2 * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include <dt-bindings/pinctrl/rk.h>
45 #include "rk3399.dtsi"
46 #include "rk3399-android-next.dtsi"
47 #include "rk3399-opp.dtsi"
48 #include <dt-bindings/sensor-dev.h>
49 #include <dt-bindings/pwm/pwm.h>
52 compatible = "rockchip,rk3399-mid", "rockchip,rk3399";
54 edp_panel: edp-panel {
55 compatible = "simple-panel";
56 backlight = <&backlight>;
57 power-supply = <&vcc3v3_s0>;
58 enable-gpios = <&gpio3 GPIO_A0 GPIO_ACTIVE_HIGH>;
59 bus-format = <MEDIA_BUS_FMT_RGB666_1X18>;
62 panel_in_edp: endpoint {
63 remote-endpoint = <&edp_out_panel>;
68 usb_cam_gpio: usb-cam-gpio {
69 compatible = "usb-cam-gpio";
70 pinctrl-names = "default";
71 pinctrl-0 = <&usb_cam_on_gpio>;
72 hd-cam-gpios = <&gpio3 GPIO_A1 GPIO_ACTIVE_HIGH>;
73 ir-cam-gpios = <&gpio3 GPIO_A2 GPIO_ACTIVE_HIGH>;
78 compatible = "regulator-fixed";
79 regulator-name = "vcc_sys";
82 regulator-min-microvolt = <3900000>;
83 regulator-max-microvolt = <3900000>;
86 vcc3v3_sys: vcc3v3-sys {
87 compatible = "regulator-fixed";
88 regulator-name = "vcc3v3_sys";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
95 vcc5v0_host: vcc5v0-host-regulator {
96 compatible = "regulator-fixed";
98 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
99 pinctrl-names = "default";
100 pinctrl-0 = <&host_vbus_drv>;
101 regulator-name = "vcc5v0_host";
106 compatible = "pwm-regulator";
107 pwms = <&pwm2 0 25000 0>;
108 rockchip,pwm_id= <2>;
109 rockchip,pwm_voltage = <1000000>;
110 regulator-name = "vdd_log";
111 regulator-min-microvolt = <750000>;
112 regulator-max-microvolt = <1350000>;
117 backlight: backlight {
118 compatible = "pwm-backlight";
119 pwms = <&pwm0 0 25000 0>;
120 brightness-levels = <
121 0 1 51 52 52 53 53 54
122 54 55 55 56 56 57 57 58
123 58 59 59 60 61 61 62 63
124 63 64 65 65 66 67 67 68
125 69 69 70 71 71 72 73 73
126 74 75 75 76 77 77 78 79
127 79 80 80 81 81 82 83 83
128 84 85 86 86 87 88 89 89
129 90 91 92 92 93 94 95 95
130 96 97 98 98 99 100 101 101
131 102 103 104 104 105 106 107 107
132 108 109 110 110 111 112 113 113
133 114 115 116 116 117 118 119 119
134 120 121 122 122 123 124 125 125
135 126 127 128 128 129 130 131 131
136 132 133 134 134 135 136 137 137
137 138 139 140 140 141 142 143 143
138 144 145 146 146 147 148 149 149
139 150 151 152 152 153 154 155 155
140 156 157 158 158 159 160 161 161
141 162 163 164 164 165 166 167 167
142 168 169 170 170 171 172 173 173
143 174 175 176 176 177 178 179 179
144 180 181 182 182 183 184 185 185
145 186 187 188 188 189 190 191 191
146 216 217 218 218 219 220 221 221
147 222 223 224 224 225 226 227 227
148 228 229 230 230 231 232 233 233
149 234 235 236 236 237 238 239 239
150 240 241 242 242 243 244 245 245
151 246 247 248 248 249 250 251 251
152 252 253 254 254 255 255 255 255>;
153 default-brightness-level = <200>;
