arch/arm64/boot/dts/rk3368-tb_mipi.dts

   1 /dts-v1/;
   2
   3 #include <dt-bindings/interrupt-controller/arm-gic.h>
   4 #include <dt-bindings/rkfb/rk_fb.h>
   5 #include "rk3368.dtsi"
   6 #include "../../../arm/boot/dts/vtl_ts_sdk8846.dtsi"
   7 //#include "../../../arm/boot/dts/lcd-b101ew05.dtsi"
   8 #include "../../../arm/boot/dts/lcd-tv080wum-mipi.dtsi"
   9 #include "rk3368-cif-sensor.dtsi"
  10 #include <dt-bindings/suspend/rockchip-rk3368.h>
  11
  12 / {
  13         chosen {
  14                 bootargs = "earlyprintk=uart8250-32bit,0xff690000";
  15         };
  16
  17         wireless-wlan {
  18                 compatible = "wlan-platdata";
  19                 rockchip,grf = <&grf>;
  20
  21                 /* wifi_chip_type - wifi chip define
  22                  * ap6210, ap6330, ap6335
  23                  * rtl8188eu, rtl8723bs, rtl8723bu
  24                  * esp8089
  25                 */
  26                 wifi_chip_type = "ap6335";
  27
  28                 sdio_vref = <1800>; //1800mv or 3300mv
  29
  30                 //keep_wifi_power_on;
  31
  32                 //power_ctrl_by_pmu;
  33                 power_pmu_regulator = "act_ldo3";
  34                 power_pmu_enable_level = <1>; //1->HIGH, 0->LOW
  35
  36                 //vref_ctrl_enable;
  37                 //vref_ctrl_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_HIGH>;
  38                 vref_pmu_regulator = "act_ldo3";
  39                 vref_pmu_enable_level = <1>; //1->HIGH, 0->LOW
  40
  41                 WIFI,poweren_gpio = <&gpio3 GPIO_A4 GPIO_ACTIVE_HIGH>;
  42                 WIFI,host_wake_irq = <&gpio3 GPIO_A6 GPIO_ACTIVE_HIGH>;
  43                 //WIFI,reset_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_LOW>;
  44
  45                 status = "okay";
  46         };
  47
  48         wireless-bluetooth {
  49                 compatible = "bluetooth-platdata";
  50
  51                 //wifi-bt-power-toggle;
  52
  53                 uart_rts_gpios = <&gpio2 GPIO_D3 GPIO_ACTIVE_LOW>;
  54                 pinctrl-names = "default","rts_gpio";
  55                 pinctrl-0 = <&uart0_rts>;
  56                 pinctrl-1 = <&uart0_rts_gpio>;
  57
  58                 BT,power_gpio = <&gpio3 GPIO_A3 GPIO_ACTIVE_HIGH>;
  59                 BT,reset_gpio = <&gpio3 GPIO_A5 GPIO_ACTIVE_HIGH>;
  60                 BT,wake_gpio = <&gpio3 GPIO_A2 GPIO_ACTIVE_HIGH>;
  61                 BT,wake_host_irq = <&gpio3 GPIO_A7 GPIO_ACTIVE_HIGH>;
  62
  63                 status = "okay";
  64         };
  65
  66         hallsensor {
  67                compatible = "hall_och165t";
  68                type = <SENSOR_TYPE_HALL>;
  69                irq-gpio = <&gpio0 GPIO_C0 IRQ_TYPE_EDGE_BOTH>;
  70         };
  71
  72         backlight: backlight {
  73                 compatible = "pwm-backlight";
  74                 pwms = <&pwm0 0 25000>;
  75                 brightness-levels = <255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240
  76                      239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220
  77                      219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200
  78                      199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180
  79                      179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160
  80                      159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140
  81                      139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120
  82                      119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100
  83                      99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70
  84                      69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40
  85                      39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
  86                      9 8 7 6 5 4 3 2 1 0>;
  87                 default-brightness-level = <200>;
  88                 enable-gpios = <&gpio0 GPIO_C4 GPIO_ACTIVE_HIGH>;
  89         };
  90
  91         pwm_regulator {
  92                 compatible = "rockchip_pwm_regulator";
  93                 pwms = <&pwm1 0 2000>;
  94                 rockchip,pwm_id= <1>;
  95                 rockchip,pwm_voltage_map= <925000 950000 975000 1000000 1025000 1050000 1075000 1100000 1125000 1150000 1175000 1200000 1225000 1250000 1275000 1300000 1325000 1350000 1375000 1400000>;
  96                 rockchip,pwm_voltage= <1000000>;
  97                 rockchip,pwm_min_voltage= <925000>;
  98                 rockchip,pwm_max_voltage= <1400000>;
  99                 rockchip,pwm_suspend_voltage= <950000>;
 100                 rockchip,pwm_coefficient= <475>;
 101                 regulators {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104                         pwm_reg0: regulator@0 {
 105                                 regulator-compatible = "pwm_dcdc1";
 106                                 regulator-name= "vdd_logic";
 107                                 regulator-min-microvolt = <925000>;
 108                                 regulator-max-microvolt = <1400000>;
 109                                 regulator-always-on;
 110                                 regulator-boot-on;
 111                         };
 112                 };
 113         };
 114
 115         codec_hdmi_i2s: codec-hdmi-i2s {
 116                 compatible = "hdmi-i2s";
 117         };
 118
 119         codec_hdmi_spdif: codec-hdmi-spdif {
 120                 compatible = "hdmi-spdif";
 121         };
 122
 123         rockchip-hdmi-i2s {
 124                 compatible = "rockchip-hdmi-i2s";
 125                 dais {
 126                         dai0 {
 127                                 audio-codec = <&codec_hdmi_i2s>;
