1 # Copyright (C) 2006-2014 OpenWrt.org
3 # This is free software, licensed under the GNU General Public License v2.
4 # See /LICENSE for more information.
8 bool "Enable support for printk"
11 config KERNEL_CRASHLOG
13 depends on !(arm || powerpc || sparc || TARGET_uml)
17 bool "Support for paging of anonymous memory (swap)"
20 config KERNEL_DEBUG_FS
21 bool "Compile the kernel with debug filesystem enabled"
24 debugfs is a virtual file system that kernel developers use to put
25 debugging files into. Enable this option to be able to read and
26 write to these files. Many common debugging facilities, such as
27 ftrace, require the existence of debugfs.
29 config KERNEL_PERF_EVENTS
33 config KERNEL_PROFILING
34 bool "Compile the kernel with profiling enabled"
36 select KERNEL_PERF_EVENTS
38 Enable the extended profiling support mechanisms used by profilers such
41 config KERNEL_KALLSYMS
42 bool "Compile the kernel with symbol table information"
45 This will give you more information in stack traces from kernel oopses.
48 bool "Compile the kernel with tracing support"
49 depends on !TARGET_uml
52 config KERNEL_FTRACE_SYSCALLS
53 bool "Trace system calls"
54 depends on KERNEL_FTRACE
57 config KERNEL_ENABLE_DEFAULT_TRACERS
58 bool "Trace process context switches and events"
59 depends on KERNEL_FTRACE
62 config KERNEL_DEBUG_KERNEL
66 config KERNEL_DEBUG_INFO
67 bool "Compile the kernel with debug information"
69 select KERNEL_DEBUG_KERNEL
71 This will compile your kernel and modules with debug information.
73 config KERNEL_DEBUG_LL_UART_NONE
78 config KERNEL_DEBUG_LL
82 select KERNEL_DEBUG_LL_UART_NONE
84 ARM low level debugging.
86 config KERNEL_DYNAMIC_DEBUG
87 bool "Compile the kernel with dynamic printk"
88 select KERNEL_DEBUG_FS
91 Compiles debug level messages into the kernel, which would not
92 otherwise be available at runtime. These messages can then be
93 enabled/disabled based on various levels of scope - per source file,
94 function, module, format string, and line number. This mechanism
95 implicitly compiles in all pr_debug() and dev_dbg() calls, which
96 enlarges the kernel text size by about 2%.
98 config KERNEL_EARLY_PRINTK
99 bool "Compile the kernel with early printk"
100 default y if TARGET_bcm53xx
103 select KERNEL_DEBUG_KERNEL
104 select KERNEL_DEBUG_LL if arm
106 Compile the kernel with early printk support. This is only useful for
107 debugging purposes to send messages over the serial console in early boot.
108 Enable this to debug early boot problems.
111 bool "Compile the kernel with asynchronous IO support"
114 config KERNEL_DIRECT_IO
115 bool "Compile the kernel with direct IO support"
118 config KERNEL_MAGIC_SYSRQ
119 bool "Compile the kernel with SysRq support"
122 config KERNEL_COREDUMP
125 config KERNEL_ELF_CORE
126 bool "Enable process core dump support"
127 select KERNEL_COREDUMP
130 config KERNEL_PROVE_LOCKING
131 bool "Enable kernel lock checking"
132 select KERNEL_DEBUG_KERNEL
135 config KERNEL_PRINTK_TIME
136 bool "Enable printk timestamps"
139 config KERNEL_SLUB_DEBUG
142 config KERNEL_SLUB_DEBUG_ON
145 config KERNEL_SLABINFO
146 select KERNEL_SLUB_DEBUG
147 select KERNEL_SLUB_DEBUG_ON
148 bool "Enable /proc slab debug info"
150 config KERNEL_PROC_PAGE_MONITOR
151 bool "Enable /proc page monitoring"
157 bool "Enable kexec support"
160 bool "Enable rfkill support"
161 default RFKILL_SUPPORT
164 bool "Enable sparse check during kernel build"
168 # CGROUP support symbols
171 config KERNEL_CGROUPS
172 bool "Enable kernel cgroups"
177 config KERNEL_CGROUP_DEBUG
178 bool "Example debug cgroup subsystem"
181 This option enables a simple cgroup subsystem that
182 exports useful debugging information about the cgroups
185 config KERNEL_FREEZER
187 default y if KERNEL_CGROUP_FREEZER
189 config KERNEL_CGROUP_FREEZER
190 bool "Freezer cgroup subsystem"
193 Provides a way to freeze and unfreeze all tasks in a
196 config KERNEL_CGROUP_DEVICE
197 bool "Device controller for cgroups"
200 Provides a cgroup implementing whitelists for devices which
201 a process in the cgroup can mknod or open.