154 enable-gpios = <&gpio3 GPIO_A4 GPIO_ACTIVE_HIGH>;
157 vcc_phy: vcc-phy-regulator {
158 compatible = "regulator-fixed";
159 regulator-name = "vcc_phy";
165 compatible = "simple-audio-card";
166 simple-audio-card,format = "i2s";
167 simple-audio-card,name = "rockchip,cx2072x-codec";
168 simple-audio-card,mclk-fs = <256>;
169 simple-audio-card,widgets =
170 "Microphone", "Microphone Jack",
171 "Line", "Microphone Headset",
172 "Headphone", "Headphone Jack",
173 "Speaker", "Speaker External";
174 simple-audio-card,routing =
175 "PORTC", "Microphone Jack",
176 "PortD Mic Bias", "Microphone Headset",
177 "Headphone Jack", "PORTA",
178 "Speaker External", "PORTG";
179 simple-audio-card,cpu {
182 simple-audio-card,codec {
183 sound-dai = <&cx2072x>;
188 compatible = "simple-audio-card";
189 simple-audio-card,name = "rockchip,spdif";
190 simple-audio-card,cpu {
191 sound-dai = <&spdif>;
193 simple-audio-card,codec {
194 sound-dai = <&spdif_out>;
198 spdif_out: spdif-out {
199 compatible = "linux,spdif-dit";
200 #sound-dai-cells = <0>;
203 sdio_pwrseq: sdio-pwrseq {
204 compatible = "mmc-pwrseq-simple";
206 clock-names = "ext_clock";
207 pinctrl-names = "default";
208 pinctrl-0 = <&wifi_enable_h>;
211 * On the module itself this is one of these (depending
212 * on the actual card populated):
213 * - SDIO_RESET_L_WL_REG_ON
214 * - PDN (power down when low)
216 reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
220 compatible = "gpio-leds";
221 pinctrl-names = "default";
222 pinctrl-0 =<&leds_gpio>;
225 gpios = <&gpio1 GPIO_C6 GPIO_ACTIVE_HIGH>;
226 label = "battery_led_amber";
227 retain-state-suspended;
231 gpios = <&gpio1 GPIO_D0 GPIO_ACTIVE_HIGH>;
232 label = "battery_led_white";
233 retain-state-suspended;
237 gpios = <&gpio3 GPIO_A5 GPIO_ACTIVE_HIGH>;
238 label = "call_answer_led";
242 gpios = <&gpio3 GPIO_B1 GPIO_ACTIVE_HIGH>;
243 label = "call_decline_led";
247 gpios = <&gpio2 GPIO_D3 GPIO_ACTIVE_HIGH>;
248 label = "rec_mute_led";
252 gpios = <&gpio2 GPIO_D4 GPIO_ACTIVE_HIGH>;
253 label = "play_mute_led";
257 gpios = <&gpio4 GPIO_D2 GPIO_ACTIVE_HIGH>;
263 compatible = "wlan-platdata";
264 rockchip,grf = <&grf>;
265 wifi_chip_type = "ap6354";
267 WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
272 compatible = "bluetooth-platdata";
274 clock-names = "ext_clock";
275 //wifi-bt-power-toggle;
276 uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
277 pinctrl-names = "default", "rts_gpio";
278 pinctrl-0 = <&uart0_rts>;
279 pinctrl-1 = <&uart0_gpios>;
280 //BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
281 BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
282 BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
283 BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
288 compatible = "rockchip,uboot-charge";
289 rockchip,uboot-charge-on = <1>;
290 rockchip,android-charge-on = <1>;
