2 * KZM-A9-GT board support
4 * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 #include <linux/delay.h>
21 #include <linux/gpio.h>
22 #include <linux/gpio_keys.h>
24 #include <linux/irq.h>
25 #include <linux/i2c.h>
26 #include <linux/i2c/pcf857x.h>
27 #include <linux/input.h>
28 #include <linux/mmc/host.h>
29 #include <linux/mmc/sh_mmcif.h>
30 #include <linux/mmc/sh_mobile_sdhi.h>
31 #include <linux/mfd/tmio.h>
32 #include <linux/platform_device.h>
33 #include <linux/regulator/fixed.h>
34 #include <linux/regulator/machine.h>
35 #include <linux/smsc911x.h>
36 #include <linux/usb/r8a66597.h>
37 #include <linux/usb/renesas_usbhs.h>
38 #include <linux/videodev2.h>
39 #include <sound/sh_fsi.h>
40 #include <sound/simple_card.h>
41 #include <mach/irqs.h>
42 #include <mach/sh73a0.h>
43 #include <mach/common.h>
44 #include <asm/hardware/cache-l2x0.h>
45 #include <asm/hardware/gic.h>
46 #include <asm/mach-types.h>
47 #include <asm/mach/arch.h>
48 #include <video/sh_mobile_lcdc.h>
53 #define GPIO_PCF8575_BASE (GPIO_NR)
54 #define GPIO_PCF8575_PORT10 (GPIO_NR + 8)
55 #define GPIO_PCF8575_PORT11 (GPIO_NR + 9)
56 #define GPIO_PCF8575_PORT12 (GPIO_NR + 10)
57 #define GPIO_PCF8575_PORT13 (GPIO_NR + 11)
58 #define GPIO_PCF8575_PORT14 (GPIO_NR + 12)
59 #define GPIO_PCF8575_PORT15 (GPIO_NR + 13)
60 #define GPIO_PCF8575_PORT16 (GPIO_NR + 14)
62 /* Dummy supplies, where voltage doesn't matter */
63 static struct regulator_consumer_supply dummy_supplies[] = {
64 REGULATOR_SUPPLY("vddvario", "smsc911x"),
65 REGULATOR_SUPPLY("vdd33a", "smsc911x"),
71 * this command is required when playback.
73 * # amixer set "LINEOUT Mixer DACL" on
77 static struct resource smsc9221_resources[] = {
79 .start = 0x10000000, /* CS4 */
81 .flags = IORESOURCE_MEM,
84 .start = intcs_evt2irq(0x260), /* IRQ3 */
85 .flags = IORESOURCE_IRQ,
89 static struct smsc911x_platform_config smsc9221_platdata = {
90 .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
91 .phy_interface = PHY_INTERFACE_MODE_MII,
92 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
93 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
96 static struct platform_device smsc_device = {
99 .platform_data = &smsc9221_platdata,
101 .resource = smsc9221_resources,
102 .num_resources = ARRAY_SIZE(smsc9221_resources),
105 /* USB external chip */
106 static struct r8a66597_platdata usb_host_data = {
108 .xtal = R8A66597_PLATDATA_XTAL_48MHZ,
111 static struct resource usb_resources[] = {
114 .end = 0x1001ffff - 1,
115 .flags = IORESOURCE_MEM,
118 .start = intcs_evt2irq(0x220), /* IRQ1 */
119 .flags = IORESOURCE_IRQ,
123 static struct platform_device usb_host_device = {
124 .name = "r8a66597_hcd",
126 .platform_data = &usb_host_data,
128 .coherent_dma_mask = 0xffffffff,
130 .num_resources = ARRAY_SIZE(usb_resources),
131 .resource = usb_resources,
135 struct usbhs_private {
138 struct renesas_usbhs_platform_info info;
141 #define IRQ15 intcs_evt2irq(0x03e0)
142 #define USB_PHY_MODE (1 << 4)
143 #define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
144 #define USB_PHY_ON (1 << 1)
145 #define USB_PHY_OFF (1 << 0)
146 #define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
148 #define usbhs_get_priv(pdev) \
149 container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
151 static int usbhs_get_vbus(struct platform_device *pdev)
153 struct usbhs_private *priv = usbhs_get_priv(pdev);
155 return !((1 << 7) & __raw_readw(priv->cr2));
