2 * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include <dt-bindings/pinctrl/rk.h>
45 #include "rk3399.dtsi"
46 #include "rk3399-android-next.dtsi"
47 #include "rk3399-opp.dtsi"
48 #include <dt-bindings/sensor-dev.h>
49 #include <dt-bindings/pwm/pwm.h>
52 compatible = "rockchip,rk3399-mid", "rockchip,rk3399";
54 edp_panel: edp-panel {
55 compatible = "simple-panel";
56 backlight = <&backlight>;
57 power-supply = <&vcc3v3_s0>;
58 enable-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
59 bus-format = <MEDIA_BUS_FMT_RGB666_1X18>;
61 panel_in_edp: endpoint {
62 remote-endpoint = <&edp_out_panel>;
67 usb_cam_gpio: usb-cam-gpio {
68 compatible = "usb-cam-gpio";
69 pinctrl-names = "default";
70 pinctrl-0 = <&usb_cam_on_gpio>;
71 hd-cam-gpios = <&gpio3 GPIO_A1 GPIO_ACTIVE_HIGH>;
72 ir-cam-gpios = <&gpio3 GPIO_A2 GPIO_ACTIVE_HIGH>;
77 compatible = "regulator-fixed";
78 regulator-name = "vcc_sys";
81 regulator-min-microvolt = <3900000>;
82 regulator-max-microvolt = <3900000>;
85 vcc3v3_sys: vcc3v3-sys {
86 compatible = "regulator-fixed";
87 regulator-name = "vcc3v3_sys";
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
94 vcc5v0_host: vcc5v0-host-regulator {
95 compatible = "regulator-fixed";
97 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
98 pinctrl-names = "default";
99 pinctrl-0 = <&host_vbus_drv>;
100 regulator-name = "vcc5v0_host";
105 compatible = "pwm-regulator";
106 pwms = <&pwm2 0 25000 0>;
107 rockchip,pwm_id= <2>;
108 rockchip,pwm_voltage = <1000000>;
109 regulator-name = "vdd_log";
110 regulator-min-microvolt = <750000>;
111 regulator-max-microvolt = <1350000>;
116 backlight: backlight {
117 compatible = "pwm-backlight";
118 pwms = <&pwm0 0 25000 0>;
119 brightness-levels = <
120 0 1 51 52 52 53 53 54
121 54 55 55 56 56 57 57 58
122 58 59 59 60 61 61 62 63
123 63 64 65 65 66 67 67 68
124 69 69 70 71 71 72 73 73
125 74 75 75 76 77 77 78 79
126 79 80 80 81 81 82 83 83
127 84 85 86 86 87 88 89 89
128 90 91 92 92 93 94 95 95
129 96 97 98 98 99 100 101 101
130 102 103 104 104 105 106 107 107
131 108 109 110 110 111 112 113 113
132 114 115 116 116 117 118 119 119
133 120 121 122 122 123 124 125 125
134 126 127 128 128 129 130 131 131
135 132 133 134 134 135 136 137 137
136 138 139 140 140 141 142 143 143
137 144 145 146 146 147 148 149 149
138 150 151 152 152 153 154 155 155
139 156 157 158 158 159 160 161 161
140 162 163 164 164 165 166 167 167
141 168 169 170 170 171 172 173 173
142 174 175 176 176 177 178 179 179
143 180 181 182 182 183 184 185 185
144 186 187 188 188 189 190 191 191
145 216 217 218 218 219 220 221 221
146 222 223 224 224 225 226 227 227
147 228 229 230 230 231 232 233 233
148 234 235 236 236 237 238 239 239
149 240 241 242 242 243 244 245 245
150 246 247 248 248 249 250 251 251
151 252 253 254 254 255 255 255 255>;
152 default-brightness-level = <200>;
153 enable-gpios = <&gpio3 GPIO_A4 GPIO_ACTIVE_HIGH>;
156 vcc_phy: vcc-phy-regulator {
157 compatible = "regulator-fixed";
158 regulator-name = "vcc_phy";
164 compatible = "simple-audio-card";
165 simple-audio-card,format = "i2s";
166 simple-audio-card,name = "rockchip,cx2072x-codec";
167 simple-audio-card,mclk-fs = <256>;
168 simple-audio-card,widgets =
169 "Microphone", "Microphone Jack",
170 "Line", "Microphone Headset",
171 "Headphone", "Headphone Jack",
172 "Speaker", "Speaker External";
173 simple-audio-card,routing =
