[VectorUtils] Replace 'llvm::' qualification with 'using llvm'

[oota-llvm.git] / docs / LangRef.rst

==============================
LLVM Language Reference Manual
==============================

.. contents::
   :local:
   :depth: 4

Abstract
========

This document is a reference manual for the LLVM assembly language. LLVM
is a Static Single Assignment (SSA) based representation that provides
type safety, low-level operations, flexibility, and the capability of
representing 'all' high-level languages cleanly. It is the common code
representation used throughout all phases of the LLVM compilation
strategy.

Introduction
============

The LLVM code representation is designed to be used in three different
forms: as an in-memory compiler IR, as an on-disk bitcode representation
(suitable for fast loading by a Just-In-Time compiler), and as a human
readable assembly language representation. This allows LLVM to provide a
powerful intermediate representation for efficient compiler
transformations and analysis, while providing a natural means to debug
and visualize the transformations. The three different forms of LLVM are
all equivalent. This document describes the human readable
representation and notation.

The LLVM representation aims to be light-weight and low-level while
being expressive, typed, and extensible at the same time. It aims to be
a "universal IR" of sorts, by being at a low enough level that
high-level ideas may be cleanly mapped to it (similar to how
microprocessors are "universal IR's", allowing many source languages to
be mapped to them). By providing type information, LLVM can be used as
the target of optimizations: for example, through pointer analysis, it
can be proven that a C automatic variable is never accessed outside of
the current function, allowing it to be promoted to a simple SSA value
instead of a memory location.

.. _wellformed:

Well-Formedness
---------------

It is important to note that this document describes 'well formed' LLVM
assembly language. There is a difference between what the parser accepts
and what is considered 'well formed'. For example, the following
instruction is syntactically okay, but not well formed:

.. code-block:: llvm

    %x = add i32 1, %x

because the definition of ``%x`` does not dominate all of its uses. The
LLVM infrastructure provides a verification pass that may be used to
verify that an LLVM module is well formed. This pass is automatically
run by the parser after parsing input assembly and by the optimizer
before it outputs bitcode. The violations pointed out by the verifier
pass indicate bugs in transformation passes or input to the parser.

.. _identifiers:

Identifiers
===========

LLVM identifiers come in two basic types: global and local. Global
identifiers (functions, global variables) begin with the ``'@'``
character. Local identifiers (register names, types) begin with the
``'%'`` character. Additionally, there are three different formats for
identifiers, for different purposes:

#. Named values are represented as a string of characters with their
   prefix. For example, ``%foo``, ``@DivisionByZero``,
   ``%a.really.long.identifier``. The actual regular expression used is
   '``[%@][-a-zA-Z$._][-a-zA-Z$._0-9]*``'. Identifiers that require other
   characters in their names can be surrounded with quotes. Special
   characters may be escaped using ``"\xx"`` where ``xx`` is the ASCII
   code for the character in hexadecimal. In this way, any character can
   be used in a name value, even quotes themselves. The ``"\01"`` prefix
   can be used on global variables to suppress mangling.
#. Unnamed values are represented as an unsigned numeric value with
   their prefix. For example, ``%12``, ``@2``, ``%44``.
#. Constants, which are described in the section Constants_ below.

LLVM requires that values start with a prefix for two reasons: Compilers
don't need to worry about name clashes with reserved words, and the set
of reserved words may be expanded in the future without penalty.
Additionally, unnamed identifiers allow a compiler to quickly come up
with a temporary variable without having to avoid symbol table
conflicts.

Reserved words in LLVM are very similar to reserved words in other
languages. There are keywords for different opcodes ('``add``',
'``bitcast``', '``ret``', etc...), for primitive type names ('``void``',
'``i32``', etc...), and others. These reserved words cannot conflict
with variable names, because none of them start with a prefix character
(``'%'`` or ``'@'``).

Here is an example of LLVM code to multiply the integer variable
'``%X``' by 8:

The easy way:

.. code-block:: llvm

    %result = mul i32 %X, 8

After strength reduction:

.. code-block:: llvm

    %result = shl i32 %X, 3

And the hard way:

.. code-block:: llvm

    %0 = add i32 %X, %X           ; yields i32:%0
    %1 = add i32 %0, %0           ; yields i32:%1
    %result = add i32 %1, %1

This last way of multiplying ``%X`` by 8 illustrates several important
lexical features of LLVM:

#. Comments are delimited with a '``;``' and go until the end of line.
#. Unnamed temporaries are created when the result of a computation is
   not assigned to a named value.
#. Unnamed temporaries are numbered sequentially (using a per-function
   incrementing counter, starting with 0). Note that basic blocks and unnamed
   function parameters are included in this numbering. For example, if the
   entry basic block is not given a label name and all function parameters are
   named, then it will get number 0.

It also shows a convention that we follow in this document. When
demonstrating instructions, we will follow an instruction with a comment
that defines the type and name of value produced.

High Level Structure
====================

Module Structure
----------------

LLVM programs are composed of ``Module``'s, each of which is a
translation unit of the input programs. Each module consists of
functions, global variables, and symbol table entries. Modules may be
combined together with the LLVM linker, which merges function (and
global variable) definitions, resolves forward declarations, and merges
symbol table entries. Here is an example of the "hello world" module:

.. code-block:: llvm

    ; Declare the string constant as a global constant.
    @.str = private unnamed_addr constant [13 x i8] c"hello world\0A\00"

    ; External declaration of the puts function
    declare i32 @puts(i8* nocapture) nounwind

    ; Definition of main function
    define i32 @main() {   ; i32()*
      ; Convert [13 x i8]* to i8  *...
      %cast210 = getelementptr [13 x i8], [13 x i8]* @.str, i64 0, i64 0

      ; Call puts function to write out the string to stdout.
      call i32 @puts(i8* %cast210)
      ret i32 0
    }

    ; Named metadata
    !0 = !{i32 42, null, !"string"}
    !foo = !{!0}

This example is made up of a :ref:`global variable <globalvars>` named
"``.str``", an external declaration of the "``puts``" function, a
:ref:`function definition <functionstructure>` for "``main``" and
:ref:`named metadata <namedmetadatastructure>` "``foo``".

In general, a module is made up of a list of global values (where both
functions and global variables are global values). Global values are
represented by a pointer to a memory location (in this case, a pointer
to an array of char, and a pointer to a function), and have one of the
following :ref:`linkage types <linkage>`.

.. _linkage:

Linkage Types
-------------

All Global Variables and Functions have one of the following types of
linkage:

``private``
    Global values with "``private``" linkage are only directly
    accessible by objects in the current module. In particular, linking
    code into a module with an private global value may cause the
    private to be renamed as necessary to avoid collisions. Because the
    symbol is private to the module, all references can be updated. This
    doesn't show up in any symbol table in the object file.
``internal``
    Similar to private, but the value shows as a local symbol
    (``STB_LOCAL`` in the case of ELF) in the object file. This
    corresponds to the notion of the '``static``' keyword in C.
``available_externally``
    Globals with "``available_externally``" linkage are never emitted
    into the object file corresponding to the LLVM module. They exist to
    allow inlining and other optimizations to take place given knowledge
    of the definition of the global, which is known to be somewhere
    outside the module. Globals with ``available_externally`` linkage
    are allowed to be discarded at will, and are otherwise the same as
    ``linkonce_odr``. This linkage type is only allowed on definitions,
    not declarations.
``linkonce``
    Globals with "``linkonce``" linkage are merged with other globals of
    the same name when linkage occurs. This can be used to implement
    some forms of inline functions, templates, or other code which must
    be generated in each translation unit that uses it, but where the
    body may be overridden with a more definitive definition later.
    Unreferenced ``linkonce`` globals are allowed to be discarded. Note
    that ``linkonce`` linkage does not actually allow the optimizer to
    inline the body of this function into callers because it doesn't
    know if this definition of the function is the definitive definition
    within the program or whether it will be overridden by a stronger
    definition. To enable inlining and other optimizations, use
    "``linkonce_odr``" linkage.
``weak``
    "``weak``" linkage has the same merging semantics as ``linkonce``
    linkage, except that unreferenced globals with ``weak`` linkage may
    not be discarded. This is used for globals that are declared "weak"
    in C source code.
``common``
    "``common``" linkage is most similar to "``weak``" linkage, but they
    are used for tentative definitions in C, such as "``int X;``" at
    global scope. Symbols with "``common``" linkage are merged in the
    same way as ``weak symbols``, and they may not be deleted if
    unreferenced. ``common`` symbols may not have an explicit section,
    must have a zero initializer, and may not be marked
    ':ref:`constant <globalvars>`'. Functions and aliases may not have
    common linkage.

.. _linkage_appending:

``appending``
    "``appending``" linkage may only be applied to global variables of
    pointer to array type. When two global variables with appending
    linkage are linked together, the two global arrays are appended
    together. This is the LLVM, typesafe, equivalent of having the
    system linker append together "sections" with identical names when
    .o files are linked.
``extern_weak``
    The semantics of this linkage follow the ELF object file model: the
    symbol is weak until linked, if not linked, the symbol becomes null
    instead of being an undefined reference.
``linkonce_odr``, ``weak_odr``
    Some languages allow differing globals to be merged, such as two
    functions with different semantics. Other languages, such as
    ``C++``, ensure that only equivalent globals are ever merged (the
    "one definition rule" --- "ODR"). Such languages can use the
    ``linkonce_odr`` and ``weak_odr`` linkage types to indicate that the
    global will only be merged with equivalent globals. These linkage
    types are otherwise the same as their non-``odr`` versions.
``external``
    If none of the above identifiers are used, the global is externally
    visible, meaning that it participates in linkage and can be used to
    resolve external symbol references.

It is illegal for a function *declaration* to have any linkage type
other than ``external`` or ``extern_weak``.

.. _callingconv:

Calling Conventions
-------------------

LLVM :ref:`functions <functionstructure>`, :ref:`calls <i_call>` and
:ref:`invokes <i_invoke>` can all have an optional calling convention
specified for the call. The calling convention of any pair of dynamic
caller/callee must match, or the behavior of the program is undefined.
The following calling conventions are supported by LLVM, and more may be
added in the future:

"``ccc``" - The C calling convention
    This calling convention (the default if no other calling convention
    is specified) matches the target C calling conventions. This calling
    convention supports varargs function calls and tolerates some
    mismatch in the declared prototype and implemented declaration of
    the function (as does normal C).
"``fastcc``" - The fast calling convention
    This calling convention attempts to make calls as fast as possible
    (e.g. by passing things in registers). This calling convention
    allows the target to use whatever tricks it wants to produce fast
    code for the target, without having to conform to an externally
    specified ABI (Application Binary Interface). `Tail calls can only
    be optimized when this, the GHC or the HiPE convention is
    used. <CodeGenerator.html#id80>`_ This calling convention does not
    support varargs and requires the prototype of all callees to exactly
    match the prototype of the function definition.
"``coldcc``" - The cold calling convention
    This calling convention attempts to make code in the caller as
    efficient as possible under the assumption that the call is not
    commonly executed. As such, these calls often preserve all registers
    so that the call does not break any live ranges in the caller side.
    This calling convention does not support varargs and requires the
    prototype of all callees to exactly match the prototype of the
    function definition. Furthermore the inliner doesn't consider such function
    calls for inlining.
"``cc 10``" - GHC convention
    This calling convention has been implemented specifically for use by
    the `Glasgow Haskell Compiler (GHC) <http://www.haskell.org/ghc>`_.
    It passes everything in registers, going to extremes to achieve this
    by disabling callee save registers. This calling convention should
    not be used lightly but only for specific situations such as an
    alternative to the *register pinning* performance technique often
    used when implementing functional programming languages. At the
    moment only X86 supports this convention and it has the following
    limitations:

    -  On *X86-32* only supports up to 4 bit type parameters. No
       floating point types are supported.
    -  On *X86-64* only supports up to 10 bit type parameters and 6
       floating point parameters.

    This calling convention supports `tail call
    optimization <CodeGenerator.html#id80>`_ but requires both the
    caller and callee are using it.
"``cc 11``" - The HiPE calling convention
    This calling convention has been implemented specifically for use by
    the `High-Performance Erlang
    (HiPE) <http://www.it.uu.se/research/group/hipe/>`_ compiler, *the*
    native code compiler of the `Ericsson's Open Source Erlang/OTP
    system <http://www.erlang.org/download.shtml>`_. It uses more
    registers for argument passing than the ordinary C calling
    convention and defines no callee-saved registers. The calling
    convention properly supports `tail call
    optimization <CodeGenerator.html#id80>`_ but requires that both the
    caller and the callee use it. It uses a *register pinning*
    mechanism, similar to GHC's convention, for keeping frequently
    accessed runtime components pinned to specific hardware registers.
    At the moment only X86 supports this convention (both 32 and 64
    bit).
"``webkit_jscc``" - WebKit's JavaScript calling convention
    This calling convention has been implemented for `WebKit FTL JIT
    <https://trac.webkit.org/wiki/FTLJIT>`_. It passes arguments on the
    stack right to left (as cdecl does), and returns a value in the
    platform's customary return register.
"``anyregcc``" - Dynamic calling convention for code patching
    This is a special convention that supports patching an arbitrary code
    sequence in place of a call site. This convention forces the call
    arguments into registers but allows them to be dynamically
    allocated. This can currently only be used with calls to
    llvm.experimental.patchpoint because only this intrinsic records
    the location of its arguments in a side table. See :doc:`StackMaps`.
"``preserve_mostcc``" - The `PreserveMost` calling convention
    This calling convention attempts to make the code in the caller as
    unintrusive as possible. This convention behaves identically to the `C`
    calling convention on how arguments and return values are passed, but it
    uses a different set of caller/callee-saved registers. This alleviates the
    burden of saving and recovering a large register set before and after the
    call in the caller. If the arguments are passed in callee-saved registers,
    then they will be preserved by the callee across the call. This doesn't
    apply for values returned in callee-saved registers.

    - On X86-64 the callee preserves all general purpose registers, except for
      R11. R11 can be used as a scratch register. Floating-point registers
      (XMMs/YMMs) are not preserved and need to be saved by the caller.

    The idea behind this convention is to support calls to runtime functions
    that have a hot path and a cold path. The hot path is usually a small piece
    of code that doesn't use many registers. The cold path might need to call out to
    another function and therefore only needs to preserve the caller-saved
    registers, which haven't already been saved by the caller. The
    `PreserveMost` calling convention is very similar to the `cold` calling
    convention in terms of caller/callee-saved registers, but they are used for
    different types of function calls. `coldcc` is for function calls that are
    rarely executed, whereas `preserve_mostcc` function calls are intended to be
    on the hot path and definitely executed a lot. Furthermore `preserve_mostcc`
    doesn't prevent the inliner from inlining the function call.

    This calling convention will be used by a future version of the ObjectiveC
    runtime and should therefore still be considered experimental at this time.
    Although this convention was created to optimize certain runtime calls to
    the ObjectiveC runtime, it is not limited to this runtime and might be used
    by other runtimes in the future too. The current implementation only
    supports X86-64, but the intention is to support more architectures in the
    future.
"``preserve_allcc``" - The `PreserveAll` calling convention
    This calling convention attempts to make the code in the caller even less
    intrusive than the `PreserveMost` calling convention. This calling
    convention also behaves identical to the `C` calling convention on how
    arguments and return values are passed, but it uses a different set of
    caller/callee-saved registers. This removes the burden of saving and
    recovering a large register set before and after the call in the caller. If
    the arguments are passed in callee-saved registers, then they will be
    preserved by the callee across the call. This doesn't apply for values
    returned in callee-saved registers.

    - On X86-64 the callee preserves all general purpose registers, except for
      R11. R11 can be used as a scratch register. Furthermore it also preserves
      all floating-point registers (XMMs/YMMs).

    The idea behind this convention is to support calls to runtime functions
    that don't need to call out to any other functions.

    This calling convention, like the `PreserveMost` calling convention, will be
    used by a future version of the ObjectiveC runtime and should be considered
    experimental at this time.
"``cc <n>``" - Numbered convention
    Any calling convention may be specified by number, allowing
    target-specific calling conventions to be used. Target specific
    calling conventions start at 64.

More calling conventions can be added/defined on an as-needed basis, to
support Pascal conventions or any other well-known target-independent
convention.

.. _visibilitystyles:

Visibility Styles
-----------------

All Global Variables and Functions have one of the following visibility
styles:

"``default``" - Default style
    On targets that use the ELF object file format, default visibility
    means that the declaration is visible to other modules and, in
    shared libraries, means that the declared entity may be overridden.
    On Darwin, default visibility means that the declaration is visible
    to other modules. Default visibility corresponds to "external
    linkage" in the language.
"``hidden``" - Hidden style
    Two declarations of an object with hidden visibility refer to the
    same object if they are in the same shared object. Usually, hidden
    visibility indicates that the symbol will not be placed into the
    dynamic symbol table, so no other module (executable or shared
    library) can reference it directly.
"``protected``" - Protected style
    On ELF, protected visibility indicates that the symbol will be
    placed in the dynamic symbol table, but that references within the
    defining module will bind to the local symbol. That is, the symbol
    cannot be overridden by another module.

A symbol with ``internal`` or ``private`` linkage must have ``default``
visibility.

.. _dllstorageclass:

DLL Storage Classes
-------------------

All Global Variables, Functions and Aliases can have one of the following
DLL storage class:

``dllimport``
    "``dllimport``" causes the compiler to reference a function or variable via
    a global pointer to a pointer that is set up by the DLL exporting the
    symbol. On Microsoft Windows targets, the pointer name is formed by
    combining ``__imp_`` and the function or variable name.
``dllexport``
    "``dllexport``" causes the compiler to provide a global pointer to a pointer
    in a DLL, so that it can be referenced with the ``dllimport`` attribute. On
    Microsoft Windows targets, the pointer name is formed by combining
    ``__imp_`` and the function or variable name. Since this storage class
    exists for defining a dll interface, the compiler, assembler and linker know
    it is externally referenced and must refrain from deleting the symbol.

.. _tls_model:

Thread Local Storage Models
---------------------------

A variable may be defined as ``thread_local``, which means that it will
not be shared by threads (each thread will have a separated copy of the
variable). Not all targets support thread-local variables. Optionally, a
TLS model may be specified:

``localdynamic``
    For variables that are only used within the current shared library.
``initialexec``
    For variables in modules that will not be loaded dynamically.
``localexec``
    For variables defined in the executable and only used within it.

If no explicit model is given, the "general dynamic" model is used.

The models correspond to the ELF TLS models; see `ELF Handling For
Thread-Local Storage <http://people.redhat.com/drepper/tls.pdf>`_ for
more information on under which circumstances the different models may
be used. The target may choose a different TLS model if the specified
model is not supported, or if a better choice of model can be made.

A model can also be specified in an alias, but then it only governs how
the alias is accessed. It will not have any effect in the aliasee.

For platforms without linker support of ELF TLS model, the -femulated-tls
flag can be used to generate GCC compatible emulated TLS code.

.. _namedtypes:

Structure Types
---------------

LLVM IR allows you to specify both "identified" and "literal" :ref:`structure
types <t_struct>`. Literal types are uniqued structurally, but identified types
are never uniqued. An :ref:`opaque structural type <t_opaque>` can also be used
to forward declare a type that is not yet available.

An example of an identified structure specification is:

.. code-block:: llvm

    %mytype = type { %mytype*, i32 }

Prior to the LLVM 3.0 release, identified types were structurally uniqued. Only
literal types are uniqued in recent versions of LLVM.

.. _globalvars:

Global Variables
----------------

Global variables define regions of memory allocated at compilation time
instead of run-time.

Global variable definitions must be initialized.

Global variables in other translation units can also be declared, in which
case they don't have an initializer.

Either global variable definitions or declarations may have an explicit section
to be placed in and may have an optional explicit alignment specified.

A variable may be defined as a global ``constant``, which indicates that
the contents of the variable will **never** be modified (enabling better
optimization, allowing the global data to be placed in the read-only
section of an executable, etc). Note that variables that need runtime
initialization cannot be marked ``constant`` as there is a store to the
variable.

LLVM explicitly allows *declarations* of global variables to be marked
constant, even if the final definition of the global is not. This
capability can be used to enable slightly better optimization of the
program, but requires the language definition to guarantee that
optimizations based on the 'constantness' are valid for the translation
units that do not include the definition.

As SSA values, global variables define pointer values that are in scope
(i.e. they dominate) all basic blocks in the program. Global variables
always define a pointer to their "content" type because they describe a
region of memory, and all memory objects in LLVM are accessed through
pointers.

Global variables can be marked with ``unnamed_addr`` which indicates
that the address is not significant, only the content. Constants marked
like this can be merged with other constants if they have the same
initializer. Note that a constant with significant address *can* be
merged with a ``unnamed_addr`` constant, the result being a constant
whose address is significant.

A global variable may be declared to reside in a target-specific
numbered address space. For targets that support them, address spaces
may affect how optimizations are performed and/or what target
instructions are used to access the variable. The default address space
is zero. The address space qualifier must precede any other attributes.

LLVM allows an explicit section to be specified for globals. If the
target supports it, it will emit globals to the section specified.
Additionally, the global can placed in a comdat if the target has the necessary
support.

By default, global initializers are optimized by assuming that global
variables defined within the module are not modified from their
initial values before the start of the global initializer. This is
true even for variables potentially accessible from outside the
module, including those with external linkage or appearing in
``@llvm.used`` or dllexported variables. This assumption may be suppressed
by marking the variable with ``externally_initialized``.

An explicit alignment may be specified for a global, which must be a
power of 2. If not present, or if the alignment is set to zero, the
alignment of the global is set by the target to whatever it feels
convenient. If an explicit alignment is specified, the global is forced
to have exactly that alignment. Targets and optimizers are not allowed
to over-align the global if the global has an assigned section. In this
case, the extra alignment could be observable: for example, code could
assume that the globals are densely packed in their section and try to
iterate over them as an array, alignment padding would break this
iteration. The maximum alignment is ``1 << 29``.

Globals can also have a :ref:`DLL storage class <dllstorageclass>`.

Variables and aliases can have a
:ref:`Thread Local Storage Model <tls_model>`.

