3 bool "64-bit kernel" if ARCH = "x86"
6 Say yes to build a 64-bit kernel - formerly known as x86_64
7 Say no to build a 32-bit kernel - formerly known as i386
20 select ACPI_LEGACY_TABLES_LOOKUP if ACPI
21 select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
23 select ARCH_CLOCKSOURCE_DATA
24 select ARCH_DISCARD_MEMBLOCK
25 select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
26 select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
27 select ARCH_HAS_ELF_RANDOMIZE
28 select ARCH_HAS_FAST_MULTIPLIER
29 select ARCH_HAS_GCOV_PROFILE_ALL
30 select ARCH_HAS_PMEM_API if X86_64
31 select ARCH_HAS_MMIO_FLUSH
32 select ARCH_HAS_SG_CHAIN
33 select ARCH_HAVE_NMI_SAFE_CMPXCHG
34 select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
35 select ARCH_MIGHT_HAVE_PC_PARPORT
36 select ARCH_MIGHT_HAVE_PC_SERIO
37 select ARCH_SUPPORTS_ATOMIC_RMW
38 select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
39 select ARCH_SUPPORTS_INT128 if X86_64
40 select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
41 select ARCH_USE_BUILTIN_BSWAP
42 select ARCH_USE_CMPXCHG_LOCKREF if X86_64
43 select ARCH_USE_QUEUED_RWLOCKS
44 select ARCH_USE_QUEUED_SPINLOCKS
45 select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH if SMP
46 select ARCH_WANTS_DYNAMIC_TASK_STRUCT
47 select ARCH_WANT_FRAME_POINTERS
48 select ARCH_WANT_IPC_PARSE_VERSION if X86_32
49 select ARCH_WANT_OPTIONAL_GPIOLIB
50 select BUILDTIME_EXTABLE_SORT
52 select CLKSRC_I8253 if X86_32
53 select CLOCKSOURCE_VALIDATE_LAST_CYCLE
54 select CLOCKSOURCE_WATCHDOG
55 select CLONE_BACKWARDS if X86_32
56 select COMPAT_OLD_SIGACTION if IA32_EMULATION
57 select DCACHE_WORD_ACCESS
58 select EDAC_ATOMIC_SCRUB
60 select GENERIC_CLOCKEVENTS
61 select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
62 select GENERIC_CLOCKEVENTS_MIN_ADJUST
63 select GENERIC_CMOS_UPDATE
64 select GENERIC_CPU_AUTOPROBE
65 select GENERIC_EARLY_IOREMAP
66 select GENERIC_FIND_FIRST_BIT
68 select GENERIC_IRQ_PROBE
69 select GENERIC_IRQ_SHOW
70 select GENERIC_PENDING_IRQ if SMP
71 select GENERIC_SMP_IDLE_THREAD
72 select GENERIC_STRNCPY_FROM_USER
73 select GENERIC_STRNLEN_USER
74 select GENERIC_TIME_VSYSCALL
75 select HAVE_ACPI_APEI if ACPI
76 select HAVE_ACPI_APEI_NMI if ACPI
77 select HAVE_ALIGNED_STRUCT_PAGE if SLUB
78 select HAVE_AOUT if X86_32
79 select HAVE_ARCH_AUDITSYSCALL
80 select HAVE_ARCH_HUGE_VMAP if X86_64 || X86_PAE
81 select HAVE_ARCH_JUMP_LABEL
82 select HAVE_ARCH_KASAN if X86_64 && SPARSEMEM_VMEMMAP
84 select HAVE_ARCH_KMEMCHECK
85 select HAVE_ARCH_SECCOMP_FILTER
86 select HAVE_ARCH_SOFT_DIRTY if X86_64
87 select HAVE_ARCH_TRACEHOOK
88 select HAVE_ARCH_TRANSPARENT_HUGEPAGE
89 select HAVE_BPF_JIT if X86_64
90 select HAVE_CC_STACKPROTECTOR
91 select HAVE_CMPXCHG_DOUBLE
92 select HAVE_CMPXCHG_LOCAL
93 select HAVE_CONTEXT_TRACKING if X86_64
94 select HAVE_COPY_THREAD_TLS
95 select HAVE_C_RECORDMCOUNT
96 select HAVE_DEBUG_KMEMLEAK
97 select HAVE_DEBUG_STACKOVERFLOW
98 select HAVE_DMA_API_DEBUG
100 select HAVE_DMA_CONTIGUOUS
101 select HAVE_DYNAMIC_FTRACE
102 select HAVE_DYNAMIC_FTRACE_WITH_REGS
103 select HAVE_EFFICIENT_UNALIGNED_ACCESS
104 select HAVE_FENTRY if X86_64
105 select HAVE_FTRACE_MCOUNT_RECORD
106 select HAVE_FUNCTION_GRAPH_FP_TEST
107 select HAVE_FUNCTION_GRAPH_TRACER
108 select HAVE_FUNCTION_TRACER
109 select HAVE_GENERIC_DMA_COHERENT if X86_32
110 select HAVE_HW_BREAKPOINT
112 select HAVE_IOREMAP_PROT
113 select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
114 select HAVE_IRQ_TIME_ACCOUNTING
115 select HAVE_KERNEL_BZIP2
116 select HAVE_KERNEL_GZIP
117 select HAVE_KERNEL_LZ4
118 select HAVE_KERNEL_LZMA
119 select HAVE_KERNEL_LZO
120 select HAVE_KERNEL_XZ
122 select HAVE_KPROBES_ON_FTRACE
123 select HAVE_KRETPROBES
125 select HAVE_LIVEPATCH if X86_64
127 select HAVE_MEMBLOCK_NODE_MAP
128 select HAVE_MIXED_BREAKPOINTS_REGS
130 select HAVE_OPTPROBES
131 select HAVE_PCSPKR_PLATFORM
132 select HAVE_PERF_EVENTS
133 select HAVE_PERF_EVENTS_NMI
134 select HAVE_PERF_REGS
135 select HAVE_PERF_USER_STACK_DUMP
136 select HAVE_REGS_AND_STACK_ACCESS_API
137 select HAVE_SYSCALL_TRACEPOINTS
138 select HAVE_UID16 if X86_32 || IA32_EMULATION
139 select HAVE_UNSTABLE_SCHED_CLOCK
140 select HAVE_USER_RETURN_NOTIFIER
141 select IRQ_FORCED_THREADING
142 select MODULES_USE_ELF_RELA if X86_64
143 select MODULES_USE_ELF_REL if X86_32
144 select OLD_SIGACTION if X86_32
145 select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION
150 select SYSCTL_EXCEPTION_TRACE
151 select USER_STACKTRACE_SUPPORT
153 select X86_DEV_DMA_OPS if X86_64
154 select X86_FEATURE_NAMES if PROC_FS
156 config INSTRUCTION_DECODER
158 depends on KPROBES || PERF_EVENTS || UPROBES
160 config PERF_EVENTS_INTEL_UNCORE
162 depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
166 default "elf32-i386" if X86_32
167 default "elf64-x86-64" if X86_64
169 config ARCH_DEFCONFIG
171 default "arch/x86/configs/i386_defconfig" if X86_32
172 default "arch/x86/configs/x86_64_defconfig" if X86_64
174 config LOCKDEP_SUPPORT
177 config STACKTRACE_SUPPORT
180 config HAVE_LATENCYTOP_SUPPORT
189 config NEED_DMA_MAP_STATE
191 depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB
193 config NEED_SG_DMA_LENGTH
196 config GENERIC_ISA_DMA
198 depends on ISA_DMA_API
203 select GENERIC_BUG_RELATIVE_POINTERS if X86_64
205 config GENERIC_BUG_RELATIVE_POINTERS
208 config GENERIC_HWEIGHT
211 config ARCH_MAY_HAVE_PC_FDC
213 depends on ISA_DMA_API
215 config RWSEM_XCHGADD_ALGORITHM
218 config GENERIC_CALIBRATE_DELAY
221 config ARCH_HAS_CPU_RELAX
224 config ARCH_HAS_CACHE_LINE_SIZE
227 config HAVE_SETUP_PER_CPU_AREA
230 config NEED_PER_CPU_EMBED_FIRST_CHUNK
233 config NEED_PER_CPU_PAGE_FIRST_CHUNK
236 config ARCH_HIBERNATION_POSSIBLE
239 config ARCH_SUSPEND_POSSIBLE
242 config ARCH_WANT_HUGE_PMD_SHARE
245 config ARCH_WANT_GENERAL_HUGETLB
254 config ARCH_SUPPORTS_OPTIMIZED_INLINING
257 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
260 config KASAN_SHADOW_OFFSET
263 default 0xdffffc0000000000
265 config HAVE_INTEL_TXT
267 depends on INTEL_IOMMU && ACPI
271 depends on X86_32 && SMP
275 depends on X86_64 && SMP
277 config X86_32_LAZY_GS
279 depends on X86_32 && !CC_STACKPROTECTOR
281 config ARCH_HWEIGHT_CFLAGS
283 default "-fcall-saved-ecx -fcall-saved-edx" if X86_32
284 default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64
286 config ARCH_SUPPORTS_UPROBES
289 config FIX_EARLYCON_MEM
292 config PGTABLE_LEVELS
298 source "init/Kconfig"
299 source "kernel/Kconfig.freezer"
301 menu "Processor type and features"
304 bool "DMA memory allocation support" if EXPERT
307 DMA memory allocation support allows devices with less than 32-bit
308 addressing to allocate within the first 16MB of address space.
309 Disable if no such devices will be used.
314 bool "Symmetric multi-processing support"
316 This enables support for systems with more than one CPU. If you have
317 a system with only one CPU, say N. If you have a system with more
320 If you say N here, the kernel will run on uni- and multiprocessor
321 machines, but will use only one CPU of a multiprocessor machine. If
322 you say Y here, the kernel will run on many, but not all,
323 uniprocessor machines. On a uniprocessor machine, the kernel
324 will run faster if you say N here.
326 Note that if you say Y here and choose architecture "586" or
327 "Pentium" under "Processor family", the kernel will not work on 486
328 architectures. Similarly, multiprocessor kernels for the "PPro"
329 architecture may not work on all Pentium based boards.
