3 select ARCH_MIGHT_HAVE_PC_PARPORT
6 select HAVE_IDE if HAS_IOPORT_MAP
8 select HAVE_MEMBLOCK_NODE_MAP
9 select ARCH_DISCARD_MEMBLOCK
11 select HAVE_GENERIC_DMA_COHERENT
12 select HAVE_ARCH_TRACEHOOK
13 select HAVE_DMA_API_DEBUG
15 select HAVE_PERF_EVENTS
16 select HAVE_DEBUG_BUGVERBOSE
17 select ARCH_HAVE_CUSTOM_GPIO_H
18 select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
19 select PERF_USE_VMALLOC
20 select HAVE_DEBUG_KMEMLEAK
21 select HAVE_KERNEL_GZIP
22 select HAVE_KERNEL_BZIP2
23 select HAVE_KERNEL_LZMA
25 select HAVE_KERNEL_LZO
27 select ARCH_WANT_IPC_PARSE_VERSION
28 select HAVE_SYSCALL_TRACEPOINTS
29 select HAVE_REGS_AND_STACK_ACCESS_API
30 select MAY_HAVE_SPARSE_IRQ
31 select IRQ_FORCED_THREADING
33 select GENERIC_ATOMIC64
34 select GENERIC_IRQ_SHOW
35 select GENERIC_SMP_IDLE_THREAD
36 select GENERIC_IDLE_POLL_SETUP
37 select GENERIC_CLOCKEVENTS
38 select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
39 select GENERIC_STRNCPY_FROM_USER
40 select GENERIC_STRNLEN_USER
41 select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
42 select MODULES_USE_ELF_RELA
45 select HAVE_ARCH_AUDITSYSCALL
47 The SuperH is a RISC processor targeted for use in embedded systems
48 and consumer electronics; it was also used in the Sega Dreamcast
49 gaming console. The SuperH port has a home page at
50 <http://www.linux-sh.org/>.
55 select HAVE_KRETPROBES
56 select HAVE_IOREMAP_PROT if MMU && !X2TLB
57 select HAVE_FUNCTION_TRACER
58 select HAVE_FTRACE_MCOUNT_RECORD
59 select HAVE_DYNAMIC_FTRACE
60 select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
61 select ARCH_WANT_IPC_PARSE_VERSION
62 select HAVE_FUNCTION_GRAPH_TRACER
64 select HAVE_HW_BREAKPOINT
65 select HAVE_MIXED_BREAKPOINTS_REGS
67 select ARCH_HIBERNATION_POSSIBLE if MMU
69 select HAVE_CC_STACKPROTECTOR
72 def_bool ARCH = "sh64"
77 default "arch/sh/configs/shx3_defconfig" if SUPERH32
78 default "arch/sh/configs/cayman_defconfig" if SUPERH64
80 config RWSEM_GENERIC_SPINLOCK
83 config RWSEM_XCHGADD_ALGORITHM
88 depends on BUG && SUPERH32
94 config GENERIC_HWEIGHT
97 config GENERIC_CALIBRATE_DELAY
100 config GENERIC_LOCKBREAK
102 depends on SMP && PREEMPT
104 config ARCH_SUSPEND_POSSIBLE
107 config ARCH_HIBERNATION_POSSIBLE
110 config SYS_SUPPORTS_APM_EMULATION
112 select ARCH_SUSPEND_POSSIBLE
114 config SYS_SUPPORTS_HUGETLBFS
117 config SYS_SUPPORTS_SMP
120 config SYS_SUPPORTS_NUMA
123 config SYS_SUPPORTS_PCI
126 config STACKTRACE_SUPPORT
129 config LOCKDEP_SUPPORT
132 config HAVE_LATENCYTOP_SUPPORT
135 config ARCH_HAS_ILOG2_U32
138 config ARCH_HAS_ILOG2_U64
143 depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
144 !SH_HP6XX && !SH_SOLUTION_ENGINE
155 config DMA_NONCOHERENT
156 def_bool !DMA_COHERENT
158 config NEED_DMA_MAP_STATE
159 def_bool DMA_NONCOHERENT
161 config NEED_SG_DMA_LENGTH
164 source "init/Kconfig"
166 source "kernel/Kconfig.freezer"
179 select UNCACHED_MAPPING
183 select CPU_HAS_INTEVT
185 select SYS_SUPPORTS_SH_TMU
189 select CPU_HAS_INTEVT
191 select CPU_HAS_FPU if !CPU_SH4AL_DSP