Syntax::

    [@<GlobalVarName> =] [Linkage] [Visibility] [DLLStorageClass] [ThreadLocal]
                         [unnamed_addr] [AddrSpace] [ExternallyInitialized]
                         <global | constant> <Type> [<InitializerConstant>]
                         [, section "name"] [, comdat [($name)]]
                         [, align <Alignment>]

For example, the following defines a global in a numbered address space
with an initializer, section, and alignment:

.. code-block:: llvm

    @G = addrspace(5) constant float 1.0, section "foo", align 4

The following example just declares a global variable

.. code-block:: llvm

   @G = external global i32

The following example defines a thread-local global with the
``initialexec`` TLS model:

.. code-block:: llvm

    @G = thread_local(initialexec) global i32 0, align 4

.. _functionstructure:

Functions
---------

LLVM function definitions consist of the "``define``" keyword, an
optional :ref:`linkage type <linkage>`, an optional :ref:`visibility
style <visibility>`, an optional :ref:`DLL storage class <dllstorageclass>`,
an optional :ref:`calling convention <callingconv>`,
an optional ``unnamed_addr`` attribute, a return type, an optional
:ref:`parameter attribute <paramattrs>` for the return type, a function
name, a (possibly empty) argument list (each with optional :ref:`parameter
attributes <paramattrs>`), optional :ref:`function attributes <fnattrs>`,
an optional section, an optional alignment,
an optional :ref:`comdat <langref_comdats>`,
an optional :ref:`garbage collector name <gc>`, an optional :ref:`prefix <prefixdata>`,
an optional :ref:`prologue <prologuedata>`,
an optional :ref:`personality <personalityfn>`,
an opening curly brace, a list of basic blocks, and a closing curly brace.

LLVM function declarations consist of the "``declare``" keyword, an
optional :ref:`linkage type <linkage>`, an optional :ref:`visibility
style <visibility>`, an optional :ref:`DLL storage class <dllstorageclass>`,
an optional :ref:`calling convention <callingconv>`,
an optional ``unnamed_addr`` attribute, a return type, an optional
:ref:`parameter attribute <paramattrs>` for the return type, a function
name, a possibly empty list of arguments, an optional alignment, an optional
:ref:`garbage collector name <gc>`, an optional :ref:`prefix <prefixdata>`,
and an optional :ref:`prologue <prologuedata>`.

A function definition contains a list of basic blocks, forming the CFG (Control
Flow Graph) for the function. Each basic block may optionally start with a label
(giving the basic block a symbol table entry), contains a list of instructions,
and ends with a :ref:`terminator <terminators>` instruction (such as a branch or
function return). If an explicit label is not provided, a block is assigned an
implicit numbered label, using the next value from the same counter as used for
unnamed temporaries (:ref:`see above<identifiers>`). For example, if a function
entry block does not have an explicit label, it will be assigned label "%0",
then the first unnamed temporary in that block will be "%1", etc.

The first basic block in a function is special in two ways: it is
immediately executed on entrance to the function, and it is not allowed
to have predecessor basic blocks (i.e. there can not be any branches to
the entry block of a function). Because the block can have no
predecessors, it also cannot have any :ref:`PHI nodes <i_phi>`.

LLVM allows an explicit section to be specified for functions. If the
target supports it, it will emit functions to the section specified.
Additionally, the function can be placed in a COMDAT.

An explicit alignment may be specified for a function. If not present,
or if the alignment is set to zero, the alignment of the function is set
by the target to whatever it feels convenient. If an explicit alignment
is specified, the function is forced to have at least that much
alignment. All alignments must be a power of 2.

If the ``unnamed_addr`` attribute is given, the address is known to not
be significant and two identical functions can be merged.

Syntax::

    define [linkage] [visibility] [DLLStorageClass]
           [cconv] [ret attrs]
           <ResultType> @<FunctionName> ([argument list])
           [unnamed_addr] [fn Attrs] [section "name"] [comdat [($name)]]
           [align N] [gc] [prefix Constant] [prologue Constant]
           [personality Constant] { ... }

The argument list is a comma separated sequence of arguments where each
argument is of the following form:

Syntax::

   <type> [parameter Attrs] [name]


.. _langref_aliases:

Aliases
-------

Aliases, unlike function or variables, don't create any new data. They
are just a new symbol and metadata for an existing position.

Aliases have a name and an aliasee that is either a global value or a
constant expression.

Aliases may have an optional :ref:`linkage type <linkage>`, an optional
:ref:`visibility style <visibility>`, an optional :ref:`DLL storage class
<dllstorageclass>` and an optional :ref:`tls model <tls_model>`.

Syntax::

    @<Name> = [Linkage] [Visibility] [DLLStorageClass] [ThreadLocal] [unnamed_addr] alias <AliaseeTy> @<Aliasee>

The linkage must be one of ``private``, ``internal``, ``linkonce``, ``weak``,
``linkonce_odr``, ``weak_odr``, ``external``. Note that some system linkers
might not correctly handle dropping a weak symbol that is aliased.

Aliases that are not ``unnamed_addr`` are guaranteed to have the same address as
the aliasee expression. ``unnamed_addr`` ones are only guaranteed to point
to the same content.

Since aliases are only a second name, some restrictions apply, of which
some can only be checked when producing an object file:

* The expression defining the aliasee must be computable at assembly
  time. Since it is just a name, no relocations can be used.

* No alias in the expression can be weak as the possibility of the
  intermediate alias being overridden cannot be represented in an
  object file.

* No global value in the expression can be a declaration, since that
  would require a relocation, which is not possible.

.. _langref_comdats:

Comdats
-------

Comdat IR provides access to COFF and ELF object file COMDAT functionality.

Comdats have a name which represents the COMDAT key. All global objects that
specify this key will only end up in the final object file if the linker chooses
that key over some other key. Aliases are placed in the same COMDAT that their
aliasee computes to, if any.

Comdats have a selection kind to provide input on how the linker should
choose between keys in two different object files.

Syntax::

    $<Name> = comdat SelectionKind

The selection kind must be one of the following:

``any``
    The linker may choose any COMDAT key, the choice is arbitrary.
``exactmatch``
    The linker may choose any COMDAT key but the sections must contain the
    same data.
``largest``
    The linker will choose the section containing the largest COMDAT key.
``noduplicates``
    The linker requires that only section with this COMDAT key exist.
``samesize``
    The linker may choose any COMDAT key but the sections must contain the
    same amount of data.

Note that the Mach-O platform doesn't support COMDATs and ELF only supports
``any`` as a selection kind.

Here is an example of a COMDAT group where a function will only be selected if
the COMDAT key's section is the largest:

.. code-block:: llvm

   $foo = comdat largest
   @foo = global i32 2, comdat($foo)

   define void @bar() comdat($foo) {
     ret void
   }

As a syntactic sugar the ``$name`` can be omitted if the name is the same as
the global name:

.. code-block:: llvm

  $foo = comdat any
  @foo = global i32 2, comdat


In a COFF object file, this will create a COMDAT section with selection kind
``IMAGE_COMDAT_SELECT_LARGEST`` containing the contents of the ``@foo`` symbol
and another COMDAT section with selection kind
``IMAGE_COMDAT_SELECT_ASSOCIATIVE`` which is associated with the first COMDAT
section and contains the contents of the ``@bar`` symbol.

There are some restrictions on the properties of the global object.
It, or an alias to it, must have the same name as the COMDAT group when
targeting COFF.
The contents and size of this object may be used during link-time to determine
which COMDAT groups get selected depending on the selection kind.
Because the name of the object must match the name of the COMDAT group, the
linkage of the global object must not be local; local symbols can get renamed
if a collision occurs in the symbol table.

The combined use of COMDATS and section attributes may yield surprising results.
For example:

.. code-block:: llvm

   $foo = comdat any
   $bar = comdat any
   @g1 = global i32 42, section "sec", comdat($foo)
   @g2 = global i32 42, section "sec", comdat($bar)

From the object file perspective, this requires the creation of two sections
with the same name. This is necessary because both globals belong to different
COMDAT groups and COMDATs, at the object file level, are represented by
sections.

Note that certain IR constructs like global variables and functions may
create COMDATs in the object file in addition to any which are specified using
COMDAT IR. This arises when the code generator is configured to emit globals
in individual sections (e.g. when `-data-sections` or `-function-sections`
is supplied to `llc`).

.. _namedmetadatastructure:

Named Metadata
--------------

Named metadata is a collection of metadata. :ref:`Metadata
nodes <metadata>` (but not metadata strings) are the only valid
operands for a named metadata.

#. Named metadata are represented as a string of characters with the
   metadata prefix. The rules for metadata names are the same as for
   identifiers, but quoted names are not allowed. ``"\xx"`` type escapes
   are still valid, which allows any character to be part of a name.

Syntax::

    ; Some unnamed metadata nodes, which are referenced by the named metadata.
    !0 = !{!"zero"}
    !1 = !{!"one"}
    !2 = !{!"two"}
    ; A named metadata.
    !name = !{!0, !1, !2}

.. _paramattrs:

Parameter Attributes
--------------------

The return type and each parameter of a function type may have a set of
*parameter attributes* associated with them. Parameter attributes are
used to communicate additional information about the result or
parameters of a function. Parameter attributes are considered to be part
of the function, not of the function type, so functions with different
parameter attributes can have the same function type.

Parameter attributes are simple keywords that follow the type specified.
If multiple parameter attributes are needed, they are space separated.
For example:

.. code-block:: llvm

    declare i32 @printf(i8* noalias nocapture, ...)
    declare i32 @atoi(i8 zeroext)
    declare signext i8 @returns_signed_char()

Note that any attributes for the function result (``nounwind``,
``readonly``) come immediately after the argument list.

Currently, only the following parameter attributes are defined:

``zeroext``
    This indicates to the code generator that the parameter or return
    value should be zero-extended to the extent required by the target's
    ABI (which is usually 32-bits, but is 8-bits for a i1 on x86-64) by
    the caller (for a parameter) or the callee (for a return value).
``signext``
    This indicates to the code generator that the parameter or return
    value should be sign-extended to the extent required by the target's
    ABI (which is usually 32-bits) by the caller (for a parameter) or
    the callee (for a return value).
``inreg``
    This indicates that this parameter or return value should be treated
    in a special target-dependent fashion while emitting code for
    a function call or return (usually, by putting it in a register as
    opposed to memory, though some targets use it to distinguish between
    two different kinds of registers). Use of this attribute is
    target-specific.
``byval``
    This indicates that the pointer parameter should really be passed by
    value to the function. The attribute implies that a hidden copy of
    the pointee is made between the caller and the callee, so the callee
    is unable to modify the value in the caller. This attribute is only
    valid on LLVM pointer arguments. It is generally used to pass
    structs and arrays by value, but is also valid on pointers to
    scalars. The copy is considered to belong to the caller not the
    callee (for example, ``readonly`` functions should not write to
    ``byval`` parameters). This is not a valid attribute for return
    values.

    The byval attribute also supports specifying an alignment with the
    align attribute. It indicates the alignment of the stack slot to
    form and the known alignment of the pointer specified to the call
    site. If the alignment is not specified, then the code generator
    makes a target-specific assumption.

.. _attr_inalloca:

``inalloca``

    The ``inalloca`` argument attribute allows the caller to take the
    address of outgoing stack arguments. An ``inalloca`` argument must
    be a pointer to stack memory produced by an ``alloca`` instruction.
    The alloca, or argument allocation, must also be tagged with the
    inalloca keyword. Only the last argument may have the ``inalloca``
    attribute, and that argument is guaranteed to be passed in memory.

    An argument allocation may be used by a call at most once because
    the call may deallocate it. The ``inalloca`` attribute cannot be
    used in conjunction with other attributes that affect argument
    storage, like ``inreg``, ``nest``, ``sret``, or ``byval``. The
    ``inalloca`` attribute also disables LLVM's implicit lowering of
    large aggregate return values, which means that frontend authors
    must lower them with ``sret`` pointers.

    When the call site is reached, the argument allocation must have
    been the most recent stack allocation that is still live, or the
    results are undefined. It is possible to allocate additional stack
    space after an argument allocation and before its call site, but it
    must be cleared off with :ref:`llvm.stackrestore
    <int_stackrestore>`.

    See :doc:`InAlloca` for more information on how to use this
    attribute.

``sret``
    This indicates that the pointer parameter specifies the address of a
    structure that is the return value of the function in the source
    program. This pointer must be guaranteed by the caller to be valid:
    loads and stores to the structure may be assumed by the callee
    not to trap and to be properly aligned. This may only be applied to
    the first parameter. This is not a valid attribute for return
    values.

``align <n>``
    This indicates that the pointer value may be assumed by the optimizer to
    have the specified alignment.

    Note that this attribute has additional semantics when combined with the
    ``byval`` attribute.

.. _noalias:

``noalias``
    This indicates that objects accessed via pointer values
    :ref:`based <pointeraliasing>` on the argument or return value are not also
    accessed, during the execution of the function, via pointer values not
    *based* on the argument or return value. The attribute on a return value
    also has additional semantics described below. The caller shares the
    responsibility with the callee for ensuring that these requirements are met.
    For further details, please see the discussion of the NoAlias response in
    :ref:`alias analysis <Must, May, or No>`.

    Note that this definition of ``noalias`` is intentionally similar
    to the definition of ``restrict`` in C99 for function arguments.

    For function return values, C99's ``restrict`` is not meaningful,
    while LLVM's ``noalias`` is. Furthermore, the semantics of the ``noalias``
    attribute on return values are stronger than the semantics of the attribute
    when used on function arguments. On function return values, the ``noalias``
    attribute indicates that the function acts like a system memory allocation
    function, returning a pointer to allocated storage disjoint from the
    storage for any other object accessible to the caller.

``nocapture``
    This indicates that the callee does not make any copies of the
    pointer that outlive the callee itself. This is not a valid
    attribute for return values.

.. _nest:

``nest``
    This indicates that the pointer parameter can be excised using the
    :ref:`trampoline intrinsics <int_trampoline>`. This is not a valid
    attribute for return values and can only be applied to one parameter.

``returned``
    This indicates that the function always returns the argument as its return
    value. This is an optimization hint to the code generator when generating
    the caller, allowing tail call optimization and omission of register saves
    and restores in some cases; it is not checked or enforced when generating
    the callee. The parameter and the function return type must be valid
    operands for the :ref:`bitcast instruction <i_bitcast>`. This is not a
    valid attribute for return values and can only be applied to one parameter.

``nonnull``
    This indicates that the parameter or return pointer is not null. This
    attribute may only be applied to pointer typed parameters. This is not
    checked or enforced by LLVM, the caller must ensure that the pointer
    passed in is non-null, or the callee must ensure that the returned pointer
    is non-null.

``dereferenceable(<n>)``
    This indicates that the parameter or return pointer is dereferenceable. This
    attribute may only be applied to pointer typed parameters. A pointer that
    is dereferenceable can be loaded from speculatively without a risk of
    trapping. The number of bytes known to be dereferenceable must be provided
    in parentheses. It is legal for the number of bytes to be less than the
    size of the pointee type. The ``nonnull`` attribute does not imply
    dereferenceability (consider a pointer to one element past the end of an
    array), however ``dereferenceable(<n>)`` does imply ``nonnull`` in
    ``addrspace(0)`` (which is the default address space).

``dereferenceable_or_null(<n>)``
    This indicates that the parameter or return value isn't both
    non-null and non-dereferenceable (up to ``<n>`` bytes) at the same
    time. All non-null pointers tagged with
    ``dereferenceable_or_null(<n>)`` are ``dereferenceable(<n>)``.
    For address space 0 ``dereferenceable_or_null(<n>)`` implies that
    a pointer is exactly one of ``dereferenceable(<n>)`` or ``null``,
    and in other address spaces ``dereferenceable_or_null(<n>)``
    implies that a pointer is at least one of ``dereferenceable(<n>)``
    or ``null`` (i.e. it may be both ``null`` and
    ``dereferenceable(<n>)``). This attribute may only be applied to
    pointer typed parameters.

.. _gc:

Garbage Collector Strategy Names
--------------------------------

Each function may specify a garbage collector strategy name, which is simply a
string:

.. code-block:: llvm

    define void @f() gc "name" { ... }

The supported values of *name* includes those :ref:`built in to LLVM
<builtin-gc-strategies>` and any provided by loaded plugins. Specifying a GC
strategy will cause the compiler to alter its output in order to support the
named garbage collection algorithm. Note that LLVM itself does not contain a
garbage collector, this functionality is restricted to generating machine code
which can interoperate with a collector provided externally.

.. _prefixdata:

Prefix Data
-----------

Prefix data is data associated with a function which the code
generator will emit immediately before the function's entrypoint.
The purpose of this feature is to allow frontends to associate
language-specific runtime metadata with specific functions and make it
available through the function pointer while still allowing the
function pointer to be called.

To access the data for a given function, a program may bitcast the
function pointer to a pointer to the constant's type and dereference
index -1. This implies that the IR symbol points just past the end of
the prefix data. For instance, take the example of a function annotated
with a single ``i32``,

.. code-block:: llvm

    define void @f() prefix i32 123 { ... }

The prefix data can be referenced as,

.. code-block:: llvm

    %0 = bitcast void* () @f to i32*
    %a = getelementptr inbounds i32, i32* %0, i32 -1
    %b = load i32, i32* %a

Prefix data is laid out as if it were an initializer for a global variable
of the prefix data's type. The function will be placed such that the
beginning of the prefix data is aligned. This means that if the size
of the prefix data is not a multiple of the alignment size, the
function's entrypoint will not be aligned. If alignment of the
function's entrypoint is desired, padding must be added to the prefix
data.

A function may have prefix data but no body. This has similar semantics
to the ``available_externally`` linkage in that the data may be used by the
optimizers but will not be emitted in the object file.

.. _prologuedata:

Prologue Data
-------------

The ``prologue`` attribute allows arbitrary code (encoded as bytes) to
be inserted prior to the function body. This can be used for enabling
function hot-patching and instrumentation.

To maintain the semantics of ordinary function calls, the prologue data must
have a particular format. Specifically, it must begin with a sequence of
bytes which decode to a sequence of machine instructions, valid for the
module's target, which transfer control to the point immediately succeeding
the prologue data, without performing any other visible action. This allows
the inliner and other passes to reason about the semantics of the function
definition without needing to reason about the prologue data. Obviously this
makes the format of the prologue data highly target dependent.

A trivial example of valid prologue data for the x86 architecture is ``i8 144``,
which encodes the ``nop`` instruction:

.. code-block:: llvm

    define void @f() prologue i8 144 { ... }

Generally prologue data can be formed by encoding a relative branch instruction
which skips the metadata, as in this example of valid prologue data for the
x86_64 architecture, where the first two bytes encode ``jmp .+10``:

.. code-block:: llvm

    %0 = type <{ i8, i8, i8* }>

    define void @f() prologue %0 <{ i8 235, i8 8, i8* @md}> { ... }

A function may have prologue data but no body. This has similar semantics
to the ``available_externally`` linkage in that the data may be used by the
optimizers but will not be emitted in the object file.

.. _personalityfn:

Personality Function
--------------------

The ``personality`` attribute permits functions to specify what function
to use for exception handling.

.. _attrgrp:

Attribute Groups
----------------

Attribute groups are groups of attributes that are referenced by objects within
the IR. They are important for keeping ``.ll`` files readable, because a lot of
functions will use the same set of attributes. In the degenerative case of a
``.ll`` file that corresponds to a single ``.c`` file, the single attribute
group will capture the important command line flags used to build that file.

An attribute group is a module-level object. To use an attribute group, an
object references the attribute group's ID (e.g. ``#37``). An object may refer
to more than one attribute group. In that situation, the attributes from the
different groups are merged.

Here is an example of attribute groups for a function that should always be
inlined, has a stack alignment of 4, and which shouldn't use SSE instructions:

.. code-block:: llvm

   ; Target-independent attributes:
   attributes #0 = { alwaysinline alignstack=4 }

   ; Target-dependent attributes:
   attributes #1 = { "no-sse" }

   ; Function @f has attributes: alwaysinline, alignstack=4, and "no-sse".
   define void @f() #0 #1 { ... }

.. _fnattrs:

Function Attributes
-------------------

Function attributes are set to communicate additional information about
a function. Function attributes are considered to be part of the
function, not of the function type, so functions with different function
attributes can have the same function type.

Function attributes are simple keywords that follow the type specified.
If multiple attributes are needed, they are space separated. For
example:

.. code-block:: llvm

    define void @f() noinline { ... }
    define void @f() alwaysinline { ... }
    define void @f() alwaysinline optsize { ... }
    define void @f() optsize { ... }

``alignstack(<n>)``
    This attribute indicates that, when emitting the prologue and
    epilogue, the backend should forcibly align the stack pointer.
    Specify the desired alignment, which must be a power of two, in
    parentheses.
``alwaysinline``
    This attribute indicates that the inliner should attempt to inline
    this function into callers whenever possible, ignoring any active
    inlining size threshold for this caller.
``builtin``
    This indicates that the callee function at a call site should be
    recognized as a built-in function, even though the function's declaration
    uses the ``nobuiltin`` attribute. This is only valid at call sites for
    direct calls to functions that are declared with the ``nobuiltin``
    attribute.
``cold``
    This attribute indicates that this function is rarely called. When
    computing edge weights, basic blocks post-dominated by a cold
    function call are also considered to be cold; and, thus, given low
    weight.
``convergent``
    This attribute indicates that the callee is dependent on a convergent
    thread execution pattern under certain parallel execution models.
    Transformations that are execution model agnostic may only move or
    tranform this call if the final location is control equivalent to its
    original position in the program, where control equivalence is defined as
    A dominates B and B post-dominates A, or vice versa.
``inlinehint``
    This attribute indicates that the source code contained a hint that
    inlining this function is desirable (such as the "inline" keyword in
    C/C++). It is just a hint; it imposes no requirements on the
    inliner.
``jumptable``
    This attribute indicates that the function should be added to a
    jump-instruction table at code-generation time, and that all address-taken
    references to this function should be replaced with a reference to the
    appropriate jump-instruction-table function pointer. Note that this creates
    a new pointer for the original function, which means that code that depends
    on function-pointer identity can break. So, any function annotated with
    ``jumptable`` must also be ``unnamed_addr``.
``minsize``
    This attribute suggests that optimization passes and code generator
    passes make choices that keep the code size of this function as small
    as possible and perform optimizations that may sacrifice runtime
    performance in order to minimize the size of the generated code.
``naked``
    This attribute disables prologue / epilogue emission for the
    function. This can have very system-specific consequences.
``nobuiltin``
    This indicates that the callee function at a call site is not recognized as
    a built-in function. LLVM will retain the original call and not replace it
    with equivalent code based on the semantics of the built-in function, unless
    the call site uses the ``builtin`` attribute. This is valid at call sites
    and on function declarations and definitions.
``noduplicate``
    This attribute indicates that calls to the function cannot be
    duplicated. A call to a ``noduplicate`` function may be moved
    within its parent function, but may not be duplicated within
    its parent function.