174 "PORTC", "Microphone Jack",
175 "PortD Mic Bias", "Microphone Headset",
176 "Headphone Jack", "PORTA",
177 "Speaker External", "PORTG";
178 simple-audio-card,cpu {
181 simple-audio-card,codec {
182 sound-dai = <&cx2072x>;
187 compatible = "simple-audio-card";
188 simple-audio-card,name = "rockchip,spdif";
189 simple-audio-card,cpu {
190 sound-dai = <&spdif>;
192 simple-audio-card,codec {
193 sound-dai = <&spdif_out>;
197 spdif_out: spdif-out {
198 compatible = "linux,spdif-dit";
199 #sound-dai-cells = <0>;
202 sdio_pwrseq: sdio-pwrseq {
203 compatible = "mmc-pwrseq-simple";
205 clock-names = "ext_clock";
206 pinctrl-names = "default";
207 pinctrl-0 = <&wifi_enable_h>;
210 * On the module itself this is one of these (depending
211 * on the actual card populated):
212 * - SDIO_RESET_L_WL_REG_ON
213 * - PDN (power down when low)
215 reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
219 compatible = "gpio-leds";
220 pinctrl-names = "default";
221 pinctrl-0 =<&leds_gpio>;
224 gpios = <&gpio1 GPIO_C6 GPIO_ACTIVE_HIGH>;
225 label = "battery_led_amber";
226 retain-state-suspended;
230 gpios = <&gpio1 GPIO_D0 GPIO_ACTIVE_HIGH>;
231 label = "battery_led_white";
232 retain-state-suspended;
236 gpios = <&gpio3 GPIO_A5 GPIO_ACTIVE_HIGH>;
237 label = "call_answer_led";
241 gpios = <&gpio3 GPIO_B1 GPIO_ACTIVE_HIGH>;
242 label = "call_decline_led";
246 gpios = <&gpio2 GPIO_D3 GPIO_ACTIVE_HIGH>;
247 label = "rec_mute_led";
251 gpios = <&gpio2 GPIO_D4 GPIO_ACTIVE_HIGH>;
252 label = "play_mute_led";
256 gpios = <&gpio4 GPIO_D2 GPIO_ACTIVE_HIGH>;
262 compatible = "wlan-platdata";
263 rockchip,grf = <&grf>;
264 wifi_chip_type = "ap6354";
266 WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
271 compatible = "bluetooth-platdata";
273 clock-names = "ext_clock";
274 //wifi-bt-power-toggle;
275 uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
276 pinctrl-names = "default", "rts_gpio";
277 pinctrl-0 = <&uart0_rts>;
278 pinctrl-1 = <&uart0_gpios>;
279 //BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
280 BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
281 BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
282 BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
287 compatible = "rockchip,uboot-charge";
288 rockchip,uboot-charge-on = <0>;
289 rockchip,android-charge-on = <1>;
293 compatible = "rk-vibrator-gpio";
294 vibrator-gpio = <&gpio4 30 GPIO_ACTIVE_LOW>;
299 compatible = "rockchip_headset";
300 headset_gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
301 pinctrl-names = "default";
302 pinctrl-0 = <&hp_det>;
303 io-channels = <&saradc 2>;
306 hall_sensor: hall-mh248 {
307 compatible = "hall-mh248";
308 pinctrl-names = "default";
309 pinctrl-0 = <&mh248_irq_gpio>;
310 irq-gpio = <&gpio0 GPIO_A1 IRQ_TYPE_EDGE_BOTH>;
317 compatible = "rockchip,key";
320 io-channels = <&saradc 1>;
325 rockchip,adc_value = <1>;
330 label = "volume down";
331 rockchip,adc_value = <170>;
335 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
344 rockchip,adc_value = <746>;
350 rockchip,adc_value = <355>;
356 rockchip,adc_value = <560>;
362 rockchip,adc_value = <450>;
367 cpu-supply = <&vdd_cpu_l>;
371 cpu-supply = <&vdd_cpu_l>;
375 cpu-supply = <&vdd_cpu_l>;
379 cpu-supply = <&vdd_cpu_l>;
383 cpu-supply = <&vdd_cpu_b>;
387 cpu-supply = <&vdd_cpu_b>;
396 #address-cells = <1>;
398 edp_out_panel: endpoint@0 {