 128                                 audio-controller = <&i2s0>;
 129                                 format = "i2s";
 130                                 //continuous-clock;
 131                                 //bitclock-inversion;
 132                                 //frame-inversion;
 133                                 //bitclock-master;
 134                                 //frame-master;
 135                         };
 136                 };
 137         };
 138
 139         rockchip-hdmi-spdif {
 140                 compatible = "rockchip-hdmi-spdif";
 141                 dais {
 142                         dai0 {
 143                                 audio-codec = <&codec_hdmi_spdif>;
 144                                 audio-controller = <&spdif>;
 145                         };
 146                 };
 147         };
 148
 149         rockchip-rt5631 {
 150                 compatible = "rockchip-rt5631";
 151                 dais {
 152                         dai0 {
 153                                 audio-codec = <&rt5631>;
 154                                 audio-controller = <&i2s0>;
 155                                 format = "i2s";
 156                                 //continuous-clock;
 157                                 //bitclock-inversion;
 158                                 //frame-inversion;
 159                                 //bitclock-master;
 160                                 //frame-master;
 161                         };
 162                 };
 163         };
 164
 165         rockchip-rt3224 {
 166                 compatible = "rockchip-rt3261";
 167                 dais {
 168                         dai0 {
 169                                 audio-codec = <&rt3261>;
 170                                 audio-controller = <&i2s0>;
 171                                 format = "i2s";
 172                                 //continuous-clock;
 173                                 //bitclock-inversion;
 174                                 //frame-inversion;
 175                                 //bitclock-master;
 176                                 //frame-master;
 177                         };
 178                         dai1 {
 179                                 audio-codec = <&rt3261>;
 180                                 audio-controller = <&i2s0>;
 181                                 format = "dsp_a";
 182                                 //continuous-clock;
 183                                 bitclock-inversion;
 184                                 //frame-inversion;
 185                                 //bitclock-master;
 186                                 //frame-master;
 187                         };
 188                 };
 189         };
 190
 191         io-domains {
 192                 compatible = "rockchip,rk3368-io-voltage-domain";
 193                 rockchip,grf = <&grf>;
 194                 rockchip,pmugrf = <&pmugrf>;
 195
 196                 /*GRF_IO_VSEL*/
 197                 dvp-supply = <&ldo7_reg>;      /*DVPIO_VDD*/
 198                 flash0-supply = <&dcdc2_reg>;  /*FLASH0_VDD*/
 199                 wifi-supply = <&ldo7_reg>;     /*APIO2_VDD*/
 200                 audio-supply = <&dcdc2_reg>;   /*APIO3_VDD*/
 201                 sdcard-supply = <&ldo1_reg>;   /*SDMMC0_VDD*/
 202                 gpio30-supply = <&dcdc2_reg>;  /*APIO1_VDD*/
 203                 gpio1830-supply = <&dcdc2_reg>;/*ADIO4_VDD*/
 204
 205                 /*PMU_GRF_IO_VSEL*/
 206                 pmu-supply = <&ldo5_reg>;      /*PMUIO_VDD*/
 207                 vop-supply = <&ldo5_reg>;      /*LCDC_VDD*/
 208         };
 209         test-power{
 210                 status = "okay";
 211         };
 212 };
 213
 214
 215 &gmac_clkin {
 216         clock-frequency = <125000000>;
 217 };
 218
 219 &gmac {
 220 //      pmu_regulator = "act_ldo5";
 221 //      power-gpio = <&gpio0 GPIO_A6 GPIO_ACTIVE_HIGH>;
 222         reset-gpio = <&gpio3 GPIO_B4 GPIO_ACTIVE_LOW>;
 223 //      phyirq-gpio = <&gpio0 GPIO_B1 GPIO_ACTIVE_LOW>;
 224         phy-mode = "rgmii";
 225         pinctrl-names = "default";
 226         pinctrl-0 = <&rgmii_pins>;
 227         clock_in_out = "input";
 228         tx_delay = <0x30>;
 229         rx_delay = <0x10>;
 230         status = "disabled"; //if want to use gmac, please set "okay"
 231 };
 232
 233 &pinctrl {
 234         //used for init some gpio
 235         init-gpios = <&gpio0 GPIO_A6 GPIO_ACTIVE_HIGH>;
 236
 237         gpio0_gpio {
 238                         gpio0_c7: gpio0-c7 {
 239                                 rockchip,pins = <0 GPIO_C7 RK_FUNC_GPIO &pcfg_pull_down>;
 240                         };
 241                         gpio0_a3: gpio0-a3 {
 242                                 rockchip,pins = <0 GPIO_A3 RK_FUNC_3 &pcfg_pull_none>;
 243                         };
 244                         gpio0_c2: gpio0-c2 {
 245                                 rockchip,pins = <0 GPIO_C2 RK_FUNC_GPIO &pcfg_pull_down>;
 246                         };
 247                         gpio0_c1: gpio0-c1 {
 248                                 rockchip,pins = <0 GPIO_C1 RK_FUNC_GPIO &pcfg_pull_up>;
 249                         };
 250                         //to add
 251                 };
 252
 253 };
 254
 255 &nandc0 {
 256 /*set "okay" both nand and emmc*/
 257 /*if using nand,emmc need disabled*/
 258         status = "okay";
 259 };
 260
 261 &nandc0reg {
 262         status = "disabled"; /* unused now,set "disabled"*/
 263 };
 264
 265 &emmc {
 266         clock-frequency = <100000000>;
 267         clock-freq-min-max = <400000 100000000>;
 268
 269     supports-highspeed;
 270         supports-emmc;
 271     bootpart-no-access;
 272
 273         //supports-sd;
 274         //supports-DDR_MODE; //you should set the two value in your project. only close in RK3288-SDK board.