    A function containing a ``noduplicate`` call may still
    be an inlining candidate, provided that the call is not
    duplicated by inlining. That implies that the function has
    internal linkage and only has one call site, so the original
    call is dead after inlining.
``noimplicitfloat``
    This attributes disables implicit floating point instructions.
``noinline``
    This attribute indicates that the inliner should never inline this
    function in any situation. This attribute may not be used together
    with the ``alwaysinline`` attribute.
``nonlazybind``
    This attribute suppresses lazy symbol binding for the function. This
    may make calls to the function faster, at the cost of extra program
    startup time if the function is not called during program startup.
``noredzone``
    This attribute indicates that the code generator should not use a
    red zone, even if the target-specific ABI normally permits it.
``noreturn``
    This function attribute indicates that the function never returns
    normally. This produces undefined behavior at runtime if the
    function ever does dynamically return.
``nounwind``
    This function attribute indicates that the function never raises an
    exception. If the function does raise an exception, its runtime
    behavior is undefined. However, functions marked nounwind may still
    trap or generate asynchronous exceptions. Exception handling schemes
    that are recognized by LLVM to handle asynchronous exceptions, such
    as SEH, will still provide their implementation defined semantics.
``optnone``
    This function attribute indicates that the function is not optimized
    by any optimization or code generator passes with the
    exception of interprocedural optimization passes.
    This attribute cannot be used together with the ``alwaysinline``
    attribute; this attribute is also incompatible
    with the ``minsize`` attribute and the ``optsize`` attribute.

    This attribute requires the ``noinline`` attribute to be specified on
    the function as well, so the function is never inlined into any caller.
    Only functions with the ``alwaysinline`` attribute are valid
    candidates for inlining into the body of this function.
``optsize``
    This attribute suggests that optimization passes and code generator
    passes make choices that keep the code size of this function low,
    and otherwise do optimizations specifically to reduce code size as
    long as they do not significantly impact runtime performance.
``readnone``
    On a function, this attribute indicates that the function computes its
    result (or decides to unwind an exception) based strictly on its arguments,
    without dereferencing any pointer arguments or otherwise accessing
    any mutable state (e.g. memory, control registers, etc) visible to
    caller functions. It does not write through any pointer arguments
    (including ``byval`` arguments) and never changes any state visible
    to callers. This means that it cannot unwind exceptions by calling
    the ``C++`` exception throwing methods.

    On an argument, this attribute indicates that the function does not
    dereference that pointer argument, even though it may read or write the
    memory that the pointer points to if accessed through other pointers.
``readonly``
    On a function, this attribute indicates that the function does not write
    through any pointer arguments (including ``byval`` arguments) or otherwise
    modify any state (e.g. memory, control registers, etc) visible to
    caller functions. It may dereference pointer arguments and read
    state that may be set in the caller. A readonly function always
    returns the same value (or unwinds an exception identically) when
    called with the same set of arguments and global state. It cannot
    unwind an exception by calling the ``C++`` exception throwing
    methods.

    On an argument, this attribute indicates that the function does not write
    through this pointer argument, even though it may write to the memory that
    the pointer points to.
``argmemonly``
    This attribute indicates that the only memory accesses inside function are
    loads and stores from objects pointed to by its pointer-typed arguments,
    with arbitrary offsets. Or in other words, all memory operations in the
    function can refer to memory only using pointers based on its function
    arguments.
    Note that ``argmemonly`` can be used together with ``readonly`` attribute
    in order to specify that function reads only from its arguments.
``returns_twice``
    This attribute indicates that this function can return twice. The C
    ``setjmp`` is an example of such a function. The compiler disables
    some optimizations (like tail calls) in the caller of these
    functions.
``safestack``
    This attribute indicates that
    `SafeStack <http://clang.llvm.org/docs/SafeStack.html>`_
    protection is enabled for this function.

    If a function that has a ``safestack`` attribute is inlined into a
    function that doesn't have a ``safestack`` attribute or which has an
    ``ssp``, ``sspstrong`` or ``sspreq`` attribute, then the resulting
    function will have a ``safestack`` attribute.
``sanitize_address``
    This attribute indicates that AddressSanitizer checks
    (dynamic address safety analysis) are enabled for this function.
``sanitize_memory``
    This attribute indicates that MemorySanitizer checks (dynamic detection
    of accesses to uninitialized memory) are enabled for this function.
``sanitize_thread``
    This attribute indicates that ThreadSanitizer checks
    (dynamic thread safety analysis) are enabled for this function.
``ssp``
    This attribute indicates that the function should emit a stack
    smashing protector. It is in the form of a "canary" --- a random value
    placed on the stack before the local variables that's checked upon
    return from the function to see if it has been overwritten. A
    heuristic is used to determine if a function needs stack protectors
    or not. The heuristic used will enable protectors for functions with:

    - Character arrays larger than ``ssp-buffer-size`` (default 8).
    - Aggregates containing character arrays larger than ``ssp-buffer-size``.
    - Calls to alloca() with variable sizes or constant sizes greater than
      ``ssp-buffer-size``.

    Variables that are identified as requiring a protector will be arranged
    on the stack such that they are adjacent to the stack protector guard.

    If a function that has an ``ssp`` attribute is inlined into a
    function that doesn't have an ``ssp`` attribute, then the resulting
    function will have an ``ssp`` attribute.
``sspreq``
    This attribute indicates that the function should *always* emit a
    stack smashing protector. This overrides the ``ssp`` function
    attribute.

    Variables that are identified as requiring a protector will be arranged
    on the stack such that they are adjacent to the stack protector guard.
    The specific layout rules are:

    #. Large arrays and structures containing large arrays
       (``>= ssp-buffer-size``) are closest to the stack protector.
    #. Small arrays and structures containing small arrays
       (``< ssp-buffer-size``) are 2nd closest to the protector.
    #. Variables that have had their address taken are 3rd closest to the
       protector.

    If a function that has an ``sspreq`` attribute is inlined into a
    function that doesn't have an ``sspreq`` attribute or which has an
    ``ssp`` or ``sspstrong`` attribute, then the resulting function will have
    an ``sspreq`` attribute.
``sspstrong``
    This attribute indicates that the function should emit a stack smashing
    protector. This attribute causes a strong heuristic to be used when
    determining if a function needs stack protectors. The strong heuristic
    will enable protectors for functions with:

    - Arrays of any size and type
    - Aggregates containing an array of any size and type.
    - Calls to alloca().
    - Local variables that have had their address taken.

    Variables that are identified as requiring a protector will be arranged
    on the stack such that they are adjacent to the stack protector guard.
    The specific layout rules are:

    #. Large arrays and structures containing large arrays
       (``>= ssp-buffer-size``) are closest to the stack protector.
    #. Small arrays and structures containing small arrays
       (``< ssp-buffer-size``) are 2nd closest to the protector.
    #. Variables that have had their address taken are 3rd closest to the
       protector.

    This overrides the ``ssp`` function attribute.

    If a function that has an ``sspstrong`` attribute is inlined into a
    function that doesn't have an ``sspstrong`` attribute, then the
    resulting function will have an ``sspstrong`` attribute.
``"thunk"``
    This attribute indicates that the function will delegate to some other
    function with a tail call. The prototype of a thunk should not be used for
    optimization purposes. The caller is expected to cast the thunk prototype to
    match the thunk target prototype.
``uwtable``
    This attribute indicates that the ABI being targeted requires that
    an unwind table entry be produced for this function even if we can
    show that no exceptions passes by it. This is normally the case for
    the ELF x86-64 abi, but it can be disabled for some compilation
    units.

.. _moduleasm:

Module-Level Inline Assembly
----------------------------

Modules may contain "module-level inline asm" blocks, which corresponds
to the GCC "file scope inline asm" blocks. These blocks are internally
concatenated by LLVM and treated as a single unit, but may be separated
in the ``.ll`` file if desired. The syntax is very simple:

.. code-block:: llvm

    module asm "inline asm code goes here"
    module asm "more can go here"

The strings can contain any character by escaping non-printable
characters. The escape sequence used is simply "\\xx" where "xx" is the
two digit hex code for the number.

Note that the assembly string *must* be parseable by LLVM's integrated assembler
(unless it is disabled), even when emitting a ``.s`` file.

.. _langref_datalayout:

Data Layout
-----------

A module may specify a target specific data layout string that specifies
how data is to be laid out in memory. The syntax for the data layout is
simply:

.. code-block:: llvm

    target datalayout = "layout specification"

The *layout specification* consists of a list of specifications
separated by the minus sign character ('-'). Each specification starts
with a letter and may include other information after the letter to
define some aspect of the data layout. The specifications accepted are
as follows:

``E``
    Specifies that the target lays out data in big-endian form. That is,
    the bits with the most significance have the lowest address
    location.
``e``
    Specifies that the target lays out data in little-endian form. That
    is, the bits with the least significance have the lowest address
    location.
``S<size>``
    Specifies the natural alignment of the stack in bits. Alignment
    promotion of stack variables is limited to the natural stack
    alignment to avoid dynamic stack realignment. The stack alignment
    must be a multiple of 8-bits. If omitted, the natural stack
    alignment defaults to "unspecified", which does not prevent any
    alignment promotions.
``p[n]:<size>:<abi>:<pref>``
    This specifies the *size* of a pointer and its ``<abi>`` and
    ``<pref>``\erred alignments for address space ``n``. All sizes are in
    bits. The address space, ``n``, is optional, and if not specified,
    denotes the default address space 0. The value of ``n`` must be
    in the range [1,2^23).
``i<size>:<abi>:<pref>``
    This specifies the alignment for an integer type of a given bit
    ``<size>``. The value of ``<size>`` must be in the range [1,2^23).
``v<size>:<abi>:<pref>``
    This specifies the alignment for a vector type of a given bit
    ``<size>``.
``f<size>:<abi>:<pref>``
    This specifies the alignment for a floating point type of a given bit
    ``<size>``. Only values of ``<size>`` that are supported by the target
    will work. 32 (float) and 64 (double) are supported on all targets; 80
    or 128 (different flavors of long double) are also supported on some
    targets.
``a:<abi>:<pref>``
    This specifies the alignment for an object of aggregate type.
``m:<mangling>``
    If present, specifies that llvm names are mangled in the output. The
    options are

    * ``e``: ELF mangling: Private symbols get a ``.L`` prefix.
    * ``m``: Mips mangling: Private symbols get a ``$`` prefix.
    * ``o``: Mach-O mangling: Private symbols get ``L`` prefix. Other
      symbols get a ``_`` prefix.
    * ``w``: Windows COFF prefix:  Similar to Mach-O, but stdcall and fastcall
      functions also get a suffix based on the frame size.
``n<size1>:<size2>:<size3>...``
    This specifies a set of native integer widths for the target CPU in
    bits. For example, it might contain ``n32`` for 32-bit PowerPC,
    ``n32:64`` for PowerPC 64, or ``n8:16:32:64`` for X86-64. Elements of
    this set are considered to support most general arithmetic operations
    efficiently.

On every specification that takes a ``<abi>:<pref>``, specifying the
``<pref>`` alignment is optional. If omitted, the preceding ``:``
should be omitted too and ``<pref>`` will be equal to ``<abi>``.

When constructing the data layout for a given target, LLVM starts with a
default set of specifications which are then (possibly) overridden by
the specifications in the ``datalayout`` keyword. The default
specifications are given in this list:

-  ``E`` - big endian
-  ``p:64:64:64`` - 64-bit pointers with 64-bit alignment.
-  ``p[n]:64:64:64`` - Other address spaces are assumed to be the
   same as the default address space.
-  ``S0`` - natural stack alignment is unspecified
-  ``i1:8:8`` - i1 is 8-bit (byte) aligned
-  ``i8:8:8`` - i8 is 8-bit (byte) aligned
-  ``i16:16:16`` - i16 is 16-bit aligned
-  ``i32:32:32`` - i32 is 32-bit aligned
-  ``i64:32:64`` - i64 has ABI alignment of 32-bits but preferred
   alignment of 64-bits
-  ``f16:16:16`` - half is 16-bit aligned
-  ``f32:32:32`` - float is 32-bit aligned
-  ``f64:64:64`` - double is 64-bit aligned
-  ``f128:128:128`` - quad is 128-bit aligned
-  ``v64:64:64`` - 64-bit vector is 64-bit aligned
-  ``v128:128:128`` - 128-bit vector is 128-bit aligned
-  ``a:0:64`` - aggregates are 64-bit aligned

When LLVM is determining the alignment for a given type, it uses the
following rules:

#. If the type sought is an exact match for one of the specifications,
   that specification is used.
#. If no match is found, and the type sought is an integer type, then
   the smallest integer type that is larger than the bitwidth of the
   sought type is used. If none of the specifications are larger than
   the bitwidth then the largest integer type is used. For example,
   given the default specifications above, the i7 type will use the
   alignment of i8 (next largest) while both i65 and i256 will use the
   alignment of i64 (largest specified).
#. If no match is found, and the type sought is a vector type, then the
   largest vector type that is smaller than the sought vector type will
   be used as a fall back. This happens because <128 x double> can be
   implemented in terms of 64 <2 x double>, for example.

The function of the data layout string may not be what you expect.
Notably, this is not a specification from the frontend of what alignment
the code generator should use.

Instead, if specified, the target data layout is required to match what
the ultimate *code generator* expects. This string is used by the
mid-level optimizers to improve code, and this only works if it matches
what the ultimate code generator uses. There is no way to generate IR
that does not embed this target-specific detail into the IR. If you
don't specify the string, the default specifications will be used to
generate a Data Layout and the optimization phases will operate
accordingly and introduce target specificity into the IR with respect to
these default specifications.

.. _langref_triple:

Target Triple
-------------

A module may specify a target triple string that describes the target
host. The syntax for the target triple is simply:

.. code-block:: llvm

    target triple = "x86_64-apple-macosx10.7.0"

The *target triple* string consists of a series of identifiers delimited
by the minus sign character ('-'). The canonical forms are:

::

    ARCHITECTURE-VENDOR-OPERATING_SYSTEM
    ARCHITECTURE-VENDOR-OPERATING_SYSTEM-ENVIRONMENT

This information is passed along to the backend so that it generates
code for the proper architecture. It's possible to override this on the
command line with the ``-mtriple`` command line option.

.. _pointeraliasing:

Pointer Aliasing Rules
----------------------

Any memory access must be done through a pointer value associated with
an address range of the memory access, otherwise the behavior is
undefined. Pointer values are associated with address ranges according
to the following rules:

-  A pointer value is associated with the addresses associated with any
   value it is *based* on.
-  An address of a global variable is associated with the address range
   of the variable's storage.
-  The result value of an allocation instruction is associated with the
   address range of the allocated storage.
-  A null pointer in the default address-space is associated with no
   address.
-  An integer constant other than zero or a pointer value returned from
   a function not defined within LLVM may be associated with address
   ranges allocated through mechanisms other than those provided by
   LLVM. Such ranges shall not overlap with any ranges of addresses
   allocated by mechanisms provided by LLVM.

A pointer value is *based* on another pointer value according to the
following rules:

-  A pointer value formed from a ``getelementptr`` operation is *based*
   on the first value operand of the ``getelementptr``.
-  The result value of a ``bitcast`` is *based* on the operand of the
   ``bitcast``.
-  A pointer value formed by an ``inttoptr`` is *based* on all pointer
   values that contribute (directly or indirectly) to the computation of
   the pointer's value.
-  The "*based* on" relationship is transitive.

Note that this definition of *"based"* is intentionally similar to the
definition of *"based"* in C99, though it is slightly weaker.

LLVM IR does not associate types with memory. The result type of a
``load`` merely indicates the size and alignment of the memory from
which to load, as well as the interpretation of the value. The first
operand type of a ``store`` similarly only indicates the size and
alignment of the store.

Consequently, type-based alias analysis, aka TBAA, aka
``-fstrict-aliasing``, is not applicable to general unadorned LLVM IR.
:ref:`Metadata <metadata>` may be used to encode additional information
which specialized optimization passes may use to implement type-based
alias analysis.

.. _volatile:

Volatile Memory Accesses
------------------------

Certain memory accesses, such as :ref:`load <i_load>`'s,
:ref:`store <i_store>`'s, and :ref:`llvm.memcpy <int_memcpy>`'s may be
marked ``volatile``. The optimizers must not change the number of
volatile operations or change their order of execution relative to other
volatile operations. The optimizers *may* change the order of volatile
operations relative to non-volatile operations. This is not Java's
"volatile" and has no cross-thread synchronization behavior.

IR-level volatile loads and stores cannot safely be optimized into
llvm.memcpy or llvm.memmove intrinsics even when those intrinsics are
flagged volatile. Likewise, the backend should never split or merge
target-legal volatile load/store instructions.

.. admonition:: Rationale

 Platforms may rely on volatile loads and stores of natively supported
 data width to be executed as single instruction. For example, in C
 this holds for an l-value of volatile primitive type with native
 hardware support, but not necessarily for aggregate types. The
 frontend upholds these expectations, which are intentionally
 unspecified in the IR. The rules above ensure that IR transformations
 do not violate the frontend's contract with the language.

.. _memmodel:

Memory Model for Concurrent Operations
--------------------------------------

The LLVM IR does not define any way to start parallel threads of
execution or to register signal handlers. Nonetheless, there are
platform-specific ways to create them, and we define LLVM IR's behavior
in their presence. This model is inspired by the C++0x memory model.

For a more informal introduction to this model, see the :doc:`Atomics`.

We define a *happens-before* partial order as the least partial order
that

-  Is a superset of single-thread program order, and
-  When a *synchronizes-with* ``b``, includes an edge from ``a`` to
   ``b``. *Synchronizes-with* pairs are introduced by platform-specific
   techniques, like pthread locks, thread creation, thread joining,
   etc., and by atomic instructions. (See also :ref:`Atomic Memory Ordering
   Constraints <ordering>`).

Note that program order does not introduce *happens-before* edges
between a thread and signals executing inside that thread.

Every (defined) read operation (load instructions, memcpy, atomic
loads/read-modify-writes, etc.) R reads a series of bytes written by
(defined) write operations (store instructions, atomic
stores/read-modify-writes, memcpy, etc.). For the purposes of this
section, initialized globals are considered to have a write of the
initializer which is atomic and happens before any other read or write
of the memory in question. For each byte of a read R, R\ :sub:`byte`
may see any write to the same byte, except:

-  If write\ :sub:`1`  happens before write\ :sub:`2`, and
   write\ :sub:`2` happens before R\ :sub:`byte`, then
   R\ :sub:`byte` does not see write\ :sub:`1`.
-  If R\ :sub:`byte` happens before write\ :sub:`3`, then
   R\ :sub:`byte` does not see write\ :sub:`3`.

Given that definition, R\ :sub:`byte` is defined as follows:

-  If R is volatile, the result is target-dependent. (Volatile is
   supposed to give guarantees which can support ``sig_atomic_t`` in
   C/C++, and may be used for accesses to addresses that do not behave
   like normal memory. It does not generally provide cross-thread
   synchronization.)
-  Otherwise, if there is no write to the same byte that happens before
   R\ :sub:`byte`, R\ :sub:`byte` returns ``undef`` for that byte.
-  Otherwise, if R\ :sub:`byte` may see exactly one write,
   R\ :sub:`byte` returns the value written by that write.
-  Otherwise, if R is atomic, and all the writes R\ :sub:`byte` may
   see are atomic, it chooses one of the values written. See the :ref:`Atomic
   Memory Ordering Constraints <ordering>` section for additional
   constraints on how the choice is made.
-  Otherwise R\ :sub:`byte` returns ``undef``.

R returns the value composed of the series of bytes it read. This
implies that some bytes within the value may be ``undef`` **without**
the entire value being ``undef``. Note that this only defines the
semantics of the operation; it doesn't mean that targets will emit more
than one instruction to read the series of bytes.

Note that in cases where none of the atomic intrinsics are used, this
model places only one restriction on IR transformations on top of what
is required for single-threaded execution: introducing a store to a byte
which might not otherwise be stored is not allowed in general.
(Specifically, in the case where another thread might write to and read
from an address, introducing a store can change a load that may see
exactly one write into a load that may see multiple writes.)

.. _ordering:

Atomic Memory Ordering Constraints
----------------------------------

Atomic instructions (:ref:`cmpxchg <i_cmpxchg>`,
:ref:`atomicrmw <i_atomicrmw>`, :ref:`fence <i_fence>`,
:ref:`atomic load <i_load>`, and :ref:`atomic store <i_store>`) take
ordering parameters that determine which other atomic instructions on
the same address they *synchronize with*. These semantics are borrowed
from Java and C++0x, but are somewhat more colloquial. If these
descriptions aren't precise enough, check those specs (see spec
references in the :doc:`atomics guide <Atomics>`).
:ref:`fence <i_fence>` instructions treat these orderings somewhat
differently since they don't take an address. See that instruction's
documentation for details.

For a simpler introduction to the ordering constraints, see the
:doc:`Atomics`.

``unordered``
    The set of values that can be read is governed by the happens-before
    partial order. A value cannot be read unless some operation wrote
    it. This is intended to provide a guarantee strong enough to model
    Java's non-volatile shared variables. This ordering cannot be
    specified for read-modify-write operations; it is not strong enough
    to make them atomic in any interesting way.
``monotonic``
    In addition to the guarantees of ``unordered``, there is a single
    total order for modifications by ``monotonic`` operations on each
    address. All modification orders must be compatible with the
    happens-before order. There is no guarantee that the modification
    orders can be combined to a global total order for the whole program
    (and this often will not be possible). The read in an atomic
    read-modify-write operation (:ref:`cmpxchg <i_cmpxchg>` and
    :ref:`atomicrmw <i_atomicrmw>`) reads the value in the modification
    order immediately before the value it writes. If one atomic read
    happens before another atomic read of the same address, the later
    read must see the same value or a later value in the address's
    modification order. This disallows reordering of ``monotonic`` (or
    stronger) operations on the same address. If an address is written
    ``monotonic``-ally by one thread, and other threads ``monotonic``-ally
    read that address repeatedly, the other threads must eventually see
    the write. This corresponds to the C++0x/C1x
    ``memory_order_relaxed``.
``acquire``
    In addition to the guarantees of ``monotonic``, a
    *synchronizes-with* edge may be formed with a ``release`` operation.
    This is intended to model C++'s ``memory_order_acquire``.
``release``
    In addition to the guarantees of ``monotonic``, if this operation
    writes a value which is subsequently read by an ``acquire``
    operation, it *synchronizes-with* that operation. (This isn't a
    complete description; see the C++0x definition of a release
    sequence.) This corresponds to the C++0x/C1x
    ``memory_order_release``.
``acq_rel`` (acquire+release)
    Acts as both an ``acquire`` and ``release`` operation on its
    address. This corresponds to the C++0x/C1x ``memory_order_acq_rel``.
``seq_cst`` (sequentially consistent)
    In addition to the guarantees of ``acq_rel`` (``acquire`` for an
    operation that only reads, ``release`` for an operation that only
    writes), there is a global total order on all
    sequentially-consistent operations on all addresses, which is
    consistent with the *happens-before* partial order and with the
    modification orders of all the affected addresses. Each
    sequentially-consistent read sees the last preceding write to the
    same address in this global order. This corresponds to the C++0x/C1x
    ``memory_order_seq_cst`` and Java volatile.