400 remote-endpoint = <&panel_in_edp>;
412 mali-supply = <&vdd_gpu>;
421 rockchip,i2s-broken-burst-len;
422 rockchip,playback-channels = <8>;
423 rockchip,capture-channels = <8>;
424 rockchip,bclk-fs = <32>;
425 #sound-dai-cells = <0>;
429 #sound-dai-cells = <0>;
434 i2c-scl-rising-time-ns = <180>;
435 i2c-scl-falling-time-ns = <30>;
436 clock-frequency = <400000>;
438 vdd_cpu_b: syr837@40 {
439 compatible = "silergy,syr827";
441 vin-supply = <&vcc_sys>;
442 regulator-compatible = "fan53555-reg";
443 pinctrl-0 = <&vsel1_gpio>;
444 vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
445 regulator-name = "vdd_cpu_b";
446 regulator-min-microvolt = <712500>;
447 regulator-max-microvolt = <1500000>;
448 regulator-ramp-delay = <1000>;
449 fcs,suspend-voltage-selector = <1>;
451 regulator-initial-state = <3>;
452 regulator-state-mem {
453 regulator-off-in-suspend;
458 compatible = "silergy,syr828";
461 vin-supply = <&vcc_sys>;
462 regulator-compatible = "fan53555-reg";
463 pinctrl-0 = <&vsel2_gpio>;
464 vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
465 regulator-name = "vdd_gpu";
466 regulator-min-microvolt = <735000>;
467 regulator-max-microvolt = <1400000>;
468 regulator-ramp-delay = <1000>;
469 fcs,suspend-voltage-selector = <1>;
471 regulator-state-mem {
472 regulator-off-in-suspend;
477 compatible = "rockchip,rk808";
479 interrupt-parent = <&gpio1>;
480 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
481 pinctrl-0 = <&pmic_int_l>;
482 rockchip,system-power-controller;
485 clock-output-names = "xin32k", "rk808-clkout2";
487 vcc1-supply = <&vcc3v3_sys>;
488 vcc2-supply = <&vcc3v3_sys>;
489 vcc3-supply = <&vcc3v3_sys>;
490 vcc4-supply = <&vcc3v3_sys>;
491 vcc6-supply = <&vcc3v3_sys>;
492 vcc7-supply = <&vcc3v3_sys>;
493 vcc8-supply = <&vcc3v3_sys>;
494 vcc9-supply = <&vcc3v3_sys>;
495 vcc10-supply = <&vcc3v3_sys>;
496 vcc11-supply = <&vcc3v3_sys>;
497 vcc12-supply = <&vcc3v3_sys>;
498 vddio-supply = <&vcc1v8_pmu>;
501 vdd_center: DCDC_REG1 {
504 regulator-min-microvolt = <750000>;
505 regulator-max-microvolt = <1350000>;
506 regulator-ramp-delay = <6001>;
507 regulator-name = "vdd_center";
508 regulator-state-mem {
509 regulator-off-in-suspend;
513 vdd_cpu_l: DCDC_REG2 {
516 regulator-min-microvolt = <750000>;
517 regulator-max-microvolt = <1350000>;
518 regulator-ramp-delay = <6001>;
519 regulator-name = "vdd_cpu_l";
520 regulator-state-mem {
521 regulator-off-in-suspend;
528 regulator-name = "vcc_ddr";
529 regulator-state-mem {
530 regulator-on-in-suspend;
537 regulator-min-microvolt = <1800000>;
538 regulator-max-microvolt = <1800000>;
539 regulator-name = "vcc_1v8";
540 regulator-state-mem {
541 regulator-on-in-suspend;
542 regulator-suspend-microvolt = <1800000>;
546 vcc1v8_dvp: LDO_REG1 {
549 regulator-min-microvolt = <1800000>;
550 regulator-max-microvolt = <1800000>;
551 regulator-name = "vcc1v8_dvp";
552 regulator-state-mem {
553 regulator-off-in-suspend;
557 vcc3v0_tp: LDO_REG2 {
560 regulator-min-microvolt = <3000000>;
561 regulator-max-microvolt = <3000000>;
562 regulator-name = "vcc3v0_tp";
563 regulator-state-mem {
564 regulator-off-in-suspend;
568 vcc1v8_pmu: LDO_REG3 {
571 regulator-min-microvolt = <1800000>;
572 regulator-max-microvolt = <1800000>;
573 regulator-name = "vcc1v8_pmu";
574 regulator-state-mem {
575 regulator-on-in-suspend;
576 regulator-suspend-microvolt = <1800000>;
