4 * Copyright (C) 2010 Magnus Damm
5 * Copyright (C) 2008 Yoshihiro Shimoda
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 #include <linux/clk.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
24 #include <linux/irq.h>
25 #include <linux/platform_device.h>
26 #include <linux/delay.h>
27 #include <linux/mfd/sh_mobile_sdhi.h>
28 #include <linux/mfd/tmio.h>
29 #include <linux/mmc/host.h>
30 #include <linux/mtd/mtd.h>
31 #include <linux/mtd/partitions.h>
32 #include <linux/mtd/physmap.h>
33 #include <linux/mmc/sh_mmcif.h>
34 #include <linux/i2c.h>
35 #include <linux/i2c/tsc2007.h>
37 #include <linux/smsc911x.h>
38 #include <linux/sh_intc.h>
39 #include <linux/sh_clk.h>
40 #include <linux/gpio.h>
41 #include <linux/input.h>
42 #include <linux/leds.h>
43 #include <linux/input/sh_keysc.h>
44 #include <linux/usb/r8a66597.h>
46 #include <media/sh_mobile_ceu.h>
47 #include <media/sh_mobile_csi2.h>
48 #include <media/soc_camera.h>
50 #include <sound/sh_fsi.h>
52 #include <video/sh_mobile_hdmi.h>
53 #include <video/sh_mobile_lcdc.h>
54 #include <video/sh_mipi_dsi.h>
56 #include <mach/common.h>
57 #include <mach/irqs.h>
58 #include <mach/sh7372.h>
60 #include <asm/mach-types.h>
61 #include <asm/mach/arch.h>
62 #include <asm/mach/map.h>
63 #include <asm/mach/time.h>
66 * Address Interface BusWidth note
67 * ------------------------------------------------------------------
68 * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
69 * 0x0800_0000 user area -
70 * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
71 * 0x1400_0000 Ether (LAN9220) 16bit
72 * 0x1600_0000 user area - cannot use with NAND
73 * 0x1800_0000 user area -
75 * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
81 * SW1 | SW2 | SW7 | NOR Flash ROM
82 * bit1 | bit1 bit2 | bit1 | Memory allocation
83 * ------+------------+------+------------------
84 * OFF | ON OFF | ON | Area 0
85 * OFF | ON OFF | OFF | Area 4
91 * SW1 | SW2 | SW7 | NAND Flash ROM
92 * bit1 | bit1 bit2 | bit2 | Memory allocation
93 * ------+------------+------+------------------
94 * OFF | ON OFF | ON | FCE 0
95 * OFF | ON OFF | OFF | FCE 1
102 * -----------------------
108 * LCD / IRQ / KEYSC / IrDA
110 * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
111 * LCD = 2nd LCDC (WVGA)
115 * -------------+-----------------------+---------------+
116 * ON | KEY / IrDA | LCD |
117 * OFF | KEY / IrDA / IRQ | IRQ |
122 * You can choice display type on menuconfig.
123 * Then, check above dip-switch.
129 * J7 : 1-2 MAX3355E VBUS
138 * SW41 : ON : SH-Mobile AP4 Audio Mode
139 * : OFF : Bluetooth Audio Mode
145 * J22 : select card voltage
150 * | bit1 | bit2 | bit3 | bit4
151 * ------------+------+------+------+-------
152 * MMC0 OFF | OFF | ON | ON | X
153 * SDHI1 OFF | ON | X | OFF | ON
161 static struct mtd_partition nor_flash_partitions[] = {
164 .offset = 0x00000000,
169 .offset = MTDPART_OFS_APPEND,
174 .offset = MTDPART_OFS_APPEND,
175 .size = 8 * 1024 * 1024,
176 .mask_flags = MTD_WRITEABLE,
180 .offset = MTDPART_OFS_APPEND,
181 .size = 8 * 1024 * 1024,
185 .offset = MTDPART_OFS_APPEND,
186 .size = MTDPART_SIZ_FULL,
190 static struct physmap_flash_data nor_flash_data = {
192 .parts = nor_flash_partitions,
193 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
196 static struct resource nor_flash_resources[] = {
199 .end = 0x08000000 - 1,
200 .flags = IORESOURCE_MEM,
204 static struct platform_device nor_flash_device = {
205 .name = "physmap-flash",
207 .platform_data = &nor_flash_data,
209 .num_resources = ARRAY_SIZE(nor_flash_resources),
210 .resource = nor_flash_resources,
214 static struct resource smc911x_resources[] = {
217 .end = 0x16000000 - 1,
218 .flags = IORESOURCE_MEM,
220 .start = evt2irq(0x02c0) /* IRQ6A */,
221 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
225 static struct smsc911x_platform_config smsc911x_info = {
226 .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
227 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
228 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
231 static struct platform_device smc911x_device = {
234 .num_resources = ARRAY_SIZE(smc911x_resources),
235 .resource = smc911x_resources,
237 .platform_data = &smsc911x_info,
242 * The card detect pin of the top SD/MMC slot (CN7) is active low and is
243 * connected to GPIO A22 of SH7372 (GPIO_PORT41).