192 select SYS_SUPPORTS_SH_TMU
193 select SYS_SUPPORTS_HUGETLBFS if MMU
207 select SYS_SUPPORTS_SH_TMU
208 select SYS_SUPPORTS_HUGETLBFS if MMU
216 select SYS_SUPPORTS_SMP
217 select SYS_SUPPORTS_NUMA
221 select ARCH_SUSPEND_POSSIBLE
226 depends on CPU_SH4 || CPU_SH4A
233 prompt "Processor sub-type selection"
239 # SH-2 Processor Support
241 config CPU_SUBTYPE_SH7619
242 bool "Support SH7619 processor"
244 select SYS_SUPPORTS_SH_CMT
246 # SH-2A Processor Support
248 config CPU_SUBTYPE_SH7201
249 bool "Support SH7201 processor"
252 select SYS_SUPPORTS_SH_MTU2
254 config CPU_SUBTYPE_SH7203
255 bool "Support SH7203 processor"
258 select SYS_SUPPORTS_SH_CMT
259 select SYS_SUPPORTS_SH_MTU2
260 select ARCH_WANT_OPTIONAL_GPIOLIB
263 config CPU_SUBTYPE_SH7206
264 bool "Support SH7206 processor"
266 select SYS_SUPPORTS_SH_CMT
267 select SYS_SUPPORTS_SH_MTU2
269 config CPU_SUBTYPE_SH7263
270 bool "Support SH7263 processor"
273 select SYS_SUPPORTS_SH_CMT
274 select SYS_SUPPORTS_SH_MTU2
276 config CPU_SUBTYPE_SH7264
277 bool "Support SH7264 processor"
280 select SYS_SUPPORTS_SH_CMT
281 select SYS_SUPPORTS_SH_MTU2
284 config CPU_SUBTYPE_SH7269
285 bool "Support SH7269 processor"
288 select SYS_SUPPORTS_SH_CMT
289 select SYS_SUPPORTS_SH_MTU2
292 config CPU_SUBTYPE_MXG
293 bool "Support MX-G processor"
295 select SYS_SUPPORTS_SH_MTU2
297 Select MX-G if running on an R8A03022BG part.
299 # SH-3 Processor Support
301 config CPU_SUBTYPE_SH7705
302 bool "Support SH7705 processor"
305 config CPU_SUBTYPE_SH7706
306 bool "Support SH7706 processor"
309 Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
311 config CPU_SUBTYPE_SH7707
312 bool "Support SH7707 processor"
315 Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
317 config CPU_SUBTYPE_SH7708
318 bool "Support SH7708 processor"
321 Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
322 if you have a 100 Mhz SH-3 HD6417708R CPU.
324 config CPU_SUBTYPE_SH7709
325 bool "Support SH7709 processor"
328 Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
330 config CPU_SUBTYPE_SH7710
331 bool "Support SH7710 processor"
335 Select SH7710 if you have a SH3-DSP SH7710 CPU.
337 config CPU_SUBTYPE_SH7712
338 bool "Support SH7712 processor"
342 Select SH7712 if you have a SH3-DSP SH7712 CPU.
344 config CPU_SUBTYPE_SH7720
345 bool "Support SH7720 processor"
348 select SYS_SUPPORTS_SH_CMT
349 select ARCH_WANT_OPTIONAL_GPIOLIB
350 select USB_OHCI_SH if USB_OHCI_HCD
353 Select SH7720 if you have a SH3-DSP SH7720 CPU.
355 config CPU_SUBTYPE_SH7721
356 bool "Support SH7721 processor"
359 select SYS_SUPPORTS_SH_CMT
360 select USB_OHCI_SH if USB_OHCI_HCD
362 Select SH7721 if you have a SH3-DSP SH7721 CPU.
364 # SH-4 Processor Support
366 config CPU_SUBTYPE_SH7750
367 bool "Support SH7750 processor"
370 Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
372 config CPU_SUBTYPE_SH7091
373 bool "Support SH7091 processor"
376 Select SH7091 if you have an SH-4 based Sega device (such as
377 the Dreamcast, Naomi, and Naomi 2).