158 static void usbhs_phy_reset(struct platform_device *pdev)
160 struct usbhs_private *priv = usbhs_get_priv(pdev);
163 __raw_writew(0x8a0a, priv->cr2);
166 static int usbhs_get_id(struct platform_device *pdev)
171 static irqreturn_t usbhs_interrupt(int irq, void *data)
173 struct platform_device *pdev = data;
174 struct usbhs_private *priv = usbhs_get_priv(pdev);
176 renesas_usbhs_call_notify_hotplug(pdev);
179 __raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
184 static int usbhs_hardware_init(struct platform_device *pdev)
186 struct usbhs_private *priv = usbhs_get_priv(pdev);
189 /* clear interrupt status */
190 __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
192 ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
193 dev_name(&pdev->dev), pdev);
195 dev_err(&pdev->dev, "request_irq err\n");
199 /* enable USB phy interrupt */
200 __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
205 static void usbhs_hardware_exit(struct platform_device *pdev)
207 struct usbhs_private *priv = usbhs_get_priv(pdev);
209 /* clear interrupt status */
210 __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
212 free_irq(IRQ15, pdev);
215 static u32 usbhs_pipe_cfg[] = {
216 USB_ENDPOINT_XFER_CONTROL,
217 USB_ENDPOINT_XFER_ISOC,
218 USB_ENDPOINT_XFER_ISOC,
219 USB_ENDPOINT_XFER_BULK,
220 USB_ENDPOINT_XFER_BULK,
221 USB_ENDPOINT_XFER_BULK,
222 USB_ENDPOINT_XFER_INT,
223 USB_ENDPOINT_XFER_INT,
224 USB_ENDPOINT_XFER_INT,
225 USB_ENDPOINT_XFER_BULK,
226 USB_ENDPOINT_XFER_BULK,
227 USB_ENDPOINT_XFER_BULK,
228 USB_ENDPOINT_XFER_BULK,
229 USB_ENDPOINT_XFER_BULK,
230 USB_ENDPOINT_XFER_BULK,
231 USB_ENDPOINT_XFER_BULK,
234 static struct usbhs_private usbhs_private = {
235 .phy = IOMEM(0xe60781e0), /* USBPHYINT */
236 .cr2 = IOMEM(0xe605810c), /* USBCR2 */
238 .platform_callback = {
239 .hardware_init = usbhs_hardware_init,
240 .hardware_exit = usbhs_hardware_exit,
241 .get_id = usbhs_get_id,
242 .phy_reset = usbhs_phy_reset,
243 .get_vbus = usbhs_get_vbus,
248 .pipe_type = usbhs_pipe_cfg,
249 .pipe_size = ARRAY_SIZE(usbhs_pipe_cfg),
254 static struct resource usbhs_resources[] = {
257 .end = 0xE68900e6 - 1,
258 .flags = IORESOURCE_MEM,
261 .start = gic_spi(62),
263 .flags = IORESOURCE_IRQ,
267 static struct platform_device usbhs_device = {
268 .name = "renesas_usbhs",
272 .coherent_dma_mask = 0xffffffff,
273 .platform_data = &usbhs_private.info,
275 .num_resources = ARRAY_SIZE(usbhs_resources),
276 .resource = usbhs_resources,
280 static struct fb_videomode kzm_lcdc_mode = {
281 .name = "WVGA Panel",
293 static struct sh_mobile_lcdc_info lcdc_info = {
294 .clock_source = LCDC_CLK_BUS,
296 .chan = LCDC_CHAN_MAINLCD,
297 .fourcc = V4L2_PIX_FMT_RGB565,
298 .interface_type = RGB24,
299 .lcd_modes = &kzm_lcdc_mode,
310 static struct resource lcdc_resources[] = {
315 .flags = IORESOURCE_MEM,
318 .start = intcs_evt2irq(0x580),
319 .flags = IORESOURCE_IRQ,
323 static struct platform_device lcdc_device = {
324 .name = "sh_mobile_lcdc_fb",
325 .num_resources = ARRAY_SIZE(lcdc_resources),
326 .resource = lcdc_resources,
328 .platform_data = &lcdc_info,
329 .coherent_dma_mask = ~0,
333 /* Fixed 1.8V regulator to be used by MMCIF */
334 static struct regulator_consumer_supply fixed1v8_power_consumers[] =
336 REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
337 REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
341 static struct resource sh_mmcif_resources[] = {