245 static int slot_cn7_get_cd(struct platform_device *pdev)
247 if (gpio_is_valid(GPIO_PORT41))
248 return !gpio_get_value(GPIO_PORT41);
254 static struct resource sh_mmcif_resources[] = {
259 .flags = IORESOURCE_MEM,
263 .start = evt2irq(0x1ac0),
264 .flags = IORESOURCE_IRQ,
268 .start = evt2irq(0x1ae0),
269 .flags = IORESOURCE_IRQ,
273 static struct sh_mmcif_plat_data sh_mmcif_plat = {
275 .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
276 .caps = MMC_CAP_4_BIT_DATA |
279 .get_cd = slot_cn7_get_cd,
282 static struct platform_device sh_mmcif_device = {
287 .coherent_dma_mask = 0xffffffff,
288 .platform_data = &sh_mmcif_plat,
290 .num_resources = ARRAY_SIZE(sh_mmcif_resources),
291 .resource = sh_mmcif_resources,
295 static struct sh_mobile_sdhi_info sdhi0_info = {
296 .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
297 .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
300 static struct resource sdhi0_resources[] = {
305 .flags = IORESOURCE_MEM,
308 .start = evt2irq(0x0e00) /* SDHI0 */,
309 .flags = IORESOURCE_IRQ,
313 static struct platform_device sdhi0_device = {
314 .name = "sh_mobile_sdhi",
315 .num_resources = ARRAY_SIZE(sdhi0_resources),
316 .resource = sdhi0_resources,
319 .platform_data = &sdhi0_info,
324 static struct sh_mobile_sdhi_info sdhi1_info = {
325 .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
326 .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
327 .tmio_ocr_mask = MMC_VDD_165_195,
328 .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
329 .tmio_caps = MMC_CAP_NEEDS_POLL,
330 .get_cd = slot_cn7_get_cd,
333 static struct resource sdhi1_resources[] = {
338 .flags = IORESOURCE_MEM,
341 .start = evt2irq(0x0e80),
342 .flags = IORESOURCE_IRQ,
346 static struct platform_device sdhi1_device = {
347 .name = "sh_mobile_sdhi",
348 .num_resources = ARRAY_SIZE(sdhi1_resources),
349 .resource = sdhi1_resources,
352 .platform_data = &sdhi1_info,
357 static void usb1_host_port_power(int port, int power)
359 if (!power) /* only power-on supported for now */
362 /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
363 __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
366 static struct r8a66597_platdata usb1_host_data = {
368 .port_power = usb1_host_port_power,
371 static struct resource usb1_host_resources[] = {
375 .end = 0xE68B00E6 - 1,
376 .flags = IORESOURCE_MEM,
379 .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
380 .flags = IORESOURCE_IRQ,
384 static struct platform_device usb1_host_device = {
385 .name = "r8a66597_hcd",
388 .dma_mask = NULL, /* not use dma */
389 .coherent_dma_mask = 0xffffffff,
390 .platform_data = &usb1_host_data,
392 .num_resources = ARRAY_SIZE(usb1_host_resources),
393 .resource = usb1_host_resources,
396 const static struct fb_videomode ap4evb_lcdc_modes[] = {
398 #ifdef CONFIG_AP4EVB_QHD
399 .name = "R63302(QHD)",
408 .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
410 .name = "WVGA Panel",
424 static struct sh_mobile_lcdc_info lcdc_info = {
426 .chan = LCDC_CHAN_MAINLCD,
428 .lcd_cfg = ap4evb_lcdc_modes,
429 .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
433 static struct resource lcdc_resources[] = {
436 .start = 0xfe940000, /* P4-only space */
438 .flags = IORESOURCE_MEM,
441 .start = intcs_evt2irq(0x580),
442 .flags = IORESOURCE_IRQ,
446 static struct platform_device lcdc_device = {
447 .name = "sh_mobile_lcdc_fb",
448 .num_resources = ARRAY_SIZE(lcdc_resources),
449 .resource = lcdc_resources,
451 .platform_data = &lcdc_info,
452 .coherent_dma_mask = ~0,