379 config CPU_SUBTYPE_SH7750R
380 bool "Support SH7750R processor"
383 config CPU_SUBTYPE_SH7750S
384 bool "Support SH7750S processor"
387 config CPU_SUBTYPE_SH7751
388 bool "Support SH7751 processor"
391 Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
392 or if you have a HD6417751R CPU.
394 config CPU_SUBTYPE_SH7751R
395 bool "Support SH7751R processor"
398 config CPU_SUBTYPE_SH7760
399 bool "Support SH7760 processor"
402 config CPU_SUBTYPE_SH4_202
403 bool "Support SH4-202 processor"
406 # SH-4A Processor Support
408 config CPU_SUBTYPE_SH7723
409 bool "Support SH7723 processor"
413 select ARCH_SPARSEMEM_ENABLE
414 select SYS_SUPPORTS_SH_CMT
415 select ARCH_WANT_OPTIONAL_GPIOLIB
418 Select SH7723 if you have an SH-MobileR2 CPU.
420 config CPU_SUBTYPE_SH7724
421 bool "Support SH7724 processor"
425 select ARCH_SPARSEMEM_ENABLE
426 select SYS_SUPPORTS_SH_CMT
427 select ARCH_WANT_OPTIONAL_GPIOLIB
430 Select SH7724 if you have an SH-MobileR2R CPU.
432 config CPU_SUBTYPE_SH7734
433 bool "Support SH7734 processor"
436 select ARCH_WANT_OPTIONAL_GPIOLIB
439 Select SH7734 if you have a SH4A SH7734 CPU.
441 config CPU_SUBTYPE_SH7757
442 bool "Support SH7757 processor"
445 select ARCH_WANT_OPTIONAL_GPIOLIB
448 Select SH7757 if you have a SH4A SH7757 CPU.
450 config CPU_SUBTYPE_SH7763
451 bool "Support SH7763 processor"
453 select USB_OHCI_SH if USB_OHCI_HCD
455 Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
457 config CPU_SUBTYPE_SH7770
458 bool "Support SH7770 processor"
461 config CPU_SUBTYPE_SH7780
462 bool "Support SH7780 processor"
465 config CPU_SUBTYPE_SH7785
466 bool "Support SH7785 processor"
469 select ARCH_SPARSEMEM_ENABLE
470 select SYS_SUPPORTS_NUMA
471 select ARCH_WANT_OPTIONAL_GPIOLIB
474 config CPU_SUBTYPE_SH7786
475 bool "Support SH7786 processor"
478 select CPU_HAS_PTEAEX
479 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
480 select ARCH_WANT_OPTIONAL_GPIOLIB
481 select USB_OHCI_SH if USB_OHCI_HCD
482 select USB_EHCI_SH if USB_EHCI_HCD
485 config CPU_SUBTYPE_SHX3
486 bool "Support SH-X3 processor"
489 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
490 select ARCH_REQUIRE_GPIOLIB
493 # SH4AL-DSP Processor Support
495 config CPU_SUBTYPE_SH7343
496 bool "Support SH7343 processor"
499 select SYS_SUPPORTS_SH_CMT
501 config CPU_SUBTYPE_SH7722
502 bool "Support SH7722 processor"
506 select ARCH_SPARSEMEM_ENABLE
507 select SYS_SUPPORTS_NUMA
508 select SYS_SUPPORTS_SH_CMT
509 select ARCH_WANT_OPTIONAL_GPIOLIB
512 config CPU_SUBTYPE_SH7366
513 bool "Support SH7366 processor"
517 select ARCH_SPARSEMEM_ENABLE
518 select SYS_SUPPORTS_NUMA
519 select SYS_SUPPORTS_SH_CMT
528 prompt "Processor sub-type selection"
530 # SH-5 Processor Support
532 config CPU_SUBTYPE_SH5_101
533 bool "Support SH5-101 processor"
536 config CPU_SUBTYPE_SH5_103
537 bool "Support SH5-103 processor"
544 source "arch/sh/mm/Kconfig"
546 source "arch/sh/Kconfig.cpu"
548 source "arch/sh/boards/Kconfig"
550 menu "Timer and clock configuration"
553 int "Peripheral clock frequency (in Hz)"
554 depends on SH_CLK_CPG_LEGACY
555 default "31250000" if CPU_SUBTYPE_SH7619
556 default "33333333" if CPU_SUBTYPE_SH7770 || \
557 CPU_SUBTYPE_SH7760 || \
558 CPU_SUBTYPE_SH7705 || \
559 CPU_SUBTYPE_SH7203 || \
560 CPU_SUBTYPE_SH7206 || \
561 CPU_SUBTYPE_SH7263 || \
563 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
564 default "66000000" if CPU_SUBTYPE_SH4_202
567 This option is used to specify the peripheral clock frequency.
568 This is necessary for determining the reference clock value on
569 platforms lacking an RTC.