291 rockchip,uboot-exit-charge-level = <3>;
292 rockchip,uboot-low-power-level = <1>;
296 compatible = "rk-vibrator-gpio";
297 vibrator-gpio = <&gpio4 30 GPIO_ACTIVE_LOW>;
302 compatible = "rockchip_headset";
303 headset_gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
304 pinctrl-names = "default";
305 pinctrl-0 = <&hp_det>;
306 io-channels = <&saradc 2>;
309 hall_sensor: hall-mh248 {
310 compatible = "hall-mh248";
311 pinctrl-names = "default";
312 pinctrl-0 = <&mh248_irq_gpio>;
313 irq-gpio = <&gpio0 GPIO_A1 IRQ_TYPE_EDGE_BOTH>;
320 compatible = "rockchip,key";
323 io-channels = <&saradc 1>;
328 rockchip,adc_value = <1>;
333 label = "volume down";
334 rockchip,adc_value = <170>;
338 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
347 rockchip,adc_value = <746>;
353 rockchip,adc_value = <355>;
359 rockchip,adc_value = <560>;
365 rockchip,adc_value = <450>;
370 cpu-supply = <&vdd_cpu_l>;
374 cpu-supply = <&vdd_cpu_l>;
378 cpu-supply = <&vdd_cpu_l>;
382 cpu-supply = <&vdd_cpu_l>;
386 cpu-supply = <&vdd_cpu_b>;
390 cpu-supply = <&vdd_cpu_b>;
399 #address-cells = <1>;
401 edp_out_panel: endpoint@0 {
403 remote-endpoint = <&panel_in_edp>;
415 mali-supply = <&vdd_gpu>;
424 rockchip,i2s-broken-burst-len;
425 rockchip,playback-channels = <8>;
426 rockchip,capture-channels = <8>;
427 rockchip,bclk-fs = <32>;
428 #sound-dai-cells = <0>;
432 #sound-dai-cells = <0>;
437 i2c-scl-rising-time-ns = <180>;
438 i2c-scl-falling-time-ns = <30>;
439 clock-frequency = <400000>;
441 vdd_cpu_b: syr837@40 {
442 compatible = "silergy,syr827";
444 vin-supply = <&vcc_sys>;
445 regulator-compatible = "fan53555-reg";
446 pinctrl-0 = <&vsel1_gpio>;
447 vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
448 regulator-name = "vdd_cpu_b";
449 regulator-min-microvolt = <712500>;
450 regulator-max-microvolt = <1500000>;
451 regulator-ramp-delay = <1000>;
452 fcs,suspend-voltage-selector = <1>;
454 regulator-initial-state = <3>;
455 regulator-state-mem {
456 regulator-off-in-suspend;
461 compatible = "silergy,syr828";
464 vin-supply = <&vcc_sys>;
465 regulator-compatible = "fan53555-reg";
466 pinctrl-0 = <&vsel2_gpio>;
467 vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
468 regulator-name = "vdd_gpu";
469 regulator-min-microvolt = <735000>;
470 regulator-max-microvolt = <1400000>;
471 regulator-ramp-delay = <1000>;
472 fcs,suspend-voltage-selector = <1>;
474 regulator-state-mem {
475 regulator-off-in-suspend;
480 compatible = "rockchip,rk808";
482 interrupt-parent = <&gpio1>;
483 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
484 pinctrl-0 = <&pmic_int_l>;
485 rockchip,system-power-controller;
488 clock-output-names = "xin32k", "rk808-clkout2";
490 vcc1-supply = <&vcc3v3_sys>;
491 vcc2-supply = <&vcc3v3_sys>;
492 vcc3-supply = <&vcc3v3_sys>;
493 vcc4-supply = <&vcc3v3_sys>;