459 #ifdef CONFIG_AP4EVB_QHD
461 /* KEYSC (Needs SW43 set to ON) */
462 static struct sh_keysc_info keysc_info = {
463 .mode = SH_KEYSC_MODE_1,
467 KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
468 KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
469 KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
470 KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
471 KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
475 static struct resource keysc_resources[] = {
480 .flags = IORESOURCE_MEM,
483 .start = evt2irq(0x0be0), /* KEYSC_KEY */
484 .flags = IORESOURCE_IRQ,
488 static struct platform_device keysc_device = {
490 .id = 0, /* "keysc0" clock */
491 .num_resources = ARRAY_SIZE(keysc_resources),
492 .resource = keysc_resources,
494 .platform_data = &keysc_info,
499 static struct resource mipidsi0_resources[] = {
503 .flags = IORESOURCE_MEM,
507 static struct sh_mipi_dsi_info mipidsi0_info = {
508 .data_format = MIPI_RGB888,
509 .lcd_chan = &lcdc_info.ch[0],
512 static struct platform_device mipidsi0_device = {
513 .name = "sh-mipi-dsi",
514 .num_resources = ARRAY_SIZE(mipidsi0_resources),
515 .resource = mipidsi0_resources,
518 .platform_data = &mipidsi0_info,
522 /* This function will disappear when we switch to (runtime) PM */
523 static int __init ap4evb_init_display_clk(void)
525 struct clk *lcdc_clk;
526 struct clk *dsitx_clk;
529 lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0");
530 if (IS_ERR(lcdc_clk))
531 return PTR_ERR(lcdc_clk);
533 dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0");
534 if (IS_ERR(dsitx_clk)) {
535 ret = PTR_ERR(dsitx_clk);
539 ret = clk_enable(lcdc_clk);
543 ret = clk_enable(dsitx_clk);
550 clk_disable(lcdc_clk);
558 device_initcall(ap4evb_init_display_clk);
560 static struct platform_device *qhd_devices[] __initdata = {
564 #endif /* CONFIG_AP4EVB_QHD */
567 #define IRQ_FSI evt2irq(0x1840)
569 static int fsi_set_rate(int is_porta, int rate)
571 struct clk *fsib_clk;
572 struct clk *fdiv_clk = &sh7372_fsidivb_clk;
575 /* set_rate is not needed if port A */
579 fsib_clk = clk_get(NULL, "fsib_clk");
580 if (IS_ERR(fsib_clk))
585 clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
586 clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
587 ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
590 pr_err("unsupported rate in FSI2 port B\n");
600 static struct sh_fsi_platform_info fsi_info = {
601 .porta_flags = SH_FSI_BRS_INV |
602 SH_FSI_OUT_SLAVE_MODE |
603 SH_FSI_IN_SLAVE_MODE |
607 .portb_flags = SH_FSI_BRS_INV |
611 .set_rate = fsi_set_rate,
614 static struct resource fsi_resources[] = {
618 .end = 0xFE3C0400 - 1,
619 .flags = IORESOURCE_MEM,
623 .flags = IORESOURCE_IRQ,
627 static struct platform_device fsi_device = {
630 .num_resources = ARRAY_SIZE(fsi_resources),
631 .resource = fsi_resources,
633 .platform_data = &fsi_info,
637 static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
638 .clock_source = LCDC_CLK_EXTERNAL,
640 .chan = LCDC_CHAN_MAINLCD,
642 .interface_type = RGB24,
644 .flags = LCDC_FLAGS_DWPOL,
648 static struct resource lcdc1_resources[] = {
653 .flags = IORESOURCE_MEM,
656 .start = intcs_evt2irq(0x1780),
657 .flags = IORESOURCE_IRQ,
661 static struct platform_device lcdc1_device = {
662 .name = "sh_mobile_lcdc_fb",
663 .num_resources = ARRAY_SIZE(lcdc1_resources),
664 .resource = lcdc1_resources,
667 .platform_data = &sh_mobile_lcdc1_info,
668 .coherent_dma_mask = ~0,
672 static struct sh_mobile_hdmi_info hdmi_info = {
673 .lcd_chan = &sh_mobile_lcdc1_info.ch[0],