583 regulator-min-microvolt = <1800000>;
584 regulator-max-microvolt = <3300000>;
585 regulator-name = "vcc_sd";
586 regulator-state-mem {
587 regulator-on-in-suspend;
588 regulator-suspend-microvolt = <3300000>;
592 vcca3v0_codec: LDO_REG5 {
595 regulator-min-microvolt = <3000000>;
596 regulator-max-microvolt = <3000000>;
597 regulator-name = "vcca3v0_codec";
598 regulator-state-mem {
599 regulator-on-in-suspend;
600 regulator-suspend-microvolt = <3000000>;
607 regulator-min-microvolt = <1500000>;
608 regulator-max-microvolt = <1500000>;
609 regulator-name = "vcc_1v5";
610 regulator-state-mem {
611 regulator-on-in-suspend;
612 regulator-suspend-microvolt = <1500000>;
616 vcca1v8_codec: LDO_REG7 {
619 regulator-min-microvolt = <1800000>;
620 regulator-max-microvolt = <1800000>;
621 regulator-name = "vcca1v8_codec";
622 regulator-state-mem {
623 regulator-on-in-suspend;
624 regulator-suspend-microvolt = <1800000>;
631 regulator-min-microvolt = <3000000>;
632 regulator-max-microvolt = <3000000>;
633 regulator-name = "vcc_3v0";
634 regulator-state-mem {
635 regulator-on-in-suspend;
636 regulator-suspend-microvolt = <3000000>;
640 vcc3v3_s3: SWITCH_REG1 {
643 regulator-name = "vcc3v3_s3";
644 regulator-state-mem {
645 regulator-off-in-suspend;
649 vcc3v3_s0: SWITCH_REG2 {
652 regulator-name = "vcc3v3_s0";
653 regulator-state-mem {
654 regulator-off-in-suspend;
663 i2c-scl-rising-time-ns = <140>;
664 i2c-scl-falling-time-ns = <30>;
668 #sound-dai-cells = <0>;
669 compatible = "cnxt,cx20723";
671 clocks = <&cru SCLK_I2S_8CH_OUT>;
672 clock-names = "mclk";
673 spk-con-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
681 clock-frequency = <100000>;
682 compatible = "hid-over-i2c";
683 interrupt-parent = <&gpio0>;
684 interrupts = <GPIO_B0 IRQ_TYPE_LEVEL_LOW>;
685 pinctrl-names = "default";
686 pinctrl-0 = <&hidkey_irq_gpio>;
688 hid-descr-addr = <0x0001>;
693 compatible = "rockchip,ec-battery";
697 ec-notify-gpios = <&gpio1 GPIO_C4 GPIO_ACTIVE_HIGH>;
703 i2c-scl-rising-time-ns = <345>;
704 i2c-scl-falling-time-ns = <11>;
705 clock-frequency = <400000>;
707 touchpad: touchpad@2c {
708 compatible = "hid-over-i2c";
709 interrupt-parent = <&gpio1>;
710 interrupts = <GPIO_C2 IRQ_TYPE_LEVEL_LOW>;
711 pinctrl-names = "default";
712 pinctrl-0 = <&touchpad_irq_gpio>;
714 hid-descr-addr = <0x002c>;
720 clock-frequency = <100000>;
721 bq25700: bq25700@09 {//6a
722 compatible = "ti,bq25700";
724 extcon = <&fusb0>, <&fusb1>;
726 interrupt-parent = <&gpio1>;
727 interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
728 pinctrl-names = "default";
729 pinctrl-0 = <&charger_ok>;
730 ti,charge-current = <2500000>;
731 ti,max-input-voltage = <20000000>;
732 ti,max-input-current = <6000000>;
733 ti,max-charge-voltage = <8750000>;
734 ti,input-current = <500000>;
735 ti,input-current-sdp = <500000>;
736 ti,input-current-dcp = <2000000>;
737 ti,input-current-cdp = <2000000>;
738 ti,minimum-sys-voltage = <7400000>;
739 ti,otg-voltage = <5000000>;
740 ti,otg-current = <500000>;
741 pd-charge-only = <1>;
742 typec0-enable-gpios = <&gpio1 GPIO_A3 GPIO_ACTIVE_HIGH>;
743 typec1-enable-gpios = <&gpio1 GPIO_A4 GPIO_ACTIVE_HIGH>;
744 typec0-discharge-gpios = <&gpio0 GPIO_B4 GPIO_ACTIVE_HIGH>;
745 typec1-discharge-gpios = <&gpio0 GPIO_B5 GPIO_ACTIVE_HIGH>;
751 i2c-scl-rising-time-ns = <345>;
752 i2c-scl-falling-time-ns = <11>;
753 clock-frequency = <400000>;