.. _singlethread:

If an atomic operation is marked ``singlethread``, it only *synchronizes
with* or participates in modification and seq\_cst total orderings with
other operations running in the same thread (for example, in signal
handlers).

.. _fastmath:

Fast-Math Flags
---------------

LLVM IR floating-point binary ops (:ref:`fadd <i_fadd>`,
:ref:`fsub <i_fsub>`, :ref:`fmul <i_fmul>`, :ref:`fdiv <i_fdiv>`,
:ref:`frem <i_frem>`, :ref:`fcmp <i_fcmp>`) have the following flags that can
be set to enable otherwise unsafe floating point operations

``nnan``
   No NaNs - Allow optimizations to assume the arguments and result are not
   NaN. Such optimizations are required to retain defined behavior over
   NaNs, but the value of the result is undefined.

``ninf``
   No Infs - Allow optimizations to assume the arguments and result are not
   +/-Inf. Such optimizations are required to retain defined behavior over
   +/-Inf, but the value of the result is undefined.

``nsz``
   No Signed Zeros - Allow optimizations to treat the sign of a zero
   argument or result as insignificant.

``arcp``
   Allow Reciprocal - Allow optimizations to use the reciprocal of an
   argument rather than perform division.

``fast``
   Fast - Allow algebraically equivalent transformations that may
   dramatically change results in floating point (e.g. reassociate). This
   flag implies all the others.

.. _uselistorder:

Use-list Order Directives
-------------------------

Use-list directives encode the in-memory order of each use-list, allowing the
order to be recreated. ``<order-indexes>`` is a comma-separated list of
indexes that are assigned to the referenced value's uses. The referenced
value's use-list is immediately sorted by these indexes.

Use-list directives may appear at function scope or global scope. They are not
instructions, and have no effect on the semantics of the IR. When they're at
function scope, they must appear after the terminator of the final basic block.

If basic blocks have their address taken via ``blockaddress()`` expressions,
``uselistorder_bb`` can be used to reorder their use-lists from outside their
function's scope.

:Syntax:

::

    uselistorder <ty> <value>, { <order-indexes> }
    uselistorder_bb @function, %block { <order-indexes> }

:Examples:

::

    define void @foo(i32 %arg1, i32 %arg2) {
    entry:
      ; ... instructions ...
    bb:
      ; ... instructions ...

      ; At function scope.
      uselistorder i32 %arg1, { 1, 0, 2 }
      uselistorder label %bb, { 1, 0 }
    }

    ; At global scope.
    uselistorder i32* @global, { 1, 2, 0 }
    uselistorder i32 7, { 1, 0 }
    uselistorder i32 (i32) @bar, { 1, 0 }
    uselistorder_bb @foo, %bb, { 5, 1, 3, 2, 0, 4 }

.. _typesystem:

Type System
===========

The LLVM type system is one of the most important features of the
intermediate representation. Being typed enables a number of
optimizations to be performed on the intermediate representation
directly, without having to do extra analyses on the side before the
transformation. A strong type system makes it easier to read the
generated code and enables novel analyses and transformations that are
not feasible to perform on normal three address code representations.

.. _t_void:

Void Type
---------

:Overview:


The void type does not represent any value and has no size.

:Syntax:


::

      void


.. _t_function:

Function Type
-------------

:Overview:


The function type can be thought of as a function signature. It consists of a
return type and a list of formal parameter types. The return type of a function
type is a void type or first class type --- except for :ref:`label <t_label>`
and :ref:`metadata <t_metadata>` types.

:Syntax:

::

      <returntype> (<parameter list>)

...where '``<parameter list>``' is a comma-separated list of type
specifiers. Optionally, the parameter list may include a type ``...``, which
indicates that the function takes a variable number of arguments. Variable
argument functions can access their arguments with the :ref:`variable argument
handling intrinsic <int_varargs>` functions. '``<returntype>``' is any type
except :ref:`label <t_label>` and :ref:`metadata <t_metadata>`.

:Examples:

+---------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| ``i32 (i32)``                   | function taking an ``i32``, returning an ``i32``                                                                                                                    |
+---------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| ``float (i16, i32 *) *``        | :ref:`Pointer <t_pointer>` to a function that takes an ``i16`` and a :ref:`pointer <t_pointer>` to ``i32``, returning ``float``.                                    |
+---------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| ``i32 (i8*, ...)``              | A vararg function that takes at least one :ref:`pointer <t_pointer>` to ``i8`` (char in C), which returns an integer. This is the signature for ``printf`` in LLVM. |
+---------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| ``{i32, i32} (i32)``            | A function taking an ``i32``, returning a :ref:`structure <t_struct>` containing two ``i32`` values                                                                 |
+---------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------+

.. _t_firstclass:

First Class Types
-----------------

The :ref:`first class <t_firstclass>` types are perhaps the most important.
Values of these types are the only ones which can be produced by
instructions.

.. _t_single_value:

Single Value Types
^^^^^^^^^^^^^^^^^^

These are the types that are valid in registers from CodeGen's perspective.

.. _t_integer:

Integer Type
""""""""""""

:Overview:

The integer type is a very simple type that simply specifies an
arbitrary bit width for the integer type desired. Any bit width from 1
bit to 2\ :sup:`23`\ -1 (about 8 million) can be specified.

:Syntax:

::

      iN

The number of bits the integer will occupy is specified by the ``N``
value.

Examples:
*********

+----------------+------------------------------------------------+
| ``i1``         | a single-bit integer.                          |
+----------------+------------------------------------------------+
| ``i32``        | a 32-bit integer.                              |
+----------------+------------------------------------------------+
| ``i1942652``   | a really big integer of over 1 million bits.   |
+----------------+------------------------------------------------+

.. _t_floating:

Floating Point Types
""""""""""""""""""""

.. list-table::
   :header-rows: 1

   * - Type
     - Description

   * - ``half``
     - 16-bit floating point value

   * - ``float``
     - 32-bit floating point value

   * - ``double``
     - 64-bit floating point value

   * - ``fp128``
     - 128-bit floating point value (112-bit mantissa)

   * - ``x86_fp80``
     -  80-bit floating point value (X87)

   * - ``ppc_fp128``
     - 128-bit floating point value (two 64-bits)

X86_mmx Type
""""""""""""

:Overview:

The x86_mmx type represents a value held in an MMX register on an x86
machine. The operations allowed on it are quite limited: parameters and
return values, load and store, and bitcast. User-specified MMX
instructions are represented as intrinsic or asm calls with arguments
and/or results of this type. There are no arrays, vectors or constants
of this type.

:Syntax:

::

      x86_mmx


.. _t_pointer:

Pointer Type
""""""""""""

:Overview:

The pointer type is used to specify memory locations. Pointers are
commonly used to reference objects in memory.

Pointer types may have an optional address space attribute defining the
numbered address space where the pointed-to object resides. The default
address space is number zero. The semantics of non-zero address spaces
are target-specific.

Note that LLVM does not permit pointers to void (``void*``) nor does it
permit pointers to labels (``label*``). Use ``i8*`` instead.

:Syntax:

::

      <type> *

:Examples:

+-------------------------+--------------------------------------------------------------------------------------------------------------+
| ``[4 x i32]*``          | A :ref:`pointer <t_pointer>` to :ref:`array <t_array>` of four ``i32`` values.                               |
+-------------------------+--------------------------------------------------------------------------------------------------------------+
| ``i32 (i32*) *``        | A :ref:`pointer <t_pointer>` to a :ref:`function <t_function>` that takes an ``i32*``, returning an ``i32``. |
+-------------------------+--------------------------------------------------------------------------------------------------------------+
| ``i32 addrspace(5)*``   | A :ref:`pointer <t_pointer>` to an ``i32`` value that resides in address space #5.                           |
+-------------------------+--------------------------------------------------------------------------------------------------------------+

.. _t_vector:

Vector Type
"""""""""""

:Overview:

A vector type is a simple derived type that represents a vector of
elements. Vector types are used when multiple primitive data are
operated in parallel using a single instruction (SIMD). A vector type
requires a size (number of elements) and an underlying primitive data
type. Vector types are considered :ref:`first class <t_firstclass>`.

:Syntax:

::

      < <# elements> x <elementtype> >

The number of elements is a constant integer value larger than 0;
elementtype may be any integer, floating point or pointer type. Vectors
of size zero are not allowed.

:Examples:

+-------------------+--------------------------------------------------+
| ``<4 x i32>``     | Vector of 4 32-bit integer values.               |
+-------------------+--------------------------------------------------+
| ``<8 x float>``   | Vector of 8 32-bit floating-point values.        |
+-------------------+--------------------------------------------------+
| ``<2 x i64>``     | Vector of 2 64-bit integer values.               |
+-------------------+--------------------------------------------------+
| ``<4 x i64*>``    | Vector of 4 pointers to 64-bit integer values.   |
+-------------------+--------------------------------------------------+

.. _t_label:

Label Type
^^^^^^^^^^

:Overview:

The label type represents code labels.

:Syntax:

::

      label

.. _t_token:

Token Type
^^^^^^^^^^

:Overview:

The token type is used when a value is associated with an instruction
but all uses of the value must not attempt to introspect or obscure it.
As such, it is not appropriate to have a :ref:`phi <i_phi>` or
:ref:`select <i_select>` of type token.

:Syntax:

::

      token



.. _t_metadata:

Metadata Type
^^^^^^^^^^^^^

:Overview:

The metadata type represents embedded metadata. No derived types may be
created from metadata except for :ref:`function <t_function>` arguments.

:Syntax:

::

      metadata

.. _t_aggregate:

Aggregate Types
^^^^^^^^^^^^^^^

Aggregate Types are a subset of derived types that can contain multiple
member types. :ref:`Arrays <t_array>` and :ref:`structs <t_struct>` are
aggregate types. :ref:`Vectors <t_vector>` are not considered to be
aggregate types.

.. _t_array:

Array Type
""""""""""

:Overview:

The array type is a very simple derived type that arranges elements
sequentially in memory. The array type requires a size (number of
elements) and an underlying data type.

:Syntax:

::

      [<# elements> x <elementtype>]

The number of elements is a constant integer value; ``elementtype`` may
be any type with a size.

:Examples:

+------------------+--------------------------------------+
| ``[40 x i32]``   | Array of 40 32-bit integer values.   |
+------------------+--------------------------------------+
| ``[41 x i32]``   | Array of 41 32-bit integer values.   |
+------------------+--------------------------------------+
| ``[4 x i8]``     | Array of 4 8-bit integer values.     |
+------------------+--------------------------------------+

Here are some examples of multidimensional arrays:

+-----------------------------+----------------------------------------------------------+
| ``[3 x [4 x i32]]``         | 3x4 array of 32-bit integer values.                      |
+-----------------------------+----------------------------------------------------------+
| ``[12 x [10 x float]]``     | 12x10 array of single precision floating point values.   |
+-----------------------------+----------------------------------------------------------+
| ``[2 x [3 x [4 x i16]]]``   | 2x3x4 array of 16-bit integer values.                    |
+-----------------------------+----------------------------------------------------------+

There is no restriction on indexing beyond the end of the array implied
by a static type (though there are restrictions on indexing beyond the
bounds of an allocated object in some cases). This means that
single-dimension 'variable sized array' addressing can be implemented in
LLVM with a zero length array type. An implementation of 'pascal style
arrays' in LLVM could use the type "``{ i32, [0 x float]}``", for
example.

.. _t_struct:

Structure Type
""""""""""""""

:Overview:

The structure type is used to represent a collection of data members
together in memory. The elements of a structure may be any type that has
a size.

Structures in memory are accessed using '``load``' and '``store``' by
getting a pointer to a field with the '``getelementptr``' instruction.
Structures in registers are accessed using the '``extractvalue``' and
'``insertvalue``' instructions.

Structures may optionally be "packed" structures, which indicate that
the alignment of the struct is one byte, and that there is no padding
between the elements. In non-packed structs, padding between field types
is inserted as defined by the DataLayout string in the module, which is
required to match what the underlying code generator expects.

Structures can either be "literal" or "identified". A literal structure
is defined inline with other types (e.g. ``{i32, i32}*``) whereas
identified types are always defined at the top level with a name.
Literal types are uniqued by their contents and can never be recursive
or opaque since there is no way to write one. Identified types can be
recursive, can be opaqued, and are never uniqued.

:Syntax:

::

      %T1 = type { <type list> }     ; Identified normal struct type
      %T2 = type <{ <type list> }>   ; Identified packed struct type

:Examples:

+------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| ``{ i32, i32, i32 }``        | A triple of three ``i32`` values                                                                                                                                                      |
+------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| ``{ float, i32 (i32) * }``   | A pair, where the first element is a ``float`` and the second element is a :ref:`pointer <t_pointer>` to a :ref:`function <t_function>` that takes an ``i32``, returning an ``i32``.  |
+------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| ``<{ i8, i32 }>``            | A packed struct known to be 5 bytes in size.                                                                                                                                          |
+------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+

.. _t_opaque:

Opaque Structure Types
""""""""""""""""""""""

:Overview:

Opaque structure types are used to represent named structure types that
do not have a body specified. This corresponds (for example) to the C
notion of a forward declared structure.

:Syntax:

::

      %X = type opaque
      %52 = type opaque

:Examples:

+--------------+-------------------+
| ``opaque``   | An opaque type.   |
+--------------+-------------------+

.. _constants:

Constants
=========

LLVM has several different basic types of constants. This section
describes them all and their syntax.

Simple Constants
----------------

**Boolean constants**
    The two strings '``true``' and '``false``' are both valid constants
    of the ``i1`` type.
**Integer constants**
    Standard integers (such as '4') are constants of the
    :ref:`integer <t_integer>` type. Negative numbers may be used with
    integer types.
**Floating point constants**
    Floating point constants use standard decimal notation (e.g.
    123.421), exponential notation (e.g. 1.23421e+2), or a more precise
    hexadecimal notation (see below). The assembler requires the exact
    decimal value of a floating-point constant. For example, the
    assembler accepts 1.25 but rejects 1.3 because 1.3 is a repeating
    decimal in binary. Floating point constants must have a :ref:`floating
    point <t_floating>` type.
**Null pointer constants**
    The identifier '``null``' is recognized as a null pointer constant
    and must be of :ref:`pointer type <t_pointer>`.

The one non-intuitive notation for constants is the hexadecimal form of
floating point constants. For example, the form
'``double    0x432ff973cafa8000``' is equivalent to (but harder to read
than) '``double 4.5e+15``'. The only time hexadecimal floating point
constants are required (and the only time that they are generated by the
disassembler) is when a floating point constant must be emitted but it
cannot be represented as a decimal floating point number in a reasonable
number of digits. For example, NaN's, infinities, and other special
values are represented in their IEEE hexadecimal format so that assembly
and disassembly do not cause any bits to change in the constants.

When using the hexadecimal form, constants of types half, float, and
double are represented using the 16-digit form shown above (which
matches the IEEE754 representation for double); half and float values
must, however, be exactly representable as IEEE 754 half and single
precision, respectively. Hexadecimal format is always used for long
double, and there are three forms of long double. The 80-bit format used
by x86 is represented as ``0xK`` followed by 20 hexadecimal digits. The
128-bit format used by PowerPC (two adjacent doubles) is represented by
``0xM`` followed by 32 hexadecimal digits. The IEEE 128-bit format is
represented by ``0xL`` followed by 32 hexadecimal digits. Long doubles
will only work if they match the long double format on your target.
The IEEE 16-bit format (half precision) is represented by ``0xH``
followed by 4 hexadecimal digits. All hexadecimal formats are big-endian
(sign bit at the left).

There are no constants of type x86_mmx.

.. _complexconstants:

Complex Constants
-----------------

Complex constants are a (potentially recursive) combination of simple
constants and smaller complex constants.

**Structure constants**
    Structure constants are represented with notation similar to
    structure type definitions (a comma separated list of elements,
    surrounded by braces (``{}``)). For example:
    "``{ i32 4, float 17.0, i32* @G }``", where "``@G``" is declared as
    "``@G = external global i32``". Structure constants must have
    :ref:`structure type <t_struct>`, and the number and types of elements
    must match those specified by the type.
**Array constants**
    Array constants are represented with notation similar to array type
    definitions (a comma separated list of elements, surrounded by
    square brackets (``[]``)). For example:
    "``[ i32 42, i32 11, i32 74 ]``". Array constants must have
    :ref:`array type <t_array>`, and the number and types of elements must
    match those specified by the type. As a special case, character array
    constants may also be represented as a double-quoted string using the ``c``
    prefix. For example: "``c"Hello World\0A\00"``".
**Vector constants**
    Vector constants are represented with notation similar to vector
    type definitions (a comma separated list of elements, surrounded by
    less-than/greater-than's (``<>``)). For example:
    "``< i32 42, i32 11, i32 74, i32 100 >``". Vector constants
    must have :ref:`vector type <t_vector>`, and the number and types of
    elements must match those specified by the type.
**Zero initialization**
    The string '``zeroinitializer``' can be used to zero initialize a
    value to zero of *any* type, including scalar and
    :ref:`aggregate <t_aggregate>` types. This is often used to avoid
    having to print large zero initializers (e.g. for large arrays) and
    is always exactly equivalent to using explicit zero initializers.
**Metadata node**
    A metadata node is a constant tuple without types. For example:
    "``!{!0, !{!2, !0}, !"test"}``". Metadata can reference constant values,
    for example: "``!{!0, i32 0, i8* @global, i64 (i64)* @function, !"str"}``".
    Unlike other typed constants that are meant to be interpreted as part of
    the instruction stream, metadata is a place to attach additional
    information such as debug info.

Global Variable and Function Addresses
--------------------------------------

The addresses of :ref:`global variables <globalvars>` and
:ref:`functions <functionstructure>` are always implicitly valid
(link-time) constants. These constants are explicitly referenced when
the :ref:`identifier for the global <identifiers>` is used and always have
:ref:`pointer <t_pointer>` type. For example, the following is a legal LLVM
file:

.. code-block:: llvm

    @X = global i32 17
    @Y = global i32 42
    @Z = global [2 x i32*] [ i32* @X, i32* @Y ]

.. _undefvalues:

Undefined Values
----------------

The string '``undef``' can be used anywhere a constant is expected, and
indicates that the user of the value may receive an unspecified
bit-pattern. Undefined values may be of any type (other than '``label``'
or '``void``') and be used anywhere a constant is permitted.

Undefined values are useful because they indicate to the compiler that
the program is well defined no matter what value is used. This gives the
compiler more freedom to optimize. Here are some examples of
(potentially surprising) transformations that are valid (in pseudo IR):

.. code-block:: llvm

      %A = add %X, undef
      %B = sub %X, undef
      %C = xor %X, undef
    Safe:
      %A = undef
      %B = undef
      %C = undef

This is safe because all of the output bits are affected by the undef
bits. Any output bit can have a zero or one depending on the input bits.

.. code-block:: llvm

      %A = or %X, undef
      %B = and %X, undef
    Safe:
      %A = -1
      %B = 0
    Unsafe:
      %A = undef
      %B = undef

These logical operations have bits that are not always affected by the
input. For example, if ``%X`` has a zero bit, then the output of the
'``and``' operation will always be a zero for that bit, no matter what
the corresponding bit from the '``undef``' is. As such, it is unsafe to
optimize or assume that the result of the '``and``' is '``undef``'.
However, it is safe to assume that all bits of the '``undef``' could be
0, and optimize the '``and``' to 0. Likewise, it is safe to assume that
all the bits of the '``undef``' operand to the '``or``' could be set,
allowing the '``or``' to be folded to -1.

.. code-block:: llvm

      %A = select undef, %X, %Y
      %B = select undef, 42, %Y
      %C = select %X, %Y, undef
    Safe:
      %A = %X     (or %Y)
      %B = 42     (or %Y)
      %C = %Y
    Unsafe:
      %A = undef
      %B = undef
      %C = undef

This set of examples shows that undefined '``select``' (and conditional
branch) conditions can go *either way*, but they have to come from one
of the two operands. In the ``%A`` example, if ``%X`` and ``%Y`` were
both known to have a clear low bit, then ``%A`` would have to have a
cleared low bit. However, in the ``%C`` example, the optimizer is
allowed to assume that the '``undef``' operand could be the same as
``%Y``, allowing the whole '``select``' to be eliminated.

.. code-block:: llvm

      %A = xor undef, undef

      %B = undef
      %C = xor %B, %B

      %D = undef
      %E = icmp slt %D, 4
      %F = icmp gte %D, 4

    Safe:
      %A = undef
      %B = undef
      %C = undef
      %D = undef
      %E = undef
      %F = undef

This example points out that two '``undef``' operands are not
necessarily the same. This can be surprising to people (and also matches
C semantics) where they assume that "``X^X``" is always zero, even if
``X`` is undefined. This isn't true for a number of reasons, but the
short answer is that an '``undef``' "variable" can arbitrarily change
its value over its "live range". This is true because the variable
doesn't actually *have a live range*. Instead, the value is logically
read from arbitrary registers that happen to be around when needed, so
the value is not necessarily consistent over time. In fact, ``%A`` and
``%C`` need to have the same semantics or the core LLVM "replace all
uses with" concept would not hold.