331 People using multiprocessor machines who say Y here should also say
332 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
333 Management" code will be disabled if you say Y here.
335 See also <file:Documentation/x86/i386/IO-APIC.txt>,
336 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
337 <http://www.tldp.org/docs.html#howto>.
339 If you don't know what to do here, say N.
341 config X86_FEATURE_NAMES
342 bool "Processor feature human-readable names" if EMBEDDED
345 This option compiles in a table of x86 feature bits and corresponding
346 names. This is required to support /proc/cpuinfo and a few kernel
347 messages. You can disable this to save space, at the expense of
348 making those few kernel messages show numeric feature bits instead.
353 bool "Support x2apic"
354 depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST)
356 This enables x2apic support on CPUs that have this feature.
358 This allows 32-bit apic IDs (so it can support very large systems),
359 and accesses the local apic via MSRs not via mmio.
361 If you don't know what to do here, say N.
364 bool "Enable MPS table" if ACPI || SFI
366 depends on X86_LOCAL_APIC
368 For old smp systems that do not have proper acpi support. Newer systems
369 (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
372 bool "Support for big SMP systems with more than 8 CPUs"
373 depends on X86_32 && SMP
375 This option is needed for the systems that have more than 8 CPUs
379 depends on X86_GOLDFISH
382 config X86_EXTENDED_PLATFORM
383 bool "Support for extended (non-PC) x86 platforms"
386 If you disable this option then the kernel will only support
387 standard PC platforms. (which covers the vast majority of
390 If you enable this option then you'll be able to select support
391 for the following (non-PC) 32 bit x86 platforms:
392 Goldfish (Android emulator)
395 SGI 320/540 (Visual Workstation)
396 STA2X11-based (e.g. Northville)
397 Moorestown MID devices
399 If you have one of these systems, or if you want to build a
400 generic distribution kernel, say Y here - otherwise say N.
404 config X86_EXTENDED_PLATFORM
405 bool "Support for extended (non-PC) x86 platforms"
408 If you disable this option then the kernel will only support
409 standard PC platforms. (which covers the vast majority of
412 If you enable this option then you'll be able to select support
413 for the following (non-PC) 64 bit x86 platforms:
418 If you have one of these systems, or if you want to build a
419 generic distribution kernel, say Y here - otherwise say N.
421 # This is an alphabetically sorted list of 64 bit extended platforms
422 # Please maintain the alphabetic order if and when there are additions
424 bool "Numascale NumaChip"
426 depends on X86_EXTENDED_PLATFORM
429 depends on X86_X2APIC
430 depends on PCI_MMCONFIG
432 Adds support for Numascale NumaChip large-SMP systems. Needed to
433 enable more than ~168 cores.
434 If you don't have one of these, you should say N here.
438 select HYPERVISOR_GUEST
440 depends on X86_64 && PCI
441 depends on X86_EXTENDED_PLATFORM
444 Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
445 supposed to run on these EM64T-based machines. Only choose this option
446 if you have one of these machines.
449 bool "SGI Ultraviolet"
451 depends on X86_EXTENDED_PLATFORM
453 depends on X86_X2APIC
456 This option is needed in order to support SGI Ultraviolet systems.
457 If you don't have one of these, you should say N here.
459 # Following is an alphabetically sorted list of 32 bit extended platforms
460 # Please maintain the alphabetic order if and when there are additions
463 bool "Goldfish (Virtual Platform)"
464 depends on X86_EXTENDED_PLATFORM
466 Enable support for the Goldfish virtual platform used primarily
467 for Android development. Unless you are building for the Android
468 Goldfish emulator say N here.
471 bool "CE4100 TV platform"
473 depends on PCI_GODIRECT
474 depends on X86_IO_APIC
476 depends on X86_EXTENDED_PLATFORM
477 select X86_REBOOTFIXUPS
479 select OF_EARLY_FLATTREE
481 Select for the Intel CE media processor (CE4100) SOC.
482 This option compiles in support for the CE4100 SOC for settop
483 boxes and media devices.
486 bool "Intel MID platform support"
488 depends on X86_EXTENDED_PLATFORM
489 depends on X86_PLATFORM_DEVICES
492 depends on X86_IO_APIC
498 select MFD_INTEL_MSIC
500 Select to build a kernel capable of supporting Intel MID (Mobile
501 Internet Device) platform systems which do not have the PCI legacy
502 interfaces. If you are building for a PC class system say N here.
504 Intel MID platforms are based on an Intel processor and chipset which
505 consume less power than most of the x86 derivatives.
507 config X86_INTEL_QUARK
508 bool "Intel Quark platform support"
510 depends on X86_EXTENDED_PLATFORM
511 depends on X86_PLATFORM_DEVICES
515 depends on X86_IO_APIC
520 Select to include support for Quark X1000 SoC.
521 Say Y here if you have a Quark based system such as the Arduino
522 compatible Intel Galileo.
524 config X86_INTEL_LPSS
525 bool "Intel Low Power Subsystem Support"
530 Select to build support for Intel Low Power Subsystem such as
531 found on Intel Lynxpoint PCH. Selecting this option enables
532 things like clock tree (common clock framework) and pincontrol
533 which are needed by the LPSS peripheral drivers.
535 config X86_AMD_PLATFORM_DEVICE
536 bool "AMD ACPI2Platform devices support"
541 Select to interpret AMD specific ACPI device to platform device
542 such as I2C, UART, GPIO found on AMD Carrizo and later chipsets.
543 I2C and UART depend on COMMON_CLK to set clock. GPIO driver is
544 implemented under PINCTRL subsystem.
547 tristate "Intel SoC IOSF Sideband support for SoC platforms"
550 This option enables sideband register access support for Intel SoC
551 platforms. On these platforms the IOSF sideband is used in lieu of
552 MSR's for some register accesses, mostly but not limited to thermal
553 and power. Drivers may query the availability of this device to
554 determine if they need the sideband in order to work on these
555 platforms. The sideband is available on the following SoC products.
556 This list is not meant to be exclusive.
561 You should say Y if you are running a kernel on one of these SoC's.
563 config IOSF_MBI_DEBUG
564 bool "Enable IOSF sideband access through debugfs"
565 depends on IOSF_MBI && DEBUG_FS
567 Select this option to expose the IOSF sideband access registers (MCR,
568 MDR, MCRX) through debugfs to write and read register information from
569 different units on the SoC. This is most useful for obtaining device
570 state information for debug and analysis. As this is a general access
571 mechanism, users of this option would have specific knowledge of the
572 device they want to access.
574 If you don't require the option or are in doubt, say N.
577 bool "RDC R-321x SoC"
579 depends on X86_EXTENDED_PLATFORM
581 select X86_REBOOTFIXUPS
583 This option is needed for RDC R-321x system-on-chip, also known
585 If you don't have one of these chips, you should say N here.
587 config X86_32_NON_STANDARD
588 bool "Support non-standard 32-bit SMP architectures"
589 depends on X86_32 && SMP
590 depends on X86_EXTENDED_PLATFORM
592 This option compiles in the bigsmp and STA2X11 default
593 subarchitectures. It is intended for a generic binary
594 kernel. If you select them all, kernel will probe it one by
595 one and will fallback to default.
597 # Alphabetically sorted list of Non standard 32 bit platforms
599 config X86_SUPPORTS_MEMORY_FAILURE
601 # MCE code calls memory_failure():
603 # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
604 # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
605 depends on X86_64 || !SPARSEMEM
606 select ARCH_SUPPORTS_MEMORY_FAILURE
609 bool "STA2X11 Companion Chip Support"
610 depends on X86_32_NON_STANDARD && PCI
611 select X86_DEV_DMA_OPS
615 select ARCH_REQUIRE_GPIOLIB
618 This adds support for boards based on the STA2X11 IO-Hub,
619 a.k.a. "ConneXt". The chip is used in place of the standard
620 PC chipset, so all "standard" peripherals are missing. If this
621 option is selected the kernel will still be able to boot on
622 standard PC machines.
625 tristate "Eurobraille/Iris poweroff module"
628 The Iris machines from EuroBraille do not have APM or ACPI support
629 to shut themselves down properly. A special I/O sequence is
630 needed to do so, which is what this module does at
633 This is only for Iris machines from EuroBraille.
637 config SCHED_OMIT_FRAME_POINTER
639 prompt "Single-depth WCHAN output"
642 Calculate simpler /proc/<PID>/wchan values. If this option
643 is disabled then wchan values will recurse back to the
644 caller function. This provides more accurate wchan values,
645 at the expense of slightly more scheduling overhead.
647 If in doubt, say "Y".
649 menuconfig HYPERVISOR_GUEST
650 bool "Linux guest support"
652 Say Y here to enable options for running Linux under various hyper-
653 visors. This option enables basic hypervisor detection and platform
656 If you say N, all options in this submenu will be skipped and
657 disabled, and Linux guest support won't be built in.
662 bool "Enable paravirtualization code"
664 This changes the kernel so it can modify itself when it is run
665 under a hypervisor, potentially improving performance significantly
666 over full virtualization. However, when run without a hypervisor
667 the kernel is theoretically slower and slightly larger.
669 config PARAVIRT_DEBUG
670 bool "paravirt-ops debugging"
671 depends on PARAVIRT && DEBUG_KERNEL
673 Enable to debug paravirt_ops internals. Specifically, BUG if
674 a paravirt_op is missing when it is called.
676 config PARAVIRT_SPINLOCKS
677 bool "Paravirtualization layer for spinlocks"
678 depends on PARAVIRT && SMP
679 select UNINLINE_SPIN_UNLOCK if !QUEUED_SPINLOCKS
681 Paravirtualized spinlocks allow a pvops backend to replace the
682 spinlock implementation with something virtualization-friendly
683 (for example, block the virtual CPU rather than spinning).
685 It has a minimal impact on native kernels and gives a nice performance
686 benefit on paravirtualized KVM / Xen kernels.
