2 * linux/arch/arm/mach-omap2/board-omap3touchbook.c
4 * Copyright (C) 2009 Always Innovating
6 * Modified from mach-omap2/board-omap3beagleboard.c
8 * Initial code: Grégoire Gentil, Tim Yamin
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/delay.h>
19 #include <linux/err.h>
20 #include <linux/clk.h>
22 #include <linux/leds.h>
23 #include <linux/gpio.h>
24 #include <linux/input.h>
25 #include <linux/gpio_keys.h>
27 #include <linux/mtd/mtd.h>
28 #include <linux/mtd/partitions.h>
29 #include <linux/mtd/nand.h>
30 #include <linux/mmc/host.h>
31 #include <linux/usb/phy.h>
33 #include <linux/platform_data/spi-omap2-mcspi.h>
34 #include <linux/spi/spi.h>
36 #include <linux/spi/ads7846.h>
38 #include <linux/regulator/machine.h>
39 #include <linux/i2c/twl.h>
41 #include <asm/mach-types.h>
42 #include <asm/mach/arch.h>
43 #include <asm/mach/map.h>
44 #include <asm/mach/flash.h>
45 #include <asm/system_info.h>
49 #include <linux/platform_data/mtd-nand-omap2.h>
53 #include "board-flash.h"
54 #include "common-board-devices.h"
56 #include <asm/setup.h>
58 #define OMAP3_AC_GPIO 136
59 #define OMAP3_TS_GPIO 162
60 #define TB_BL_PWM_TIMER 9
61 #define TB_KILL_POWER_GPIO 168
65 static unsigned long touchbook_revision;
67 static struct mtd_partition omap3touchbook_nand_partitions[] = {
68 /* All the partition sizes are listed in terms of NAND block size */
72 .size = 4 * NAND_BLOCK_SIZE,
73 .mask_flags = MTD_WRITEABLE, /* force read-only */
77 .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
78 .size = 15 * NAND_BLOCK_SIZE,
79 .mask_flags = MTD_WRITEABLE, /* force read-only */
83 .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
84 .size = 1 * NAND_BLOCK_SIZE,
88 .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
89 .size = 32 * NAND_BLOCK_SIZE,
92 .name = "File System",
93 .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
94 .size = MTDPART_SIZ_FULL,
98 #include "sdram-micron-mt46h32m32lf-6.h"
100 static struct omap2_hsmmc_info mmc[] = {
103 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
110 static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
111 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
114 static struct regulator_consumer_supply touchbook_vsim_supply[] = {
115 REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
118 static struct gpio_led gpio_leds[];
120 static int touchbook_twl_gpio_setup(struct device *dev,
121 unsigned gpio, unsigned ngpio)
123 /* gpio + 0 is "mmc0_cd" (input/IRQ) */
124 mmc[0].gpio_cd = gpio + 0;
125 omap_hsmmc_late_init(mmc);
127 /* REVISIT: need ehci-omap hooks for external VBUS
128 * power switch and overcurrent detect
130 gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC");
132 /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
133 gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
136 /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
137 gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
142 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
145 .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
146 | BIT(15) | BIT(16) | BIT(17),
147 .setup = touchbook_twl_gpio_setup,
150 static struct regulator_consumer_supply touchbook_vdac_supply[] = {
156 static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
162 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
163 static struct regulator_init_data touchbook_vmmc1 = {
167 .valid_modes_mask = REGULATOR_MODE_NORMAL
168 | REGULATOR_MODE_STANDBY,
169 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
170 | REGULATOR_CHANGE_MODE
171 | REGULATOR_CHANGE_STATUS,
173 .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply),
174 .consumer_supplies = touchbook_vmmc1_supply,
177 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
178 static struct regulator_init_data touchbook_vsim = {
182 .valid_modes_mask = REGULATOR_MODE_NORMAL
183 | REGULATOR_MODE_STANDBY,
184 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
185 | REGULATOR_CHANGE_MODE
186 | REGULATOR_CHANGE_STATUS,
188 .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply),
189 .consumer_supplies = touchbook_vsim_supply,
192 static struct twl4030_platform_data touchbook_twldata = {
193 /* platform_data for children goes here */
194 .gpio = &touchbook_gpio_data,
195 .vmmc1 = &touchbook_vmmc1,