.. code-block:: llvm

      %A = fdiv undef, %X
      %B = fdiv %X, undef
    Safe:
      %A = undef
    b: unreachable

These examples show the crucial difference between an *undefined value*
and *undefined behavior*. An undefined value (like '``undef``') is
allowed to have an arbitrary bit-pattern. This means that the ``%A``
operation can be constant folded to '``undef``', because the '``undef``'
could be an SNaN, and ``fdiv`` is not (currently) defined on SNaN's.
However, in the second example, we can make a more aggressive
assumption: because the ``undef`` is allowed to be an arbitrary value,
we are allowed to assume that it could be zero. Since a divide by zero
has *undefined behavior*, we are allowed to assume that the operation
does not execute at all. This allows us to delete the divide and all
code after it. Because the undefined operation "can't happen", the
optimizer can assume that it occurs in dead code.

.. code-block:: llvm

    a:  store undef -> %X
    b:  store %X -> undef
    Safe:
    a: <deleted>
    b: unreachable

These examples reiterate the ``fdiv`` example: a store *of* an undefined
value can be assumed to not have any effect; we can assume that the
value is overwritten with bits that happen to match what was already
there. However, a store *to* an undefined location could clobber
arbitrary memory, therefore, it has undefined behavior.

.. _poisonvalues:

Poison Values
-------------

Poison values are similar to :ref:`undef values <undefvalues>`, however
they also represent the fact that an instruction or constant expression
that cannot evoke side effects has nevertheless detected a condition
that results in undefined behavior.

There is currently no way of representing a poison value in the IR; they
only exist when produced by operations such as :ref:`add <i_add>` with
the ``nsw`` flag.

Poison value behavior is defined in terms of value *dependence*:

-  Values other than :ref:`phi <i_phi>` nodes depend on their operands.
-  :ref:`Phi <i_phi>` nodes depend on the operand corresponding to
   their dynamic predecessor basic block.
-  Function arguments depend on the corresponding actual argument values
   in the dynamic callers of their functions.
-  :ref:`Call <i_call>` instructions depend on the :ref:`ret <i_ret>`
   instructions that dynamically transfer control back to them.
-  :ref:`Invoke <i_invoke>` instructions depend on the
   :ref:`ret <i_ret>`, :ref:`resume <i_resume>`, or exception-throwing
   call instructions that dynamically transfer control back to them.
-  Non-volatile loads and stores depend on the most recent stores to all
   of the referenced memory addresses, following the order in the IR
   (including loads and stores implied by intrinsics such as
   :ref:`@llvm.memcpy <int_memcpy>`.)
-  An instruction with externally visible side effects depends on the
   most recent preceding instruction with externally visible side
   effects, following the order in the IR. (This includes :ref:`volatile
   operations <volatile>`.)
-  An instruction *control-depends* on a :ref:`terminator
   instruction <terminators>` if the terminator instruction has
   multiple successors and the instruction is always executed when
   control transfers to one of the successors, and may not be executed
   when control is transferred to another.
-  Additionally, an instruction also *control-depends* on a terminator
   instruction if the set of instructions it otherwise depends on would
   be different if the terminator had transferred control to a different
   successor.
-  Dependence is transitive.

Poison values have the same behavior as :ref:`undef values <undefvalues>`,
with the additional effect that any instruction that has a *dependence*
on a poison value has undefined behavior.

Here are some examples:

.. code-block:: llvm

    entry:
      %poison = sub nuw i32 0, 1           ; Results in a poison value.
      %still_poison = and i32 %poison, 0   ; 0, but also poison.
      %poison_yet_again = getelementptr i32, i32* @h, i32 %still_poison
      store i32 0, i32* %poison_yet_again  ; memory at @h[0] is poisoned

      store i32 %poison, i32* @g           ; Poison value stored to memory.
      %poison2 = load i32, i32* @g         ; Poison value loaded back from memory.

      store volatile i32 %poison, i32* @g  ; External observation; undefined behavior.

      %narrowaddr = bitcast i32* @g to i16*
      %wideaddr = bitcast i32* @g to i64*
      %poison3 = load i16, i16* %narrowaddr ; Returns a poison value.
      %poison4 = load i64, i64* %wideaddr  ; Returns a poison value.

      %cmp = icmp slt i32 %poison, 0       ; Returns a poison value.
      br i1 %cmp, label %true, label %end  ; Branch to either destination.

    true:
      store volatile i32 0, i32* @g        ; This is control-dependent on %cmp, so
                                           ; it has undefined behavior.
      br label %end

    end:
      %p = phi i32 [ 0, %entry ], [ 1, %true ]
                                           ; Both edges into this PHI are
                                           ; control-dependent on %cmp, so this
                                           ; always results in a poison value.

      store volatile i32 0, i32* @g        ; This would depend on the store in %true
                                           ; if %cmp is true, or the store in %entry
                                           ; otherwise, so this is undefined behavior.

      br i1 %cmp, label %second_true, label %second_end
                                           ; The same branch again, but this time the
                                           ; true block doesn't have side effects.

    second_true:
      ; No side effects!
      ret void

    second_end:
      store volatile i32 0, i32* @g        ; This time, the instruction always depends
                                           ; on the store in %end. Also, it is
                                           ; control-equivalent to %end, so this is
                                           ; well-defined (ignoring earlier undefined
                                           ; behavior in this example).

.. _blockaddress:

Addresses of Basic Blocks
-------------------------

``blockaddress(@function, %block)``

The '``blockaddress``' constant computes the address of the specified
basic block in the specified function, and always has an ``i8*`` type.
Taking the address of the entry block is illegal.

This value only has defined behavior when used as an operand to the
':ref:`indirectbr <i_indirectbr>`' instruction, or for comparisons
against null. Pointer equality tests between labels addresses results in
undefined behavior --- though, again, comparison against null is ok, and
no label is equal to the null pointer. This may be passed around as an
opaque pointer sized value as long as the bits are not inspected. This
allows ``ptrtoint`` and arithmetic to be performed on these values so
long as the original value is reconstituted before the ``indirectbr``
instruction.

Finally, some targets may provide defined semantics when using the value
as the operand to an inline assembly, but that is target specific.

.. _constantexprs:

Constant Expressions
--------------------

Constant expressions are used to allow expressions involving other
constants to be used as constants. Constant expressions may be of any
:ref:`first class <t_firstclass>` type and may involve any LLVM operation
that does not have side effects (e.g. load and call are not supported).
The following is the syntax for constant expressions:

``trunc (CST to TYPE)``
    Truncate a constant to another type. The bit size of CST must be
    larger than the bit size of TYPE. Both types must be integers.
``zext (CST to TYPE)``
    Zero extend a constant to another type. The bit size of CST must be
    smaller than the bit size of TYPE. Both types must be integers.
``sext (CST to TYPE)``
    Sign extend a constant to another type. The bit size of CST must be
    smaller than the bit size of TYPE. Both types must be integers.
``fptrunc (CST to TYPE)``
    Truncate a floating point constant to another floating point type.
    The size of CST must be larger than the size of TYPE. Both types
    must be floating point.
``fpext (CST to TYPE)``
    Floating point extend a constant to another type. The size of CST
    must be smaller or equal to the size of TYPE. Both types must be
    floating point.
``fptoui (CST to TYPE)``
    Convert a floating point constant to the corresponding unsigned
    integer constant. TYPE must be a scalar or vector integer type. CST
    must be of scalar or vector floating point type. Both CST and TYPE
    must be scalars, or vectors of the same number of elements. If the
    value won't fit in the integer type, the results are undefined.
``fptosi (CST to TYPE)``
    Convert a floating point constant to the corresponding signed
    integer constant. TYPE must be a scalar or vector integer type. CST
    must be of scalar or vector floating point type. Both CST and TYPE
    must be scalars, or vectors of the same number of elements. If the
    value won't fit in the integer type, the results are undefined.
``uitofp (CST to TYPE)``
    Convert an unsigned integer constant to the corresponding floating
    point constant. TYPE must be a scalar or vector floating point type.
    CST must be of scalar or vector integer type. Both CST and TYPE must
    be scalars, or vectors of the same number of elements. If the value
    won't fit in the floating point type, the results are undefined.
``sitofp (CST to TYPE)``
    Convert a signed integer constant to the corresponding floating
    point constant. TYPE must be a scalar or vector floating point type.
    CST must be of scalar or vector integer type. Both CST and TYPE must
    be scalars, or vectors of the same number of elements. If the value
    won't fit in the floating point type, the results are undefined.
``ptrtoint (CST to TYPE)``
    Convert a pointer typed constant to the corresponding integer
    constant. ``TYPE`` must be an integer type. ``CST`` must be of
    pointer type. The ``CST`` value is zero extended, truncated, or
    unchanged to make it fit in ``TYPE``.
``inttoptr (CST to TYPE)``
    Convert an integer constant to a pointer constant. TYPE must be a
    pointer type. CST must be of integer type. The CST value is zero
    extended, truncated, or unchanged to make it fit in a pointer size.
    This one is *really* dangerous!
``bitcast (CST to TYPE)``
    Convert a constant, CST, to another TYPE. The constraints of the
    operands are the same as those for the :ref:`bitcast
    instruction <i_bitcast>`.
``addrspacecast (CST to TYPE)``
    Convert a constant pointer or constant vector of pointer, CST, to another
    TYPE in a different address space. The constraints of the operands are the
    same as those for the :ref:`addrspacecast instruction <i_addrspacecast>`.
``getelementptr (TY, CSTPTR, IDX0, IDX1, ...)``, ``getelementptr inbounds (TY, CSTPTR, IDX0, IDX1, ...)``
    Perform the :ref:`getelementptr operation <i_getelementptr>` on
    constants. As with the :ref:`getelementptr <i_getelementptr>`
    instruction, the index list may have zero or more indexes, which are
    required to make sense for the type of "pointer to TY".
``select (COND, VAL1, VAL2)``
    Perform the :ref:`select operation <i_select>` on constants.
``icmp COND (VAL1, VAL2)``
    Performs the :ref:`icmp operation <i_icmp>` on constants.
``fcmp COND (VAL1, VAL2)``
    Performs the :ref:`fcmp operation <i_fcmp>` on constants.
``extractelement (VAL, IDX)``
    Perform the :ref:`extractelement operation <i_extractelement>` on
    constants.
``insertelement (VAL, ELT, IDX)``
    Perform the :ref:`insertelement operation <i_insertelement>` on
    constants.
``shufflevector (VEC1, VEC2, IDXMASK)``
    Perform the :ref:`shufflevector operation <i_shufflevector>` on
    constants.
``extractvalue (VAL, IDX0, IDX1, ...)``
    Perform the :ref:`extractvalue operation <i_extractvalue>` on
    constants. The index list is interpreted in a similar manner as
    indices in a ':ref:`getelementptr <i_getelementptr>`' operation. At
    least one index value must be specified.
``insertvalue (VAL, ELT, IDX0, IDX1, ...)``
    Perform the :ref:`insertvalue operation <i_insertvalue>` on constants.
    The index list is interpreted in a similar manner as indices in a
    ':ref:`getelementptr <i_getelementptr>`' operation. At least one index
    value must be specified.
``OPCODE (LHS, RHS)``
    Perform the specified operation of the LHS and RHS constants. OPCODE
    may be any of the :ref:`binary <binaryops>` or :ref:`bitwise
    binary <bitwiseops>` operations. The constraints on operands are
    the same as those for the corresponding instruction (e.g. no bitwise
    operations on floating point values are allowed).

Other Values
============

.. _inlineasmexprs:

Inline Assembler Expressions
----------------------------

LLVM supports inline assembler expressions (as opposed to :ref:`Module-Level
Inline Assembly <moduleasm>`) through the use of a special value. This value
represents the inline assembler as a template string (containing the
instructions to emit), a list of operand constraints (stored as a string), a
flag that indicates whether or not the inline asm expression has side effects,
and a flag indicating whether the function containing the asm needs to align its
stack conservatively.

The template string supports argument substitution of the operands using "``$``"
followed by a number, to indicate substitution of the given register/memory
location, as specified by the constraint string. "``${NUM:MODIFIER}``" may also
be used, where ``MODIFIER`` is a target-specific annotation for how to print the
operand (See :ref:`inline-asm-modifiers`).

A literal "``$``" may be included by using "``$$``" in the template. To include
other special characters into the output, the usual "``\XX``" escapes may be
used, just as in other strings. Note that after template substitution, the
resulting assembly string is parsed by LLVM's integrated assembler unless it is
disabled -- even when emitting a ``.s`` file -- and thus must contain assembly
syntax known to LLVM.

LLVM's support for inline asm is modeled closely on the requirements of Clang's
GCC-compatible inline-asm support. Thus, the feature-set and the constraint and
modifier codes listed here are similar or identical to those in GCC's inline asm
support. However, to be clear, the syntax of the template and constraint strings
described here is *not* the same as the syntax accepted by GCC and Clang, and,
while most constraint letters are passed through as-is by Clang, some get
translated to other codes when converting from the C source to the LLVM
assembly.

An example inline assembler expression is:

.. code-block:: llvm

    i32 (i32) asm "bswap $0", "=r,r"

Inline assembler expressions may **only** be used as the callee operand
of a :ref:`call <i_call>` or an :ref:`invoke <i_invoke>` instruction.
Thus, typically we have:

.. code-block:: llvm

    %X = call i32 asm "bswap $0", "=r,r"(i32 %Y)

Inline asms with side effects not visible in the constraint list must be
marked as having side effects. This is done through the use of the
'``sideeffect``' keyword, like so:

.. code-block:: llvm

    call void asm sideeffect "eieio", ""()

In some cases inline asms will contain code that will not work unless
the stack is aligned in some way, such as calls or SSE instructions on
x86, yet will not contain code that does that alignment within the asm.
The compiler should make conservative assumptions about what the asm
might contain and should generate its usual stack alignment code in the
prologue if the '``alignstack``' keyword is present:

.. code-block:: llvm

    call void asm alignstack "eieio", ""()

Inline asms also support using non-standard assembly dialects. The
assumed dialect is ATT. When the '``inteldialect``' keyword is present,
the inline asm is using the Intel dialect. Currently, ATT and Intel are
the only supported dialects. An example is:

.. code-block:: llvm

    call void asm inteldialect "eieio", ""()

If multiple keywords appear the '``sideeffect``' keyword must come
first, the '``alignstack``' keyword second and the '``inteldialect``'
keyword last.

Inline Asm Constraint String
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The constraint list is a comma-separated string, each element containing one or
more constraint codes.

For each element in the constraint list an appropriate register or memory
operand will be chosen, and it will be made available to assembly template
string expansion as ``$0`` for the first constraint in the list, ``$1`` for the
second, etc.

There are three different types of constraints, which are distinguished by a
prefix symbol in front of the constraint code: Output, Input, and Clobber. The
constraints must always be given in that order: outputs first, then inputs, then
clobbers. They cannot be intermingled.

There are also three different categories of constraint codes:

- Register constraint. This is either a register class, or a fixed physical
  register. This kind of constraint will allocate a register, and if necessary,
  bitcast the argument or result to the appropriate type.
- Memory constraint. This kind of constraint is for use with an instruction
  taking a memory operand. Different constraints allow for different addressing
  modes used by the target.
- Immediate value constraint. This kind of constraint is for an integer or other
  immediate value which can be rendered directly into an instruction. The
  various target-specific constraints allow the selection of a value in the
  proper range for the instruction you wish to use it with.

Output constraints
""""""""""""""""""

Output constraints are specified by an "``=``" prefix (e.g. "``=r``"). This
indicates that the assembly will write to this operand, and the operand will
then be made available as a return value of the ``asm`` expression. Output
constraints do not consume an argument from the call instruction. (Except, see
below about indirect outputs).

Normally, it is expected that no output locations are written to by the assembly
expression until *all* of the inputs have been read. As such, LLVM may assign
the same register to an output and an input. If this is not safe (e.g. if the
assembly contains two instructions, where the first writes to one output, and
the second reads an input and writes to a second output), then the "``&``"
modifier must be used (e.g. "``=&r``") to specify that the output is an
"early-clobber" output. Marking an ouput as "early-clobber" ensures that LLVM
will not use the same register for any inputs (other than an input tied to this
output).

Input constraints
"""""""""""""""""

Input constraints do not have a prefix -- just the constraint codes. Each input
constraint will consume one argument from the call instruction. It is not
permitted for the asm to write to any input register or memory location (unless
that input is tied to an output). Note also that multiple inputs may all be
assigned to the same register, if LLVM can determine that they necessarily all
contain the same value.

Instead of providing a Constraint Code, input constraints may also "tie"
themselves to an output constraint, by providing an integer as the constraint
string. Tied inputs still consume an argument from the call instruction, and
take up a position in the asm template numbering as is usual -- they will simply
be constrained to always use the same register as the output they've been tied
to. For example, a constraint string of "``=r,0``" says to assign a register for
output, and use that register as an input as well (it being the 0'th
constraint).

It is permitted to tie an input to an "early-clobber" output. In that case, no
*other* input may share the same register as the input tied to the early-clobber
(even when the other input has the same value).

You may only tie an input to an output which has a register constraint, not a
memory constraint. Only a single input may be tied to an output.

There is also an "interesting" feature which deserves a bit of explanation: if a
register class constraint allocates a register which is too small for the value
type operand provided as input, the input value will be split into multiple
registers, and all of them passed to the inline asm.

However, this feature is often not as useful as you might think.

Firstly, the registers are *not* guaranteed to be consecutive. So, on those
architectures that have instructions which operate on multiple consecutive
instructions, this is not an appropriate way to support them. (e.g. the 32-bit
SparcV8 has a 64-bit load, which instruction takes a single 32-bit register. The
hardware then loads into both the named register, and the next register. This
feature of inline asm would not be useful to support that.)

A few of the targets provide a template string modifier allowing explicit access
to the second register of a two-register operand (e.g. MIPS ``L``, ``M``, and
``D``). On such an architecture, you can actually access the second allocated
register (yet, still, not any subsequent ones). But, in that case, you're still
probably better off simply splitting the value into two separate operands, for
clarity. (e.g. see the description of the ``A`` constraint on X86, which,
despite existing only for use with this feature, is not really a good idea to
use)

Indirect inputs and outputs
"""""""""""""""""""""""""""

Indirect output or input constraints can be specified by the "``*``" modifier
(which goes after the "``=``" in case of an output). This indicates that the asm
will write to or read from the contents of an *address* provided as an input
argument. (Note that in this way, indirect outputs act more like an *input* than
an output: just like an input, they consume an argument of the call expression,
rather than producing a return value. An indirect output constraint is an
"output" only in that the asm is expected to write to the contents of the input
memory location, instead of just read from it).

This is most typically used for memory constraint, e.g. "``=*m``", to pass the
address of a variable as a value.

It is also possible to use an indirect *register* constraint, but only on output
(e.g. "``=*r``"). This will cause LLVM to allocate a register for an output
value normally, and then, separately emit a store to the address provided as
input, after the provided inline asm. (It's not clear what value this
functionality provides, compared to writing the store explicitly after the asm
statement, and it can only produce worse code, since it bypasses many
optimization passes. I would recommend not using it.)


Clobber constraints
"""""""""""""""""""

A clobber constraint is indicated by a "``~``" prefix. A clobber does not
consume an input operand, nor generate an output. Clobbers cannot use any of the
general constraint code letters -- they may use only explicit register
constraints, e.g. "``~{eax}``". The one exception is that a clobber string of
"``~{memory}``" indicates that the assembly writes to arbitrary undeclared
memory locations -- not only the memory pointed to by a declared indirect
output.


Constraint Codes
""""""""""""""""
After a potential prefix comes constraint code, or codes.

A Constraint Code is either a single letter (e.g. "``r``"), a "``^``" character
followed by two letters (e.g. "``^wc``"), or "``{``" register-name "``}``"
(e.g. "``{eax}``").

The one and two letter constraint codes are typically chosen to be the same as
GCC's constraint codes.

A single constraint may include one or more than constraint code in it, leaving
it up to LLVM to choose which one to use. This is included mainly for
compatibility with the translation of GCC inline asm coming from clang.

There are two ways to specify alternatives, and either or both may be used in an
inline asm constraint list:

1) Append the codes to each other, making a constraint code set. E.g. "``im``"
   or "``{eax}m``". This means "choose any of the options in the set". The
   choice of constraint is made independently for each constraint in the
   constraint list.

2) Use "``|``" between constraint code sets, creating alternatives. Every
   constraint in the constraint list must have the same number of alternative
   sets. With this syntax, the same alternative in *all* of the items in the
   constraint list will be chosen together.

Putting those together, you might have a two operand constraint string like
``"rm|r,ri|rm"``. This indicates that if operand 0 is ``r`` or ``m``, then
operand 1 may be one of ``r`` or ``i``. If operand 0 is ``r``, then operand 1
may be one of ``r`` or ``m``. But, operand 0 and 1 cannot both be of type m.

However, the use of either of the alternatives features is *NOT* recommended, as
LLVM is not able to make an intelligent choice about which one to use. (At the
point it currently needs to choose, not enough information is available to do so
in a smart way.) Thus, it simply tries to make a choice that's most likely to
compile, not one that will be optimal performance. (e.g., given "``rm``", it'll
always choose to use memory, not registers). And, if given multiple registers,
or multiple register classes, it will simply choose the first one. (In fact, it
doesn't currently even ensure explicitly specified physical registers are
unique, so specifying multiple physical registers as alternatives, like
``{r11}{r12},{r11}{r12}``, will assign r11 to both operands, not at all what was
intended.)

Supported Constraint Code List
""""""""""""""""""""""""""""""

The constraint codes are, in general, expected to behave the same way they do in
GCC. LLVM's support is often implemented on an 'as-needed' basis, to support C
inline asm code which was supported by GCC. A mismatch in behavior between LLVM
and GCC likely indicates a bug in LLVM.

Some constraint codes are typically supported by all targets:

- ``r``: A register in the target's general purpose register class.
- ``m``: A memory address operand. It is target-specific what addressing modes
  are supported, typical examples are register, or register + register offset,
  or register + immediate offset (of some target-specific size).
- ``i``: An integer constant (of target-specific width). Allows either a simple
  immediate, or a relocatable value.
- ``n``: An integer constant -- *not* including relocatable values.
- ``s``: An integer constant, but allowing *only* relocatable values.
- ``X``: Allows an operand of any kind, no constraint whatsoever. Typically
  useful to pass a label for an asm branch or call.

  .. FIXME: but that surely isn't actually okay to jump out of an asm
     block without telling llvm about the control transfer???)

