2 * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This library is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This library is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include "rk3328.dtsi"
47 model = "Rockchip RK3328 EVB";
48 compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
51 bootargs = "rockchip_jtag earlyprintk=uart8250-32bit,0xff130000";
55 compatible = "rockchip,fiq-debugger";
56 rockchip,serial-id = <2>;
57 rockchip,signal-irq = <145>;
58 rockchip,wake-irq = <0>;
59 /* If enable uart uses irq instead of fiq */
60 rockchip,irq-mode-enable = <0>;
61 rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
65 gmac_clkin: external-gmac-clock {
66 compatible = "fixed-clock";
67 clock-frequency = <125000000>;
68 clock-output-names = "gmac_clkin";
72 vcc_phy: vcc-phy-regulator {
73 compatible = "regulator-fixed";
74 regulator-name = "vcc_phy";
79 sdio_pwrseq: sdio-pwrseq {
80 compatible = "mmc-pwrseq-simple";
81 pinctrl-names = "default";
82 pinctrl-0 = <&wifi_enable_h>;
85 * On the module itself this is one of these (depending
86 * on the actual card populated):
87 * - SDIO_RESET_L_WL_REG_ON
88 * - PDN (power down when low)
90 reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
94 compatible = "wlan-platdata";
95 rockchip,grf = <&grf>;
96 wifi_chip_type = "ap6354";
98 WIFI,host_wake_irq = <&gpio1 19 GPIO_ACTIVE_HIGH>;
105 cpu-supply = <&vdd_arm>;
113 keep-power-in-suspend;
114 max-frequency = <150000000>;
115 mmc-pwrseq = <&sdio_pwrseq>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
129 max-frequency = <150000000>;
131 pinctrl-names = "default";
132 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
150 phy-supply = <&vcc_phy>;
152 clock_in_out = "input";
153 snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
154 snps,reset-active-low;
155 snps,reset-delays-us = <0 10000 50000>;
156 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
157 assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
158 pinctrl-names = "default";
159 pinctrl-0 = <&rgmiim1_pins>;
168 vccio1-supply = <&vcc_io>;
169 vccio2-supply = <&vcc_18emmc>;
170 vccio3-supply = <&vcc_io>;
171 vccio4-supply = <&vdd_18>;
172 vccio5-supply = <&vcc_io>;
173 vccio6-supply = <&vcc_io>;
174 pmuio-supply = <&vcc_io>;
182 otg-vbus-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
185 u2phy_host: host-port {
189 u2phy_otg: otg-port {
195 vbus-drv-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
208 dr_mode = "peripheral";
232 compatible = "rockchip,rk805";
235 interrupt-parent = <&gpio2>;
236 interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&pmic_int_l>;
239 rockchip,system-power-controller;
257 compatible = "rk805-regulator";
259 #address-cells = <1>;
262 vdd_logic: RK805_DCDC1@0 {
263 regulator-compatible = "RK805_DCDC1";
264 regulator-name = "vdd_logic";
265 regulator-min-microvolt = <712500>;
266 regulator-max-microvolt = <1450000>;
267 regulator-initial-mode = <0x1>;
268 regulator-ramp-delay = <12500>;
271 regulator-state-mem {
272 regulator-mode = <0x2>;
273 regulator-on-in-suspend;
274 regulator-suspend-microvolt = <1000000>;
278 vdd_arm: RK805_DCDC2@1 {
279 regulator-compatible = "RK805_DCDC2";
280 regulator-name = "vdd_arm";
281 regulator-min-microvolt = <712500>;
282 regulator-max-microvolt = <1450000>;
283 regulator-initial-mode = <0x1>;
284 regulator-ramp-delay = <12500>;
287 regulator-state-mem {
288 regulator-mode = <0x2>;
289 regulator-on-in-suspend;
290 regulator-suspend-microvolt = <950000>;
294 vcc_ddr: RK805_DCDC3@2 {
295 regulator-compatible = "RK805_DCDC3";
296 regulator-name = "vcc_ddr";
297 regulator-initial-mode = <0x1>;
300 regulator-state-mem {
301 regulator-mode = <0x2>;
302 regulator-on-in-suspend;
306 vcc_io: RK805_DCDC4@3 {
307 regulator-compatible = "RK805_DCDC4";
308 regulator-name = "vcc_io";
309 regulator-min-microvolt = <3300000>;
310 regulator-max-microvolt = <3300000>;
311 regulator-initial-mode = <0x1>;
314 regulator-state-mem {
315 regulator-mode = <0x2>;
316 regulator-on-in-suspend;
317 regulator-suspend-microvolt = <3300000>;
321 vdd_18: RK805_LDO1@4 {
322 regulator-compatible = "RK805_LDO1";
323 regulator-name = "vdd_18";
324 regulator-min-microvolt = <1800000>;
325 regulator-max-microvolt = <1800000>;
328 regulator-state-mem {
329 regulator-on-in-suspend;
330 regulator-suspend-microvolt = <1800000>;
334 vcc_18emmc: RK805_LDO2@5 {
335 regulator-compatible = "RK805_LDO2";
336 regulator-name = "vcc_18emmc";
337 regulator-min-microvolt = <1800000>;
338 regulator-max-microvolt = <1800000>;
341 regulator-state-mem {
342 regulator-on-in-suspend;
343 regulator-suspend-microvolt = <1800000>;
347 vdd_10: RK805_LDO3@6 {
348 regulator-compatible = "RK805_LDO3";
349 regulator-name = "vdd_10";
350 regulator-min-microvolt = <1000000>;
351 regulator-max-microvolt = <1000000>;
354 regulator-state-mem {
355 regulator-on-in-suspend;
356 regulator-suspend-microvolt = <1000000>;
365 pmic_int_l: pmic-int-l {
367 <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */
372 wifi_enable_h: wifi-enable-h {
374 <1 18 RK_FUNC_GPIO &pcfg_pull_none>;