688 If you are unsure how to answer this question, answer Y.
690 source "arch/x86/xen/Kconfig"
693 bool "KVM Guest support (including kvmclock)"
695 select PARAVIRT_CLOCK
698 This option enables various optimizations for running under the KVM
699 hypervisor. It includes a paravirtualized clock, so that instead
700 of relying on a PIT (or probably other) emulation by the
701 underlying device model, the host provides the guest with
702 timing infrastructure such as time of day, and system time
705 bool "Enable debug information for KVM Guests in debugfs"
706 depends on KVM_GUEST && DEBUG_FS
709 This option enables collection of various statistics for KVM guest.
710 Statistics are displayed in debugfs filesystem. Enabling this option
711 may incur significant overhead.
713 source "arch/x86/lguest/Kconfig"
715 config PARAVIRT_TIME_ACCOUNTING
716 bool "Paravirtual steal time accounting"
720 Select this option to enable fine granularity task steal time
721 accounting. Time spent executing other tasks in parallel with
722 the current vCPU is discounted from the vCPU power. To account for
723 that, there can be a small performance impact.
725 If in doubt, say N here.
727 config PARAVIRT_CLOCK
730 endif #HYPERVISOR_GUEST
735 source "arch/x86/Kconfig.cpu"
739 prompt "HPET Timer Support" if X86_32
741 Use the IA-PC HPET (High Precision Event Timer) to manage
742 time in preference to the PIT and RTC, if a HPET is
744 HPET is the next generation timer replacing legacy 8254s.
745 The HPET provides a stable time base on SMP
746 systems, unlike the TSC, but it is more expensive to access,
747 as it is off-chip. You can find the HPET spec at
748 <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
750 You can safely choose Y here. However, HPET will only be
751 activated if the platform and the BIOS support this feature.
752 Otherwise the 8254 will be used for timing services.
754 Choose N to continue using the legacy 8254 timer.
756 config HPET_EMULATE_RTC
758 depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
761 def_bool y if X86_INTEL_MID
762 prompt "Intel MID APB Timer Support" if X86_INTEL_MID
764 depends on X86_INTEL_MID && SFI
766 APB timer is the replacement for 8254, HPET on X86 MID platforms.
767 The APBT provides a stable time base on SMP
768 systems, unlike the TSC, but it is more expensive to access,
769 as it is off-chip. APB timers are always running regardless of CPU
770 C states, they are used as per CPU clockevent device when possible.
772 # Mark as expert because too many people got it wrong.
773 # The code disables itself when not needed.
776 select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
777 bool "Enable DMI scanning" if EXPERT
779 Enabled scanning of DMI to identify machine quirks. Say Y
780 here unless you have verified that your setup is not
781 affected by entries in the DMI blacklist. Required by PNP
785 bool "Old AMD GART IOMMU support"
787 depends on X86_64 && PCI && AMD_NB
789 Provides a driver for older AMD Athlon64/Opteron/Turion/Sempron
790 GART based hardware IOMMUs.
792 The GART supports full DMA access for devices with 32-bit access
793 limitations, on systems with more than 3 GB. This is usually needed
794 for USB, sound, many IDE/SATA chipsets and some other devices.
796 Newer systems typically have a modern AMD IOMMU, supported via
797 the CONFIG_AMD_IOMMU=y config option.
799 In normal configurations this driver is only active when needed:
800 there's more than 3 GB of memory and the system contains a
801 32-bit limited device.
806 bool "IBM Calgary IOMMU support"
808 depends on X86_64 && PCI
810 Support for hardware IOMMUs in IBM's xSeries x366 and x460
811 systems. Needed to run systems with more than 3GB of memory
812 properly with 32-bit PCI devices that do not support DAC
813 (Double Address Cycle). Calgary also supports bus level
814 isolation, where all DMAs pass through the IOMMU. This
815 prevents them from going anywhere except their intended
816 destination. This catches hard-to-find kernel bugs and
817 mis-behaving drivers and devices that do not use the DMA-API
818 properly to set up their DMA buffers. The IOMMU can be
819 turned off at boot time with the iommu=off parameter.
820 Normally the kernel will make the right choice by itself.
823 config CALGARY_IOMMU_ENABLED_BY_DEFAULT
825 prompt "Should Calgary be enabled by default?"
826 depends on CALGARY_IOMMU
828 Should Calgary be enabled by default? if you choose 'y', Calgary
829 will be used (if it exists). If you choose 'n', Calgary will not be
830 used even if it exists. If you choose 'n' and would like to use
831 Calgary anyway, pass 'iommu=calgary' on the kernel command line.
834 # need this always selected by IOMMU for the VIA workaround
838 Support for software bounce buffers used on x86-64 systems
839 which don't have a hardware IOMMU. Using this PCI devices
840 which can only access 32-bits of memory can be used on systems
841 with more than 3 GB of memory.
846 depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU
849 bool "Enable Maximum number of SMP Processors and NUMA Nodes"
850 depends on X86_64 && SMP && DEBUG_KERNEL
851 select CPUMASK_OFFSTACK
853 Enable maximum number of CPUS and NUMA Nodes for this architecture.
857 int "Maximum number of CPUs" if SMP && !MAXSMP
858 range 2 8 if SMP && X86_32 && !X86_BIGSMP
859 range 2 512 if SMP && !MAXSMP && !CPUMASK_OFFSTACK
860 range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
862 default "8192" if MAXSMP
863 default "32" if SMP && X86_BIGSMP
864 default "8" if SMP && X86_32
867 This allows you to specify the maximum number of CPUs which this
868 kernel will support. If CPUMASK_OFFSTACK is enabled, the maximum
869 supported value is 8192, otherwise the maximum value is 512. The
870 minimum value which makes sense is 2.
872 This is purely to save memory - each supported CPU adds
873 approximately eight kilobytes to the kernel image.
876 bool "SMT (Hyperthreading) scheduler support"
879 SMT scheduler support improves the CPU scheduler's decision making
880 when dealing with Intel Pentium 4 chips with HyperThreading at a
881 cost of slightly increased overhead in some places. If unsure say
886 prompt "Multi-core scheduler support"
889 Multi-core scheduler support improves the CPU scheduler's decision
890 making when dealing with multi-core CPU chips at a cost of slightly
891 increased overhead in some places. If unsure say N here.
893 source "kernel/Kconfig.preempt"
897 depends on !SMP && X86_LOCAL_APIC
900 bool "Local APIC support on uniprocessors" if !PCI_MSI
902 depends on X86_32 && !SMP && !X86_32_NON_STANDARD
904 A local APIC (Advanced Programmable Interrupt Controller) is an
905 integrated interrupt controller in the CPU. If you have a single-CPU
906 system which has a processor with a local APIC, you can say Y here to
907 enable and use it. If you say Y here even though your machine doesn't
908 have a local APIC, then the kernel will still run with no slowdown at
909 all. The local APIC supports CPU-generated self-interrupts (timer,
910 performance counters), and the NMI watchdog which detects hard
914 bool "IO-APIC support on uniprocessors"
915 depends on X86_UP_APIC
917 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
918 SMP-capable replacement for PC-style interrupt controllers. Most
919 SMP systems and many recent uniprocessor systems have one.
921 If you have a single-CPU system with an IO-APIC, you can say Y here
922 to use it. If you say Y here even though your machine doesn't have
923 an IO-APIC, then the kernel will still run with no slowdown at all.
925 config X86_LOCAL_APIC
927 depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
928 select IRQ_DOMAIN_HIERARCHY
929 select PCI_MSI_IRQ_DOMAIN if PCI_MSI
933 depends on X86_LOCAL_APIC || X86_UP_IOAPIC
935 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
936 bool "Reroute for broken boot IRQs"
937 depends on X86_IO_APIC
939 This option enables a workaround that fixes a source of
940 spurious interrupts. This is recommended when threaded
941 interrupt handling is used on systems where the generation of
942 superfluous "boot interrupts" cannot be disabled.
944 Some chipsets generate a legacy INTx "boot IRQ" when the IRQ
945 entry in the chipset's IO-APIC is masked (as, e.g. the RT
946 kernel does during interrupt handling). On chipsets where this
947 boot IRQ generation cannot be disabled, this workaround keeps
948 the original IRQ line masked so that only the equivalent "boot
949 IRQ" is delivered to the CPUs. The workaround also tells the
950 kernel to set up the IRQ handler on the boot IRQ line. In this
951 way only one interrupt is delivered to the kernel. Otherwise
952 the spurious second interrupt may cause the kernel to bring
953 down (vital) interrupt lines.
955 Only affects "broken" chipsets. Interrupt sharing may be
956 increased on these systems.
959 bool "Machine Check / overheating reporting"
960 select GENERIC_ALLOCATOR
963 Machine Check support allows the processor to notify the
964 kernel if it detects a problem (e.g. overheating, data corruption).
965 The action the kernel takes depends on the severity of the problem,
966 ranging from warning messages to halting the machine.
970 prompt "Intel MCE features"
971 depends on X86_MCE && X86_LOCAL_APIC
973 Additional support for intel specific MCE features such as
978 prompt "AMD MCE features"
979 depends on X86_MCE && X86_LOCAL_APIC
981 Additional support for AMD specific MCE features such as
982 the DRAM Error Threshold.
984 config X86_ANCIENT_MCE
985 bool "Support for old Pentium 5 / WinChip machine checks"
986 depends on X86_32 && X86_MCE
988 Include support for machine check handling on old Pentium 5 or WinChip
989 systems. These typically need to be enabled explicitly on the command
992 config X86_MCE_THRESHOLD
993 depends on X86_MCE_AMD || X86_MCE_INTEL
996 config X86_MCE_INJECT
998 tristate "Machine check injector support"
1000 Provide support for injecting machine checks for testing purposes.
1001 If you don't know what a machine check is and you don't do kernel
1002 QA it is safe to say n.
1004 config X86_THERMAL_VECTOR
1006 depends on X86_MCE_INTEL
1008 config X86_LEGACY_VM86
1009 bool "Legacy VM86 support"
1013 This option allows user programs to put the CPU into V8086
1014 mode, which is an 80286-era approximation of 16-bit real mode.