 275         //caps2-mmc-hs200;
 276
 277     ignore-pm-notify;
 278         keep-power-in-suspend;
 279
 280         //poll-hw-reset
 281         status = "okay";
 282 };
 283
 284 &sdmmc {
 285                 clock-frequency = <37500000>;
 286                 clock-freq-min-max = <400000 37500000>;
 287                 supports-highspeed;
 288                 supports-sd;
 289                 broken-cd;
 290                 card-detect-delay = <200>;
 291
 292                 ignore-pm-notify;
 293                 keep-power-in-suspend;
 294
 295         vmmc-supply = <&ldo1_reg>;
 296                 status = "okay";
 297 };
 298
 299 &sdio {
 300                 clock-frequency = <50000000>;
 301                 clock-freq-min-max = <200000 50000000>;
 302                 supports-highspeed;
 303                 supports-sdio;
 304                 ignore-pm-notify;
 305                 keep-power-in-suspend;
 306                 //cap-sdio-irq;
 307                 status = "okay";
 308 };
 309
 310 &spi0 {
 311         status = "disabled";
 312         max-freq = <48000000>;
 313         /*
 314         spi_test@00 {
 315                 compatible = "rockchip,spi_test_bus0_cs0";
 316                 reg = <0>;
 317                 spi-max-frequency = <24000000>;
 318                 //spi-cpha;
 319                 //spi-cpol;
 320                 poll_mode = <0>;
 321                 type = <0>;
 322                 enable_dma = <0>;
 323
 324         };
 325
 326         spi_test@01 {
 327                 compatible = "rockchip,spi_test_bus0_cs1";
 328                 reg = <1>;
 329                 spi-max-frequency = <24000000>;
 330                 spi-cpha;
 331                 spi-cpol;
 332                 poll_mode = <0>;
 333                 type = <0>;
 334                 enable_dma = <0>;
 335         };
 336         */
 337 };
 338
 339 &spi1 {
 340         status = "disabled";
 341         max-freq = <48000000>;
 342         /*
 343         spi_test@10 {
 344                 compatible = "rockchip,spi_test_bus1_cs0";
 345                 reg = <0>;
 346                 spi-max-frequency = <24000000>;
 347                 //spi-cpha;
 348                 //spi-cpol;
 349                 poll_mode = <0>;
 350                 type = <0>;
 351                 enable_dma = <0>;
 352         };
 353         spi_test@11 {
 354                 compatible = "rockchip,spi_test_bus1_cs1";
 355                 reg = <1>;
 356                 spi-max-frequency = <24000000>;
 357                 //spi-cpha;
 358                 //spi-cpol;
 359                 poll_mode = <0>;
 360                 type = <0>;
 361                 enable_dma = <1>;
 362         };
 363         */
 364 };
 365
 366 &spi2 {
 367         status = "disabled";
 368         max-freq = <48000000>;
 369         /*
 370         spi_test@20 {
 371                 compatible = "rockchip,spi_test_bus2_cs0";
 372                 reg = <0>;
 373                 spi-max-frequency = <24000000>;
 374                 //spi-cpha;
 375                 //spi-cpol;
 376                 poll_mode = <0>;
 377                 type = <0>;
 378                 enable_dma = <0>;
 379         };
 380         */
 381 };
 382
 383 &uart_dbg {
 384         status = "okay";
 385 };
 386
 387 &uart_bt {
 388         status = "okay";
 389         dma-names = "!tx", "!rx";
 390         pinctrl-0 = <&uart0_xfer &uart0_cts>;
 391 };
 392
 393 &tsadc {
 394        tsadc-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
 395        //tsadc-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
 396        status = "okay";
 397 };
 398
 399 &i2c0 {
 400         status = "okay";
 401         syr827: syr827@40 {
 402                 compatible = "silergy,syr82x";
 403                 reg = <0x40>;
 404                 status = "okay";
 405                 regulators {
 406                         #address-cells = <1>;
 407                         #size-cells = <0>;
 408                         syr827_dc1: regulator@0 {
 409                         reg = <0>;
 410                         regulator-compatible = "syr82x_dcdc1";
 411                         regulator-name = "vdd_arm";
 412                         regulator-min-microvolt = <712500>;
 413                         regulator-max-microvolt = <1500000>;
 414                         regulator-always-on;
 415                         regulator-boot-on;
 416                         regulator-initial-mode = <0x2>;
 417                         regulator-initial-state = <3>;
 418                         regulator-state-mem {
 419                                 regulator-state-mode = <0x2>;
 420                                 regulator-state-disabled;
 421                                 regulator-state-uv = <900000>;
 422                         };
 423                 };
 424            };
 425         };
 426         syr828: syr828@41 {
 427                 compatible = "silergy,syr82x";
 428                 reg = <0x41>;
 429                 status = "disabled";
 430                 regulators {
 431                         #address-cells = <1>;
 432                         #size-cells = <0>;