203 config KERNEL_CPUSETS
204 bool "Cpuset support"
207 This option will let you create and manage CPUSETs which
208 allow dynamically partitioning a system into sets of CPUs and
209 Memory Nodes and assigning tasks to run only within those sets.
210 This is primarily useful on large SMP or NUMA systems.
212 config KERNEL_PROC_PID_CPUSET
213 bool "Include legacy /proc/<pid>/cpuset file"
215 depends on KERNEL_CPUSETS
217 config KERNEL_CGROUP_CPUACCT
218 bool "Simple CPU accounting cgroup subsystem"
221 Provides a simple Resource Controller for monitoring the
222 total CPU consumed by the tasks in a cgroup.
224 config KERNEL_RESOURCE_COUNTERS
225 bool "Resource counters"
228 This option enables controller independent resource accounting
229 infrastructure that works with cgroups.
231 config KERNEL_MM_OWNER
233 default y if KERNEL_MEMCG
236 bool "Memory Resource Controller for Control Groups"
238 depends on KERNEL_RESOURCE_COUNTERS
240 Provides a memory resource controller that manages both anonymous
241 memory and page cache. (See Documentation/cgroups/memory.txt)
243 Note that setting this option increases fixed memory overhead
244 associated with each page of memory in the system. By this,
245 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
246 usage tracking struct at boot. Total amount of this is printed out
249 Only enable when you're ok with these tradeoffs and really
250 sure you need the memory resource controller. Even when you enable
251 this, you can set "cgroup_disable=memory" at your boot option to
252 disable memory resource controller and you can avoid overheads
253 (but lose benefits of memory resource controller).
255 This config option also selects MM_OWNER config option, which
256 could in turn add some fork/exit overhead.
258 config KERNEL_MEMCG_SWAP
259 bool "Memory Resource Controller Swap Extension"
261 depends on KERNEL_MEMCG
263 Add swap management feature to memory resource controller. When you
264 enable this, you can limit mem+swap usage per cgroup. In other words,
265 when you disable this, memory resource controller has no cares to
266 usage of swap...a process can exhaust all of the swap. This extension
267 is useful when you want to avoid exhaustion swap but this itself
268 adds more overheads and consumes memory for remembering information.
269 Especially if you use 32bit system or small memory system, please
270 be careful about enabling this. When memory resource controller
271 is disabled by boot option, this will be automatically disabled and
272 there will be no overhead from this. Even when you set this config=y,
273 if boot option "swapaccount=0" is set, swap will not be accounted.
274 Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
275 size is 4096bytes, 512k per 1Gbytes of swap.
277 config KERNEL_MEMCG_SWAP_ENABLED
278 bool "Memory Resource Controller Swap Extension enabled by default"
280 depends on KERNEL_MEMCG_SWAP
282 Memory Resource Controller Swap Extension comes with its price in
283 a bigger memory consumption. General purpose distribution kernels
284 which want to enable the feature but keep it disabled by default
285 and let the user enable it by swapaccount boot command line
286 parameter should have this option unselected.
288 Those who want to have the feature enabled by default should
289 select this option (if, for some reason, they need to disable it,
290 then swapaccount=0 does the trick).
293 config KERNEL_MEMCG_KMEM
294 bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)"
296 depends on KERNEL_MEMCG
298 The Kernel Memory extension for Memory Resource Controller can limit
299 the amount of memory used by kernel objects in the system. Those are
300 fundamentally different from the entities handled by the standard
301 Memory Controller, which are page-based, and can be swapped. Users of
302 the kmem extension can use it to guarantee that no group of processes
303 will ever exhaust kernel resources alone.