494 vcc6-supply = <&vcc3v3_sys>;
495 vcc7-supply = <&vcc3v3_sys>;
496 vcc8-supply = <&vcc3v3_sys>;
497 vcc9-supply = <&vcc3v3_sys>;
498 vcc10-supply = <&vcc3v3_sys>;
499 vcc11-supply = <&vcc3v3_sys>;
500 vcc12-supply = <&vcc3v3_sys>;
501 vddio-supply = <&vcc1v8_pmu>;
504 vdd_center: DCDC_REG1 {
507 regulator-min-microvolt = <750000>;
508 regulator-max-microvolt = <1350000>;
509 regulator-ramp-delay = <6001>;
510 regulator-name = "vdd_center";
511 regulator-state-mem {
512 regulator-off-in-suspend;
516 vdd_cpu_l: DCDC_REG2 {
519 regulator-min-microvolt = <750000>;
520 regulator-max-microvolt = <1350000>;
521 regulator-ramp-delay = <6001>;
522 regulator-name = "vdd_cpu_l";
523 regulator-state-mem {
524 regulator-off-in-suspend;
531 regulator-name = "vcc_ddr";
532 regulator-state-mem {
533 regulator-on-in-suspend;
540 regulator-min-microvolt = <1800000>;
541 regulator-max-microvolt = <1800000>;
542 regulator-name = "vcc_1v8";
543 regulator-state-mem {
544 regulator-on-in-suspend;
545 regulator-suspend-microvolt = <1800000>;
549 vcc1v8_dvp: LDO_REG1 {
552 regulator-min-microvolt = <1800000>;
553 regulator-max-microvolt = <1800000>;
554 regulator-name = "vcc1v8_dvp";
555 regulator-state-mem {
556 regulator-off-in-suspend;
560 vcc3v0_tp: LDO_REG2 {
563 regulator-min-microvolt = <3000000>;
564 regulator-max-microvolt = <3000000>;
565 regulator-name = "vcc3v0_tp";
566 regulator-state-mem {
567 regulator-off-in-suspend;
571 vcc1v8_pmu: LDO_REG3 {
574 regulator-min-microvolt = <1800000>;
575 regulator-max-microvolt = <1800000>;
576 regulator-name = "vcc1v8_pmu";
577 regulator-state-mem {
578 regulator-on-in-suspend;
579 regulator-suspend-microvolt = <1800000>;
586 regulator-min-microvolt = <1800000>;
587 regulator-max-microvolt = <3300000>;
588 regulator-name = "vcc_sd";
589 regulator-state-mem {
590 regulator-on-in-suspend;
591 regulator-suspend-microvolt = <3300000>;
595 vcca3v0_codec: LDO_REG5 {
598 regulator-min-microvolt = <3000000>;
599 regulator-max-microvolt = <3000000>;
600 regulator-name = "vcca3v0_codec";
601 regulator-state-mem {
602 regulator-on-in-suspend;
603 regulator-suspend-microvolt = <3000000>;
610 regulator-min-microvolt = <1500000>;
611 regulator-max-microvolt = <1500000>;
612 regulator-name = "vcc_1v5";
613 regulator-state-mem {
614 regulator-on-in-suspend;
615 regulator-suspend-microvolt = <1500000>;
619 vcca1v8_codec: LDO_REG7 {
622 regulator-min-microvolt = <1800000>;
623 regulator-max-microvolt = <1800000>;
624 regulator-name = "vcca1v8_codec";
625 regulator-state-mem {
626 regulator-on-in-suspend;
627 regulator-suspend-microvolt = <1800000>;
634 regulator-min-microvolt = <3000000>;
635 regulator-max-microvolt = <3000000>;
636 regulator-name = "vcc_3v0";
637 regulator-state-mem {
638 regulator-on-in-suspend;
639 regulator-suspend-microvolt = <3000000>;
643 vcc3v3_s3: SWITCH_REG1 {
