data dvi_panel = {
276 .platform_enable = sdp3430_panel_enable_dvi,
277 .platform_disable = sdp3430_panel_disable_dvi,
280 static struct omap_dss_device sdp3430_dvi_device = {
282 .type = OMAP_DISPLAY_TYPE_DPI,
283 .driver_name = "generic_dpi_panel",
285 .phy.dpi.data_lines = 24,
288 static struct omap_dss_device sdp3430_tv_device = {
290 .driver_name = "venc",
291 .type = OMAP_DISPLAY_TYPE_VENC,
292 .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
293 .platform_enable = sdp3430_panel_enable_tv,
294 .platform_disable = sdp3430_panel_disable_tv,
298 static struct omap_dss_device *sdp3430_dss_devices[] = {
304 static struct omap_dss_board_info sdp3430_dss_data = {
305 .num_devices = ARRAY_SIZE(sdp3430_dss_devices),
306 .devices = sdp3430_dss_devices,
307 .default_device = &sdp3430_lcd_device,
310 static struct regulator_consumer_supply sdp3430_vdda_dac_supply =
311 REGULATOR_SUPPLY("vdda_dac", "omapdss");
313 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
316 static void __init omap_3430sdp_init_early(void)
318 omap_board_config = sdp3430_config;
319 omap_board_config_size = ARRAY_SIZE(sdp3430_config);
320 omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
321 omap2_init_common_infrastructure();
322 omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
325 static int sdp3430_batt_table[] = {
327 30800, 29500, 28300, 27100,
328 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
329 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
330 11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
331 8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
332 5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
333 4040, 3910, 3790, 3670, 3550
336 static struct twl4030_bci_platform_data sdp3430_bci_data = {
337 .battery_tmp_tbl = sdp3430_batt_table,
338 .tblsize = ARRAY_SIZE(sdp3430_batt_table),
341 static struct omap2_hsmmc_info mmc[] = {
344 /* 8 bits (default) requires S6.3 == ON,
345 * so the SIM card isn't used; else 4 bits.
347 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
352 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
358 static int sdp3430_twl_gpio_setup(struct device *dev,
359 unsigned gpio, unsigned ngpio)
361 /* gpio + 0 is "mmc0_cd" (input/IRQ),
362 * gpio + 1 is "mmc1_cd" (input/IRQ)
364 mmc[0].gpio_cd = gpio + 0;
365 mmc[1].gpio_cd = gpio + 1;
366 omap2_hsmmc_init(mmc);
368 /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
369 gpio_request(gpio + 7, "sub_lcd_en_bkl");
370 gpio_direction_output(gpio + 7, 0);
372 /* gpio + 15 is "sub_lcd_nRST" (output) */
373 gpio_request(gpio + 15, "sub_lcd_nRST");
374 gpio_direction_output(gpio + 15, 0);
379 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
380 .gpio_base = OMAP_MAX_GPIO_LINES,
381 .irq_base = TWL4030_GPIO_IRQ_BASE,
382 .irq_end = TWL4030_GPIO_IRQ_END,
383 .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
385 .setup = sdp3430_twl_gpio_setup,
388 static struct twl4030_usb_data sdp3430_usb_data = {
389 .usb_mode = T2_USB_MODE_ULPI,
392 static struct twl4030_madc_platform_data sdp3430_madc_data = {
396 /* regulator consumer mappings */
399 static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
400 REGULATOR_SUPPLY("vcc", "spi1.0"),
403 static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
404 REGULATOR_SUPPLY("vdda_dac", "omapdss"),
407 /* VPLL2 for digital video outputs */
408 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
409 REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
412 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
413 REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"),
416 static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
417 REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.0"),
420 static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
421 REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
425 * Apply all the fixed voltages since most versions of U-Boot
426 * don't bother with that initialization.