346 .flags = IORESOURCE_MEM,
349 .start = gic_spi(141),
350 .flags = IORESOURCE_IRQ,
353 .start = gic_spi(140),
354 .flags = IORESOURCE_IRQ,
358 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
359 .ocr = MMC_VDD_165_195,
360 .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
361 .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
362 .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
365 static struct platform_device mmc_device = {
369 .coherent_dma_mask = 0xffffffff,
370 .platform_data = &sh_mmcif_platdata,
372 .num_resources = ARRAY_SIZE(sh_mmcif_resources),
373 .resource = sh_mmcif_resources,
376 /* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */
377 static struct regulator_consumer_supply fixed2v8_power_consumers[] =
379 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
380 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
381 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
382 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
386 static struct sh_mobile_sdhi_info sdhi0_info = {
387 .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
388 .tmio_caps = MMC_CAP_SD_HIGHSPEED,
389 .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
392 static struct resource sdhi0_resources[] = {
397 .flags = IORESOURCE_MEM,
400 .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
401 .start = gic_spi(83),
402 .flags = IORESOURCE_IRQ,
405 .name = SH_MOBILE_SDHI_IRQ_SDCARD,
406 .start = gic_spi(84),
407 .flags = IORESOURCE_IRQ,
410 .name = SH_MOBILE_SDHI_IRQ_SDIO,
411 .start = gic_spi(85),
412 .flags = IORESOURCE_IRQ,
416 static struct platform_device sdhi0_device = {
417 .name = "sh_mobile_sdhi",
418 .num_resources = ARRAY_SIZE(sdhi0_resources),
419 .resource = sdhi0_resources,
421 .platform_data = &sdhi0_info,
426 static struct sh_mobile_sdhi_info sdhi2_info = {
427 .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
428 TMIO_MMC_USE_GPIO_CD |
429 TMIO_MMC_WRPROTECT_DISABLE,
430 .tmio_caps = MMC_CAP_SD_HIGHSPEED,
431 .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
432 .cd_gpio = GPIO_PORT13,
435 static struct resource sdhi2_resources[] = {
440 .flags = IORESOURCE_MEM,
443 .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
444 .start = gic_spi(103),
445 .flags = IORESOURCE_IRQ,
448 .name = SH_MOBILE_SDHI_IRQ_SDCARD,
449 .start = gic_spi(104),
450 .flags = IORESOURCE_IRQ,
453 .name = SH_MOBILE_SDHI_IRQ_SDIO,
454 .start = gic_spi(105),
455 .flags = IORESOURCE_IRQ,
459 static struct platform_device sdhi2_device = {
460 .name = "sh_mobile_sdhi",
462 .num_resources = ARRAY_SIZE(sdhi2_resources),
463 .resource = sdhi2_resources,
465 .platform_data = &sdhi2_info,
470 #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
472 static struct gpio_keys_button gpio_buttons[] = {
473 GPIO_KEY(KEY_BACK, GPIO_PCF8575_PORT10, "SW3"),
474 GPIO_KEY(KEY_RIGHT, GPIO_PCF8575_PORT11, "SW2-R"),
475 GPIO_KEY(KEY_LEFT, GPIO_PCF8575_PORT12, "SW2-L"),
476 GPIO_KEY(KEY_ENTER, GPIO_PCF8575_PORT13, "SW2-P"),
477 GPIO_KEY(KEY_UP, GPIO_PCF8575_PORT14, "SW2-U"),
478 GPIO_KEY(KEY_DOWN, GPIO_PCF8575_PORT15, "SW2-D"),
479 GPIO_KEY(KEY_HOME, GPIO_PCF8575_PORT16, "SW1"),
482 static struct gpio_keys_platform_data gpio_key_info = {
483 .buttons = gpio_buttons,
484 .nbuttons = ARRAY_SIZE(gpio_buttons),
485 .poll_interval = 250, /* poling at this point */
488 static struct platform_device gpio_keys_device = {
489 /* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