- ``{register-name}``: Requires exactly the named physical register.

Other constraints are target-specific:

AArch64:

- ``z``: An immediate integer 0. Outputs ``WZR`` or ``XZR``, as appropriate.
- ``I``: An immediate integer valid for an ``ADD`` or ``SUB`` instruction,
  i.e. 0 to 4095 with optional shift by 12.
- ``J``: An immediate integer that, when negated, is valid for an ``ADD`` or
  ``SUB`` instruction, i.e. -1 to -4095 with optional left shift by 12.
- ``K``: An immediate integer that is valid for the 'bitmask immediate 32' of a
  logical instruction like ``AND``, ``EOR``, or ``ORR`` with a 32-bit register.
- ``L``: An immediate integer that is valid for the 'bitmask immediate 64' of a
  logical instruction like ``AND``, ``EOR``, or ``ORR`` with a 64-bit register.
- ``M``: An immediate integer for use with the ``MOV`` assembly alias on a
  32-bit register. This is a superset of ``K``: in addition to the bitmask
  immediate, also allows immediate integers which can be loaded with a single
  ``MOVZ`` or ``MOVL`` instruction.
- ``N``: An immediate integer for use with the ``MOV`` assembly alias on a
  64-bit register. This is a superset of ``L``.
- ``Q``: Memory address operand must be in a single register (no
  offsets). (However, LLVM currently does this for the ``m`` constraint as
  well.)
- ``r``: A 32 or 64-bit integer register (W* or X*).
- ``w``: A 32, 64, or 128-bit floating-point/SIMD register.
- ``x``: A lower 128-bit floating-point/SIMD register (``V0`` to ``V15``).

AMDGPU:

- ``r``: A 32 or 64-bit integer register.
- ``[0-9]v``: The 32-bit VGPR register, number 0-9.
- ``[0-9]s``: The 32-bit SGPR register, number 0-9.


All ARM modes:

- ``Q``, ``Um``, ``Un``, ``Uq``, ``Us``, ``Ut``, ``Uv``, ``Uy``: Memory address
  operand. Treated the same as operand ``m``, at the moment.

ARM and ARM's Thumb2 mode:

- ``j``: An immediate integer between 0 and 65535 (valid for ``MOVW``)
- ``I``: An immediate integer valid for a data-processing instruction.
- ``J``: An immediate integer between -4095 and 4095.
- ``K``: An immediate integer whose bitwise inverse is valid for a
  data-processing instruction. (Can be used with template modifier "``B``" to
  print the inverted value).
- ``L``: An immediate integer whose negation is valid for a data-processing
  instruction. (Can be used with template modifier "``n``" to print the negated
  value).
- ``M``: A power of two or a integer between 0 and 32.
- ``N``: Invalid immediate constraint.
- ``O``: Invalid immediate constraint.
- ``r``: A general-purpose 32-bit integer register (``r0-r15``).
- ``l``: In Thumb2 mode, low 32-bit GPR registers (``r0-r7``). In ARM mode, same
  as ``r``.
- ``h``: In Thumb2 mode, a high 32-bit GPR register (``r8-r15``). In ARM mode,
  invalid.
- ``w``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s31``,
  ``d0-d31``, or ``q0-q15``.
- ``x``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s15``,
  ``d0-d7``, or ``q0-q3``.
- ``t``: A floating-point/SIMD register, only supports 32-bit values:
  ``s0-s31``.

ARM's Thumb1 mode:

- ``I``: An immediate integer between 0 and 255.
- ``J``: An immediate integer between -255 and -1.
- ``K``: An immediate integer between 0 and 255, with optional left-shift by
  some amount.
- ``L``: An immediate integer between -7 and 7.
- ``M``: An immediate integer which is a multiple of 4 between 0 and 1020.
- ``N``: An immediate integer between 0 and 31.
- ``O``: An immediate integer which is a multiple of 4 between -508 and 508.
- ``r``: A low 32-bit GPR register (``r0-r7``).
- ``l``: A low 32-bit GPR register (``r0-r7``).
- ``h``: A high GPR register (``r0-r7``).
- ``w``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s31``,
  ``d0-d31``, or ``q0-q15``.
- ``x``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s15``,
  ``d0-d7``, or ``q0-q3``.
- ``t``: A floating-point/SIMD register, only supports 32-bit values:
  ``s0-s31``.


Hexagon:

- ``o``, ``v``: A memory address operand, treated the same as constraint ``m``,
  at the moment.
- ``r``: A 32 or 64-bit register.

MSP430:

- ``r``: An 8 or 16-bit register.

MIPS:

- ``I``: An immediate signed 16-bit integer.
- ``J``: An immediate integer zero.
- ``K``: An immediate unsigned 16-bit integer.
- ``L``: An immediate 32-bit integer, where the lower 16 bits are 0.
- ``N``: An immediate integer between -65535 and -1.
- ``O``: An immediate signed 15-bit integer.
- ``P``: An immediate integer between 1 and 65535.
- ``m``: A memory address operand. In MIPS-SE mode, allows a base address
  register plus 16-bit immediate offset. In MIPS mode, just a base register.
- ``R``: A memory address operand. In MIPS-SE mode, allows a base address
  register plus a 9-bit signed offset. In MIPS mode, the same as constraint
  ``m``.
- ``ZC``: A memory address operand, suitable for use in a ``pref``, ``ll``, or
  ``sc`` instruction on the given subtarget (details vary).
- ``r``, ``d``,  ``y``: A 32 or 64-bit GPR register.
- ``f``: A 32 or 64-bit FPU register (``F0-F31``), or a 128-bit MSA register
  (``W0-W31``). In the case of MSA registers, it is recommended to use the ``w``
  argument modifier for compatibility with GCC.
- ``c``: A 32-bit or 64-bit GPR register suitable for indirect jump (always
  ``25``).
- ``l``: The ``lo`` register, 32 or 64-bit.
- ``x``: Invalid.

NVPTX:

- ``b``: A 1-bit integer register.
- ``c`` or ``h``: A 16-bit integer register.
- ``r``: A 32-bit integer register.
- ``l`` or ``N``: A 64-bit integer register.
- ``f``: A 32-bit float register.
- ``d``: A 64-bit float register.


PowerPC:

- ``I``: An immediate signed 16-bit integer.
- ``J``: An immediate unsigned 16-bit integer, shifted left 16 bits.
- ``K``: An immediate unsigned 16-bit integer.
- ``L``: An immediate signed 16-bit integer, shifted left 16 bits.
- ``M``: An immediate integer greater than 31.
- ``N``: An immediate integer that is an exact power of 2.
- ``O``: The immediate integer constant 0.
- ``P``: An immediate integer constant whose negation is a signed 16-bit
  constant.
- ``es``, ``o``, ``Q``, ``Z``, ``Zy``: A memory address operand, currently
  treated the same as ``m``.
- ``r``: A 32 or 64-bit integer register.
- ``b``: A 32 or 64-bit integer register, excluding ``R0`` (that is:
  ``R1-R31``).
- ``f``: A 32 or 64-bit float register (``F0-F31``), or when QPX is enabled, a
  128 or 256-bit QPX register (``Q0-Q31``; aliases the ``F`` registers).
- ``v``: For ``4 x f32`` or ``4 x f64`` types, when QPX is enabled, a
  128 or 256-bit QPX register (``Q0-Q31``), otherwise a 128-bit
  altivec vector register (``V0-V31``).

  .. FIXME: is this a bug that v accepts QPX registers? I think this
     is supposed to only use the altivec vector registers?

- ``y``: Condition register (``CR0-CR7``).
- ``wc``: An individual CR bit in a CR register.
- ``wa``, ``wd``, ``wf``: Any 128-bit VSX vector register, from the full VSX
  register set (overlapping both the floating-point and vector register files).
- ``ws``: A 32 or 64-bit floating point register, from the full VSX register
  set.

Sparc:

- ``I``: An immediate 13-bit signed integer.
- ``r``: A 32-bit integer register.

SystemZ:

- ``I``: An immediate unsigned 8-bit integer.
- ``J``: An immediate unsigned 12-bit integer.
- ``K``: An immediate signed 16-bit integer.
- ``L``: An immediate signed 20-bit integer.
- ``M``: An immediate integer 0x7fffffff.
- ``Q``, ``R``, ``S``, ``T``: A memory address operand, treated the same as
  ``m``, at the moment.
- ``r`` or ``d``: A 32, 64, or 128-bit integer register.
- ``a``: A 32, 64, or 128-bit integer address register (excludes R0, which in an
  address context evaluates as zero).
- ``h``: A 32-bit value in the high part of a 64bit data register
  (LLVM-specific)
- ``f``: A 32, 64, or 128-bit floating point register.

X86:

- ``I``: An immediate integer between 0 and 31.
- ``J``: An immediate integer between 0 and 64.
- ``K``: An immediate signed 8-bit integer.
- ``L``: An immediate integer, 0xff or 0xffff or (in 64-bit mode only)
  0xffffffff.
- ``M``: An immediate integer between 0 and 3.
- ``N``: An immediate unsigned 8-bit integer.
- ``O``: An immediate integer between 0 and 127.
- ``e``: An immediate 32-bit signed integer.
- ``Z``: An immediate 32-bit unsigned integer.
- ``o``, ``v``: Treated the same as ``m``, at the moment.
- ``q``: An 8, 16, 32, or 64-bit register which can be accessed as an 8-bit
  ``l`` integer register. On X86-32, this is the ``a``, ``b``, ``c``, and ``d``
  registers, and on X86-64, it is all of the integer registers.
- ``Q``: An 8, 16, 32, or 64-bit register which can be accessed as an 8-bit
  ``h`` integer register. This is the ``a``, ``b``, ``c``, and ``d`` registers.
- ``r`` or ``l``: An 8, 16, 32, or 64-bit integer register.
- ``R``: An 8, 16, 32, or 64-bit "legacy" integer register -- one which has
  existed since i386, and can be accessed without the REX prefix.
- ``f``: A 32, 64, or 80-bit '387 FPU stack pseudo-register.
- ``y``: A 64-bit MMX register, if MMX is enabled.
- ``x``: If SSE is enabled: a 32 or 64-bit scalar operand, or 128-bit vector
  operand in a SSE register. If AVX is also enabled, can also be a 256-bit
  vector operand in an AVX register. If AVX-512 is also enabled, can also be a
  512-bit vector operand in an AVX512 register, Otherwise, an error.
- ``Y``: The same as ``x``, if *SSE2* is enabled, otherwise an error.
- ``A``: Special case: allocates EAX first, then EDX, for a single operand (in
  32-bit mode, a 64-bit integer operand will get split into two registers). It
  is not recommended to use this constraint, as in 64-bit mode, the 64-bit
  operand will get allocated only to RAX -- if two 32-bit operands are needed,
  you're better off splitting it yourself, before passing it to the asm
  statement.

XCore:

- ``r``: A 32-bit integer register.


.. _inline-asm-modifiers:

Asm template argument modifiers
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

In the asm template string, modifiers can be used on the operand reference, like
"``${0:n}``".

The modifiers are, in general, expected to behave the same way they do in
GCC. LLVM's support is often implemented on an 'as-needed' basis, to support C
inline asm code which was supported by GCC. A mismatch in behavior between LLVM
and GCC likely indicates a bug in LLVM.

Target-independent:

- ``c``: Print an immediate integer constant unadorned, without
  the target-specific immediate punctuation (e.g. no ``$`` prefix).
- ``n``: Negate and print immediate integer constant unadorned, without the
  target-specific immediate punctuation (e.g. no ``$`` prefix).
- ``l``: Print as an unadorned label, without the target-specific label
  punctuation (e.g. no ``$`` prefix).

AArch64:

- ``w``: Print a GPR register with a ``w*`` name instead of ``x*`` name. E.g.,
  instead of ``x30``, print ``w30``.
- ``x``: Print a GPR register with a ``x*`` name. (this is the default, anyhow).
- ``b``, ``h``, ``s``, ``d``, ``q``: Print a floating-point/SIMD register with a
  ``b*``, ``h*``, ``s*``, ``d*``, or ``q*`` name, rather than the default of
  ``v*``.

AMDGPU:

- ``r``: No effect.

ARM:

- ``a``: Print an operand as an address (with ``[`` and ``]`` surrounding a
  register).
- ``P``: No effect.
- ``q``: No effect.
- ``y``: Print a VFP single-precision register as an indexed double (e.g. print
  as ``d4[1]`` instead of ``s9``)
- ``B``: Bitwise invert and print an immediate integer constant without ``#``
  prefix.
- ``L``: Print the low 16-bits of an immediate integer constant.
- ``M``: Print as a register set suitable for ldm/stm. Also prints *all*
  register operands subsequent to the specified one (!), so use carefully.
- ``Q``: Print the low-order register of a register-pair, or the low-order
  register of a two-register operand.
- ``R``: Print the high-order register of a register-pair, or the high-order
  register of a two-register operand.
- ``H``: Print the second register of a register-pair. (On a big-endian system,
  ``H`` is equivalent to ``Q``, and on little-endian system, ``H`` is equivalent
  to ``R``.)

  .. FIXME: H doesn't currently support printing the second register
     of a two-register operand.

- ``e``: Print the low doubleword register of a NEON quad register.
- ``f``: Print the high doubleword register of a NEON quad register.
- ``m``: Print the base register of a memory operand without the ``[`` and ``]``
  adornment.

Hexagon:

- ``L``: Print the second register of a two-register operand. Requires that it
  has been allocated consecutively to the first.

  .. FIXME: why is it restricted to consecutive ones? And there's
     nothing that ensures that happens, is there?

- ``I``: Print the letter 'i' if the operand is an integer constant, otherwise
  nothing. Used to print 'addi' vs 'add' instructions.

MSP430:

No additional modifiers.

MIPS:

- ``X``: Print an immediate integer as hexadecimal
- ``x``: Print the low 16 bits of an immediate integer as hexadecimal.
- ``d``: Print an immediate integer as decimal.
- ``m``: Subtract one and print an immediate integer as decimal.
- ``z``: Print $0 if an immediate zero, otherwise print normally.
- ``L``: Print the low-order register of a two-register operand, or prints the
  address of the low-order word of a double-word memory operand.

  .. FIXME: L seems to be missing memory operand support.

- ``M``: Print the high-order register of a two-register operand, or prints the
  address of the high-order word of a double-word memory operand.

  .. FIXME: M seems to be missing memory operand support.

- ``D``: Print the second register of a two-register operand, or prints the
  second word of a double-word memory operand. (On a big-endian system, ``D`` is
  equivalent to ``L``, and on little-endian system, ``D`` is equivalent to
  ``M``.)
- ``w``: No effect. Provided for compatibility with GCC which requires this
  modifier in order to print MSA registers (``W0-W31``) with the ``f``
  constraint.

NVPTX:

- ``r``: No effect.

PowerPC:

- ``L``: Print the second register of a two-register operand. Requires that it
  has been allocated consecutively to the first.

  .. FIXME: why is it restricted to consecutive ones? And there's
     nothing that ensures that happens, is there?

- ``I``: Print the letter 'i' if the operand is an integer constant, otherwise
  nothing. Used to print 'addi' vs 'add' instructions.
- ``y``: For a memory operand, prints formatter for a two-register X-form
  instruction. (Currently always prints ``r0,OPERAND``).
- ``U``: Prints 'u' if the memory operand is an update form, and nothing
  otherwise. (NOTE: LLVM does not support update form, so this will currently
  always print nothing)
- ``X``: Prints 'x' if the memory operand is an indexed form. (NOTE: LLVM does
  not support indexed form, so this will currently always print nothing)

Sparc:

- ``r``: No effect.

SystemZ:

SystemZ implements only ``n``, and does *not* support any of the other
target-independent modifiers.

X86:

- ``c``: Print an unadorned integer or symbol name. (The latter is
  target-specific behavior for this typically target-independent modifier).
- ``A``: Print a register name with a '``*``' before it.
- ``b``: Print an 8-bit register name (e.g. ``al``); do nothing on a memory
  operand.
- ``h``: Print the upper 8-bit register name (e.g. ``ah``); do nothing on a
  memory operand.
- ``w``: Print the 16-bit register name (e.g. ``ax``); do nothing on a memory
  operand.
- ``k``: Print the 32-bit register name (e.g. ``eax``); do nothing on a memory
  operand.
- ``q``: Print the 64-bit register name (e.g. ``rax``), if 64-bit registers are
  available, otherwise the 32-bit register name; do nothing on a memory operand.
- ``n``: Negate and print an unadorned integer, or, for operands other than an
  immediate integer (e.g. a relocatable symbol expression), print a '-' before
  the operand. (The behavior for relocatable symbol expressions is a
  target-specific behavior for this typically target-independent modifier)
- ``H``: Print a memory reference with additional offset +8.
- ``P``: Print a memory reference or operand for use as the argument of a call
  instruction. (E.g. omit ``(rip)``, even though it's PC-relative.)

XCore:

No additional modifiers.


Inline Asm Metadata
^^^^^^^^^^^^^^^^^^^

The call instructions that wrap inline asm nodes may have a
"``!srcloc``" MDNode attached to it that contains a list of constant
integers. If present, the code generator will use the integer as the
location cookie value when report errors through the ``LLVMContext``
error reporting mechanisms. This allows a front-end to correlate backend
errors that occur with inline asm back to the source code that produced
it. For example:

.. code-block:: llvm

    call void asm sideeffect "something bad", ""(), !srcloc !42
    ...
    !42 = !{ i32 1234567 }

It is up to the front-end to make sense of the magic numbers it places
in the IR. If the MDNode contains multiple constants, the code generator
will use the one that corresponds to the line of the asm that the error
occurs on.

.. _metadata:

Metadata
========

LLVM IR allows metadata to be attached to instructions in the program
that can convey extra information about the code to the optimizers and
code generator. One example application of metadata is source-level
debug information. There are two metadata primitives: strings and nodes.

Metadata does not have a type, and is not a value. If referenced from a
``call`` instruction, it uses the ``metadata`` type.

All metadata are identified in syntax by a exclamation point ('``!``').

.. _metadata-string:

Metadata Nodes and Metadata Strings
-----------------------------------

A metadata string is a string surrounded by double quotes. It can
contain any character by escaping non-printable characters with
"``\xx``" where "``xx``" is the two digit hex code. For example:
"``!"test\00"``".

Metadata nodes are represented with notation similar to structure
constants (a comma separated list of elements, surrounded by braces and
preceded by an exclamation point). Metadata nodes can have any values as
their operand. For example:

.. code-block:: llvm

    !{ !"test\00", i32 10}

Metadata nodes that aren't uniqued use the ``distinct`` keyword. For example:

.. code-block:: llvm

    !0 = distinct !{!"test\00", i32 10}

``distinct`` nodes are useful when nodes shouldn't be merged based on their
content. They can also occur when transformations cause uniquing collisions
when metadata operands change.

A :ref:`named metadata <namedmetadatastructure>` is a collection of
metadata nodes, which can be looked up in the module symbol table. For
example:

.. code-block:: llvm

    !foo = !{!4, !3}

Metadata can be used as function arguments. Here ``llvm.dbg.value``
function is using two metadata arguments:

.. code-block:: llvm

    call void @llvm.dbg.value(metadata !24, i64 0, metadata !25)

Metadata can be attached with an instruction. Here metadata ``!21`` is
attached to the ``add`` instruction using the ``!dbg`` identifier:

.. code-block:: llvm

    %indvar.next = add i64 %indvar, 1, !dbg !21

More information about specific metadata nodes recognized by the
optimizers and code generator is found below.

.. _specialized-metadata:

Specialized Metadata Nodes
^^^^^^^^^^^^^^^^^^^^^^^^^^

Specialized metadata nodes are custom data structures in metadata (as opposed
to generic tuples). Their fields are labelled, and can be specified in any
order.

These aren't inherently debug info centric, but currently all the specialized
metadata nodes are related to debug info.

.. _DICompileUnit:

DICompileUnit
"""""""""""""

``DICompileUnit`` nodes represent a compile unit. The ``enums:``,
``retainedTypes:``, ``subprograms:``, ``globals:`` and ``imports:`` fields are
tuples containing the debug info to be emitted along with the compile unit,
regardless of code optimizations (some nodes are only emitted if there are
references to them from instructions).

.. code-block:: llvm

    !0 = !DICompileUnit(language: DW_LANG_C99, file: !1, producer: "clang",
                        isOptimized: true, flags: "-O2", runtimeVersion: 2,
                        splitDebugFilename: "abc.debug", emissionKind: 1,
                        enums: !2, retainedTypes: !3, subprograms: !4,
                        globals: !5, imports: !6)

Compile unit descriptors provide the root scope for objects declared in a
specific compilation unit. File descriptors are defined using this scope.
These descriptors are collected by a named metadata ``!llvm.dbg.cu``. They
keep track of subprograms, global variables, type information, and imported
entities (declarations and namespaces).

.. _DIFile:

DIFile
""""""

``DIFile`` nodes represent files. The ``filename:`` can include slashes.

.. code-block:: llvm

    !0 = !DIFile(filename: "path/to/file", directory: "/path/to/dir")

Files are sometimes used in ``scope:`` fields, and are the only valid target
for ``file:`` fields.

.. _DIBasicType:

DIBasicType
"""""""""""

``DIBasicType`` nodes represent primitive types, such as ``int``, ``bool`` and
``float``. ``tag:`` defaults to ``DW_TAG_base_type``.

.. code-block:: llvm

    !0 = !DIBasicType(name: "unsigned char", size: 8, align: 8,
                      encoding: DW_ATE_unsigned_char)
    !1 = !DIBasicType(tag: DW_TAG_unspecified_type, name: "decltype(nullptr)")

The ``encoding:`` describes the details of the type. Usually it's one of the
following:

.. code-block:: llvm

  DW_ATE_address       = 1
  DW_ATE_boolean       = 2
  DW_ATE_float         = 4
  DW_ATE_signed        = 5
  DW_ATE_signed_char   = 6
  DW_ATE_unsigned      = 7
  DW_ATE_unsigned_char = 8

.. _DISubroutineType:

DISubroutineType
""""""""""""""""

``DISubroutineType`` nodes represent subroutine types. Their ``types:`` field
refers to a tuple; the first operand is the return type, while the rest are the
types of the formal arguments in order. If the first operand is ``null``, that
represents a function with no return value (such as ``void foo() {}`` in C++).