429 /* VAUX1 for mainboard (irda and sub-lcd) */
430 static struct regulator_init_data sdp3430_vaux1 = {
435 .valid_modes_mask = REGULATOR_MODE_NORMAL
436 | REGULATOR_MODE_STANDBY,
437 .valid_ops_mask = REGULATOR_CHANGE_MODE
438 | REGULATOR_CHANGE_STATUS,
442 /* VAUX2 for camera module */
443 static struct regulator_init_data sdp3430_vaux2 = {
448 .valid_modes_mask = REGULATOR_MODE_NORMAL
449 | REGULATOR_MODE_STANDBY,
450 .valid_ops_mask = REGULATOR_CHANGE_MODE
451 | REGULATOR_CHANGE_STATUS,
455 /* VAUX3 for LCD board */
456 static struct regulator_init_data sdp3430_vaux3 = {
461 .valid_modes_mask = REGULATOR_MODE_NORMAL
462 | REGULATOR_MODE_STANDBY,
463 .valid_ops_mask = REGULATOR_CHANGE_MODE
464 | REGULATOR_CHANGE_STATUS,
466 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies),
467 .consumer_supplies = sdp3430_vaux3_supplies,
470 /* VAUX4 for OMAP VDD_CSI2 (camera) */
471 static struct regulator_init_data sdp3430_vaux4 = {
476 .valid_modes_mask = REGULATOR_MODE_NORMAL
477 | REGULATOR_MODE_STANDBY,
478 .valid_ops_mask = REGULATOR_CHANGE_MODE
479 | REGULATOR_CHANGE_STATUS,
483 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
484 static struct regulator_init_data sdp3430_vmmc1 = {
488 .valid_modes_mask = REGULATOR_MODE_NORMAL
489 | REGULATOR_MODE_STANDBY,
490 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
491 | REGULATOR_CHANGE_MODE
492 | REGULATOR_CHANGE_STATUS,
494 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies),
495 .consumer_supplies = sdp3430_vmmc1_supplies,
498 /* VMMC2 for MMC2 card */
499 static struct regulator_init_data sdp3430_vmmc2 = {
504 .valid_modes_mask = REGULATOR_MODE_NORMAL
505 | REGULATOR_MODE_STANDBY,
506 .valid_ops_mask = REGULATOR_CHANGE_MODE
507 | REGULATOR_CHANGE_STATUS,
509 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies),
510 .consumer_supplies = sdp3430_vmmc2_supplies,
513 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
514 static struct regulator_init_data sdp3430_vsim = {
518 .valid_modes_mask = REGULATOR_MODE_NORMAL
519 | REGULATOR_MODE_STANDBY,
520 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
521 | REGULATOR_CHANGE_MODE
522 | REGULATOR_CHANGE_STATUS,
524 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies),
525 .consumer_supplies = sdp3430_vsim_supplies,
528 /* VDAC for DSS driving S-Video */
529 static struct regulator_init_data sdp3430_vdac = {
534 .valid_modes_mask = REGULATOR_MODE_NORMAL
535 | REGULATOR_MODE_STANDBY,
536 .valid_ops_mask = REGULATOR_CHANGE_MODE
537 | REGULATOR_CHANGE_STATUS,
539 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies),
540 .consumer_supplies = sdp3430_vdda_dac_supplies,
543 static struct regulator_init_data sdp3430_vpll2 = {
549 .valid_modes_mask = REGULATOR_MODE_NORMAL
550 | REGULATOR_MODE_STANDBY,
551 .valid_ops_mask = REGULATOR_CHANGE_MODE
552 | REGULATOR_CHANGE_STATUS,
554 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
555 .consumer_supplies = sdp3430_vpll2_supplies,
558 static struct twl4030_codec_audio_data sdp3430_audio = {
559 .audio_mclk = 26000000,
562 static struct twl4030_codec_data sdp3430_codec = {
563 .audio_mclk = 26000000,
564 .audio = &sdp3430_audio,
567 static struct twl4030_platform_data sdp3430_twldata = {
568 .irq_base = TWL4030_IRQ_BASE,
569 .irq_end = TWL4030_IRQ_END,
571 /* platform_data for children goes here */
572 .bci = &sdp3430_bci_data,
573 .gpio = &sdp3430_gpio_data,
574 .madc = &sdp3430_madc_data,
575 .keypad = &sdp3430_kp_data,
576 .usb = &sdp3430_usb_data,
577 .codec = &sdp3430_codec,
579 .vaux1 = &sdp3430_vaux1,
580 .vaux2 = &sdp3430_vaux2,
581 .vaux3 = &sdp3430_vaux3,
582 .vaux4 = &sdp3430_vaux4,
583 .vmmc1 = &sdp3430_vmmc1,
584 .vmmc2 = &sdp3430_vmmc2,
585 .vsim = &sdp3430_vsim,
586 .vdac = &sdp3430_vdac,
587 .vpll2 = &sdp3430_vpll2,
590 static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
592 I2C_BOARD_INFO("twl4030", 0x48),
593 .flags = I2C_CLIENT_WAKE,
594 .irq = INT_34XX_SYS_NIRQ,
595 .platform_data = &sdp3430_twldata,
599 static int __init omap3430_i2c_init(void)
601 /* i2c1 for PMIC only */
602 omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
603 ARRAY_SIZE(sdp3430_i2c_boardinfo));
604 /* i2c2 on camera connector (for sensor control) and optional isp1301 */
605 omap_register_i2c_bus(2, 400, NULL, 0);
606 /* i2c3 on display connector (for DVI, tfp410) */
607 omap_register_i2c_bus(3, 400, NULL, 0);
611 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
613 static struct omap_smc91x_platform_data board_smc91x_data = {
615 .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
616 IORESOURCE_IRQ_LOWLEVEL,
619 static void __init board_smc91x_init(void)
621 if (omap_rev() > OMAP3430_REV_ES1_0)
622 board_smc91x_data.gpio_irq = 6;
624 board_smc91x_data.gpio_irq = 29;
626 gpmc_smc91x_init(&board_smc91x_data);
631 static inline void board_smc91x_init(void)
637 static void enable_board_wakeup_source(void)
639 /* T2 interrupt line (keypad) */
640 omap_mux_init_signal("sys_nirq",
641 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
644 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
646 .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
647 .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
648 .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
651 .reset_gpio_port[0] = 57,
652 .reset_gpio_port[1] = 61,
653 .reset_gpio_port[2] = -EINVAL
656 #ifdef CONFIG_OMAP_MUX
657 static struct omap_board_mux board_mux[] __initdata = {
658 { .reg_offset = OMAP_MUX_TERMINATOR },
663 * SDP3430 V2 Board CS organization
664 * Different from SDP3430 V1. Now 4 switches used to specify CS
666 * See also the Switch S8 settings in the comments.