574 config SH_CLK_CPG_LEGACY
575 depends on SH_CLK_CPG
576 def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
577 !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
578 !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
583 menu "CPU Frequency scaling"
584 source "drivers/cpufreq/Kconfig"
587 source "arch/sh/drivers/Kconfig"
591 menu "Kernel features"
593 source kernel/Kconfig.hz
596 bool "kexec system call (EXPERIMENTAL)"
597 depends on SUPERH32 && MMU
601 kexec is a system call that implements the ability to shutdown your
602 current kernel, and to start another kernel. It is like a reboot
603 but it is independent of the system firmware. And like a reboot
604 you can start any kernel with it, not just Linux.
606 The name comes from the similarity to the exec system call.
608 It is an ongoing process to be certain the hardware in a machine
609 is properly shutdown, so do not be surprised if this code does not
610 initially work for you. As of this writing the exact hardware
611 interface is strongly in flux, so no good recommendation can be
615 bool "kernel crash dumps (EXPERIMENTAL)"
616 depends on SUPERH32 && BROKEN_ON_SMP
618 Generate crash dump after being started by kexec.
619 This should be normally only set in special crash dump kernels
620 which are loaded in the main kernel with kexec-tools into
621 a specially reserved region and then later executed after
622 a crash by kdump/kexec. The crash dump kernel must be compiled
623 to a memory address not used by the main kernel using
626 For more details see Documentation/kdump/kdump.txt
629 bool "kexec jump (EXPERIMENTAL)"
630 depends on SUPERH32 && KEXEC && HIBERNATION
632 Jump between original kernel and kexeced kernel and invoke
635 config PHYSICAL_START
636 hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
639 This gives the physical address where the kernel is loaded
640 and is ordinarily the same as MEMORY_START.
642 Different values are primarily used in the case of kexec on panic
643 where the fail safe kernel needs to run at a different address
644 than the panic-ed kernel.
647 bool "Enable seccomp to safely compute untrusted bytecode"
650 This kernel feature is useful for number crunching applications
651 that may need to compute untrusted bytecode during their
652 execution. By using pipes or other transports made available to
653 the process as file descriptors supporting the read/write
654 syscalls, it's possible to isolate those applications in
655 their own address space using seccomp. Once seccomp is
656 enabled via prctl, it cannot be disabled and the task is only
657 allowed to execute a few safe syscalls defined by each seccomp
663 bool "Symmetric multi-processing support"
664 depends on SYS_SUPPORTS_SMP
666 This enables support for systems with more than one CPU. If you have
667 a system with only one CPU, say N. If you have a system with more
670 If you say N here, the kernel will run on uni- and multiprocessor
671 machines, but will use only one CPU of a multiprocessor machine. If
672 you say Y here, the kernel will run on many, but not all,
673 uniprocessor machines. On a uniprocessor machine, the kernel
674 will run faster if you say N here.
676 People using multiprocessor machines who say Y here should also say
677 Y to "Enhanced Real Time Clock Support", below.
679 See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
680 available at <http://www.tldp.org/docs.html#howto>.
682 If you don't know what to do here, say N.
685 int "Maximum number of CPUs (2-32)"
688 default "4" if CPU_SUBTYPE_SHX3
691 This allows you to specify the maximum number of CPUs which this
692 kernel will support. The maximum supported value is 32 and the
693 minimum value which makes sense is 2.
695 This is purely to save memory - each supported CPU adds
696 approximately eight kilobytes to the kernel image.
699 bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
702 Say Y here to experiment with turning CPUs off and on. CPUs
703 can be controlled through /sys/devices/system/cpu.