 433                         syr828_dc1: regulator@0 {
 434                         reg = <0>;
 435                         regulator-compatible = "syr82x_dcdc1";
 436                         regulator-name = "vdd_gpu";
 437                         regulator-min-microvolt = <712500>;
 438                         regulator-max-microvolt = <1500000>;
 439                         regulator-always-on;
 440                         regulator-boot-on;
 441                         regulator-initial-mode = <0x2>;
 442                         regulator-initial-state = <3>;
 443                         regulator-state-mem {
 444                                 regulator-state-mode = <0x2>;
 445                                 regulator-state-enabled;
 446                                 regulator-state-uv = <900000>;
 447                         };
 448                 };
 449            };
 450         };
 451         act8846: act8846@5a {
 452                 reg = <0x5a>;
 453                 status = "okay";
 454         };
 455
 456         rk818: rk818@1c {
 457                 reg = <0x1c>;
 458                 status = "okay";
 459         };
 460
 461         CW2015@62 {
 462                 compatible = "cw201x";
 463                 reg = <0x62>;
 464                 dc_det_gpio = <&gpio0 GPIO_C1 GPIO_ACTIVE_LOW>;
 465                 bat_low_gpio = <&gpio0 GPIO_C2 GPIO_ACTIVE_LOW>;
 466                 chg_ok_gpio = <&gpio0 GPIO_D3 GPIO_ACTIVE_HIGH>;
 467                 bat_config_info = <0x15 0x42 0x60 0x59 0x52 0x58 0x4D 0x48 0x48 0x44 0x44 0x46 0x49 0x48 0x32
 468                         0x24 0x20 0x17 0x13 0x0F 0x19 0x3E 0x51 0x45 0x08 0x76 0x0B 0x85 0x0E 0x1C 0x2E 0x3E 0x4D 0x52 0x52
 469                         0x57 0x3D 0x1B 0x6A 0x2D 0x25 0x43 0x52 0x87 0x8F 0x91 0x94 0x52 0x82 0x8C 0x92 0x96 0xFF 0x7B 0xBB
 470                         0xCB 0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x46 0xAE>;
 471                 is_dc_charge = <1>;
 472                 is_usb_charge = <0>;
 473         };
 474
 475         rtc@51 {
 476                 compatible = "rtc,hym8563";
 477                 reg = <0x51>;
 478                 irq_gpio = <&gpio0 GPIO_A1 IRQ_TYPE_EDGE_FALLING>;
 479         };
 480
 481 };
 482
 483 &i2c1 {
 484         status = "okay";
 485
 486         mpu6050:mpu@68{
 487                 compatible = "mpu6050";
 488                 reg = <0x68>;
 489                 mpu-int_config = <0x10>;
 490                 mpu-level_shifter = <0>;
 491                 mpu-orientation = <0 1 0 1 0 0 0 0 1>;
 492                 orientation-x= <0>;
 493                 orientation-y= <1>;
 494                 orientation-z= <1>;
 495                 irq-gpio = <&gpio3 GPIO_B6 IRQ_TYPE_LEVEL_LOW>;
 496                 mpu-debug = <0>;
 497         };
 498
 499
 500         ak8963:compass@0d{
 501                 compatible = "mpu_ak8963";
 502                 reg = <0x0d>;
 503                 compass-bus = <0>;
 504                 compass-adapt_num = <0>;
 505                 compass-orientation = <1 0 0 0 1 0 0 0 1>;
 506                 orientation-x= <0>;
 507                 orientation-y= <0>;
 508                 orientation-z= <1>;
 509                 compass-debug = <1>;
 510                 status = "okay";
 511         };
 512
 513         rt3261: rt3261@1c {
 514                 compatible = "rt3261";
 515                 reg = <0x1c>;
 516                 spk-num= <2>;
 517                 modem-input-mode = <1>;
 518                 lout-to-modem_mode = <1>;
 519                 spk-amplify = <2>;
 520         };
 521 };
 522
 523 &i2c2 {
 524         status = "okay";
 525
 526         rt5631: rt5631@1a {
 527                 compatible = "rt5631";
 528                 reg = <0x1a>;
 529         };
 530
 531         touchscreen@14 {
 532                 compatible = "goodix,gt9xx";
 533                 reg = <0x14>;
 534                 touch-gpio = <&gpio0 GPIO_B4 IRQ_TYPE_LEVEL_LOW>;
 535                 reset-gpio = <&gpio0 GPIO_B3 GPIO_ACTIVE_HIGH>;
 536                 max-x = <1200>;
 537                 max-y = <1900>;
 538                 tp-size = <911>;
 539         };
 540 };
 541
 542 &i2c3 {
 543         status = "okay";
 544 };
 545
 546 &i2c4 {
 547         status = "okay";
 548
 549
 550 };
 551
 552 &i2c5 {
 553         status = "disable";
 554 };
 555
 556 &fb {
 557         rockchip,disp-mode = <NO_DUAL>;
 558         rockchip,uboot-logo-on = <0>;
 559 };
 560
 561 &rk_screen {
 562          display-timings = <&disp_timings>;
 563 };
 564
 565 /*&lvds {
 566         status = "okay";
 567         pinctrl-names = "lcdc", "sleep";
 568         pinctrl-0 = <&lcdc_lcdc>;
 569         pinctrl-1 = <&lcdc_gpio>;
 570 };*/
 571
 572 &lcdc {
 573         status = "okay";
 574         backlight = <&backlight>;
 575         rockchip,mirror = <NO_MIRROR>;
 576         rockchip,cabc_mode = <0>;
 577         rockchip,fb-win-map = <FB_DEFAULT_ORDER>;
 578         power_ctr: power_ctr {
 579                 rockchip,debug = <0>;
 580                 lcd_en:lcd_en {
 581                         rockchip,power_type = <GPIO>;