668 static char chip_sel_3430[][GPMC_CS_NUM] = {
669 {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
670 {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
671 {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
674 static struct mtd_partition sdp_nor_partitions[] = {
675 /* bootloader (U-Boot, etc) in first sector */
677 .name = "Bootloader-NOR",
680 .mask_flags = MTD_WRITEABLE, /* force read-only */
682 /* bootloader params in the next sector */
684 .name = "Params-NOR",
685 .offset = MTDPART_OFS_APPEND,
691 .name = "Kernel-NOR",
692 .offset = MTDPART_OFS_APPEND,
698 .name = "Filesystem-NOR",
699 .offset = MTDPART_OFS_APPEND,
700 .size = MTDPART_SIZ_FULL,
705 static struct mtd_partition sdp_onenand_partitions[] = {
707 .name = "X-Loader-OneNAND",
709 .size = 4 * (64 * 2048),
710 .mask_flags = MTD_WRITEABLE /* force read-only */
713 .name = "U-Boot-OneNAND",
714 .offset = MTDPART_OFS_APPEND,
715 .size = 2 * (64 * 2048),
716 .mask_flags = MTD_WRITEABLE /* force read-only */
719 .name = "U-Boot Environment-OneNAND",
720 .offset = MTDPART_OFS_APPEND,
721 .size = 1 * (64 * 2048),
724 .name = "Kernel-OneNAND",
725 .offset = MTDPART_OFS_APPEND,
726 .size = 16 * (64 * 2048),
729 .name = "File System-OneNAND",
730 .offset = MTDPART_OFS_APPEND,
731 .size = MTDPART_SIZ_FULL,
735 static struct mtd_partition sdp_nand_partitions[] = {
736 /* All the partition sizes are listed in terms of NAND block size */
738 .name = "X-Loader-NAND",
740 .size = 4 * (64 * 2048),
741 .mask_flags = MTD_WRITEABLE, /* force read-only */
744 .name = "U-Boot-NAND",
745 .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
746 .size = 10 * (64 * 2048),
747 .mask_flags = MTD_WRITEABLE, /* force read-only */
750 .name = "Boot Env-NAND",
752 .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
753 .size = 6 * (64 * 2048),
756 .name = "Kernel-NAND",
757 .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
758 .size = 40 * (64 * 2048),
761 .name = "File System - NAND",
762 .size = MTDPART_SIZ_FULL,
763 .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
767 static struct flash_partitions sdp_flash_partitions[] = {
769 .parts = sdp_nor_partitions,
770 .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
773 .parts = sdp_onenand_partitions,
774 .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
777 .parts = sdp_nand_partitions,
778 .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
782 static struct omap_musb_board_data musb_board_data = {
783 .interface_type = MUSB_INTERFACE_ULPI,
788 static void __init omap_3430sdp_init(void)
790 omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
792 omap_display_init(&sdp3430_dss_data);
793 if (omap_rev() > OMAP3430_REV_ES1_0)
794 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
796 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
797 sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
798 spi_register_board_info(sdp3430_spi_board_info,
799 ARRAY_SIZE(sdp3430_spi_board_info));
802 usb_musb_init(&musb_board_data);
804 board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
805 sdp3430_display_init();
806 enable_board_wakeup_source();
807 usb_ehci_init(&ehci_pdata);
810 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
811 /* Maintainer: Syed Khasim - Texas Instruments Inc */
812 .boot_params = 0x80000100,
813 .reserve = omap_reserve,
814 .map_io = omap3_map_io,
815 .init_early = omap_3430sdp_init_early,
816 .init_irq = omap_init_irq,
817 .init_machine = omap_3430sdp_init,
818 .timer = &omap_timer,