674 .lcd_dev = &lcdc1_device.dev,
675 .flags = HDMI_SND_SRC_SPDIF,
678 static struct resource hdmi_resources[] = {
683 .flags = IORESOURCE_MEM,
686 /* There's also an HDMI interrupt on INTCS @ 0x18e0 */
687 .start = evt2irq(0x17e0),
688 .flags = IORESOURCE_IRQ,
692 static struct platform_device hdmi_device = {
693 .name = "sh-mobile-hdmi",
694 .num_resources = ARRAY_SIZE(hdmi_resources),
695 .resource = hdmi_resources,
698 .platform_data = &hdmi_info,
702 static struct gpio_led ap4evb_leds[] = {
705 .gpio = GPIO_PORT185,
706 .default_state = LEDS_GPIO_DEFSTATE_ON,
710 .gpio = GPIO_PORT186,
711 .default_state = LEDS_GPIO_DEFSTATE_ON,
715 .gpio = GPIO_PORT187,
716 .default_state = LEDS_GPIO_DEFSTATE_ON,
720 .gpio = GPIO_PORT188,
721 .default_state = LEDS_GPIO_DEFSTATE_ON,
725 static struct gpio_led_platform_data ap4evb_leds_pdata = {
726 .num_leds = ARRAY_SIZE(ap4evb_leds),
730 static struct platform_device leds_device = {
734 .platform_data = &ap4evb_leds_pdata,
738 static struct i2c_board_info imx074_info = {
739 I2C_BOARD_INFO("imx074", 0x1a),
742 struct soc_camera_link imx074_link = {
744 .board_info = &imx074_info,
746 .module_name = "imx074",
749 static struct platform_device ap4evb_camera = {
750 .name = "soc-camera-pdrv",
753 .platform_data = &imx074_link,
757 static struct sh_csi2_client_config csi2_clients[] = {
759 .phy = SH_CSI2_PHY_MAIN,
762 .pdev = &ap4evb_camera,
766 static struct sh_csi2_pdata csi2_info = {
768 .clients = csi2_clients,
769 .num_clients = ARRAY_SIZE(csi2_clients),
770 .flags = SH_CSI2_ECC | SH_CSI2_CRC,
773 static struct resource csi2_resources[] = {
778 .flags = IORESOURCE_MEM,
781 .start = intcs_evt2irq(0x17a0),
782 .flags = IORESOURCE_IRQ,
786 static struct platform_device csi2_device = {
787 .name = "sh-mobile-csi2",
789 .num_resources = ARRAY_SIZE(csi2_resources),
790 .resource = csi2_resources,
792 .platform_data = &csi2_info,
796 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
797 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
798 .csi2_dev = &csi2_device.dev,
801 static struct resource ceu_resources[] = {
806 .flags = IORESOURCE_MEM,
809 .start = intcs_evt2irq(0x880),
810 .flags = IORESOURCE_IRQ,
813 /* place holder for contiguous memory */
817 static struct platform_device ceu_device = {
818 .name = "sh_mobile_ceu",
819 .id = 0, /* "ceu0" clock */
820 .num_resources = ARRAY_SIZE(ceu_resources),
821 .resource = ceu_resources,
823 .platform_data = &sh_mobile_ceu_info,
827 static struct platform_device *ap4evb_devices[] __initdata = {
844 static int __init hdmi_init_pm_clock(void)
846 struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
850 if (IS_ERR(hdmi_ick)) {
851 ret = PTR_ERR(hdmi_ick);
852 pr_err("Cannot get HDMI ICK: %d\n", ret);
856 ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
858 pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
862 pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
864 rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
866 pr_err("Cannot get suitable rate: %ld\n", rate);
871 ret = clk_set_rate(&sh7372_pllc2_clk, rate);
873 pr_err("Cannot set rate %ld: %d\n", rate, ret);
877 pr_debug("PLLC2 set frequency %lu\n", rate);
879 ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
881 pr_err("Cannot set HDMI parent: %d\n", ret);
886 if (!IS_ERR(hdmi_ick))
891 device_initcall(hdmi_init_pm_clock);
893 #define FSIACK_DUMMY_RATE 48000
894 static int __init fsi_init_pm_clock(void)
896 struct clk *fsia_ick;
900 * FSIACK is connected to AK4642,
901 * and the rate is depend on playing sound rate.