 582                         gpios = <&gpio0 GPIO_C6 GPIO_ACTIVE_HIGH>;
 583                         rockchip,delay = <10>;
 584                 };
 585
 586                 lcd_cs:lcd_cs {
 587                         rockchip,power_type = <GPIO>;
 588                         gpios = <&gpio0 GPIO_C5 GPIO_ACTIVE_HIGH>;
 589                         rockchip,delay = <10>;
 590                 };
 591
 592                 /*lcd_rst:lcd_rst {
 593                         rockchip,power_type = <GPIO>;
 594                         gpios = <&gpio3 GPIO_D6 GPIO_ACTIVE_HIGH>;
 595                         rockchip,delay = <5>;
 596                 };*/
 597         };
 598 };
 599
 600
 601 &hdmi {
 602         status = "okay";
 603 };
 604
 605 &adc {
 606         status = "okay";
 607
 608         rockchip_headset {
 609                 compatible = "rockchip_headset";
 610                 headset_gpio = <&gpio0 GPIO_C7 GPIO_ACTIVE_LOW>;
 611                 pinctrl-names = "default";
 612                 pinctrl-0 = <&gpio0_c7>;//gpio0_c7
 613                 rockchip,headset_wakeup = <0>;
 614        /*
 615                hook_gpio = ;
 616                hook_down_type = ; //interrupt hook key down status
 617                 */
 618        };
 619
 620         key {
 621                 compatible = "rockchip,key";
 622                 io-channels = <&adc 1>;
 623
 624                 vol-up-key {
 625                         linux,code = <115>;
 626                         label = "volume up";
 627                         rockchip,adc_value = <1>;
 628                 };
 629
 630                 vol-down-key {
 631                         linux,code = <114>;
 632                         label = "volume down";
 633                         rockchip,adc_value = <170>;
 634                 };
 635
 636                 power-key {
 637                         gpios = <&gpio0 GPIO_A2 GPIO_ACTIVE_LOW>;
 638                         linux,code = <116>;
 639                         label = "power";
 640                         gpio-key,wakeup;
 641                 };
 642
 643                 menu-key {
 644                         linux,code = <59>;
 645                         label = "menu";
 646                         rockchip,adc_value = <355>;
 647                 };
 648
 649                 home-key {
 650                         linux,code = <102>;
 651                         label = "home";
 652                         rockchip,adc_value = <746>;
 653                 };
 654
 655                 back-key {
 656                         linux,code = <158>;
 657                         label = "back";
 658                         rockchip,adc_value = <560>;
 659                 };
 660
 661                 camera-key {
 662                         linux,code = <212>;
 663                         label = "camera";
 664                         rockchip,adc_value = <450>;
 665                 };
 666         };
 667 };
 668
 669 &pwm0 {
 670         status = "okay";
 671 };
 672
 673 &clk_core_b_dvfs_table {
 674         operating-points = <
 675                 /* KHz    uV */
 676                 216000 950000
 677                 312000 950000
 678                 408000 950000
 679                 600000 950000
 680                 696000 950000
 681                 816000 975000
 682                 1008000 1050000
 683                 1200000 1150000
 684                 1296000 1200000
 685                 1416000 1300000
 686                 1512000 1350000
 687                 >;
 688         status = "okay";
 689 };
 690
 691 &clk_core_l_dvfs_table {
 692         operating-points = <
 693                 /* KHz    uV */
 694                 216000 950000
 695                 312000 950000
 696                 408000 950000
 697                 600000 950000
 698                 696000 975000
 699                 816000 1025000
 700                 1008000 1125000
 701                 1200000 1225000
 702                 >;
 703         status = "okay";
 704 };
 705
 706 &clk_gpu_dvfs_table {
 707         operating-points = <
 708                 /* KHz    uV */
 709                 200000 950000
 710                 288000 1025000
 711                 400000 1050000
 712                 576000 1200000
 713                 >;
 714 };
 715
 716 &clk_ddr_dvfs_table {
 717         operating-points = <
 718                 /* KHz    uV */
 719                 96000  950000
 720                 192000 950000
 721                 300000 950000
 722                 324000 975000
 723                 396000 1000000
 724                 528000 1050000
 725                 600000 1075000
 726                 696000 1100000
 727                 792000 1125000
 728                 >;
 729
 730         freq-table = <
 731                 /*status                freq(KHz)*/
 732                 SYS_STATUS_NORMAL       600000
 733                 SYS_STATUS_SUSPEND      192000
 734                 SYS_STATUS_VIDEO_1080P  324000
 735                 SYS_STATUS_VIDEO_4K     600000
 736                 SYS_STATUS_PERFORMANCE  600000
 737                 SYS_STATUS_DUALVIEW     600000
 738                 SYS_STATUS_BOOST        396000