646 regulator-name = "vcc3v3_s3";
647 regulator-state-mem {
648 regulator-off-in-suspend;
652 vcc3v3_s0: SWITCH_REG2 {
655 regulator-name = "vcc3v3_s0";
656 regulator-state-mem {
657 regulator-off-in-suspend;
666 i2c-scl-rising-time-ns = <140>;
667 i2c-scl-falling-time-ns = <30>;
671 #sound-dai-cells = <0>;
672 compatible = "cnxt,cx20723";
674 clocks = <&cru SCLK_I2S_8CH_OUT>;
675 clock-names = "mclk";
676 spk-con-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
684 clock-frequency = <100000>;
685 compatible = "hid-over-i2c";
686 interrupt-parent = <&gpio0>;
687 interrupts = <GPIO_B0 IRQ_TYPE_LEVEL_LOW>;
688 pinctrl-names = "default";
689 pinctrl-0 = <&hidkey_irq_gpio>;
691 hid-descr-addr = <0x0001>;
696 compatible = "rockchip,ec-battery";
700 ec-notify-gpios = <&gpio1 GPIO_C4 GPIO_ACTIVE_HIGH>;
706 i2c-scl-rising-time-ns = <345>;
707 i2c-scl-falling-time-ns = <11>;
708 clock-frequency = <400000>;
710 touchpad: touchpad@2c {
711 compatible = "hid-over-i2c";
712 interrupt-parent = <&gpio1>;
713 interrupts = <GPIO_C2 IRQ_TYPE_LEVEL_LOW>;
714 pinctrl-names = "default";
715 pinctrl-0 = <&touchpad_irq_gpio>;
717 hid-descr-addr = <0x002c>;
723 clock-frequency = <100000>;
724 bq25700: bq25700@09 {//6a
725 compatible = "ti,bq25700";
727 extcon = <&fusb0>, <&fusb1>;
729 interrupt-parent = <&gpio1>;
730 interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
731 pinctrl-names = "default";
732 pinctrl-0 = <&charger_ok>;
733 ti,charge-current = <2500000>;
734 ti,max-input-voltage = <20000000>;
735 ti,max-input-current = <6000000>;
736 ti,max-charge-voltage = <8750000>;
737 ti,input-current = <500000>;
738 ti,input-current-sdp = <500000>;
739 ti,input-current-dcp = <2000000>;
740 ti,input-current-cdp = <2000000>;
741 ti,minimum-sys-voltage = <7400000>;
742 ti,otg-voltage = <5000000>;
743 ti,otg-current = <500000>;
744 pd-charge-only = <1>;
745 typec0-enable-gpios = <&gpio1 GPIO_A3 GPIO_ACTIVE_HIGH>;
746 typec1-enable-gpios = <&gpio1 GPIO_A4 GPIO_ACTIVE_HIGH>;
752 i2c-scl-rising-time-ns = <345>;
753 i2c-scl-falling-time-ns = <11>;
754 clock-frequency = <400000>;
757 compatible = "fairchild,fusb302";
759 pinctrl-names = "default";
760 pinctrl-0 = <&fusb1_int>;
761 vbus-5v-gpios = <&gpio4 GPIO_D6 GPIO_ACTIVE_HIGH>;
762 int-n-gpios = <&gpio1 GPIO_B5 GPIO_ACTIVE_HIGH>;
763 discharge-gpios = <&gpio0 GPIO_B5 GPIO_ACTIVE_HIGH>;
764 charge-dev = <&bq25700>;
771 i2c-scl-rising-time-ns = <345>;
772 i2c-scl-falling-time-ns = <11>;
773 clock-frequency = <400000>;
776 compatible = "fairchild,fusb302";
778 pinctrl-names = "default";
779 pinctrl-0 = <&fusb0_int>;
780 vbus-5v-gpios = <&gpio4 GPIO_D5 GPIO_ACTIVE_HIGH>;
781 int-n-gpios = <&gpio1 GPIO_A2 GPIO_ACTIVE_HIGH>;
782 discharge-gpios = <&gpio0 GPIO_B4 GPIO_ACTIVE_HIGH>;
783 charge-dev = <&bq25700>;
790 bt656-supply = <&vcc_3v0>;
791 audio-supply = <&vcca1v8_codec>;