705 source "kernel/Kconfig.preempt"
709 depends on !SMP && SUPERH32
711 This enables support for gUSA (general UserSpace Atomicity).
712 This is the default implementation for both UP and non-ll/sc
713 CPUs, and is used by the libc, amongst others.
715 For additional information, design information can be found
716 in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
718 This should only be disabled for special cases where alternate
719 atomicity implementations exist.
722 bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
723 depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
725 Enabling this option will allow the kernel to implement some
726 atomic operations using a software implementation of load-locked/
727 store-conditional (LLSC). On machines which do not have hardware
728 LLSC, this should be more efficient than the other alternative of
729 disabling interrupts around the atomic sequence.
731 config HW_PERF_EVENTS
732 bool "Enable hardware performance counter support for perf events"
733 depends on PERF_EVENTS && CPU_HAS_PMU
736 Enable hardware performance counter support for perf events. If
737 disabled, perf events will use software events only.
739 source "drivers/sh/Kconfig"
745 config ZERO_PAGE_OFFSET
747 default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
748 SH_7751_SOLUTION_ENGINE
749 default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
750 default "0x00002000" if PAGE_SIZE_8KB
753 This sets the default offset of zero page.
755 config BOOT_LINK_OFFSET
757 default "0x00210000" if SH_SHMIN
758 default "0x00400000" if SH_CAYMAN
759 default "0x00810000" if SH_7780_SOLUTION_ENGINE
760 default "0x009e0000" if SH_TITAN
761 default "0x01800000" if SH_SDK7780
762 default "0x02000000" if SH_EDOSK7760
765 This option allows you to set the link address offset of the zImage.
766 This can be useful if you are on a board which has a small amount of
771 default "0x00001000" if PAGE_SIZE_4KB
772 default "0x00002000" if PAGE_SIZE_8KB
773 default "0x00004000" if PAGE_SIZE_16KB
774 default "0x00010000" if PAGE_SIZE_64KB
777 config ROMIMAGE_MMCIF
778 bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
779 depends on CPU_SUBTYPE_SH7724
781 Say Y here to include experimental MMCIF loading code in
782 romImage. With this enabled it is possible to write the romImage
783 kernel image to an MMC card and boot the kernel straight from
784 the reset vector. At reset the processor Mask ROM will load the
785 first part of the romImage which in turn loads the rest the kernel
786 image to RAM using the MMCIF hardware block.
789 prompt "Kernel command line"
791 default CMDLINE_OVERWRITE
793 Setting this option allows the kernel command line arguments
796 config CMDLINE_OVERWRITE
797 bool "Overwrite bootloader kernel arguments"
799 Given string will overwrite any arguments passed in by
802 config CMDLINE_EXTEND
803 bool "Extend bootloader kernel arguments"
805 Given string will be concatenated with arguments passed in
811 string "Kernel command line arguments string"
812 depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
813 default "console=ttySC1,115200"
820 tristate "SuperHyway Bus support"
821 depends on CPU_SUBTYPE_SH4_202
824 bool "Maple Bus support"
825 depends on SH_DREAMCAST
827 The Maple Bus is SEGA's serial communication bus for peripherals
828 on the Dreamcast. Without this bus support you won't be able to
829 get your Dreamcast keyboard etc to work, so most users
830 probably want to say 'Y' here, unless you are only using the
831 Dreamcast with a serial line terminal or a remote network
836 depends on SYS_SUPPORTS_PCI
838 select GENERIC_PCI_IOMAP
839 select NO_GENERIC_PCI_IOPORT_MAP
841 Find out whether you have a PCI motherboard. PCI is the name of a
842 bus system, i.e. the way the CPU talks to the other stuff inside
843 your box. If you have PCI, say Y, otherwise N.
848 source "drivers/pci/pcie/Kconfig"
850 source "drivers/pci/Kconfig"
852 source "drivers/pcmcia/Kconfig"
854 source "drivers/pci/hotplug/Kconfig"
858 menu "Executable file formats"
860 source "fs/Kconfig.binfmt"
864 menu "Power management options (EXPERIMENTAL)"
866 source "kernel/power/Kconfig"
868 source "drivers/cpuidle/Kconfig"
874 source "drivers/Kconfig"
878 source "arch/sh/Kconfig.debug"
880 source "security/Kconfig"
882 source "crypto/Kconfig"