 739                 SYS_STATUS_ISP          528000
 740                 >;
 741         auto-freq-table = <
 742                 240000
 743                 324000
 744                 396000
 745                 528000
 746                 >;
 747         auto-freq=<0>;
 748         status="okay";
 749 };
 750
 751 &dwc_control_usb {
 752                 host_drv_gpio = <&gpio0 GPIO_A4 GPIO_ACTIVE_LOW>;
 753                 otg_drv_gpio = <&gpio0 GPIO_D1 GPIO_ACTIVE_LOW>;
 754
 755                 rockchip,remote_wakeup;
 756                 rockchip,usb_irq_wakeup;
 757         };
 758
 759 /include/ "../../../arm/boot/dts/act8846.dtsi"
 760 &act8846 {
 761         gpios =<&gpio0 GPIO_B0 GPIO_ACTIVE_LOW>,<&gpio0 GPIO_A3 GPIO_ACTIVE_HIGH>;
 762         act8846,system-power-controller;
 763
 764         regulators {
 765
 766                 dcdc1_reg: regulator@0{
 767                         regulator-name= "act_dcdc1";
 768                         regulator-min-microvolt = <1200000>;
 769                         regulator-max-microvolt = <1200000>;
 770                         regulator-always-on;
 771                         regulator-boot-on;
 772                 };
 773
 774                 dcdc2_reg: regulator@1 {
 775                         regulator-name= "vccio";
 776                         regulator-min-microvolt = <3300000>;
 777                         regulator-max-microvolt = <3300000>;
 778                         regulator-initial-state = <3>;
 779                         regulator-state-mem {
 780                                 regulator-state-enabled;
 781                                 regulator-state-uv = <3300000>;
 782                         };
 783                 };
 784
 785                 dcdc3_reg: regulator@2 {
 786                         regulator-name= "vdd_logic";
 787                         regulator-min-microvolt = <700000>;
 788                         regulator-max-microvolt = <1500000>;
 789                         regulator-initial-state = <3>;
 790                         regulator-state-mem {
 791                                 regulator-state-enabled;
 792                                 regulator-state-uv = <1000000>;
 793                         };
 794
 795                 };
 796
 797                 dcdc4_reg: regulator@3 {
 798                         regulator-name= "act_dcdc4";
 799                         regulator-min-microvolt = <2000000>;
 800                         regulator-max-microvolt = <2000000>;
 801                                 regulator-initial-state = <3>;
 802                         regulator-state-mem {
 803                                 regulator-state-enabled;
 804                                 regulator-state-uv = <2000000>;
 805                         };
 806                 };
 807
 808                 ldo1_reg: regulator@4 {
 809                         regulator-name= "vccio_sd";
 810                         regulator-min-microvolt = <1800000>;
 811                         regulator-max-microvolt = <3300000>;
 812
 813                 };
 814
 815                 ldo2_reg: regulator@5 {
 816                         regulator-name= "act_ldo2";
 817                         regulator-min-microvolt = <1000000>;
 818                         regulator-max-microvolt = <1000000>;
 819
 820                 };
 821
 822                 ldo3_reg: regulator@6 {
 823                         regulator-name= "act_ldo3";
 824                         regulator-min-microvolt = <3300000>;
 825                         regulator-max-microvolt = <3300000>;
 826
 827                 };
 828
 829                 ldo4_reg:regulator@7 {
 830                         regulator-name= "act_ldo4";
 831                         regulator-min-microvolt = <3300000>;
 832                         regulator-max-microvolt = <3300000>;
 833
 834                 };
 835
 836                 ldo5_reg: regulator@8 {
 837                         regulator-name= "act_ldo5";
 838                         regulator-min-microvolt = <3300000>;
 839                         regulator-max-microvolt = <3300000>;
 840
 841                 };
 842
 843                 ldo6_reg: regulator@9 {
 844                         regulator-name= "act_ldo6";
 845                         regulator-min-microvolt = <1000000>;
 846                         regulator-max-microvolt = <1000000>;
 847                         regulator-initial-state = <3>;
 848                         regulator-state-mem {
 849                                 regulator-state-enabled;
 850                         };
 851
 852                 };
 853
 854                 ldo7_reg: regulator@10 {
 855                         regulator-name= "vcc_18";
 856                         regulator-min-microvolt = <1800000>;
 857                         regulator-max-microvolt = <1800000>;
 858                         regulator-initial-state = <3>;
 859                         regulator-state-mem {
 860                                 regulator-state-enabled;
 861                         };
 862
 863                 };
 864
 865                 ldo8_reg: regulator@11 {