1016 Some very old versions of X and/or vbetool require this option
1017 for user mode setting. Similarly, DOSEMU will use it if
1018 available to accelerate real mode DOS programs. However, any
1019 recent version of DOSEMU, X, or vbetool should be fully
1020 functional even without kernel VM86 support, as they will all
1021 fall back to software emulation. Nevertheless, if you are using
1022 a 16-bit DOS program where 16-bit performance matters, vm86
1023 mode might be faster than emulation and you might want to
1026 Note that any app that works on a 64-bit kernel is unlikely to
1027 need this option, as 64-bit kernels don't, and can't, support
1028 V8086 mode. This option is also unrelated to 16-bit protected
1029 mode and is not needed to run most 16-bit programs under Wine.
1031 Enabling this option increases the complexity of the kernel
1032 and slows down exception handling a tiny bit.
1034 If unsure, say N here.
1038 default X86_LEGACY_VM86
1041 bool "Enable support for 16-bit segments" if EXPERT
1043 depends on MODIFY_LDT_SYSCALL
1045 This option is required by programs like Wine to run 16-bit
1046 protected mode legacy code on x86 processors. Disabling
1047 this option saves about 300 bytes on i386, or around 6K text
1048 plus 16K runtime memory on x86-64,
1052 depends on X86_16BIT && X86_32
1056 depends on X86_16BIT && X86_64
1058 config X86_VSYSCALL_EMULATION
1059 bool "Enable vsyscall emulation" if EXPERT
1063 This enables emulation of the legacy vsyscall page. Disabling
1064 it is roughly equivalent to booting with vsyscall=none, except
1065 that it will also disable the helpful warning if a program
1066 tries to use a vsyscall. With this option set to N, offending
1067 programs will just segfault, citing addresses of the form
1070 This option is required by many programs built before 2013, and
1071 care should be used even with newer programs if set to N.
1073 Disabling this option saves about 7K of kernel size and
1074 possibly 4K of additional runtime pagetable memory.
1077 tristate "Toshiba Laptop support"
1080 This adds a driver to safely access the System Management Mode of
1081 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
1082 not work on models with a Phoenix BIOS. The System Management Mode
1083 is used to set the BIOS and power saving options on Toshiba portables.
1085 For information on utilities to make use of this driver see the
1086 Toshiba Linux utilities web site at:
1087 <http://www.buzzard.org.uk/toshiba/>.
1089 Say Y if you intend to run this kernel on a Toshiba portable.
1093 tristate "Dell i8k legacy laptop support"
1095 select SENSORS_DELL_SMM
1097 This option enables legacy /proc/i8k userspace interface in hwmon
1098 dell-smm-hwmon driver. Character file /proc/i8k reports bios version,
1099 temperature and allows controlling fan speeds of Dell laptops via
1100 System Management Mode. For old Dell laptops (like Dell Inspiron 8000)
1101 it reports also power and hotkey status. For fan speed control is
1102 needed userspace package i8kutils.
1104 Say Y if you intend to run this kernel on old Dell laptops or want to
1105 use userspace package i8kutils.
1108 config X86_REBOOTFIXUPS
1109 bool "Enable X86 board specific fixups for reboot"
1112 This enables chipset and/or board specific fixups to be done
1113 in order to get reboot to work correctly. This is only needed on
1114 some combinations of hardware and BIOS. The symptom, for which
1115 this config is intended, is when reboot ends with a stalled/hung
1118 Currently, the only fixup is for the Geode machines using
1119 CS5530A and CS5536 chipsets and the RDC R-321x SoC.
1121 Say Y if you want to enable the fixup. Currently, it's safe to
1122 enable this option even if you don't need it.
1126 tristate "CPU microcode loading support"
1127 depends on CPU_SUP_AMD || CPU_SUP_INTEL
1131 If you say Y here, you will be able to update the microcode on
1132 certain Intel and AMD processors. The Intel support is for the
1133 IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4,
1134 Xeon etc. The AMD support is for families 0x10 and later. You will
1135 obviously need the actual microcode binary data itself which is not
1136 shipped with the Linux kernel.
1138 This option selects the general module only, you need to select
1139 at least one vendor specific module as well.
1141 To compile this driver as a module, choose M here: the module
1142 will be called microcode.
1144 config MICROCODE_INTEL
1145 bool "Intel microcode loading support"
1146 depends on MICROCODE
1150 This options enables microcode patch loading support for Intel
1153 For the current Intel microcode data package go to
1154 <https://downloadcenter.intel.com> and search for
1155 'Linux Processor Microcode Data File'.
1157 config MICROCODE_AMD
1158 bool "AMD microcode loading support"
1159 depends on MICROCODE
1162 If you select this option, microcode patch loading support for AMD
1163 processors will be enabled.
1165 config MICROCODE_OLD_INTERFACE
1167 depends on MICROCODE
1169 config MICROCODE_INTEL_EARLY
1172 config MICROCODE_AMD_EARLY
1175 config MICROCODE_EARLY
1176 bool "Early load microcode"
1177 depends on MICROCODE=y && BLK_DEV_INITRD
1178 select MICROCODE_INTEL_EARLY if MICROCODE_INTEL
1179 select MICROCODE_AMD_EARLY if MICROCODE_AMD
1182 This option provides functionality to read additional microcode data
1183 at the beginning of initrd image. The data tells kernel to load
1184 microcode to CPU's as early as possible. No functional change if no
1185 microcode data is glued to the initrd, therefore it's safe to say Y.
1188 tristate "/dev/cpu/*/msr - Model-specific register support"
1190 This device gives privileged processes access to the x86
1191 Model-Specific Registers (MSRs). It is a character device with
1192 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
1193 MSR accesses are directed to a specific CPU on multi-processor
1197 tristate "/dev/cpu/*/cpuid - CPU information support"
1199 This device gives processes access to the x86 CPUID instruction to
1200 be executed on a specific processor. It is a character device
1201 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
1205 prompt "High Memory Support"
1212 Linux can use up to 64 Gigabytes of physical memory on x86 systems.
1213 However, the address space of 32-bit x86 processors is only 4
1214 Gigabytes large. That means that, if you have a large amount of
1215 physical memory, not all of it can be "permanently mapped" by the
1216 kernel. The physical memory that's not permanently mapped is called
1219 If you are compiling a kernel which will never run on a machine with
1220 more than 1 Gigabyte total physical RAM, answer "off" here (default
1221 choice and suitable for most users). This will result in a "3GB/1GB"
1222 split: 3GB are mapped so that each process sees a 3GB virtual memory
1223 space and the remaining part of the 4GB virtual memory space is used
1224 by the kernel to permanently map as much physical memory as
1227 If the machine has between 1 and 4 Gigabytes physical RAM, then
1230 If more than 4 Gigabytes is used then answer "64GB" here. This
1231 selection turns Intel PAE (Physical Address Extension) mode on.
1232 PAE implements 3-level paging on IA32 processors. PAE is fully
1233 supported by Linux, PAE mode is implemented on all recent Intel
1234 processors (Pentium Pro and better). NOTE: If you say "64GB" here,
1235 then the kernel will not boot on CPUs that don't support PAE!
1237 The actual amount of total physical memory will either be
1238 auto detected or can be forced by using a kernel command line option
1239 such as "mem=256M". (Try "man bootparam" or see the documentation of
1240 your boot loader (lilo or loadlin) about how to pass options to the
1241 kernel at boot time.)
1243 If unsure, say "off".
1248 Select this if you have a 32-bit processor and between 1 and 4
1249 gigabytes of physical RAM.
1256 Select this if you have a 32-bit processor and more than 4
1257 gigabytes of physical RAM.
1262 prompt "Memory split" if EXPERT
1266 Select the desired split between kernel and user memory.
1268 If the address range available to the kernel is less than the
1269 physical memory installed, the remaining memory will be available
1270 as "high memory". Accessing high memory is a little more costly
1271 than low memory, as it needs to be mapped into the kernel first.
1272 Note that increasing the kernel address space limits the range
1273 available to user programs, making the address space there
1274 tighter. Selecting anything other than the default 3G/1G split
1275 will also likely make your kernel incompatible with binary-only
1278 If you are not absolutely sure what you are doing, leave this
1282 bool "3G/1G user/kernel split"
1283 config VMSPLIT_3G_OPT
1285 bool "3G/1G user/kernel split (for full 1G low memory)"
1287 bool "2G/2G user/kernel split"
1288 config VMSPLIT_2G_OPT
1290 bool "2G/2G user/kernel split (for full 2G low memory)"
1292 bool "1G/3G user/kernel split"
1297 default 0xB0000000 if VMSPLIT_3G_OPT
1298 default 0x80000000 if VMSPLIT_2G
1299 default 0x78000000 if VMSPLIT_2G_OPT
1300 default 0x40000000 if VMSPLIT_1G
1306 depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
1309 bool "PAE (Physical Address Extension) Support"
1310 depends on X86_32 && !HIGHMEM4G
1312 PAE is required for NX support, and furthermore enables
1313 larger swapspace support for non-overcommit purposes. It
1314 has the cost of more pagetable lookup overhead, and also
1315 consumes more pagetable space per process.
1317 config ARCH_PHYS_ADDR_T_64BIT
1319 depends on X86_64 || X86_PAE
1321 config ARCH_DMA_ADDR_T_64BIT
1323 depends on X86_64 || HIGHMEM64G
1325 config X86_DIRECT_GBPAGES
1327 depends on X86_64 && !DEBUG_PAGEALLOC && !KMEMCHECK
1329 Certain kernel features effectively disable kernel
1330 linear 1 GB mappings (even if the CPU otherwise
1331 supports them), so don't confuse the user by printing
1332 that we have them enabled.
1334 # Common NUMA Features
1336 bool "Numa Memory Allocation and Scheduler Support"
1338 depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
1339 default y if X86_BIGSMP
1341 Enable NUMA (Non Uniform Memory Access) support.
1343 The kernel will try to allocate memory used by a CPU on the
1344 local memory controller of the CPU and add some more
1345 NUMA awareness to the kernel.
1347 For 64-bit this is recommended if the system is Intel Core i7
1348 (or later), AMD Opteron, or EM64T NUMA.