.. code-block:: llvm

    !0 = !BasicType(name: "int", size: 32, align: 32, DW_ATE_signed)
    !1 = !BasicType(name: "char", size: 8, align: 8, DW_ATE_signed_char)
    !2 = !DISubroutineType(types: !{null, !0, !1}) ; void (int, char)

.. _DIDerivedType:

DIDerivedType
"""""""""""""

``DIDerivedType`` nodes represent types derived from other types, such as
qualified types.

.. code-block:: llvm

    !0 = !DIBasicType(name: "unsigned char", size: 8, align: 8,
                      encoding: DW_ATE_unsigned_char)
    !1 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !0, size: 32,
                        align: 32)

The following ``tag:`` values are valid:

.. code-block:: llvm

  DW_TAG_formal_parameter   = 5
  DW_TAG_member             = 13
  DW_TAG_pointer_type       = 15
  DW_TAG_reference_type     = 16
  DW_TAG_typedef            = 22
  DW_TAG_ptr_to_member_type = 31
  DW_TAG_const_type         = 38
  DW_TAG_volatile_type      = 53
  DW_TAG_restrict_type      = 55

``DW_TAG_member`` is used to define a member of a :ref:`composite type
<DICompositeType>` or :ref:`subprogram <DISubprogram>`. The type of the member
is the ``baseType:``. The ``offset:`` is the member's bit offset.
``DW_TAG_formal_parameter`` is used to define a member which is a formal
argument of a subprogram.

``DW_TAG_typedef`` is used to provide a name for the ``baseType:``.

``DW_TAG_pointer_type``, ``DW_TAG_reference_type``, ``DW_TAG_const_type``,
``DW_TAG_volatile_type`` and ``DW_TAG_restrict_type`` are used to qualify the
``baseType:``.

Note that the ``void *`` type is expressed as a type derived from NULL.

.. _DICompositeType:

DICompositeType
"""""""""""""""

``DICompositeType`` nodes represent types composed of other types, like
structures and unions. ``elements:`` points to a tuple of the composed types.

If the source language supports ODR, the ``identifier:`` field gives the unique
identifier used for type merging between modules. When specified, other types
can refer to composite types indirectly via a :ref:`metadata string
<metadata-string>` that matches their identifier.

.. code-block:: llvm

    !0 = !DIEnumerator(name: "SixKind", value: 7)
    !1 = !DIEnumerator(name: "SevenKind", value: 7)
    !2 = !DIEnumerator(name: "NegEightKind", value: -8)
    !3 = !DICompositeType(tag: DW_TAG_enumeration_type, name: "Enum", file: !12,
                          line: 2, size: 32, align: 32, identifier: "_M4Enum",
                          elements: !{!0, !1, !2})

The following ``tag:`` values are valid:

.. code-block:: llvm

  DW_TAG_array_type       = 1
  DW_TAG_class_type       = 2
  DW_TAG_enumeration_type = 4
  DW_TAG_structure_type   = 19
  DW_TAG_union_type       = 23
  DW_TAG_subroutine_type  = 21
  DW_TAG_inheritance      = 28


For ``DW_TAG_array_type``, the ``elements:`` should be :ref:`subrange
descriptors <DISubrange>`, each representing the range of subscripts at that
level of indexing. The ``DIFlagVector`` flag to ``flags:`` indicates that an
array type is a native packed vector.

For ``DW_TAG_enumeration_type``, the ``elements:`` should be :ref:`enumerator
descriptors <DIEnumerator>`, each representing the definition of an enumeration
value for the set. All enumeration type descriptors are collected in the
``enums:`` field of the :ref:`compile unit <DICompileUnit>`.

For ``DW_TAG_structure_type``, ``DW_TAG_class_type``, and
``DW_TAG_union_type``, the ``elements:`` should be :ref:`derived types
<DIDerivedType>` with ``tag: DW_TAG_member`` or ``tag: DW_TAG_inheritance``.

.. _DISubrange:

DISubrange
""""""""""

``DISubrange`` nodes are the elements for ``DW_TAG_array_type`` variants of
:ref:`DICompositeType`. ``count: -1`` indicates an empty array.

.. code-block:: llvm

    !0 = !DISubrange(count: 5, lowerBound: 0) ; array counting from 0
    !1 = !DISubrange(count: 5, lowerBound: 1) ; array counting from 1
    !2 = !DISubrange(count: -1) ; empty array.

.. _DIEnumerator:

DIEnumerator
""""""""""""

``DIEnumerator`` nodes are the elements for ``DW_TAG_enumeration_type``
variants of :ref:`DICompositeType`.

.. code-block:: llvm

    !0 = !DIEnumerator(name: "SixKind", value: 7)
    !1 = !DIEnumerator(name: "SevenKind", value: 7)
    !2 = !DIEnumerator(name: "NegEightKind", value: -8)

DITemplateTypeParameter
"""""""""""""""""""""""

``DITemplateTypeParameter`` nodes represent type parameters to generic source
language constructs. They are used (optionally) in :ref:`DICompositeType` and
:ref:`DISubprogram` ``templateParams:`` fields.

.. code-block:: llvm

    !0 = !DITemplateTypeParameter(name: "Ty", type: !1)

DITemplateValueParameter
""""""""""""""""""""""""

``DITemplateValueParameter`` nodes represent value parameters to generic source
language constructs. ``tag:`` defaults to ``DW_TAG_template_value_parameter``,
but if specified can also be set to ``DW_TAG_GNU_template_template_param`` or
``DW_TAG_GNU_template_param_pack``. They are used (optionally) in
:ref:`DICompositeType` and :ref:`DISubprogram` ``templateParams:`` fields.

.. code-block:: llvm

    !0 = !DITemplateValueParameter(name: "Ty", type: !1, value: i32 7)

DINamespace
"""""""""""

``DINamespace`` nodes represent namespaces in the source language.

.. code-block:: llvm

    !0 = !DINamespace(name: "myawesomeproject", scope: !1, file: !2, line: 7)

DIGlobalVariable
""""""""""""""""

``DIGlobalVariable`` nodes represent global variables in the source language.

.. code-block:: llvm

    !0 = !DIGlobalVariable(name: "foo", linkageName: "foo", scope: !1,
                           file: !2, line: 7, type: !3, isLocal: true,
                           isDefinition: false, variable: i32* @foo,
                           declaration: !4)

All global variables should be referenced by the `globals:` field of a
:ref:`compile unit <DICompileUnit>`.

.. _DISubprogram:

DISubprogram
""""""""""""

``DISubprogram`` nodes represent functions from the source language. The
``variables:`` field points at :ref:`variables <DILocalVariable>` that must be
retained, even if their IR counterparts are optimized out of the IR. The
``type:`` field must point at an :ref:`DISubroutineType`.

.. code-block:: llvm

    !0 = !DISubprogram(name: "foo", linkageName: "_Zfoov", scope: !1,
                       file: !2, line: 7, type: !3, isLocal: true,
                       isDefinition: false, scopeLine: 8, containingType: !4,
                       virtuality: DW_VIRTUALITY_pure_virtual, virtualIndex: 10,
                       flags: DIFlagPrototyped, isOptimized: true,
                       function: void ()* @_Z3foov,
                       templateParams: !5, declaration: !6, variables: !7)

.. _DILexicalBlock:

DILexicalBlock
""""""""""""""

``DILexicalBlock`` nodes describe nested blocks within a :ref:`subprogram
<DISubprogram>`. The line number and column numbers are used to dinstinguish
two lexical blocks at same depth. They are valid targets for ``scope:``
fields.

.. code-block:: llvm

    !0 = distinct !DILexicalBlock(scope: !1, file: !2, line: 7, column: 35)

Usually lexical blocks are ``distinct`` to prevent node merging based on
operands.

.. _DILexicalBlockFile:

DILexicalBlockFile
""""""""""""""""""

``DILexicalBlockFile`` nodes are used to discriminate between sections of a
:ref:`lexical block <DILexicalBlock>`. The ``file:`` field can be changed to
indicate textual inclusion, or the ``discriminator:`` field can be used to
discriminate between control flow within a single block in the source language.

.. code-block:: llvm

    !0 = !DILexicalBlock(scope: !3, file: !4, line: 7, column: 35)
    !1 = !DILexicalBlockFile(scope: !0, file: !4, discriminator: 0)
    !2 = !DILexicalBlockFile(scope: !0, file: !4, discriminator: 1)

.. _DILocation:

DILocation
""""""""""

``DILocation`` nodes represent source debug locations. The ``scope:`` field is
mandatory, and points at an :ref:`DILexicalBlockFile`, an
:ref:`DILexicalBlock`, or an :ref:`DISubprogram`.

.. code-block:: llvm

    !0 = !DILocation(line: 2900, column: 42, scope: !1, inlinedAt: !2)

.. _DILocalVariable:

DILocalVariable
"""""""""""""""

``DILocalVariable`` nodes represent local variables in the source language. If
the ``arg:`` field is set to non-zero, then this variable is a subprogram
parameter, and it will be included in the ``variables:`` field of its
:ref:`DISubprogram`.

.. code-block:: llvm

    !0 = !DILocalVariable(name: "this", arg: 1, scope: !3, file: !2, line: 7,
                          type: !3, flags: DIFlagArtificial)
    !1 = !DILocalVariable(name: "x", arg: 2, scope: !4, file: !2, line: 7,
                          type: !3)
    !2 = !DILocalVariable(name: "y", scope: !5, file: !2, line: 7, type: !3)

DIExpression
""""""""""""

``DIExpression`` nodes represent DWARF expression sequences. They are used in
:ref:`debug intrinsics<dbg_intrinsics>` (such as ``llvm.dbg.declare``) to
describe how the referenced LLVM variable relates to the source language
variable.

The current supported vocabulary is limited:

- ``DW_OP_deref`` dereferences the working expression.
- ``DW_OP_plus, 93`` adds ``93`` to the working expression.
- ``DW_OP_bit_piece, 16, 8`` specifies the offset and size (``16`` and ``8``
  here, respectively) of the variable piece from the working expression.

.. code-block:: llvm

    !0 = !DIExpression(DW_OP_deref)
    !1 = !DIExpression(DW_OP_plus, 3)
    !2 = !DIExpression(DW_OP_bit_piece, 3, 7)
    !3 = !DIExpression(DW_OP_deref, DW_OP_plus, 3, DW_OP_bit_piece, 3, 7)

DIObjCProperty
""""""""""""""

``DIObjCProperty`` nodes represent Objective-C property nodes.

.. code-block:: llvm

    !3 = !DIObjCProperty(name: "foo", file: !1, line: 7, setter: "setFoo",
                         getter: "getFoo", attributes: 7, type: !2)

DIImportedEntity
""""""""""""""""

``DIImportedEntity`` nodes represent entities (such as modules) imported into a
compile unit.

.. code-block:: llvm

   !2 = !DIImportedEntity(tag: DW_TAG_imported_module, name: "foo", scope: !0,
                          entity: !1, line: 7)

'``tbaa``' Metadata
^^^^^^^^^^^^^^^^^^^

In LLVM IR, memory does not have types, so LLVM's own type system is not
suitable for doing TBAA. Instead, metadata is added to the IR to
describe a type system of a higher level language. This can be used to
implement typical C/C++ TBAA, but it can also be used to implement
custom alias analysis behavior for other languages.

The current metadata format is very simple. TBAA metadata nodes have up
to three fields, e.g.:

.. code-block:: llvm

    !0 = !{ !"an example type tree" }
    !1 = !{ !"int", !0 }
    !2 = !{ !"float", !0 }
    !3 = !{ !"const float", !2, i64 1 }

The first field is an identity field. It can be any value, usually a
metadata string, which uniquely identifies the type. The most important
name in the tree is the name of the root node. Two trees with different
root node names are entirely disjoint, even if they have leaves with
common names.

The second field identifies the type's parent node in the tree, or is
null or omitted for a root node. A type is considered to alias all of
its descendants and all of its ancestors in the tree. Also, a type is
considered to alias all types in other trees, so that bitcode produced
from multiple front-ends is handled conservatively.

If the third field is present, it's an integer which if equal to 1
indicates that the type is "constant" (meaning
``pointsToConstantMemory`` should return true; see `other useful
AliasAnalysis methods <AliasAnalysis.html#OtherItfs>`_).

'``tbaa.struct``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^

The :ref:`llvm.memcpy <int_memcpy>` is often used to implement
aggregate assignment operations in C and similar languages, however it
is defined to copy a contiguous region of memory, which is more than
strictly necessary for aggregate types which contain holes due to
padding. Also, it doesn't contain any TBAA information about the fields
of the aggregate.

``!tbaa.struct`` metadata can describe which memory subregions in a
memcpy are padding and what the TBAA tags of the struct are.

The current metadata format is very simple. ``!tbaa.struct`` metadata
nodes are a list of operands which are in conceptual groups of three.
For each group of three, the first operand gives the byte offset of a
field in bytes, the second gives its size in bytes, and the third gives
its tbaa tag. e.g.:

.. code-block:: llvm

    !4 = !{ i64 0, i64 4, !1, i64 8, i64 4, !2 }

This describes a struct with two fields. The first is at offset 0 bytes
with size 4 bytes, and has tbaa tag !1. The second is at offset 8 bytes
and has size 4 bytes and has tbaa tag !2.

Note that the fields need not be contiguous. In this example, there is a
4 byte gap between the two fields. This gap represents padding which
does not carry useful data and need not be preserved.

'``noalias``' and '``alias.scope``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

``noalias`` and ``alias.scope`` metadata provide the ability to specify generic
noalias memory-access sets. This means that some collection of memory access
instructions (loads, stores, memory-accessing calls, etc.) that carry
``noalias`` metadata can specifically be specified not to alias with some other
collection of memory access instructions that carry ``alias.scope`` metadata.
Each type of metadata specifies a list of scopes where each scope has an id and
a domain. When evaluating an aliasing query, if for some domain, the set
of scopes with that domain in one instruction's ``alias.scope`` list is a
subset of (or equal to) the set of scopes for that domain in another
instruction's ``noalias`` list, then the two memory accesses are assumed not to
alias.

The metadata identifying each domain is itself a list containing one or two
entries. The first entry is the name of the domain. Note that if the name is a
string then it can be combined accross functions and translation units. A
self-reference can be used to create globally unique domain names. A
descriptive string may optionally be provided as a second list entry.

The metadata identifying each scope is also itself a list containing two or
three entries. The first entry is the name of the scope. Note that if the name
is a string then it can be combined accross functions and translation units. A
self-reference can be used to create globally unique scope names. A metadata
reference to the scope's domain is the second entry. A descriptive string may
optionally be provided as a third list entry.

For example,

.. code-block:: llvm

    ; Two scope domains:
    !0 = !{!0}
    !1 = !{!1}

    ; Some scopes in these domains:
    !2 = !{!2, !0}
    !3 = !{!3, !0}
    !4 = !{!4, !1}

    ; Some scope lists:
    !5 = !{!4} ; A list containing only scope !4
    !6 = !{!4, !3, !2}
    !7 = !{!3}

    ; These two instructions don't alias:
    %0 = load float, float* %c, align 4, !alias.scope !5
    store float %0, float* %arrayidx.i, align 4, !noalias !5

    ; These two instructions also don't alias (for domain !1, the set of scopes
    ; in the !alias.scope equals that in the !noalias list):
    %2 = load float, float* %c, align 4, !alias.scope !5
    store float %2, float* %arrayidx.i2, align 4, !noalias !6

    ; These two instructions may alias (for domain !0, the set of scopes in
    ; the !noalias list is not a superset of, or equal to, the scopes in the
    ; !alias.scope list):
    %2 = load float, float* %c, align 4, !alias.scope !6
    store float %0, float* %arrayidx.i, align 4, !noalias !7

'``fpmath``' Metadata
^^^^^^^^^^^^^^^^^^^^^

``fpmath`` metadata may be attached to any instruction of floating point
type. It can be used to express the maximum acceptable error in the
result of that instruction, in ULPs, thus potentially allowing the
compiler to use a more efficient but less accurate method of computing
it. ULP is defined as follows:

    If ``x`` is a real number that lies between two finite consecutive
    floating-point numbers ``a`` and ``b``, without being equal to one
    of them, then ``ulp(x) = |b - a|``, otherwise ``ulp(x)`` is the
    distance between the two non-equal finite floating-point numbers
    nearest ``x``. Moreover, ``ulp(NaN)`` is ``NaN``.

The metadata node shall consist of a single positive floating point
number representing the maximum relative error, for example:

.. code-block:: llvm

    !0 = !{ float 2.5 } ; maximum acceptable inaccuracy is 2.5 ULPs

.. _range-metadata:

'``range``' Metadata
^^^^^^^^^^^^^^^^^^^^

``range`` metadata may be attached only to ``load``, ``call`` and ``invoke`` of
integer types. It expresses the possible ranges the loaded value or the value
returned by the called function at this call site is in. The ranges are
represented with a flattened list of integers. The loaded value or the value
returned is known to be in the union of the ranges defined by each consecutive
pair. Each pair has the following properties:

-  The type must match the type loaded by the instruction.
-  The pair ``a,b`` represents the range ``[a,b)``.
-  Both ``a`` and ``b`` are constants.
-  The range is allowed to wrap.
-  The range should not represent the full or empty set. That is,
   ``a!=b``.

In addition, the pairs must be in signed order of the lower bound and
they must be non-contiguous.

Examples:

.. code-block:: llvm

      %a = load i8, i8* %x, align 1, !range !0 ; Can only be 0 or 1
      %b = load i8, i8* %y, align 1, !range !1 ; Can only be 255 (-1), 0 or 1
      %c = call i8 @foo(),       !range !2 ; Can only be 0, 1, 3, 4 or 5
      %d = invoke i8 @bar() to label %cont
             unwind label %lpad, !range !3 ; Can only be -2, -1, 3, 4 or 5
    ...
    !0 = !{ i8 0, i8 2 }
    !1 = !{ i8 255, i8 2 }
    !2 = !{ i8 0, i8 2, i8 3, i8 6 }
    !3 = !{ i8 -2, i8 0, i8 3, i8 6 }

'``llvm.loop``'
^^^^^^^^^^^^^^^

It is sometimes useful to attach information to loop constructs. Currently,
loop metadata is implemented as metadata attached to the branch instruction
in the loop latch block. This type of metadata refer to a metadata node that is
guaranteed to be separate for each loop. The loop identifier metadata is
specified with the name ``llvm.loop``.

The loop identifier metadata is implemented using a metadata that refers to
itself to avoid merging it with any other identifier metadata, e.g.,
during module linkage or function inlining. That is, each loop should refer
to their own identification metadata even if they reside in separate functions.
The following example contains loop identifier metadata for two separate loop
constructs:

.. code-block:: llvm

    !0 = !{!0}
    !1 = !{!1}

The loop identifier metadata can be used to specify additional
per-loop metadata. Any operands after the first operand can be treated
as user-defined metadata. For example the ``llvm.loop.unroll.count``
suggests an unroll factor to the loop unroller:

.. code-block:: llvm

      br i1 %exitcond, label %._crit_edge, label %.lr.ph, !llvm.loop !0
    ...
    !0 = !{!0, !1}
    !1 = !{!"llvm.loop.unroll.count", i32 4}

'``llvm.loop.vectorize``' and '``llvm.loop.interleave``'
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Metadata prefixed with ``llvm.loop.vectorize`` or ``llvm.loop.interleave`` are
used to control per-loop vectorization and interleaving parameters such as
vectorization width and interleave count. These metadata should be used in
conjunction with ``llvm.loop`` loop identification metadata. The
``llvm.loop.vectorize`` and ``llvm.loop.interleave`` metadata are only
optimization hints and the optimizer will only interleave and vectorize loops if
it believes it is safe to do so. The ``llvm.mem.parallel_loop_access`` metadata
which contains information about loop-carried memory dependencies can be helpful
in determining the safety of these transformations.

'``llvm.loop.interleave.count``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata suggests an interleave count to the loop interleaver.
The first operand is the string ``llvm.loop.interleave.count`` and the
second operand is an integer specifying the interleave count. For
example:

.. code-block:: llvm

   !0 = !{!"llvm.loop.interleave.count", i32 4}

Note that setting ``llvm.loop.interleave.count`` to 1 disables interleaving
multiple iterations of the loop. If ``llvm.loop.interleave.count`` is set to 0
then the interleave count will be determined automatically.

'``llvm.loop.vectorize.enable``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata selectively enables or disables vectorization for the loop. The
first operand is the string ``llvm.loop.vectorize.enable`` and the second operand
is a bit. If the bit operand value is 1 vectorization is enabled. A value of
0 disables vectorization:

.. code-block:: llvm

   !0 = !{!"llvm.loop.vectorize.enable", i1 0}
   !1 = !{!"llvm.loop.vectorize.enable", i1 1}

'``llvm.loop.vectorize.width``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata sets the target width of the vectorizer. The first
operand is the string ``llvm.loop.vectorize.width`` and the second
operand is an integer specifying the width. For example:

.. code-block:: llvm

   !0 = !{!"llvm.loop.vectorize.width", i32 4}

Note that setting ``llvm.loop.vectorize.width`` to 1 disables
vectorization of the loop. If ``llvm.loop.vectorize.width`` is set to
0 or if the loop does not have this metadata the width will be
determined automatically.

'``llvm.loop.unroll``'
^^^^^^^^^^^^^^^^^^^^^^

Metadata prefixed with ``llvm.loop.unroll`` are loop unrolling
optimization hints such as the unroll factor. ``llvm.loop.unroll``
metadata should be used in conjunction with ``llvm.loop`` loop
identification metadata. The ``llvm.loop.unroll`` metadata are only
optimization hints and the unrolling will only be performed if the
optimizer believes it is safe to do so.

'``llvm.loop.unroll.count``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata suggests an unroll factor to the loop unroller. The
first operand is the string ``llvm.loop.unroll.count`` and the second
operand is a positive integer specifying the unroll factor. For
example:

.. code-block:: llvm

   !0 = !{!"llvm.loop.unroll.count", i32 4}

If the trip count of the loop is less than the unroll count the loop
will be partially unrolled.