902 * So, set dummy rate (= 48k) here
904 ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
906 pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
910 fsia_ick = clk_get(&fsi_device.dev, "icka");
911 if (IS_ERR(fsia_ick)) {
912 ret = PTR_ERR(fsia_ick);
913 pr_err("Cannot get FSI ICK: %d\n", ret);
917 ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
919 pr_err("Cannot set FSI-A parent: %d\n", ret);
923 ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
925 pr_err("Cannot set FSI-A rate: %d\n", ret);
932 device_initcall(fsi_init_pm_clock);
940 * current gpio frame work doesn't have
941 * the method to control only pull up/down/free.
942 * this function should be replaced by correct gpio function
944 static void __init gpio_no_direction(u32 addr)
946 __raw_writeb(0x00, addr);
950 #ifdef CONFIG_AP4EVB_QHD
951 # define GPIO_TSC_IRQ GPIO_FN_IRQ28_123
952 # define GPIO_TSC_PORT GPIO_PORT123
954 # define GPIO_TSC_IRQ GPIO_FN_IRQ7_40
955 # define GPIO_TSC_PORT GPIO_PORT40
958 #define IRQ28 evt2irq(0x3380) /* IRQ28A */
959 #define IRQ7 evt2irq(0x02e0) /* IRQ7A */
960 static int ts_get_pendown_state(void)
964 gpio_free(GPIO_TSC_IRQ);
966 gpio_request(GPIO_TSC_PORT, NULL);
968 gpio_direction_input(GPIO_TSC_PORT);
970 val = gpio_get_value(GPIO_TSC_PORT);
972 gpio_request(GPIO_TSC_IRQ, NULL);
977 static int ts_init(void)
979 gpio_request(GPIO_TSC_IRQ, NULL);
984 static struct tsc2007_platform_data tsc2007_info = {
987 .get_pendown_state = ts_get_pendown_state,
988 .init_platform_hw = ts_init,
991 static struct i2c_board_info tsc_device = {
992 I2C_BOARD_INFO("tsc2007", 0x48),
994 .platform_data = &tsc2007_info,
995 /*.irq is selected on ap4evb_init */
999 static struct i2c_board_info i2c0_devices[] = {
1001 I2C_BOARD_INFO("ak4643", 0x13),
1005 static struct i2c_board_info i2c1_devices[] = {
1007 I2C_BOARD_INFO("r2025sd", 0x32),
1011 static struct map_desc ap4evb_io_desc[] __initdata = {
1012 /* create a 1:1 entity map for 0xe6xxxxxx
1013 * used by CPGA, INTC and PFC.
1016 .virtual = 0xe6000000,
1017 .pfn = __phys_to_pfn(0xe6000000),
1018 .length = 256 << 20,
1019 .type = MT_DEVICE_NONSHARED
1023 static void __init ap4evb_map_io(void)
1025 iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
1027 /* setup early devices and console here as well */
1028 sh7372_add_early_devices();
1029 shmobile_setup_console();
1032 #define GPIO_PORT9CR 0xE6051009
1033 #define GPIO_PORT10CR 0xE605100A
1034 #define USCCR1 0xE6058144
1035 static void __init ap4evb_init(void)
1040 sh7372_pinmux_init();
1043 gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
1044 gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
1046 /* enable SMSC911X */
1047 gpio_request(GPIO_FN_CS5A, NULL);
1048 gpio_request(GPIO_FN_IRQ6_39, NULL);
1050 /* enable Debug switch (S6) */
1051 gpio_request(GPIO_PORT32, NULL);
1052 gpio_request(GPIO_PORT33, NULL);
1053 gpio_request(GPIO_PORT34, NULL);
1054 gpio_request(GPIO_PORT35, NULL);
1055 gpio_direction_input(GPIO_PORT32);
1056 gpio_direction_input(GPIO_PORT33);
1057 gpio_direction_input(GPIO_PORT34);
1058 gpio_direction_input(GPIO_PORT35);
1059 gpio_export(GPIO_PORT32, 0);
1060 gpio_export(GPIO_PORT33, 0);