1350 For 32-bit this is only needed if you boot a 32-bit
1351 kernel on a 64-bit NUMA platform.
1353 Otherwise, you should say N.
1357 prompt "Old style AMD Opteron NUMA detection"
1358 depends on X86_64 && NUMA && PCI
1360 Enable AMD NUMA node topology detection. You should say Y here if
1361 you have a multi processor AMD system. This uses an old method to
1362 read the NUMA configuration directly from the builtin Northbridge
1363 of Opteron. It is recommended to use X86_64_ACPI_NUMA instead,
1364 which also takes priority if both are compiled in.
1366 config X86_64_ACPI_NUMA
1368 prompt "ACPI NUMA detection"
1369 depends on X86_64 && NUMA && ACPI && PCI
1372 Enable ACPI SRAT based node topology detection.
1374 # Some NUMA nodes have memory ranges that span
1375 # other nodes. Even though a pfn is valid and
1376 # between a node's start and end pfns, it may not
1377 # reside on that node. See memmap_init_zone()
1379 config NODES_SPAN_OTHER_NODES
1381 depends on X86_64_ACPI_NUMA
1384 bool "NUMA emulation"
1387 Enable NUMA emulation. A flat machine will be split
1388 into virtual nodes when booted with "numa=fake=N", where N is the
1389 number of nodes. This is only useful for debugging.
1392 int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
1394 default "10" if MAXSMP
1395 default "6" if X86_64
1397 depends on NEED_MULTIPLE_NODES
1399 Specify the maximum number of NUMA Nodes available on the target
1400 system. Increases memory reserved to accommodate various tables.
1402 config ARCH_HAVE_MEMORY_PRESENT
1404 depends on X86_32 && DISCONTIGMEM
1406 config NEED_NODE_MEMMAP_SIZE
1408 depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
1410 config ARCH_FLATMEM_ENABLE
1412 depends on X86_32 && !NUMA
1414 config ARCH_DISCONTIGMEM_ENABLE
1416 depends on NUMA && X86_32
1418 config ARCH_DISCONTIGMEM_DEFAULT
1420 depends on NUMA && X86_32
1422 config ARCH_SPARSEMEM_ENABLE
1424 depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD
1425 select SPARSEMEM_STATIC if X86_32
1426 select SPARSEMEM_VMEMMAP_ENABLE if X86_64
1428 config ARCH_SPARSEMEM_DEFAULT
1432 config ARCH_SELECT_MEMORY_MODEL
1434 depends on ARCH_SPARSEMEM_ENABLE
1436 config ARCH_MEMORY_PROBE
1437 bool "Enable sysfs memory/probe interface"
1438 depends on X86_64 && MEMORY_HOTPLUG
1440 This option enables a sysfs memory/probe interface for testing.
1441 See Documentation/memory-hotplug.txt for more information.
1442 If you are unsure how to answer this question, answer N.
1444 config ARCH_PROC_KCORE_TEXT
1446 depends on X86_64 && PROC_KCORE
1448 config ILLEGAL_POINTER_VALUE
1451 default 0xdead000000000000 if X86_64
1455 config X86_PMEM_LEGACY_DEVICE
1458 config X86_PMEM_LEGACY
1459 tristate "Support non-standard NVDIMMs and ADR protected memory"
1460 depends on PHYS_ADDR_T_64BIT
1462 select X86_PMEM_LEGACY_DEVICE
1465 Treat memory marked using the non-standard e820 type of 12 as used
1466 by the Intel Sandy Bridge-EP reference BIOS as protected memory.
1467 The kernel will offer these regions to the 'pmem' driver so
1468 they can be used for persistent storage.
1473 bool "Allocate 3rd-level pagetables from highmem"
1476 The VM uses one page table entry for each page of physical memory.
1477 For systems with a lot of RAM, this can be wasteful of precious
1478 low memory. Setting this option will put user-space page table
1479 entries in high memory.
1481 config X86_CHECK_BIOS_CORRUPTION
1482 bool "Check for low memory corruption"
1484 Periodically check for memory corruption in low memory, which
1485 is suspected to be caused by BIOS. Even when enabled in the
1486 configuration, it is disabled at runtime. Enable it by
1487 setting "memory_corruption_check=1" on the kernel command
1488 line. By default it scans the low 64k of memory every 60
1489 seconds; see the memory_corruption_check_size and
1490 memory_corruption_check_period parameters in
1491 Documentation/kernel-parameters.txt to adjust this.
1493 When enabled with the default parameters, this option has
1494 almost no overhead, as it reserves a relatively small amount
1495 of memory and scans it infrequently. It both detects corruption
1496 and prevents it from affecting the running system.
1498 It is, however, intended as a diagnostic tool; if repeatable
1499 BIOS-originated corruption always affects the same memory,
1500 you can use memmap= to prevent the kernel from using that
1503 config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
1504 bool "Set the default setting of memory_corruption_check"
1505 depends on X86_CHECK_BIOS_CORRUPTION
1508 Set whether the default state of memory_corruption_check is
1511 config X86_RESERVE_LOW
1512 int "Amount of low memory, in kilobytes, to reserve for the BIOS"
1516 Specify the amount of low memory to reserve for the BIOS.
1518 The first page contains BIOS data structures that the kernel
1519 must not use, so that page must always be reserved.
1521 By default we reserve the first 64K of physical RAM, as a
1522 number of BIOSes are known to corrupt that memory range
1523 during events such as suspend/resume or monitor cable
1524 insertion, so it must not be used by the kernel.
1526 You can set this to 4 if you are absolutely sure that you
1527 trust the BIOS to get all its memory reservations and usages
1528 right. If you know your BIOS have problems beyond the
1529 default 64K area, you can set this to 640 to avoid using the
1530 entire low memory range.
1532 If you have doubts about the BIOS (e.g. suspend/resume does
1533 not work or there's kernel crashes after certain hardware
1534 hotplug events) then you might want to enable
1535 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check
1536 typical corruption patterns.
1538 Leave this to the default value of 64 if you are unsure.
1540 config MATH_EMULATION
1542 depends on MODIFY_LDT_SYSCALL
1543 prompt "Math emulation" if X86_32
1545 Linux can emulate a math coprocessor (used for floating point
1546 operations) if you don't have one. 486DX and Pentium processors have
1547 a math coprocessor built in, 486SX and 386 do not, unless you added
1548 a 487DX or 387, respectively. (The messages during boot time can
1549 give you some hints here ["man dmesg"].) Everyone needs either a
1550 coprocessor or this emulation.
1552 If you don't have a math coprocessor, you need to say Y here; if you
1553 say Y here even though you have a coprocessor, the coprocessor will
1554 be used nevertheless. (This behavior can be changed with the kernel
1555 command line option "no387", which comes handy if your coprocessor
1556 is broken. Try "man bootparam" or see the documentation of your boot
1557 loader (lilo or loadlin) about how to pass options to the kernel at
1558 boot time.) This means that it is a good idea to say Y here if you
1559 intend to use this kernel on different machines.
1561 More information about the internals of the Linux math coprocessor
1562 emulation can be found in <file:arch/x86/math-emu/README>.
1564 If you are not sure, say Y; apart from resulting in a 66 KB bigger
1565 kernel, it won't hurt.
1569 prompt "MTRR (Memory Type Range Register) support" if EXPERT
1571 On Intel P6 family processors (Pentium Pro, Pentium II and later)
1572 the Memory Type Range Registers (MTRRs) may be used to control
1573 processor access to memory ranges. This is most useful if you have
1574 a video (VGA) card on a PCI or AGP bus. Enabling write-combining
1575 allows bus write transfers to be combined into a larger transfer
1576 before bursting over the PCI/AGP bus. This can increase performance
1577 of image write operations 2.5 times or more. Saying Y here creates a
1578 /proc/mtrr file which may be used to manipulate your processor's
1579 MTRRs. Typically the X server should use this.
1581 This code has a reasonably generic interface so that similar
1582 control registers on other processors can be easily supported
1585 The Cyrix 6x86, 6x86MX and M II processors have Address Range
1586 Registers (ARRs) which provide a similar functionality to MTRRs. For
1587 these, the ARRs are used to emulate the MTRRs.
1588 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
1589 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
1590 write-combining. All of these processors are supported by this code
1591 and it makes sense to say Y here if you have one of them.
1593 Saying Y here also fixes a problem with buggy SMP BIOSes which only
1594 set the MTRRs for the boot CPU and not for the secondary CPUs. This
1595 can lead to all sorts of problems, so it's good to say Y here.
1597 You can safely say Y even if your machine doesn't have MTRRs, you'll
1598 just add about 9 KB to your kernel.
1600 See <file:Documentation/x86/mtrr.txt> for more information.
1602 config MTRR_SANITIZER
1604 prompt "MTRR cleanup support"
1607 Convert MTRR layout from continuous to discrete, so X drivers can
1608 add writeback entries.
1610 Can be disabled with disable_mtrr_cleanup on the kernel command line.
1611 The largest mtrr entry size for a continuous block can be set with
1616 config MTRR_SANITIZER_ENABLE_DEFAULT
1617 int "MTRR cleanup enable value (0-1)"
1620 depends on MTRR_SANITIZER
1622 Enable mtrr cleanup default value
1624 config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
1625 int "MTRR cleanup spare reg num (0-7)"
1628 depends on MTRR_SANITIZER
1630 mtrr cleanup spare entries default, it can be changed via
1631 mtrr_spare_reg_nr=N on the kernel command line.
1635 prompt "x86 PAT support" if EXPERT
1638 Use PAT attributes to setup page level cache control.
1640 PATs are the modern equivalents of MTRRs and are much more
1641 flexible than MTRRs.
1643 Say N here if you see bootup problems (boot crash, boot hang,
1644 spontaneous reboots) or a non-working video driver.
1648 config ARCH_USES_PG_UNCACHED
1654 prompt "x86 architectural random number generator" if EXPERT
1656 Enable the x86 architectural RDRAND instruction
1657 (Intel Bull Mountain technology) to generate random numbers.