756 compatible = "fairchild,fusb302";
758 pinctrl-names = "default";
759 pinctrl-0 = <&fusb1_int>;
760 vbus-5v-gpios = <&gpio4 GPIO_D6 GPIO_ACTIVE_LOW>;
761 int-n-gpios = <&gpio1 GPIO_B5 GPIO_ACTIVE_HIGH>;
762 charge-dev = <&bq25700>;
769 i2c-scl-rising-time-ns = <345>;
770 i2c-scl-falling-time-ns = <11>;
771 clock-frequency = <400000>;
774 compatible = "fairchild,fusb302";
776 pinctrl-names = "default";
777 pinctrl-0 = <&fusb0_int>;
778 vbus-5v-gpios = <&gpio4 GPIO_D5 GPIO_ACTIVE_LOW>;
779 int-n-gpios = <&gpio1 GPIO_A2 GPIO_ACTIVE_HIGH>;
780 charge-dev = <&bq25700>;
787 bt656-supply = <&vcc_3v0>;
788 audio-supply = <&vcca1v8_codec>;
789 sdmmc-supply = <&vcc_sd>;
790 gpio1830-supply = <&vcc_3v0>;
802 ep-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
804 pinctrl-names = "default";
805 pinctrl-0 = <&pcie_clkreqn>;
811 pmu1830-supply = <&vcc_1v8>;
828 logo,mode = "center";
840 clock-frequency = <50000000>;
841 clock-freq-min-max = <400000 150000000>;
849 vqmmc-supply = <&vcc_sd>;
850 pinctrl-names = "default";
851 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
856 clock-frequency = <150000000>;
857 clock-freq-min-max = <200000 150000000>;
863 keep-power-in-suspend;
864 mmc-pwrseq = <&sdio_pwrseq>;
867 pinctrl-names = "default";
868 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
878 keep-power-in-suspend;
879 mmc-hs400-enhanced-strobe;
885 #sound-dai-cells = <0>;
903 rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
904 rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
912 u2phy0_otg: otg-port {
916 u2phy0_host: host-port {
917 phy-supply = <&vcc5v0_host>;
926 u2phy1_otg: otg-port {
930 u2phy1_host: host-port {
931 phy-supply = <&vcc5v0_host>;
937 pinctrl-names = "default";
938 pinctrl-0 = <&uart0_xfer &uart0_cts>;
986 wifi_enable_h: wifi-enable-h {
987 rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
992 uart0_gpios: uart0-gpios {
993 rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
998 pmic_int_l: pmic-int-l {
1000 <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
1002 vsel1_gpio: vsel1-gpio {
1004 <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
1006 vsel2_gpio: vsel2-gpio {
1008 <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
1014 rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_up>;
1019 mh248_irq_gpio: mh248-irq-gpio {
1020 rockchip,pins = <0 GPIO_A2 RK_FUNC_GPIO &pcfg_pull_up>;
1025 hidkey_irq_gpio: hidkey-irq-gpio {
1026 rockchip,pins = <0 GPIO_B0 RK_FUNC_GPIO &pcfg_pull_up>;
1031 touchpad_irq_gpio: touchpad-irq-gpio {
1032 rockchip,pins = <1 GPIO_C2 RK_FUNC_GPIO &pcfg_pull_up>;
1037 charger_ok: charge-ok {
1039 <1 23 RK_FUNC_GPIO &pcfg_pull_up>;
1044 leds_gpio: leds-gpio {
1046 <1 GPIO_C6 RK_FUNC_GPIO &pcfg_pull_up>,
1047 <1 GPIO_D0 RK_FUNC_GPIO &pcfg_pull_up>,
1048 <3 GPIO_A5 RK_FUNC_GPIO &pcfg_pull_up>,
1049 <3 GPIO_B1 RK_FUNC_GPIO &pcfg_pull_up>,
1050 <2 GPIO_D3 RK_FUNC_GPIO &pcfg_pull_up>,
1051 <2 GPIO_D4 RK_FUNC_GPIO &pcfg_pull_up>,
1052 <4 GPIO_D2 RK_FUNC_GPIO &pcfg_pull_up>;
1057 host_vbus_drv: host-vbus-drv {
1059 <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
1064 usb_cam_on_gpio: usb-cam-on-gpio {
1066 <3 GPIO_A1 RK_FUNC_GPIO &pcfg_pull_up>,
1067 <3 GPIO_A2 RK_FUNC_GPIO &pcfg_pull_up>;
1072 fusb0_int: fusb0-int {
1074 <1 GPIO_A2 RK_FUNC_GPIO &pcfg_pull_up>;
1076 fusb1_int: fusb1-int {
1078 <1 GPIO_B5 RK_FUNC_GPIO &pcfg_pull_up>;