490 .name = "gpio-keys-polled",
492 .platform_data = &gpio_key_info,
497 static struct sh_fsi_platform_info fsi_info = {
499 .tx_id = SHDMA_SLAVE_FSI2A_TX,
503 static struct resource fsi_resources[] = {
507 .end = 0xEC230400 - 1,
508 .flags = IORESOURCE_MEM,
511 .start = gic_spi(146),
512 .flags = IORESOURCE_IRQ,
516 static struct platform_device fsi_device = {
519 .num_resources = ARRAY_SIZE(fsi_resources),
520 .resource = fsi_resources,
522 .platform_data = &fsi_info,
526 static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = {
527 .fmt = SND_SOC_DAIFMT_LEFT_J,
528 .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM,
529 .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS,
533 static struct asoc_simple_card_info fsi2_ak4648_info = {
535 .card = "FSI2A-AK4648",
536 .cpu_dai = "fsia-dai",
537 .codec = "ak4642-codec.0-0012",
538 .platform = "sh_fsi2",
539 .codec_dai = "ak4642-hifi",
540 .init = &fsi2_ak4648_init_info,
543 static struct platform_device fsi_ak4648_device = {
544 .name = "asoc-simple-card",
546 .platform_data = &fsi2_ak4648_info,
551 static struct pcf857x_platform_data pcf8575_pdata = {
552 .gpio_base = GPIO_PCF8575_BASE,
555 static struct i2c_board_info i2c0_devices[] = {
557 I2C_BOARD_INFO("ak4648", 0x12),
560 I2C_BOARD_INFO("r2025sd", 0x32),
564 static struct i2c_board_info i2c1_devices[] = {
566 I2C_BOARD_INFO("st1232-ts", 0x55),
567 .irq = intcs_evt2irq(0x300), /* IRQ8 */
571 static struct i2c_board_info i2c3_devices[] = {
573 I2C_BOARD_INFO("pcf8575", 0x20),
574 .platform_data = &pcf8575_pdata,
578 static struct platform_device *kzm_devices[] __initdata = {
594 * This is quick hack for enabling LCDC backlight
596 static int __init as3711_enable_lcdc_backlight(void)
598 struct i2c_adapter *a = i2c_get_adapter(0);
609 0xff, 0x00, /* wait */
615 if (!machine_is_kzm9g())
625 for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
628 if (0xff == msg.buf[0]) {
633 ret = i2c_transfer(a, &msg, 1);
635 pr_err("i2c transfer fail\n");
642 device_initcall(as3711_enable_lcdc_backlight);
644 static void __init kzm_init(void)
646 regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
647 ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
648 regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
649 ARRAY_SIZE(fixed2v8_power_consumers), 2800000);
650 regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
652 sh73a0_pinmux_init();
655 gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
656 gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
657 gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
658 gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
660 /* CS4 for SMSC/USB */
661 gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
664 gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
665 gpio_direction_input(GPIO_PORT224);
668 gpio_request(GPIO_FN_LCDD23, NULL);
669 gpio_request(GPIO_FN_LCDD22, NULL);
670 gpio_request(GPIO_FN_LCDD21, NULL);
671 gpio_request(GPIO_FN_LCDD20, NULL);
672 gpio_request(GPIO_FN_LCDD19, NULL);
673 gpio_request(GPIO_FN_LCDD18, NULL);
674 gpio_request(GPIO_FN_LCDD17, NULL);
675 gpio_request(GPIO_FN_LCDD16, NULL);
676 gpio_request(GPIO_FN_LCDD15, NULL);
677 gpio_request(GPIO_FN_LCDD14, NULL);
678 gpio_request(GPIO_FN_LCDD13, NULL);
679 gpio_request(GPIO_FN_LCDD12, NULL);
680 gpio_request(GPIO_FN_LCDD11, NULL);
681 gpio_request(GPIO_FN_LCDD10, NULL);