305 config KERNEL_CGROUP_PERF
306 bool "Enable perf_event per-cpu per-container group (cgroup) monitoring"
307 select KERNEL_PERF_EVENTS
310 This option extends the per-cpu mode to restrict monitoring to
311 threads which belong to the cgroup specified and run on the
314 menuconfig KERNEL_CGROUP_SCHED
315 bool "Group CPU scheduler"
318 This feature lets CPU scheduler recognize task groups and control CPU
319 bandwidth allocation to such task groups. It uses cgroups to group
322 if KERNEL_CGROUP_SCHED
324 config KERNEL_FAIR_GROUP_SCHED
325 bool "Group scheduling for SCHED_OTHER"
328 config KERNEL_CFS_BANDWIDTH
329 bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
331 depends on KERNEL_FAIR_GROUP_SCHED
333 This option allows users to define CPU bandwidth rates (limits) for
334 tasks running within the fair group scheduler. Groups with no limit
335 set are considered to be unconstrained and will run with no
337 See tip/Documentation/scheduler/sched-bwc.txt for more information.
339 config KERNEL_RT_GROUP_SCHED
340 bool "Group scheduling for SCHED_RR/FIFO"
343 This feature lets you explicitly allocate real CPU bandwidth
344 to task groups. If enabled, it will also make it impossible to
345 schedule realtime tasks for non-root users until you allocate
346 realtime bandwidth for them.
350 config KERNEL_BLK_CGROUP
351 bool "Block IO controller"
354 Generic block IO controller cgroup interface. This is the common
355 cgroup interface which should be used by various IO controlling
358 Currently, CFQ IO scheduler uses it to recognize task groups and
359 control disk bandwidth allocation (proportional time slice allocation)
360 to such task groups. It is also used by bio throttling logic in
361 block layer to implement upper limit in IO rates on a device.
363 This option only enables generic Block IO controller infrastructure.
364 One needs to also enable actual IO controlling logic/policy. For
365 enabling proportional weight division of disk bandwidth in CFQ, set
366 CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
367 CONFIG_BLK_DEV_THROTTLING=y.
369 config KERNEL_DEBUG_BLK_CGROUP
370 bool "Enable Block IO controller debugging"
372 depends on KERNEL_BLK_CGROUP
374 Enable some debugging help. Currently it exports additional stat
375 files in a cgroup which can be useful for debugging.
377 config KERNEL_NET_CLS_CGROUP
378 bool "Control Group Classifier"
381 config KERNEL_NETPRIO_CGROUP
382 bool "Network priority cgroup"
388 # Namespace support symbols
391 config KERNEL_NAMESPACES
392 bool "Enable kernel namespaces"
401 In this namespace, tasks see different info provided
402 with the uname() system call.
408 In this namespace, tasks work with IPC ids which correspond to
409 different IPC objects in different namespaces.
411 config KERNEL_USER_NS
412 bool "User namespace (EXPERIMENTAL)"
415 This allows containers, i.e. vservers, to use user namespaces
416 to provide different user info for different servers.
419 bool "PID Namespaces"
422 Support process id namespaces. This allows having multiple
423 processes with the same pid as long as they are in different
424 pid namespaces. This is a building block of containers.
427 bool "Network namespace"
430 Allow user space to create what appear to be multiple instances
431 of the network stack.
436 # LXC related symbols
439 config KERNEL_LXC_MISC
440 bool "Enable miscellaneous LXC related options"
445 config KERNEL_DEVPTS_MULTIPLE_INSTANCES
446 bool "Support multiple instances of devpts"
449 Enable support for multiple instances of devpts filesystem.
450 If you want to have isolated PTY namespaces (eg: in containers),
451 say Y here. Otherwise, say N. If enabled, each mount of devpts
452 filesystem with the '-o newinstance' option will create an
453 independent PTY namespace.
455 config KERNEL_POSIX_MQUEUE
456 bool "POSIX Message Queues"
459 POSIX variant of message queues is a part of IPC. In POSIX message
460 queues every message has a priority which decides about succession
461 of receiving it by a process. If you want to compile and run
462 programs written e.g. for Solaris with use of its POSIX message
463 queues (functions mq_*) say Y here.
465 POSIX message queues are visible as a filesystem called 'mqueue'
466 and can be mounted somewhere if you want to do filesystem
467 operations on message queues.
471 config KERNEL_SECCOMP
472 bool "Enable seccomp support"
473 depends on !(TARGET_uml || TARGET_avr32)
476 Build kernel with support for seccomp.
478 config KERNEL_SECCOMP_FILTER
479 bool "Enable seccomp filter support"
480 depends on KERNEL_SECCOMP
483 Build kernel with support for seccomp BPF programs.