1658 If supported, this is a high bandwidth, cryptographically
1659 secure hardware random number generator.
1663 prompt "Supervisor Mode Access Prevention" if EXPERT
1665 Supervisor Mode Access Prevention (SMAP) is a security
1666 feature in newer Intel processors. There is a small
1667 performance cost if this enabled and turned on; there is
1668 also a small increase in the kernel size if this is enabled.
1672 config X86_INTEL_MPX
1673 prompt "Intel MPX (Memory Protection Extensions)"
1675 depends on CPU_SUP_INTEL
1677 MPX provides hardware features that can be used in
1678 conjunction with compiler-instrumented code to check
1679 memory references. It is designed to detect buffer
1680 overflow or underflow bugs.
1682 This option enables running applications which are
1683 instrumented or otherwise use MPX. It does not use MPX
1684 itself inside the kernel or to protect the kernel
1685 against bad memory references.
1687 Enabling this option will make the kernel larger:
1688 ~8k of kernel text and 36 bytes of data on a 64-bit
1689 defconfig. It adds a long to the 'mm_struct' which
1690 will increase the kernel memory overhead of each
1691 process and adds some branches to paths used during
1692 exec() and munmap().
1694 For details, see Documentation/x86/intel_mpx.txt
1699 bool "EFI runtime service support"
1702 select EFI_RUNTIME_WRAPPERS
1704 This enables the kernel to use EFI runtime services that are
1705 available (such as the EFI variable services).
1707 This option is only useful on systems that have EFI firmware.
1708 In addition, you should use the latest ELILO loader available
1709 at <http://elilo.sourceforge.net> in order to take advantage
1710 of EFI runtime services. However, even with this option, the
1711 resultant kernel should continue to boot on existing non-EFI
1715 bool "EFI stub support"
1716 depends on EFI && !X86_USE_3DNOW
1719 This kernel feature allows a bzImage to be loaded directly
1720 by EFI firmware without the use of a bootloader.
1722 See Documentation/efi-stub.txt for more information.
1725 bool "EFI mixed-mode support"
1726 depends on EFI_STUB && X86_64
1728 Enabling this feature allows a 64-bit kernel to be booted
1729 on a 32-bit firmware, provided that your CPU supports 64-bit
1732 Note that it is not possible to boot a mixed-mode enabled
1733 kernel via the EFI boot stub - a bootloader that supports
1734 the EFI handover protocol must be used.
1740 prompt "Enable seccomp to safely compute untrusted bytecode"
1742 This kernel feature is useful for number crunching applications
1743 that may need to compute untrusted bytecode during their
1744 execution. By using pipes or other transports made available to
1745 the process as file descriptors supporting the read/write
1746 syscalls, it's possible to isolate those applications in
1747 their own address space using seccomp. Once seccomp is
1748 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1749 and the task is only allowed to execute a few safe syscalls
1750 defined by each seccomp mode.
1752 If unsure, say Y. Only embedded should say N here.
1754 source kernel/Kconfig.hz
1757 bool "kexec system call"
1760 kexec is a system call that implements the ability to shutdown your
1761 current kernel, and to start another kernel. It is like a reboot
1762 but it is independent of the system firmware. And like a reboot
1763 you can start any kernel with it, not just Linux.
1765 The name comes from the similarity to the exec system call.
1767 It is an ongoing process to be certain the hardware in a machine
1768 is properly shutdown, so do not be surprised if this code does not
1769 initially work for you. As of this writing the exact hardware
1770 interface is strongly in flux, so no good recommendation can be
1774 bool "kexec file based system call"
1779 depends on CRYPTO_SHA256=y
1781 This is new version of kexec system call. This system call is
1782 file based and takes file descriptors as system call argument
1783 for kernel and initramfs as opposed to list of segments as
1784 accepted by previous system call.
1786 config KEXEC_VERIFY_SIG
1787 bool "Verify kernel signature during kexec_file_load() syscall"
1788 depends on KEXEC_FILE
1790 This option makes kernel signature verification mandatory for
1791 the kexec_file_load() syscall.
1793 In addition to that option, you need to enable signature
1794 verification for the corresponding kernel image type being
1795 loaded in order for this to work.
1797 config KEXEC_BZIMAGE_VERIFY_SIG
1798 bool "Enable bzImage signature verification support"
1799 depends on KEXEC_VERIFY_SIG
1800 depends on SIGNED_PE_FILE_VERIFICATION
1801 select SYSTEM_TRUSTED_KEYRING
1803 Enable bzImage signature verification support.
1806 bool "kernel crash dumps"
1807 depends on X86_64 || (X86_32 && HIGHMEM)
1809 Generate crash dump after being started by kexec.
1810 This should be normally only set in special crash dump kernels
1811 which are loaded in the main kernel with kexec-tools into
1812 a specially reserved region and then later executed after
1813 a crash by kdump/kexec. The crash dump kernel must be compiled
1814 to a memory address not used by the main kernel or BIOS using
1815 PHYSICAL_START, or it must be built as a relocatable image
1816 (CONFIG_RELOCATABLE=y).
1817 For more details see Documentation/kdump/kdump.txt
1821 depends on KEXEC && HIBERNATION
1823 Jump between original kernel and kexeced kernel and invoke
1824 code in physical address mode via KEXEC
1826 config PHYSICAL_START
1827 hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
1830 This gives the physical address where the kernel is loaded.
1832 If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
1833 bzImage will decompress itself to above physical address and
1834 run from there. Otherwise, bzImage will run from the address where
1835 it has been loaded by the boot loader and will ignore above physical
1838 In normal kdump cases one does not have to set/change this option
1839 as now bzImage can be compiled as a completely relocatable image
1840 (CONFIG_RELOCATABLE=y) and be used to load and run from a different
1841 address. This option is mainly useful for the folks who don't want
1842 to use a bzImage for capturing the crash dump and want to use a
1843 vmlinux instead. vmlinux is not relocatable hence a kernel needs
1844 to be specifically compiled to run from a specific memory area
1845 (normally a reserved region) and this option comes handy.
1847 So if you are using bzImage for capturing the crash dump,
1848 leave the value here unchanged to 0x1000000 and set
1849 CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux
1850 for capturing the crash dump change this value to start of
1851 the reserved region. In other words, it can be set based on
1852 the "X" value as specified in the "crashkernel=YM@XM"
1853 command line boot parameter passed to the panic-ed
1854 kernel. Please take a look at Documentation/kdump/kdump.txt
1855 for more details about crash dumps.
1857 Usage of bzImage for capturing the crash dump is recommended as
1858 one does not have to build two kernels. Same kernel can be used
1859 as production kernel and capture kernel. Above option should have
1860 gone away after relocatable bzImage support is introduced. But it
1861 is present because there are users out there who continue to use
1862 vmlinux for dump capture. This option should go away down the
1865 Don't change this unless you know what you are doing.
1868 bool "Build a relocatable kernel"
1871 This builds a kernel image that retains relocation information
1872 so it can be loaded someplace besides the default 1MB.
1873 The relocations tend to make the kernel binary about 10% larger,
1874 but are discarded at runtime.
1876 One use is for the kexec on panic case where the recovery kernel
1877 must live at a different physical address than the primary
1880 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
1881 it has been loaded at and the compile time physical address
1882 (CONFIG_PHYSICAL_START) is used as the minimum location.
1884 config RANDOMIZE_BASE
1885 bool "Randomize the address of the kernel image"
1886 depends on RELOCATABLE
1889 Randomizes the physical and virtual address at which the
1890 kernel image is decompressed, as a security feature that
1891 deters exploit attempts relying on knowledge of the location
1892 of kernel internals.
1894 Entropy is generated using the RDRAND instruction if it is
1895 supported. If RDTSC is supported, it is used as well. If
1896 neither RDRAND nor RDTSC are supported, then randomness is
1897 read from the i8254 timer.
1899 The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET,
1900 and aligned according to PHYSICAL_ALIGN. Since the kernel is
1901 built using 2GiB addressing, and PHYSICAL_ALGIN must be at a
1902 minimum of 2MiB, only 10 bits of entropy is theoretically
1903 possible. At best, due to page table layouts, 64-bit can use
1904 9 bits of entropy and 32-bit uses 8 bits.
1908 config RANDOMIZE_BASE_MAX_OFFSET
1909 hex "Maximum kASLR offset allowed" if EXPERT
1910 depends on RANDOMIZE_BASE
1911 range 0x0 0x20000000 if X86_32
1912 default "0x20000000" if X86_32
1913 range 0x0 0x40000000 if X86_64
1914 default "0x40000000" if X86_64
1916 The lesser of RANDOMIZE_BASE_MAX_OFFSET and available physical
1917 memory is used to determine the maximal offset in bytes that will
1918 be applied to the kernel when kernel Address Space Layout
1919 Randomization (kASLR) is active. This must be a multiple of
1922 On 32-bit this is limited to 512MiB by page table layouts. The
1925 On 64-bit this is limited by how the kernel fixmap page table is
1926 positioned, so this cannot be larger than 1GiB currently. Without
1927 RANDOMIZE_BASE, there is a 512MiB to 1.5GiB split between kernel
1928 and modules. When RANDOMIZE_BASE_MAX_OFFSET is above 512MiB, the
1929 modules area will shrink to compensate, up to the current maximum
1930 1GiB to 1GiB split. The default is 1GiB.
1932 If unsure, leave at the default value.
1934 # Relocation on x86 needs some additional build support
1935 config X86_NEED_RELOCS
1937 depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE)
1939 config PHYSICAL_ALIGN
1940 hex "Alignment value to which kernel should be aligned"
1942 range 0x2000 0x1000000 if X86_32
1943 range 0x200000 0x1000000 if X86_64
1945 This value puts the alignment restrictions on physical address
1946 where kernel is loaded and run from. Kernel is compiled for an
1947 address which meets above alignment restriction.
1949 If bootloader loads the kernel at a non-aligned address and
1950 CONFIG_RELOCATABLE is set, kernel will move itself to nearest
1951 address aligned to above value and run from there.