196 .vsim = &touchbook_vsim,
199 static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
201 I2C_BOARD_INFO("bq27200", 0x55),
205 static int __init omap3_touchbook_i2c_init(void)
207 /* Standard TouchBook bus */
208 omap3_pmic_get_config(&touchbook_twldata,
209 TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
210 TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
212 touchbook_twldata.vdac->num_consumer_supplies =
213 ARRAY_SIZE(touchbook_vdac_supply);
214 touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
216 touchbook_twldata.vpll2->constraints.name = "VDVI";
217 touchbook_twldata.vpll2->num_consumer_supplies =
218 ARRAY_SIZE(touchbook_vdvi_supply);
219 touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
221 omap3_pmic_init("twl4030", &touchbook_twldata);
222 /* Additional TouchBook bus */
223 omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
224 ARRAY_SIZE(touchBook_i2c_boardinfo));
229 static struct ads7846_platform_data ads7846_pdata = {
239 .gpio_pendown = OMAP3_TS_GPIO,
243 static struct gpio_led gpio_leds[] = {
245 .name = "touchbook::usr0",
246 .default_trigger = "heartbeat",
250 .name = "touchbook::usr1",
251 .default_trigger = "mmc0",
255 .name = "touchbook::pmu_stat",
256 .gpio = -EINVAL, /* gets replaced */
261 static struct gpio_led_platform_data gpio_led_info = {
263 .num_leds = ARRAY_SIZE(gpio_leds),
266 static struct platform_device leds_gpio = {
270 .platform_data = &gpio_led_info,
274 static struct gpio_keys_button gpio_buttons[] = {
289 static struct gpio_keys_platform_data gpio_key_info = {
290 .buttons = gpio_buttons,
291 .nbuttons = ARRAY_SIZE(gpio_buttons),
294 static struct platform_device keys_gpio = {
298 .platform_data = &gpio_key_info,
302 #ifdef CONFIG_OMAP_MUX
303 static struct omap_board_mux board_mux[] __initdata = {
304 { .reg_offset = OMAP_MUX_TERMINATOR },
308 static struct usbhs_phy_data phy_data[] __initdata = {
316 static struct platform_device *omap3_touchbook_devices[] __initdata = {
321 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
322 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
323 .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
326 static void omap3_touchbook_poweroff(void)
328 int pwr_off = TB_KILL_POWER_GPIO;
330 if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0)
331 printk(KERN_ERR "Unable to get kill power GPIO\n");
334 static int __init early_touchbook_revision(char *p)
339 return strict_strtoul(p, 10, &touchbook_revision);
341 early_param("tbr", early_touchbook_revision);
343 static void __init omap3_touchbook_init(void)
345 omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
347 pm_power_off = omap3_touchbook_poweroff;
349 if (system_rev >= 0x20 && system_rev <= 0x34301000) {
350 omap_mux_init_gpio(23, OMAP_PIN_INPUT);
353 omap_mux_init_gpio(29, OMAP_PIN_INPUT);
355 omap_hsmmc_init(mmc);
357 omap3_touchbook_i2c_init();
358 platform_add_devices(omap3_touchbook_devices,
359 ARRAY_SIZE(omap3_touchbook_devices));
361 omap_sdrc_init(mt46h32m32lf6_sdrc_params,
362 mt46h32m32lf6_sdrc_params);
364 omap_mux_init_gpio(170, OMAP_PIN_INPUT);
365 /* REVISIT leave DVI powered down until it's needed ... */
366 gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
368 /* Touchscreen and accelerometer */
369 omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
370 usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
373 usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
374 usbhs_init(&usbhs_bdata);
375 board_nand_init(omap3touchbook_nand_partitions,
376 ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
377 NAND_BUSWIDTH_16, NULL);
379 /* Ensure SDRC pins are mux'd for self-refresh */
380 omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
381 omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
384 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
385 /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
386 .atag_offset = 0x100,
387 .reserve = omap_reserve,
388 .map_io = omap3_map_io,
389 .init_early = omap3430_init_early,
390 .init_irq = omap3_init_irq,
391 .handle_irq = omap3_intc_handle_irq,
392 .init_machine = omap3_touchbook_init,
393 .init_late = omap3430_init_late,
394 .init_time = omap3_secure_sync32k_timer_init,
395 .restart = omap3xxx_restart,