 866                         regulator-name= "act_ldo8";
 867                         regulator-min-microvolt = <1800000>;
 868                         regulator-max-microvolt = <1800000>;
 869
 870                 };
 871         };
 872 };
 873
 874 /include/ "../../../arm/boot/dts/rk818.dtsi"
 875 &rk818 {
 876         gpios =<&gpio0 GPIO_A1 GPIO_ACTIVE_HIGH>,<&gpio0 GPIO_A0 GPIO_ACTIVE_LOW>;
 877         rk818,system-power-controller;
 878         pinctrl-names = "default";
 879         pinctrl-0 = <&gpio0_c1>;
 880 rk818,support_dc_chg = <1>;/*1:dc chg; 0:usb chg*/
 881         regulators {
 882
 883                 rk818_dcdc1_reg: regulator@0{
 884                         regulator-name= "vdd_logic";/*vcc arm*/
 885                         regulator-min-microvolt = <700000>;/*<725000>;*/
 886                         regulator-max-microvolt = <1500000>;
 887                         regulator-initial-mode = <0x2>;
 888                         regulator-initial-state = <3>;
 889                         regulator-state-mem {
 890                                 regulator-state-mode = <0x2>;
 891                                 regulator-state-enabled;
 892                                 regulator-state-uv =<1100000>;
 893                         };
 894                 };
 895
 896                 rk818_dcdc2_reg: regulator@1 {
 897                         regulator-name= "rk818_dcdc2";/*vcc gpu*/
 898                         regulator-min-microvolt = <700000>;
 899                         regulator-max-microvolt = <1200000>;
 900                         regulator-initial-mode = <0x2>;
 901                         regulator-initial-state = <3>;
 902                         regulator-state-mem {
 903                                 regulator-state-mode = <0x2>;
 904                                 regulator-state-enabled;
 905                                 regulator-state-uv = <1200000>;
 906                         };
 907                 };
 908
 909                 rk818_dcdc3_reg: regulator@2 {
 910                         regulator-name= "rk818_dcdc3";
 911                         regulator-min-microvolt = <1200000>;
 912                         regulator-max-microvolt = <1200000>;
 913                         regulator-initial-mode = <0x2>;
 914                         regulator-initial-state = <3>;
 915                         regulator-state-mem {
 916                                 regulator-state-mode = <0x2>;
 917                                 regulator-state-enabled;
 918                                 regulator-state-uv = <1200000>;
 919                         };
 920                 };
 921
 922                 rk818_dcdc4_reg: regulator@3 {
 923                         regulator-name= "vccio";
 924                         regulator-min-microvolt = <3000000>;
 925                         regulator-max-microvolt = <3000000>;
 926                         regulator-initial-mode = <0x2>;
 927                         regulator-initial-state = <3>;
 928                         regulator-state-mem {
 929                                 regulator-state-mode = <0x2>;
 930                                 regulator-state-enabled;
 931                                 regulator-state-uv = <3000000>;
 932                         };
 933                 };
 934
 935                 rk818_ldo1_reg: regulator@4 {
 936                         regulator-name= "rk818_ldo1";
 937                         regulator-min-microvolt = <3300000>;
 938                         regulator-max-microvolt = <3300000>;
 939                         regulator-initial-state = <3>;
 940                         regulator-state-mem {
 941                                 regulator-state-enabled;
 942                                 regulator-state-uv = <3300000>;
 943                         };
 944                 };
 945
 946                 rk818_ldo2_reg: regulator@5 {
 947                         regulator-name= "vcc_tp";
 948                         regulator-min-microvolt = <3000000>;
 949                         regulator-max-microvolt = <3000000>;
 950                         regulator-initial-state = <3>;
 951                         regulator-state-mem {
 952                                 regulator-state-enabled;
 953                                 regulator-state-uv = <3000000>;
 954                         };
 955                 };
 956
 957                 rk818_ldo3_reg: regulator@6 {
 958                         regulator-name= "rk818_ldo3";
 959                         regulator-min-microvolt = <1000000>;
 960                         regulator-max-microvolt = <1000000>;
 961                         regulator-initial-state = <3>;
 962                         regulator-state-mem {
 963                                 regulator-state-enabled;
 964                                 regulator-state-uv = <1000000>;
 965                         };
 966                 };
 967
 968                 rk818_ldo4_reg:regulator@7 {
 969                         regulator-name= "rk818_ldo4";
 970                         regulator-min-microvolt = <1800000>;
 971                         regulator-max-microvolt = <1800000>;