1953 If bootloader loads the kernel at a non-aligned address and
1954 CONFIG_RELOCATABLE is not set, kernel will ignore the run time
1955 load address and decompress itself to the address it has been
1956 compiled for and run from there. The address for which kernel is
1957 compiled already meets above alignment restrictions. Hence the
1958 end result is that kernel runs from a physical address meeting
1959 above alignment restrictions.
1961 On 32-bit this value must be a multiple of 0x2000. On 64-bit
1962 this value must be a multiple of 0x200000.
1964 Don't change this unless you know what you are doing.
1967 bool "Support for hot-pluggable CPUs"
1970 Say Y here to allow turning CPUs off and on. CPUs can be
1971 controlled through /sys/devices/system/cpu.
1972 ( Note: power management support will enable this option
1973 automatically on SMP systems. )
1974 Say N if you want to disable CPU hotplug.
1976 config BOOTPARAM_HOTPLUG_CPU0
1977 bool "Set default setting of cpu0_hotpluggable"
1979 depends on HOTPLUG_CPU
1981 Set whether default state of cpu0_hotpluggable is on or off.
1983 Say Y here to enable CPU0 hotplug by default. If this switch
1984 is turned on, there is no need to give cpu0_hotplug kernel
1985 parameter and the CPU0 hotplug feature is enabled by default.
1987 Please note: there are two known CPU0 dependencies if you want
1988 to enable the CPU0 hotplug feature either by this switch or by
1989 cpu0_hotplug kernel parameter.
1991 First, resume from hibernate or suspend always starts from CPU0.
1992 So hibernate and suspend are prevented if CPU0 is offline.
1994 Second dependency is PIC interrupts always go to CPU0. CPU0 can not
1995 offline if any interrupt can not migrate out of CPU0. There may
1996 be other CPU0 dependencies.
1998 Please make sure the dependencies are under your control before
1999 you enable this feature.
2001 Say N if you don't want to enable CPU0 hotplug feature by default.
2002 You still can enable the CPU0 hotplug feature at boot by kernel
2003 parameter cpu0_hotplug.
2005 config DEBUG_HOTPLUG_CPU0
2007 prompt "Debug CPU0 hotplug"
2008 depends on HOTPLUG_CPU
2010 Enabling this option offlines CPU0 (if CPU0 can be offlined) as
2011 soon as possible and boots up userspace with CPU0 offlined. User
2012 can online CPU0 back after boot time.
2014 To debug CPU0 hotplug, you need to enable CPU0 offline/online
2015 feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during
2016 compilation or giving cpu0_hotplug kernel parameter at boot.
2022 prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)"
2023 depends on X86_32 || IA32_EMULATION
2025 Certain buggy versions of glibc will crash if they are
2026 presented with a 32-bit vDSO that is not mapped at the address
2027 indicated in its segment table.
2029 The bug was introduced by f866314b89d56845f55e6f365e18b31ec978ec3a
2030 and fixed by 3b3ddb4f7db98ec9e912ccdf54d35df4aa30e04a and
2031 49ad572a70b8aeb91e57483a11dd1b77e31c4468. Glibc 2.3.3 is
2032 the only released version with the bug, but OpenSUSE 9
2033 contains a buggy "glibc 2.3.2".
2035 The symptom of the bug is that everything crashes on startup, saying:
2036 dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed!
2038 Saying Y here changes the default value of the vdso32 boot
2039 option from 1 to 0, which turns off the 32-bit vDSO entirely.
2040 This works around the glibc bug but hurts performance.
2042 If unsure, say N: if you are compiling your own kernel, you
2043 are unlikely to be using a buggy version of glibc.
2046 bool "Built-in kernel command line"
2048 Allow for specifying boot arguments to the kernel at
2049 build time. On some systems (e.g. embedded ones), it is
2050 necessary or convenient to provide some or all of the
2051 kernel boot arguments with the kernel itself (that is,
2052 to not rely on the boot loader to provide them.)
2054 To compile command line arguments into the kernel,
2055 set this option to 'Y', then fill in the
2056 boot arguments in CONFIG_CMDLINE.
2058 Systems with fully functional boot loaders (i.e. non-embedded)
2059 should leave this option set to 'N'.
2062 string "Built-in kernel command string"
2063 depends on CMDLINE_BOOL
2066 Enter arguments here that should be compiled into the kernel
2067 image and used at boot time. If the boot loader provides a
2068 command line at boot time, it is appended to this string to
2069 form the full kernel command line, when the system boots.
2071 However, you can use the CONFIG_CMDLINE_OVERRIDE option to
2072 change this behavior.
2074 In most cases, the command line (whether built-in or provided
2075 by the boot loader) should specify the device for the root
2078 config CMDLINE_OVERRIDE
2079 bool "Built-in command line overrides boot loader arguments"
2080 depends on CMDLINE_BOOL
2082 Set this option to 'Y' to have the kernel ignore the boot loader
2083 command line, and use ONLY the built-in command line.
2085 This is used to work around broken boot loaders. This should
2086 be set to 'N' under normal conditions.
2088 config MODIFY_LDT_SYSCALL
2089 bool "Enable the LDT (local descriptor table)" if EXPERT
2092 Linux can allow user programs to install a per-process x86
2093 Local Descriptor Table (LDT) using the modify_ldt(2) system
2094 call. This is required to run 16-bit or segmented code such as
2095 DOSEMU or some Wine programs. It is also used by some very old
2096 threading libraries.
2098 Enabling this feature adds a small amount of overhead to
2099 context switches and increases the low-level kernel attack
2100 surface. Disabling it removes the modify_ldt(2) system call.
2102 Saying 'N' here may make sense for embedded or server kernels.
2104 source "kernel/livepatch/Kconfig"
2108 config ARCH_ENABLE_MEMORY_HOTPLUG
2110 depends on X86_64 || (X86_32 && HIGHMEM)
2112 config ARCH_ENABLE_MEMORY_HOTREMOVE
2114 depends on MEMORY_HOTPLUG
2116 config USE_PERCPU_NUMA_NODE_ID
2120 config ARCH_ENABLE_SPLIT_PMD_PTLOCK
2122 depends on X86_64 || X86_PAE
2124 config ARCH_ENABLE_HUGEPAGE_MIGRATION
2126 depends on X86_64 && HUGETLB_PAGE && MIGRATION
2128 menu "Power management and ACPI options"
2130 config ARCH_HIBERNATION_HEADER
2132 depends on X86_64 && HIBERNATION
2134 source "kernel/power/Kconfig"
2136 source "drivers/acpi/Kconfig"
2138 source "drivers/sfi/Kconfig"
2145 tristate "APM (Advanced Power Management) BIOS support"
2146 depends on X86_32 && PM_SLEEP
2148 APM is a BIOS specification for saving power using several different
2149 techniques. This is mostly useful for battery powered laptops with
2150 APM compliant BIOSes. If you say Y here, the system time will be
2151 reset after a RESUME operation, the /proc/apm device will provide
2152 battery status information, and user-space programs will receive
2153 notification of APM "events" (e.g. battery status change).
2155 If you select "Y" here, you can disable actual use of the APM
2156 BIOS by passing the "apm=off" option to the kernel at boot time.
2158 Note that the APM support is almost completely disabled for
2159 machines with more than one CPU.
2161 In order to use APM, you will need supporting software. For location
2162 and more information, read <file:Documentation/power/apm-acpi.txt>
2163 and the Battery Powered Linux mini-HOWTO, available from
2164 <http://www.tldp.org/docs.html#howto>.
2166 This driver does not spin down disk drives (see the hdparm(8)
2167 manpage ("man 8 hdparm") for that), and it doesn't turn off
2168 VESA-compliant "green" monitors.
2170 This driver does not support the TI 4000M TravelMate and the ACER
2171 486/DX4/75 because they don't have compliant BIOSes. Many "green"
2172 desktop machines also don't have compliant BIOSes, and this driver
2173 may cause those machines to panic during the boot phase.
2175 Generally, if you don't have a battery in your machine, there isn't
2176 much point in using this driver and you should say N. If you get
2177 random kernel OOPSes or reboots that don't seem to be related to
2178 anything, try disabling/enabling this option (or disabling/enabling
2181 Some other things you should try when experiencing seemingly random,
2184 1) make sure that you have enough swap space and that it is
2186 2) pass the "no-hlt" option to the kernel
2187 3) switch on floating point emulation in the kernel and pass
2188 the "no387" option to the kernel
2189 4) pass the "floppy=nodma" option to the kernel
2190 5) pass the "mem=4M" option to the kernel (thereby disabling
2191 all but the first 4 MB of RAM)
2192 6) make sure that the CPU is not over clocked.
2193 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
2194 8) disable the cache from your BIOS settings
2195 9) install a fan for the video card or exchange video RAM
2196 10) install a better fan for the CPU
2197 11) exchange RAM chips
2198 12) exchange the motherboard.
2200 To compile this driver as a module, choose M here: the
2201 module will be called apm.
2205 config APM_IGNORE_USER_SUSPEND
2206 bool "Ignore USER SUSPEND"
2208 This option will ignore USER SUSPEND requests. On machines with a
2209 compliant APM BIOS, you want to say N. However, on the NEC Versa M
2210 series notebooks, it is necessary to say Y because of a BIOS bug.
2212 config APM_DO_ENABLE
2213 bool "Enable PM at boot time"
2215 Enable APM features at boot time. From page 36 of the APM BIOS
2216 specification: "When disabled, the APM BIOS does not automatically
2217 power manage devices, enter the Standby State, enter the Suspend
2218 State, or take power saving steps in response to CPU Idle calls."
2219 This driver will make CPU Idle calls when Linux is idle (unless this
2220 feature is turned off -- see "Do CPU IDLE calls", below). This
2221 should always save battery power, but more complicated APM features
2222 will be dependent on your BIOS implementation. You may need to turn
2223 this option off if your computer hangs at boot time when using APM
2224 support, or if it beeps continuously instead of suspending. Turn
2225 this off if you have a NEC UltraLite Versa 33/C or a Toshiba
2226 T400CDT. This is off by default since most machines do fine without
2231 bool "Make CPU Idle calls when idle"
2233 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
2234 On some machines, this can activate improved power savings, such as
2235 a slowed CPU clock rate, when the machine is idle. These idle calls
2236 are made after the idle loop has run for some length of time (e.g.,
2237 333 mS). On some machines, this will cause a hang at boot time or
2238 whenever the CPU becomes idle. (On machines with more than one CPU,
2239 this option does nothing.)