1061 gpio_export(GPIO_PORT34, 0);
1062 gpio_export(GPIO_PORT35, 0);
1065 gpio_request(GPIO_FN_SDHICD0, NULL);
1066 gpio_request(GPIO_FN_SDHIWP0, NULL);
1067 gpio_request(GPIO_FN_SDHICMD0, NULL);
1068 gpio_request(GPIO_FN_SDHICLK0, NULL);
1069 gpio_request(GPIO_FN_SDHID0_3, NULL);
1070 gpio_request(GPIO_FN_SDHID0_2, NULL);
1071 gpio_request(GPIO_FN_SDHID0_1, NULL);
1072 gpio_request(GPIO_FN_SDHID0_0, NULL);
1075 gpio_request(GPIO_FN_SDHICMD1, NULL);
1076 gpio_request(GPIO_FN_SDHICLK1, NULL);
1077 gpio_request(GPIO_FN_SDHID1_3, NULL);
1078 gpio_request(GPIO_FN_SDHID1_2, NULL);
1079 gpio_request(GPIO_FN_SDHID1_1, NULL);
1080 gpio_request(GPIO_FN_SDHID1_0, NULL);
1083 gpio_request(GPIO_FN_MMCD0_0, NULL);
1084 gpio_request(GPIO_FN_MMCD0_1, NULL);
1085 gpio_request(GPIO_FN_MMCD0_2, NULL);
1086 gpio_request(GPIO_FN_MMCD0_3, NULL);
1087 gpio_request(GPIO_FN_MMCD0_4, NULL);
1088 gpio_request(GPIO_FN_MMCD0_5, NULL);
1089 gpio_request(GPIO_FN_MMCD0_6, NULL);
1090 gpio_request(GPIO_FN_MMCD0_7, NULL);
1091 gpio_request(GPIO_FN_MMCCMD0, NULL);
1092 gpio_request(GPIO_FN_MMCCLK0, NULL);
1095 gpio_request(GPIO_FN_VBUS0_1, NULL);
1096 gpio_request(GPIO_FN_IDIN_1_18, NULL);
1097 gpio_request(GPIO_FN_PWEN_1_115, NULL);
1098 gpio_request(GPIO_FN_OVCN_1_114, NULL);
1099 gpio_request(GPIO_FN_EXTLP_1, NULL);
1100 gpio_request(GPIO_FN_OVCN2_1, NULL);
1103 __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */
1105 /* enable FSI2 port A (ak4643) */
1106 gpio_request(GPIO_FN_FSIAIBT, NULL);
1107 gpio_request(GPIO_FN_FSIAILR, NULL);
1108 gpio_request(GPIO_FN_FSIAISLD, NULL);
1109 gpio_request(GPIO_FN_FSIAOSLD, NULL);
1110 gpio_request(GPIO_PORT161, NULL);
1111 gpio_direction_output(GPIO_PORT161, 0); /* slave */
1113 gpio_request(GPIO_PORT9, NULL);
1114 gpio_request(GPIO_PORT10, NULL);
1115 gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
1116 gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
1118 /* card detect pin for MMC slot (CN7) */
1119 gpio_request(GPIO_PORT41, NULL);
1120 gpio_direction_input(GPIO_PORT41);
1122 /* setup FSI2 port B (HDMI) */
1123 gpio_request(GPIO_FN_FSIBCK, NULL);
1124 __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
1126 /* set SPU2 clock to 119.6 MHz */
1127 clk = clk_get(NULL, "spu_clk");
1129 clk_set_rate(clk, clk_round_rate(clk, 119600000));
1134 * set irq priority, to avoid sound chopping
1135 * when NFS rootfs is used
1136 * FSI(3) > SMSC911X(2)
1138 intc_set_priority(IRQ_FSI, 3);
1140 i2c_register_board_info(0, i2c0_devices,
1141 ARRAY_SIZE(i2c0_devices));
1143 i2c_register_board_info(1, i2c1_devices,
1144 ARRAY_SIZE(i2c1_devices));
1146 #ifdef CONFIG_AP4EVB_QHD
1149 * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
1150 * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
1154 gpio_request(GPIO_FN_KEYOUT0, NULL);
1155 gpio_request(GPIO_FN_KEYOUT1, NULL);
1156 gpio_request(GPIO_FN_KEYOUT2, NULL);
1157 gpio_request(GPIO_FN_KEYOUT3, NULL);
1158 gpio_request(GPIO_FN_KEYOUT4, NULL);
1159 gpio_request(GPIO_FN_KEYIN0_136, NULL);
1160 gpio_request(GPIO_FN_KEYIN1_135, NULL);
1161 gpio_request(GPIO_FN_KEYIN2_134, NULL);
1162 gpio_request(GPIO_FN_KEYIN3_133, NULL);
1163 gpio_request(GPIO_FN_KEYIN4, NULL);