 972                         regulator-initial-state = <3>;
 973                         regulator-state-mem {
 974                                 regulator-state-disabled;
 975                                 regulator-state-uv = <1800000>;
 976                         };
 977                 };
 978
 979                 rk818_ldo5_reg: regulator@8 {
 980                         regulator-name= "rk818_ldo5";
 981                         regulator-min-microvolt = <1800000>;
 982                         regulator-max-microvolt = <1800000>;
 983                         regulator-initial-state = <3>;
 984                         regulator-state-mem {
 985                                 regulator-state-enabled;
 986                                 regulator-state-uv = <1800000>;
 987                         };
 988                 };
 989
 990                 rk818_ldo6_reg: regulator@9 {
 991                         regulator-name= "rk818_ldo6";
 992                         regulator-min-microvolt = <1000000>;
 993                         regulator-max-microvolt = <1000000>;
 994                         regulator-initial-state = <3>;
 995                         regulator-state-mem {
 996                                 regulator-state-disabled;
 997                                 regulator-state-uv = <1000000>;
 998                         };
 999                 };
1000
1001                 rk818_ldo7_reg: regulator@10 {
1002                         regulator-name= "rk818_ldo7";
1003                         regulator-min-microvolt = <1800000>;
1004                         regulator-max-microvolt = <1800000>;
1005                         regulator-initial-state = <3>;
1006                         regulator-state-mem {
1007                                 regulator-state-enabled;
1008                                 regulator-state-uv = <1800000>;
1009                         };
1010                 };
1011
1012                 rk818_ldo8_reg: regulator@11 {
1013                         regulator-name= "rk818_ldo8";
1014                         regulator-min-microvolt = <1800000>;
1015                         regulator-max-microvolt = <1800000>;
1016                         regulator-initial-state = <3>;
1017                         regulator-state-mem {
1018                                 regulator-state-enabled;
1019                                 regulator-state-uv = <1800000>;
1020                         };
1021                 };
1022
1023                 rk818_ldo9_reg: regulator@12 {
1024                         regulator-name= "vccio_sd";
1025                         regulator-min-microvolt = <1800000>;
1026                         regulator-max-microvolt = <3300000>;
1027                         regulator-initial-state = <3>;
1028                         regulator-state-mem {
1029                                 regulator-state-enabled;
1030                                 regulator-state-uv = <3300000>;
1031                         };
1032                 };
1033
1034                 rk818_ldo10_reg: regulator@13 {
1035                         regulator-name= "rk818_ldo10";
1036                         regulator-state-mem {
1037                                 regulator-state-disabled;
1038                         };
1039                 };
1040         };
1041
1042        battery {
1043                 ocv_table = <3350 3677 3693 3719 3752
1044                              3770 3775 3778 3785 3796
1045                              3812 3839 3881 3907 3933
1046                              3958 3978 4033 4087 4123
1047                              4174 >;
1048                 design_capacity = <8650>;
1049                 design_qmax = <8800>;
1050                 max_overcharge = <100>;
1051                 max_input_currentmA  = <3000>;
1052                 max_chrg_currentmA = <1800>;
1053                 max_charge_voltagemV = <4200>;
1054                 sleep_enter_current = <600>;
1055                 sleep_exit_current = <600>;
1056                 power_off_thresd = <3400>;
1057                 chrg_diff_voltagemV = <0>;
1058                 virtual_power = <1>;
1059                 support_usb_adp = <0>;
1060                 support_dc_adp = <1>;
1061                 dc_det_gpio = <&gpio0 GPIO_C1 GPIO_ACTIVE_LOW>;
1062         };
1063 };
1064
1065
1066 &ion_cma {
1067        reg = <0x00000000 0x00000000>; /* 0MB */
1068 };
1069
1070 &rk3368_cif_sensor{
1071         status = "okay";
1072 };
1073
1074 &rockchip_suspend {
1075                 rockchip,ctrbits = <
1076                         (0
1077                         | RKPM_SLP_ARMOFF
1078                         | RKPM_SLP_PMU_PLLS_PWRDN
1079                         | RKPM_SLP_PMU_PMUALIVE_32K
1080                         | RKPM_SLP_SFT_PLLS_DEEP
1081                         | RKPM_SLP_PMU_DIS_OSC
1082                         | RKPM_SLP_SFT_PD_NBSCUS
1083                         )
1084                         >;
1085         };
1086
1087 &dsihost0{
1088         status = "okay";
1089 };
1090 /*
1091 &dwc_control_usb {
1092         usb_uart {
1093                 status = "disabled";
1094         };
1095 };
1096 */