792 sdmmc-supply = <&vcc_sd>;
793 gpio1830-supply = <&vcc_3v0>;
805 ep-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
807 pinctrl-names = "default";
808 pinctrl-0 = <&pcie_clkreqn_cpm>;
814 pmu1830-supply = <&vcc_1v8>;
831 logo,mode = "center";
843 clock-frequency = <50000000>;
844 clock-freq-min-max = <400000 150000000>;
852 vqmmc-supply = <&vcc_sd>;
853 pinctrl-names = "default";
854 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
859 clock-frequency = <150000000>;
860 clock-freq-min-max = <200000 150000000>;
866 keep-power-in-suspend;
867 mmc-pwrseq = <&sdio_pwrseq>;
870 pinctrl-names = "default";
871 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
881 keep-power-in-suspend;
882 mmc-hs400-enhanced-strobe;
888 #sound-dai-cells = <0>;
906 rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
907 rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
915 u2phy0_otg: otg-port {
919 u2phy0_host: host-port {
920 phy-supply = <&vcc5v0_host>;
929 u2phy1_otg: otg-port {
933 u2phy1_host: host-port {
934 phy-supply = <&vcc5v0_host>;
940 pinctrl-names = "default";
941 pinctrl-0 = <&uart0_xfer &uart0_cts>;
989 wifi_enable_h: wifi-enable-h {
990 rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
995 uart0_gpios: uart0-gpios {
996 rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
1001 pmic_int_l: pmic-int-l {
1003 <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
1005 vsel1_gpio: vsel1-gpio {
1007 <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
1009 vsel2_gpio: vsel2-gpio {
1011 <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
1017 rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_up>;
1022 mh248_irq_gpio: mh248-irq-gpio {
1023 rockchip,pins = <0 GPIO_A2 RK_FUNC_GPIO &pcfg_pull_up>;
1028 hidkey_irq_gpio: hidkey-irq-gpio {
1029 rockchip,pins = <0 GPIO_B0 RK_FUNC_GPIO &pcfg_pull_up>;
1034 touchpad_irq_gpio: touchpad-irq-gpio {
1035 rockchip,pins = <1 GPIO_C2 RK_FUNC_GPIO &pcfg_pull_up>;
1040 charger_ok: charge-ok {
1042 <1 23 RK_FUNC_GPIO &pcfg_pull_up>;
1047 leds_gpio: leds-gpio {
1049 <1 GPIO_C6 RK_FUNC_GPIO &pcfg_pull_up>,
1050 <1 GPIO_D0 RK_FUNC_GPIO &pcfg_pull_up>,
1051 <3 GPIO_A5 RK_FUNC_GPIO &pcfg_pull_up>,
1052 <3 GPIO_B1 RK_FUNC_GPIO &pcfg_pull_up>,
1053 <2 GPIO_D3 RK_FUNC_GPIO &pcfg_pull_up>,
1054 <2 GPIO_D4 RK_FUNC_GPIO &pcfg_pull_up>,
1055 <4 GPIO_D2 RK_FUNC_GPIO &pcfg_pull_up>;
1060 host_vbus_drv: host-vbus-drv {
1062 <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
1067 usb_cam_on_gpio: usb-cam-on-gpio {
1069 <3 GPIO_A1 RK_FUNC_GPIO &pcfg_pull_up>,
1070 <3 GPIO_A2 RK_FUNC_GPIO &pcfg_pull_up>;
1075 fusb0_int: fusb0-int {
1077 <1 GPIO_A2 RK_FUNC_GPIO &pcfg_pull_up>,
1078 <0 GPIO_B4 RK_FUNC_GPIO &pcfg_pull_up>;
1080 fusb1_int: fusb1-int {
1082 <1 GPIO_B5 RK_FUNC_GPIO &pcfg_pull_up>,
1083 <0 GPIO_B5 RK_FUNC_GPIO &pcfg_pull_up>;