2 * Support for periodic interrupts (100 per second) and for getting
3 * the current time from the RTC on Power Macintoshes.
5 * We use the decrementer register for our periodic interrupts.
7 * Paul Mackerras August 1996.
8 * Copyright (C) 1996 Paul Mackerras.
9 * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
12 #include <linux/errno.h>
13 #include <linux/sched.h>
14 #include <linux/kernel.h>
15 #include <linux/param.h>
16 #include <linux/string.h>
18 #include <linux/init.h>
19 #include <linux/time.h>
20 #include <linux/adb.h>
21 #include <linux/cuda.h>
22 #include <linux/pmu.h>
23 #include <linux/interrupt.h>
24 #include <linux/hardirq.h>
25 #include <linux/rtc.h>
27 #include <asm/sections.h>
30 #include <asm/pgtable.h>
31 #include <asm/machdep.h>
33 #include <asm/nvram.h>
39 #define DBG(x...) printk(x)
44 /* Apparently the RTC stores seconds since 1 Jan 1904 */
45 #define RTC_OFFSET 2082844800
48 * Calibrate the decrementer frequency with the VIA timer 1.
50 #define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
53 #define RS 0x200 /* skip between registers */
54 #define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
55 #define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
56 #define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
57 #define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
58 #define ACR (11*RS) /* Auxiliary control register */
59 #define IFR (13*RS) /* Interrupt flag register */
62 #define T1MODE 0xc0 /* Timer 1 mode */
63 #define T1MODE_CONT 0x40 /* continuous interrupts */
65 /* Bits in IFR and IER */
66 #define T1_INT 0x40 /* Timer 1 interrupt */
68 long __init pmac_time_init(void)
74 delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
75 delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
76 delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
77 if (delta & 0x00800000UL)
78 delta |= 0xFF000000UL;
79 dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
80 printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
86 #if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
87 static void to_rtc_time(unsigned long now, struct rtc_time *tm)
95 #if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) || \
96 defined(CONFIG_PMAC_SMU)
97 static unsigned long from_rtc_time(struct rtc_time *tm)
99 return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
100 tm->tm_hour, tm->tm_min, tm->tm_sec);
104 #ifdef CONFIG_ADB_CUDA
105 static unsigned long cuda_get_time(void)
107 struct adb_request req;
110 if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
112 while (!req.complete)
114 if (req.reply_len != 7)
115 printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
117 now = (req.reply[3] << 24) + (req.reply[4] << 16)
118 + (req.reply[5] << 8) + req.reply[6];
119 return ((unsigned long)now) - RTC_OFFSET;
122 #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm))
124 static int cuda_set_rtc_time(struct rtc_time *tm)
126 unsigned int nowtime;
127 struct adb_request req;
129 nowtime = from_rtc_time(tm) + RTC_OFFSET;
130 if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
131 nowtime >> 24, nowtime >> 16, nowtime >> 8,
134 while (!req.complete)
136 if ((req.reply_len != 3) && (req.reply_len != 7))
137 printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
143 #define cuda_get_time() 0
144 #define cuda_get_rtc_time(tm)
145 #define cuda_set_rtc_time(tm) 0
148 #ifdef CONFIG_ADB_PMU
149 static unsigned long pmu_get_time(void)
151 struct adb_request req;
154 if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
156 pmu_wait_complete(&req);
157 if (req.reply_len != 4)
158 printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
160 now = (req.reply[0] << 24) + (req.reply[1] << 16)
161 + (req.reply[2] << 8) + req.reply[3];
162 return ((unsigned long)now) - RTC_OFFSET;
165 #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm))
167 static int pmu_set_rtc_time(struct rtc_time *tm)
169 unsigned int nowtime;
170 struct adb_request req;
172 nowtime = from_rtc_time(tm) + RTC_OFFSET;
173 if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
174 nowtime >> 16, nowtime >> 8, nowtime) < 0)
176 pmu_wait_complete(&req);
177 if (req.reply_len != 0)
178 printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
184 #define pmu_get_time() 0
185 #define pmu_get_rtc_time(tm)
186 #define pmu_set_rtc_time(tm) 0
189 #ifdef CONFIG_PMAC_SMU
190 static unsigned long smu_get_time(void)
194 if (smu_get_rtc_time(&tm, 1))
196 return from_rtc_time(&tm);
200 #define smu_get_time() 0
201 #define smu_get_rtc_time(tm, spin)
202 #define smu_set_rtc_time(tm, spin) 0
205 /* Can't be __init, it's called when suspending and resuming */
206 unsigned long pmac_get_boot_time(void)
208 /* Get the time from the RTC, used only at boot time */
209 switch (sys_ctrler) {
210 case SYS_CTRLER_CUDA:
211 return cuda_get_time();
213 return pmu_get_time();
215 return smu_get_time();
221 void pmac_get_rtc_time(struct rtc_time *tm)
223 /* Get the time from the RTC, used only at boot time */
224 switch (sys_ctrler) {
225 case SYS_CTRLER_CUDA:
226 cuda_get_rtc_time(tm);
229 pmu_get_rtc_time(tm);
232 smu_get_rtc_time(tm, 1);
239 int pmac_set_rtc_time(struct rtc_time *tm)
241 switch (sys_ctrler) {
242 case SYS_CTRLER_CUDA:
243 return cuda_set_rtc_time(tm);
245 return pmu_set_rtc_time(tm);
247 return smu_set_rtc_time(tm, 1);
255 * Calibrate the decrementer register using VIA timer 1.
256 * This is used both on powermacs and CHRP machines.
258 int __init via_calibrate_decr(void)
260 struct device_node *vias;
261 volatile unsigned char __iomem *via;
262 int count = VIA_TIMER_FREQ_6 / 100;
263 unsigned int dstart, dend;
264 struct resource rsrc;
266 vias = of_find_node_by_name(NULL, "via-cuda");
268 vias = of_find_node_by_name(NULL, "via-pmu");
270 vias = of_find_node_by_name(NULL, "via");
271 if (vias == NULL || of_address_to_resource(vias, 0, &rsrc)) {
276 via = ioremap(rsrc.start, resource_size(&rsrc));
278 printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
282 /* set timer 1 for continuous interrupts */
283 out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
284 /* set the counter to a small value */
285 out_8(&via[T1CH], 2);
286 /* set the latch to `count' */
287 out_8(&via[T1LL], count);
288 out_8(&via[T1LH], count >> 8);
289 /* wait until it hits 0 */
290 while ((in_8(&via[IFR]) & T1_INT) == 0)
293 /* clear the interrupt & wait until it hits 0 again */
295 while ((in_8(&via[IFR]) & T1_INT) == 0)
299 ppc_tb_freq = (dstart - dend) * 100 / 6;
308 * Query the OF and get the decr frequency.
310 void __init pmac_calibrate_decr(void)
312 generic_calibrate_decr();
315 /* We assume MacRISC2 machines have correct device-tree
316 * calibration. That's better since the VIA itself seems
317 * to be slightly off. --BenH
319 if (!of_machine_is_compatible("MacRISC2") &&
320 !of_machine_is_compatible("MacRISC3") &&
321 !of_machine_is_compatible("MacRISC4"))
322 if (via_calibrate_decr())
325 /* Special case: QuickSilver G4s seem to have a badly calibrated
326 * timebase-frequency in OF, VIA is much better on these. We should
327 * probably implement calibration based on the KL timer on these
328 * machines anyway... -BenH
330 if (of_machine_is_compatible("PowerMac3,5"))
331 if (via_calibrate_decr())