1165 /* enable TouchScreen */
1166 set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
1168 tsc_device.irq = IRQ28;
1169 i2c_register_board_info(1, &tsc_device, 1);
1172 lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
1173 lcdc_info.ch[0].interface_type = RGB24;
1174 lcdc_info.ch[0].clock_divider = 1;
1175 lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
1176 lcdc_info.ch[0].lcd_size_cfg.width = 44;
1177 lcdc_info.ch[0].lcd_size_cfg.height = 79;
1179 platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
1183 * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
1184 * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
1187 gpio_request(GPIO_FN_LCDD17, NULL);
1188 gpio_request(GPIO_FN_LCDD16, NULL);
1189 gpio_request(GPIO_FN_LCDD15, NULL);
1190 gpio_request(GPIO_FN_LCDD14, NULL);
1191 gpio_request(GPIO_FN_LCDD13, NULL);
1192 gpio_request(GPIO_FN_LCDD12, NULL);
1193 gpio_request(GPIO_FN_LCDD11, NULL);
1194 gpio_request(GPIO_FN_LCDD10, NULL);
1195 gpio_request(GPIO_FN_LCDD9, NULL);
1196 gpio_request(GPIO_FN_LCDD8, NULL);
1197 gpio_request(GPIO_FN_LCDD7, NULL);
1198 gpio_request(GPIO_FN_LCDD6, NULL);
1199 gpio_request(GPIO_FN_LCDD5, NULL);
1200 gpio_request(GPIO_FN_LCDD4, NULL);
1201 gpio_request(GPIO_FN_LCDD3, NULL);
1202 gpio_request(GPIO_FN_LCDD2, NULL);
1203 gpio_request(GPIO_FN_LCDD1, NULL);
1204 gpio_request(GPIO_FN_LCDD0, NULL);
1205 gpio_request(GPIO_FN_LCDDISP, NULL);
1206 gpio_request(GPIO_FN_LCDDCK, NULL);
1208 gpio_request(GPIO_PORT189, NULL); /* backlight */
1209 gpio_direction_output(GPIO_PORT189, 1);
1211 gpio_request(GPIO_PORT151, NULL); /* LCDDON */
1212 gpio_direction_output(GPIO_PORT151, 1);
1214 lcdc_info.clock_source = LCDC_CLK_BUS;
1215 lcdc_info.ch[0].interface_type = RGB18;
1216 lcdc_info.ch[0].clock_divider = 2;
1217 lcdc_info.ch[0].flags = 0;
1218 lcdc_info.ch[0].lcd_size_cfg.width = 152;
1219 lcdc_info.ch[0].lcd_size_cfg.height = 91;
1221 /* enable TouchScreen */
1222 set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
1224 tsc_device.irq = IRQ7;
1225 i2c_register_board_info(0, &tsc_device, 1);
1226 #endif /* CONFIG_AP4EVB_QHD */
1231 * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
1235 /* MIPI-CSI stuff */
1236 gpio_request(GPIO_FN_VIO_CKO, NULL);
1238 clk = clk_get(NULL, "vck1_clk");
1240 clk_set_rate(clk, clk_round_rate(clk, 13000000));
1245 sh7372_add_standard_devices();
1248 gpio_request(GPIO_FN_HDMI_HPD, NULL);
1249 gpio_request(GPIO_FN_HDMI_CEC, NULL);
1251 /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
1252 #define SRCR4 0xe61580bc
1253 srcr4 = __raw_readl(SRCR4);
1254 __raw_writel(srcr4 | (1 << 13), SRCR4);
1256 __raw_writel(srcr4 & ~(1 << 13), SRCR4);
1258 platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
1261 static void __init ap4evb_timer_init(void)
1263 sh7372_clock_init();
1264 shmobile_timer.init();
1266 /* External clock source */
1267 clk_set_rate(&sh7372_dv_clki_clk, 27000000);
1270 static struct sys_timer ap4evb_timer = {
1271 .init = ap4evb_timer_init,
1274 MACHINE_START(AP4EVB, "ap4evb")
1275 .map_io = ap4evb_map_io,
1276 .init_irq = sh7372_init_irq,
1277 .init_machine = ap4evb_init,
1278 .timer = &ap4evb_timer,