682 gpio_request(GPIO_FN_LCDD9, NULL);
683 gpio_request(GPIO_FN_LCDD8, NULL);
684 gpio_request(GPIO_FN_LCDD7, NULL);
685 gpio_request(GPIO_FN_LCDD6, NULL);
686 gpio_request(GPIO_FN_LCDD5, NULL);
687 gpio_request(GPIO_FN_LCDD4, NULL);
688 gpio_request(GPIO_FN_LCDD3, NULL);
689 gpio_request(GPIO_FN_LCDD2, NULL);
690 gpio_request(GPIO_FN_LCDD1, NULL);
691 gpio_request(GPIO_FN_LCDD0, NULL);
692 gpio_request(GPIO_FN_LCDDISP, NULL);
693 gpio_request(GPIO_FN_LCDDCK, NULL);
695 gpio_request(GPIO_PORT222, NULL); /* LCDCDON */
696 gpio_request(GPIO_PORT226, NULL); /* SC */
697 gpio_direction_output(GPIO_PORT222, 1);
698 gpio_direction_output(GPIO_PORT226, 1);
701 gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
702 gpio_direction_input(GPIO_PORT223);
705 gpio_request(GPIO_FN_MMCCLK0, NULL);
706 gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
707 gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
708 gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
709 gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
710 gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
711 gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
712 gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
713 gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
714 gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
717 gpio_request(GPIO_FN_SDHIWP0, NULL);
718 gpio_request(GPIO_FN_SDHICD0, NULL);
719 gpio_request(GPIO_FN_SDHICMD0, NULL);
720 gpio_request(GPIO_FN_SDHICLK0, NULL);
721 gpio_request(GPIO_FN_SDHID0_3, NULL);
722 gpio_request(GPIO_FN_SDHID0_2, NULL);
723 gpio_request(GPIO_FN_SDHID0_1, NULL);
724 gpio_request(GPIO_FN_SDHID0_0, NULL);
725 gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
726 gpio_request(GPIO_PORT15, NULL);
727 gpio_direction_output(GPIO_PORT15, 1); /* power */
729 /* enable Micro SD */
730 gpio_request(GPIO_FN_SDHID2_0, NULL);
731 gpio_request(GPIO_FN_SDHID2_1, NULL);
732 gpio_request(GPIO_FN_SDHID2_2, NULL);
733 gpio_request(GPIO_FN_SDHID2_3, NULL);
734 gpio_request(GPIO_FN_SDHICMD2, NULL);
735 gpio_request(GPIO_FN_SDHICLK2, NULL);
736 gpio_request(GPIO_PORT14, NULL);
737 gpio_direction_output(GPIO_PORT14, 1); /* power */
740 gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
741 gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
743 /* enable FSI2 port A (ak4648) */
744 gpio_request(GPIO_FN_FSIACK, NULL);
745 gpio_request(GPIO_FN_FSIAILR, NULL);
746 gpio_request(GPIO_FN_FSIAIBT, NULL);
747 gpio_request(GPIO_FN_FSIAISLD, NULL);
748 gpio_request(GPIO_FN_FSIAOSLD, NULL);
751 gpio_request(GPIO_FN_VBUS_0, NULL);
753 #ifdef CONFIG_CACHE_L2X0
754 /* Early BRESP enable, Shared attribute override enable, 64K*8way */
755 l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
758 i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
759 i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
760 i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
762 sh73a0_add_standard_devices();
763 platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
766 static const char *kzm9g_boards_compat_dt[] __initdata = {
771 DT_MACHINE_START(KZM9G_DT, "kzm9g")
772 .map_io = sh73a0_map_io,
773 .init_early = sh73a0_add_early_devices,
774 .nr_irqs = NR_IRQS_LEGACY,
775 .init_irq = sh73a0_init_irq,
776 .handle_irq = gic_handle_irq,
777 .init_machine = kzm_init,
778 .init_late = shmobile_init_late,
779 .timer = &shmobile_timer,
780 .dt_compat = kzm9g_boards_compat_dt,