2241 config APM_DISPLAY_BLANK
2242 bool "Enable console blanking using APM"
2244 Enable console blanking using the APM. Some laptops can use this to
2245 turn off the LCD backlight when the screen blanker of the Linux
2246 virtual console blanks the screen. Note that this is only used by
2247 the virtual console screen blanker, and won't turn off the backlight
2248 when using the X Window system. This also doesn't have anything to
2249 do with your VESA-compliant power-saving monitor. Further, this
2250 option doesn't work for all laptops -- it might not turn off your
2251 backlight at all, or it might print a lot of errors to the console,
2252 especially if you are using gpm.
2254 config APM_ALLOW_INTS
2255 bool "Allow interrupts during APM BIOS calls"
2257 Normally we disable external interrupts while we are making calls to
2258 the APM BIOS as a measure to lessen the effects of a badly behaving
2259 BIOS implementation. The BIOS should reenable interrupts if it
2260 needs to. Unfortunately, some BIOSes do not -- especially those in
2261 many of the newer IBM Thinkpads. If you experience hangs when you
2262 suspend, try setting this to Y. Otherwise, say N.
2266 source "drivers/cpufreq/Kconfig"
2268 source "drivers/cpuidle/Kconfig"
2270 source "drivers/idle/Kconfig"
2275 menu "Bus options (PCI etc.)"
2281 Find out whether you have a PCI motherboard. PCI is the name of a
2282 bus system, i.e. the way the CPU talks to the other stuff inside
2283 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
2284 VESA. If you have PCI, say Y, otherwise N.
2287 prompt "PCI access mode"
2288 depends on X86_32 && PCI
2291 On PCI systems, the BIOS can be used to detect the PCI devices and
2292 determine their configuration. However, some old PCI motherboards
2293 have BIOS bugs and may crash if this is done. Also, some embedded
2294 PCI-based systems don't have any BIOS at all. Linux can also try to
2295 detect the PCI hardware directly without using the BIOS.
2297 With this option, you can specify how Linux should detect the
2298 PCI devices. If you choose "BIOS", the BIOS will be used,
2299 if you choose "Direct", the BIOS won't be used, and if you
2300 choose "MMConfig", then PCI Express MMCONFIG will be used.
2301 If you choose "Any", the kernel will try MMCONFIG, then the
2302 direct access method and falls back to the BIOS if that doesn't
2303 work. If unsure, go with the default, which is "Any".
2308 config PCI_GOMMCONFIG
2325 depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
2327 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
2330 depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC || PCI_GOMMCONFIG))
2334 depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY)
2338 depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
2342 depends on PCI && XEN
2350 bool "Support mmconfig PCI config space access"
2351 depends on X86_64 && PCI && ACPI
2353 config PCI_CNB20LE_QUIRK
2354 bool "Read CNB20LE Host Bridge Windows" if EXPERT
2357 Read the PCI windows out of the CNB20LE host bridge. This allows
2358 PCI hotplug to work on systems with the CNB20LE chipset which do
2361 There's no public spec for this chipset, and this functionality
2362 is known to be incomplete.
2364 You should say N unless you know you need this.
2366 source "drivers/pci/pcie/Kconfig"
2368 source "drivers/pci/Kconfig"
2370 # x86_64 have no ISA slots, but can have ISA-style DMA.
2372 bool "ISA-style DMA support" if (X86_64 && EXPERT)
2375 Enables ISA-style DMA support for devices requiring such controllers.
2383 Find out whether you have ISA slots on your motherboard. ISA is the
2384 name of a bus system, i.e. the way the CPU talks to the other stuff
2385 inside your box. Other bus systems are PCI, EISA, MicroChannel
2386 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
2387 newer boards don't support it. If you have ISA, say Y, otherwise N.
2393 The Extended Industry Standard Architecture (EISA) bus was
2394 developed as an open alternative to the IBM MicroChannel bus.
2396 The EISA bus provided some of the features of the IBM MicroChannel
2397 bus while maintaining backward compatibility with cards made for
2398 the older ISA bus. The EISA bus saw limited use between 1988 and
2399 1995 when it was made obsolete by the PCI bus.
2401 Say Y here if you are building a kernel for an EISA-based machine.
2405 source "drivers/eisa/Kconfig"
2408 tristate "NatSemi SCx200 support"
2410 This provides basic support for National Semiconductor's
2411 (now AMD's) Geode processors. The driver probes for the
2412 PCI-IDs of several on-chip devices, so its a good dependency
2413 for other scx200_* drivers.
2415 If compiled as a module, the driver is named scx200.
2417 config SCx200HR_TIMER
2418 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
2422 This driver provides a clocksource built upon the on-chip
2423 27MHz high-resolution timer. Its also a workaround for
2424 NSC Geode SC-1100's buggy TSC, which loses time when the
2425 processor goes idle (as is done by the scheduler). The
2426 other workaround is idle=poll boot option.
2429 bool "One Laptop Per Child support"
2436 Add support for detecting the unique features of the OLPC
2440 bool "OLPC XO-1 Power Management"
2441 depends on OLPC && MFD_CS5535 && PM_SLEEP
2444 Add support for poweroff and suspend of the OLPC XO-1 laptop.
2447 bool "OLPC XO-1 Real Time Clock"
2448 depends on OLPC_XO1_PM && RTC_DRV_CMOS
2450 Add support for the XO-1 real time clock, which can be used as a
2451 programmable wakeup source.
2454 bool "OLPC XO-1 SCI extras"
2455 depends on OLPC && OLPC_XO1_PM
2461 Add support for SCI-based features of the OLPC XO-1 laptop:
2462 - EC-driven system wakeups
2466 - AC adapter status updates
2467 - Battery status updates
2469 config OLPC_XO15_SCI
2470 bool "OLPC XO-1.5 SCI extras"
2471 depends on OLPC && ACPI
2474 Add support for SCI-based features of the OLPC XO-1.5 laptop:
2475 - EC-driven system wakeups
2476 - AC adapter status updates
2477 - Battery status updates
2480 bool "PCEngines ALIX System Support (LED setup)"
2483 This option enables system support for the PCEngines ALIX.
2484 At present this just sets up LEDs for GPIO control on
2485 ALIX2/3/6 boards. However, other system specific setup should
2488 Note: You must still enable the drivers for GPIO and LED support
2489 (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs
2491 Note: You have to set alix.force=1 for boards with Award BIOS.
2494 bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)"
2497 This option enables system support for the Soekris Engineering net5501.
2500 bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
2504 This option enables system support for the Traverse Technologies GEOS.
2507 bool "Technologic Systems TS-5500 platform support"
2509 select CHECK_SIGNATURE
2513 This option enables system support for the Technologic Systems TS-5500.
2519 depends on CPU_SUP_AMD && PCI
2521 source "drivers/pcmcia/Kconfig"
2523 source "drivers/pci/hotplug/Kconfig"
2526 tristate "RapidIO support"
2530 If enabled this option will include drivers and the core
2531 infrastructure code to support RapidIO interconnect devices.
2533 source "drivers/rapidio/Kconfig"
2536 bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
2538 Firmwares often provide initial graphics framebuffers so the BIOS,
2539 bootloader or kernel can show basic video-output during boot for
2540 user-guidance and debugging. Historically, x86 used the VESA BIOS
2541 Extensions and EFI-framebuffers for this, which are mostly limited
2543 This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
2544 framebuffers so the new generic system-framebuffer drivers can be
2545 used on x86. If the framebuffer is not compatible with the generic
2546 modes, it is adverticed as fallback platform framebuffer so legacy
2547 drivers like efifb, vesafb and uvesafb can pick it up.
2548 If this option is not selected, all system framebuffers are always
2549 marked as fallback platform framebuffers as usual.
2551 Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will
2552 not be able to pick up generic system framebuffers if this option
2553 is selected. You are highly encouraged to enable simplefb as
2554 replacement if you select this option. simplefb can correctly deal
2555 with generic system framebuffers. But you should still keep vesafb
2556 and others enabled as fallback if a system framebuffer is
2557 incompatible with simplefb.
2564 menu "Executable file formats / Emulations"
2566 source "fs/Kconfig.binfmt"
2568 config IA32_EMULATION
2569 bool "IA32 Emulation"
2572 select COMPAT_BINFMT_ELF
2573 select ARCH_WANT_OLD_COMPAT_IPC
2575 Include code to run legacy 32-bit programs under a
2576 64-bit kernel. You should likely turn this on, unless you're
2577 100% sure that you don't have any 32-bit programs left.
2580 tristate "IA32 a.out support"
2581 depends on IA32_EMULATION
2583 Support old a.out binaries in the 32bit emulation.
2586 bool "x32 ABI for 64-bit mode"
2589 Include code to run binaries for the x32 native 32-bit ABI
2590 for 64-bit processors. An x32 process gets access to the
2591 full 64-bit register file and wide data path while leaving
2592 pointers at 32 bits for smaller memory footprint.
2594 You will need a recent binutils (2.22 or later) with
2595 elf32_x86_64 support enabled to compile a kernel with this
2600 depends on IA32_EMULATION || X86_X32
2603 config COMPAT_FOR_U64_ALIGNMENT
2606 config SYSVIPC_COMPAT
2618 config HAVE_ATOMIC_IOMAP
2622 config X86_DEV_DMA_OPS
2624 depends on X86_64 || STA2X11
2626 config X86_DMA_REMAP
2634 source "net/Kconfig"
2636 source "drivers/Kconfig"
2638 source "drivers/firmware/Kconfig"
2642 source "arch/x86/Kconfig.debug"
2644 source "security/Kconfig"
2646 source "crypto/Kconfig"
2648 source "arch/x86/kvm/Kconfig"
2650 source "lib/Kconfig"