'``llvm.loop.unroll.disable``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata disables loop unrolling. The metadata has a single operand
which is the string ``llvm.loop.unroll.disable``. For example:

.. code-block:: llvm

   !0 = !{!"llvm.loop.unroll.disable"}

'``llvm.loop.unroll.runtime.disable``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata disables runtime loop unrolling. The metadata has a single
operand which is the string ``llvm.loop.unroll.runtime.disable``. For example:

.. code-block:: llvm

   !0 = !{!"llvm.loop.unroll.runtime.disable"}

'``llvm.loop.unroll.enable``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata suggests that the loop should be fully unrolled if the trip count
is known at compile time and partially unrolled if the trip count is not known
at compile time. The metadata has a single operand which is the string
``llvm.loop.unroll.enable``.  For example:

.. code-block:: llvm

   !0 = !{!"llvm.loop.unroll.enable"}

'``llvm.loop.unroll.full``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This metadata suggests that the loop should be unrolled fully. The
metadata has a single operand which is the string ``llvm.loop.unroll.full``.
For example:

.. code-block:: llvm

   !0 = !{!"llvm.loop.unroll.full"}

'``llvm.mem``'
^^^^^^^^^^^^^^^

Metadata types used to annotate memory accesses with information helpful
for optimizations are prefixed with ``llvm.mem``.

'``llvm.mem.parallel_loop_access``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The ``llvm.mem.parallel_loop_access`` metadata refers to a loop identifier,
or metadata containing a list of loop identifiers for nested loops.
The metadata is attached to memory accessing instructions and denotes that
no loop carried memory dependence exist between it and other instructions denoted
with the same loop identifier.

Precisely, given two instructions ``m1`` and ``m2`` that both have the
``llvm.mem.parallel_loop_access`` metadata, with ``L1`` and ``L2`` being the
set of loops associated with that metadata, respectively, then there is no loop
carried dependence between ``m1`` and ``m2`` for loops in both ``L1`` and
``L2``.

As a special case, if all memory accessing instructions in a loop have
``llvm.mem.parallel_loop_access`` metadata that refers to that loop, then the
loop has no loop carried memory dependences and is considered to be a parallel
loop.

Note that if not all memory access instructions have such metadata referring to
the loop, then the loop is considered not being trivially parallel. Additional
memory dependence analysis is required to make that determination. As a fail
safe mechanism, this causes loops that were originally parallel to be considered
sequential (if optimization passes that are unaware of the parallel semantics
insert new memory instructions into the loop body).

Example of a loop that is considered parallel due to its correct use of
both ``llvm.loop`` and ``llvm.mem.parallel_loop_access``
metadata types that refer to the same loop identifier metadata.

.. code-block:: llvm

   for.body:
     ...
     %val0 = load i32, i32* %arrayidx, !llvm.mem.parallel_loop_access !0
     ...
     store i32 %val0, i32* %arrayidx1, !llvm.mem.parallel_loop_access !0
     ...
     br i1 %exitcond, label %for.end, label %for.body, !llvm.loop !0

   for.end:
   ...
   !0 = !{!0}

It is also possible to have nested parallel loops. In that case the
memory accesses refer to a list of loop identifier metadata nodes instead of
the loop identifier metadata node directly:

.. code-block:: llvm

   outer.for.body:
     ...
     %val1 = load i32, i32* %arrayidx3, !llvm.mem.parallel_loop_access !2
     ...
     br label %inner.for.body

   inner.for.body:
     ...
     %val0 = load i32, i32* %arrayidx1, !llvm.mem.parallel_loop_access !0
     ...
     store i32 %val0, i32* %arrayidx2, !llvm.mem.parallel_loop_access !0
     ...
     br i1 %exitcond, label %inner.for.end, label %inner.for.body, !llvm.loop !1

   inner.for.end:
     ...
     store i32 %val1, i32* %arrayidx4, !llvm.mem.parallel_loop_access !2
     ...
     br i1 %exitcond, label %outer.for.end, label %outer.for.body, !llvm.loop !2

   outer.for.end:                                          ; preds = %for.body
   ...
   !0 = !{!1, !2} ; a list of loop identifiers
   !1 = !{!1} ; an identifier for the inner loop
   !2 = !{!2} ; an identifier for the outer loop

'``llvm.bitsets``'
^^^^^^^^^^^^^^^^^^

The ``llvm.bitsets`` global metadata is used to implement
:doc:`bitsets <BitSets>`.

Module Flags Metadata
=====================

Information about the module as a whole is difficult to convey to LLVM's
subsystems. The LLVM IR isn't sufficient to transmit this information.
The ``llvm.module.flags`` named metadata exists in order to facilitate
this. These flags are in the form of key / value pairs --- much like a
dictionary --- making it easy for any subsystem who cares about a flag to
look it up.

The ``llvm.module.flags`` metadata contains a list of metadata triplets.
Each triplet has the following form:

-  The first element is a *behavior* flag, which specifies the behavior
   when two (or more) modules are merged together, and it encounters two
   (or more) metadata with the same ID. The supported behaviors are
   described below.
-  The second element is a metadata string that is a unique ID for the
   metadata. Each module may only have one flag entry for each unique ID (not
   including entries with the **Require** behavior).
-  The third element is the value of the flag.

When two (or more) modules are merged together, the resulting
``llvm.module.flags`` metadata is the union of the modules' flags. That is, for
each unique metadata ID string, there will be exactly one entry in the merged
modules ``llvm.module.flags`` metadata table, and the value for that entry will
be determined by the merge behavior flag, as described below. The only exception
is that entries with the *Require* behavior are always preserved.

The following behaviors are supported:

.. list-table::
   :header-rows: 1
   :widths: 10 90

   * - Value
     - Behavior

   * - 1
     - **Error**
           Emits an error if two values disagree, otherwise the resulting value
           is that of the operands.

   * - 2
     - **Warning**
           Emits a warning if two values disagree. The result value will be the
           operand for the flag from the first module being linked.

   * - 3
     - **Require**
           Adds a requirement that another module flag be present and have a
           specified value after linking is performed. The value must be a
           metadata pair, where the first element of the pair is the ID of the
           module flag to be restricted, and the second element of the pair is
           the value the module flag should be restricted to. This behavior can
           be used to restrict the allowable results (via triggering of an
           error) of linking IDs with the **Override** behavior.

   * - 4
     - **Override**
           Uses the specified value, regardless of the behavior or value of the
           other module. If both modules specify **Override**, but the values
           differ, an error will be emitted.

   * - 5
     - **Append**
           Appends the two values, which are required to be metadata nodes.

   * - 6
     - **AppendUnique**
           Appends the two values, which are required to be metadata
           nodes. However, duplicate entries in the second list are dropped
           during the append operation.

It is an error for a particular unique flag ID to have multiple behaviors,
except in the case of **Require** (which adds restrictions on another metadata
value) or **Override**.

An example of module flags:

.. code-block:: llvm

    !0 = !{ i32 1, !"foo", i32 1 }
    !1 = !{ i32 4, !"bar", i32 37 }
    !2 = !{ i32 2, !"qux", i32 42 }
    !3 = !{ i32 3, !"qux",
      !{
        !"foo", i32 1
      }
    }
    !llvm.module.flags = !{ !0, !1, !2, !3 }

-  Metadata ``!0`` has the ID ``!"foo"`` and the value '1'. The behavior
   if two or more ``!"foo"`` flags are seen is to emit an error if their
   values are not equal.

-  Metadata ``!1`` has the ID ``!"bar"`` and the value '37'. The
   behavior if two or more ``!"bar"`` flags are seen is to use the value
   '37'.

-  Metadata ``!2`` has the ID ``!"qux"`` and the value '42'. The
   behavior if two or more ``!"qux"`` flags are seen is to emit a
   warning if their values are not equal.

-  Metadata ``!3`` has the ID ``!"qux"`` and the value:

   ::

       !{ !"foo", i32 1 }

   The behavior is to emit an error if the ``llvm.module.flags`` does not
   contain a flag with the ID ``!"foo"`` that has the value '1' after linking is
   performed.

Objective-C Garbage Collection Module Flags Metadata
----------------------------------------------------

On the Mach-O platform, Objective-C stores metadata about garbage
collection in a special section called "image info". The metadata
consists of a version number and a bitmask specifying what types of
garbage collection are supported (if any) by the file. If two or more
modules are linked together their garbage collection metadata needs to
be merged rather than appended together.

The Objective-C garbage collection module flags metadata consists of the
following key-value pairs:

.. list-table::
   :header-rows: 1
   :widths: 30 70

   * - Key
     - Value

   * - ``Objective-C Version``
     - **[Required]** --- The Objective-C ABI version. Valid values are 1 and 2.

   * - ``Objective-C Image Info Version``
     - **[Required]** --- The version of the image info section. Currently
       always 0.

   * - ``Objective-C Image Info Section``
     - **[Required]** --- The section to place the metadata. Valid values are
       ``"__OBJC, __image_info, regular"`` for Objective-C ABI version 1, and
       ``"__DATA,__objc_imageinfo, regular, no_dead_strip"`` for
       Objective-C ABI version 2.

   * - ``Objective-C Garbage Collection``
     - **[Required]** --- Specifies whether garbage collection is supported or
       not. Valid values are 0, for no garbage collection, and 2, for garbage
       collection supported.

   * - ``Objective-C GC Only``
     - **[Optional]** --- Specifies that only garbage collection is supported.
       If present, its value must be 6. This flag requires that the
       ``Objective-C Garbage Collection`` flag have the value 2.

Some important flag interactions:

-  If a module with ``Objective-C Garbage Collection`` set to 0 is
   merged with a module with ``Objective-C Garbage Collection`` set to
   2, then the resulting module has the
   ``Objective-C Garbage Collection`` flag set to 0.
-  A module with ``Objective-C Garbage Collection`` set to 0 cannot be
   merged with a module with ``Objective-C GC Only`` set to 6.

Automatic Linker Flags Module Flags Metadata
--------------------------------------------

Some targets support embedding flags to the linker inside individual object
files. Typically this is used in conjunction with language extensions which
allow source files to explicitly declare the libraries they depend on, and have
these automatically be transmitted to the linker via object files.

These flags are encoded in the IR using metadata in the module flags section,
using the ``Linker Options`` key. The merge behavior for this flag is required
to be ``AppendUnique``, and the value for the key is expected to be a metadata
node which should be a list of other metadata nodes, each of which should be a
list of metadata strings defining linker options.

For example, the following metadata section specifies two separate sets of
linker options, presumably to link against ``libz`` and the ``Cocoa``
framework::

    !0 = !{ i32 6, !"Linker Options",
       !{
          !{ !"-lz" },
          !{ !"-framework", !"Cocoa" } } }
    !llvm.module.flags = !{ !0 }

The metadata encoding as lists of lists of options, as opposed to a collapsed
list of options, is chosen so that the IR encoding can use multiple option
strings to specify e.g., a single library, while still having that specifier be
preserved as an atomic element that can be recognized by a target specific
assembly writer or object file emitter.

Each individual option is required to be either a valid option for the target's
linker, or an option that is reserved by the target specific assembly writer or
object file emitter. No other aspect of these options is defined by the IR.

C type width Module Flags Metadata
----------------------------------

The ARM backend emits a section into each generated object file describing the
options that it was compiled with (in a compiler-independent way) to prevent
linking incompatible objects, and to allow automatic library selection. Some
of these options are not visible at the IR level, namely wchar_t width and enum
width.

To pass this information to the backend, these options are encoded in module
flags metadata, using the following key-value pairs:

.. list-table::
   :header-rows: 1
   :widths: 30 70

   * - Key
     - Value

   * - short_wchar
     - * 0 --- sizeof(wchar_t) == 4
       * 1 --- sizeof(wchar_t) == 2

   * - short_enum
     - * 0 --- Enums are at least as large as an ``int``.
       * 1 --- Enums are stored in the smallest integer type which can
         represent all of its values.

For example, the following metadata section specifies that the module was
compiled with a ``wchar_t`` width of 4 bytes, and the underlying type of an
enum is the smallest type which can represent all of its values::

    !llvm.module.flags = !{!0, !1}
    !0 = !{i32 1, !"short_wchar", i32 1}
    !1 = !{i32 1, !"short_enum", i32 0}

.. _intrinsicglobalvariables:

Intrinsic Global Variables
==========================

LLVM has a number of "magic" global variables that contain data that
affect code generation or other IR semantics. These are documented here.
All globals of this sort should have a section specified as
"``llvm.metadata``". This section and all globals that start with
"``llvm.``" are reserved for use by LLVM.

.. _gv_llvmused:

The '``llvm.used``' Global Variable
-----------------------------------

The ``@llvm.used`` global is an array which has
:ref:`appending linkage <linkage_appending>`. This array contains a list of
pointers to named global variables, functions and aliases which may optionally
have a pointer cast formed of bitcast or getelementptr. For example, a legal
use of it is:

.. code-block:: llvm

    @X = global i8 4
    @Y = global i32 123

    @llvm.used = appending global [2 x i8*] [
       i8* @X,
       i8* bitcast (i32* @Y to i8*)
    ], section "llvm.metadata"

If a symbol appears in the ``@llvm.used`` list, then the compiler, assembler,
and linker are required to treat the symbol as if there is a reference to the
symbol that it cannot see (which is why they have to be named). For example, if
a variable has internal linkage and no references other than that from the
``@llvm.used`` list, it cannot be deleted. This is commonly used to represent
references from inline asms and other things the compiler cannot "see", and
corresponds to "``attribute((used))``" in GNU C.

On some targets, the code generator must emit a directive to the
assembler or object file to prevent the assembler and linker from
molesting the symbol.

.. _gv_llvmcompilerused:

The '``llvm.compiler.used``' Global Variable
--------------------------------------------

The ``@llvm.compiler.used`` directive is the same as the ``@llvm.used``
directive, except that it only prevents the compiler from touching the
symbol. On targets that support it, this allows an intelligent linker to
optimize references to the symbol without being impeded as it would be
by ``@llvm.used``.

This is a rare construct that should only be used in rare circumstances,
and should not be exposed to source languages.

.. _gv_llvmglobalctors:

The '``llvm.global_ctors``' Global Variable
-------------------------------------------

.. code-block:: llvm

    %0 = type { i32, void ()*, i8* }
    @llvm.global_ctors = appending global [1 x %0] [%0 { i32 65535, void ()* @ctor, i8* @data }]

The ``@llvm.global_ctors`` array contains a list of constructor
functions, priorities, and an optional associated global or function.
The functions referenced by this array will be called in ascending order
of priority (i.e. lowest first) when the module is loaded. The order of
functions with the same priority is not defined.

If the third field is present, non-null, and points to a global variable
or function, the initializer function will only run if the associated
data from the current module is not discarded.

.. _llvmglobaldtors:

The '``llvm.global_dtors``' Global Variable
-------------------------------------------

.. code-block:: llvm

    %0 = type { i32, void ()*, i8* }
    @llvm.global_dtors = appending global [1 x %0] [%0 { i32 65535, void ()* @dtor, i8* @data }]

The ``@llvm.global_dtors`` array contains a list of destructor
functions, priorities, and an optional associated global or function.
The functions referenced by this array will be called in descending
order of priority (i.e. highest first) when the module is unloaded. The
order of functions with the same priority is not defined.

If the third field is present, non-null, and points to a global variable
or function, the destructor function will only run if the associated
data from the current module is not discarded.

Instruction Reference
=====================

The LLVM instruction set consists of several different classifications
of instructions: :ref:`terminator instructions <terminators>`, :ref:`binary
instructions <binaryops>`, :ref:`bitwise binary
instructions <bitwiseops>`, :ref:`memory instructions <memoryops>`, and
:ref:`other instructions <otherops>`.

.. _terminators:

Terminator Instructions
-----------------------

As mentioned :ref:`previously <functionstructure>`, every basic block in a
program ends with a "Terminator" instruction, which indicates which
block should be executed after the current block is finished. These
terminator instructions typically yield a '``void``' value: they produce
control flow, not values (the one exception being the
':ref:`invoke <i_invoke>`' instruction).

The terminator instructions are: ':ref:`ret <i_ret>`',
':ref:`br <i_br>`', ':ref:`switch <i_switch>`',
':ref:`indirectbr <i_indirectbr>`', ':ref:`invoke <i_invoke>`',
':ref:`resume <i_resume>`', ':ref:`catchpad <i_catchpad>`',
':ref:`catchendpad <i_catchendpad>`',
':ref:`catchret <i_catchret>`',
':ref:`cleanupret <i_cleanupret>`',
':ref:`terminatepad <i_terminatepad>`',
and ':ref:`unreachable <i_unreachable>`'.

.. _i_ret:

'``ret``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      ret <type> <value>       ; Return a value from a non-void function
      ret void                 ; Return from void function

Overview:
"""""""""

The '``ret``' instruction is used to return control flow (and optionally
a value) from a function back to the caller.

There are two forms of the '``ret``' instruction: one that returns a
value and then causes control flow, and one that just causes control
flow to occur.

Arguments:
""""""""""

The '``ret``' instruction optionally accepts a single argument, the
return value. The type of the return value must be a ':ref:`first
class <t_firstclass>`' type.

A function is not :ref:`well formed <wellformed>` if it it has a non-void
return type and contains a '``ret``' instruction with no return value or
a return value with a type that does not match its type, or if it has a
void return type and contains a '``ret``' instruction with a return
value.

Semantics:
""""""""""

When the '``ret``' instruction is executed, control flow returns back to
the calling function's context. If the caller is a
":ref:`call <i_call>`" instruction, execution continues at the
instruction after the call. If the caller was an
":ref:`invoke <i_invoke>`" instruction, execution continues at the
beginning of the "normal" destination block. If the instruction returns
a value, that value shall set the call or invoke instruction's return
value.

Example:
""""""""

.. code-block:: llvm

      ret i32 5                       ; Return an integer value of 5
      ret void                        ; Return from a void function
      ret { i32, i8 } { i32 4, i8 2 } ; Return a struct of values 4 and 2

.. _i_br:

'``br``' Instruction
^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      br i1 <cond>, label <iftrue>, label <iffalse>
      br label <dest>          ; Unconditional branch

Overview:
"""""""""

The '``br``' instruction is used to cause control flow to transfer to a
different basic block in the current function. There are two forms of
this instruction, corresponding to a conditional branch and an
unconditional branch.

Arguments:
""""""""""

The conditional branch form of the '``br``' instruction takes a single
'``i1``' value and two '``label``' values. The unconditional form of the
'``br``' instruction takes a single '``label``' value as a target.

Semantics:
""""""""""

Upon execution of a conditional '``br``' instruction, the '``i1``'
argument is evaluated. If the value is ``true``, control flows to the
'``iftrue``' ``label`` argument. If "cond" is ``false``, control flows
to the '``iffalse``' ``label`` argument.

Example:
""""""""

.. code-block:: llvm

    Test:
      %cond = icmp eq i32 %a, %b
      br i1 %cond, label %IfEqual, label %IfUnequal
    IfEqual:
      ret i32 1
    IfUnequal:
      ret i32 0

.. _i_switch:

'``switch``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      switch <intty> <value>, label <defaultdest> [ <intty> <val>, label <dest> ... ]

Overview:
"""""""""

The '``switch``' instruction is used to transfer control flow to one of
several different places. It is a generalization of the '``br``'
instruction, allowing a branch to occur to one of many possible
destinations.

Arguments:
""""""""""

The '``switch``' instruction uses three parameters: an integer
comparison value '``value``', a default '``label``' destination, and an
array of pairs of comparison value constants and '``label``'s. The table
is not allowed to contain duplicate constant entries.

Semantics:
""""""""""

The ``switch`` instruction specifies a table of values and destinations.
When the '``switch``' instruction is executed, this table is searched
for the given value. If the value is found, control flow is transferred
to the corresponding destination; otherwise, control flow is transferred
to the default destination.

Implementation:
"""""""""""""""

Depending on properties of the target machine and the particular
``switch`` instruction, this instruction may be code generated in
different ways. For example, it could be generated as a series of
chained conditional branches or with a lookup table.

Example:
""""""""

.. code-block:: llvm

     ; Emulate a conditional br instruction
     %Val = zext i1 %value to i32
     switch i32 %Val, label %truedest [ i32 0, label %falsedest ]

     ; Emulate an unconditional br instruction
     switch i32 0, label %dest [ ]

     ; Implement a jump table:
     switch i32 %val, label %otherwise [ i32 0, label %onzero
                                         i32 1, label %onone
                                         i32 2, label %ontwo ]

.. _i_indirectbr:

'``indirectbr``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      indirectbr <somety>* <address>, [ label <dest1>, label <dest2>, ... ]

Overview:
"""""""""

The '``indirectbr``' instruction implements an indirect branch to a
label within the current function, whose address is specified by
"``address``". Address must be derived from a
:ref:`blockaddress <blockaddress>` constant.

Arguments:
""""""""""

The '``address``' argument is the address of the label to jump to. The
rest of the arguments indicate the full set of possible destinations
that the address may point to. Blocks are allowed to occur multiple
times in the destination list, though this isn't particularly useful.

This destination list is required so that dataflow analysis has an
accurate understanding of the CFG.

Semantics:
""""""""""

Control transfers to the block specified in the address argument. All
possible destination blocks must be listed in the label list, otherwise
this instruction has undefined behavior. This implies that jumps to
labels defined in other functions have undefined behavior as well.

Implementation:
"""""""""""""""

This is typically implemented with a jump through a register.

Example:
""""""""

.. code-block:: llvm

     indirectbr i8* %Addr, [ label %bb1, label %bb2, label %bb3 ]

.. _i_invoke:

'``invoke``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = invoke [cconv] [ret attrs] <ptr to function ty> <function ptr val>(<function args>) [fn attrs]
                    to label <normal label> unwind label <exception label>

Overview:
"""""""""

The '``invoke``' instruction causes control to transfer to a specified
function, with the possibility of control flow transfer to either the
'``normal``' label or the '``exception``' label. If the callee function
returns with the "``ret``" instruction, control flow will return to the
"normal" label. If the callee (or any indirect callees) returns via the
":ref:`resume <i_resume>`" instruction or other exception handling
mechanism, control is interrupted and continued at the dynamically
nearest "exception" label.

The '``exception``' label is a `landing
pad <ExceptionHandling.html#overview>`_ for the exception. As such,
'``exception``' label is required to have the
":ref:`landingpad <i_landingpad>`" instruction, which contains the
information about the behavior of the program after unwinding happens,
as its first non-PHI instruction. The restrictions on the
"``landingpad``" instruction's tightly couples it to the "``invoke``"
instruction, so that the important information contained within the
"``landingpad``" instruction can't be lost through normal code motion.

Arguments:
""""""""""

This instruction requires several arguments:

#. The optional "cconv" marker indicates which :ref:`calling
   convention <callingconv>` the call should use. If none is
   specified, the call defaults to using C calling conventions.
#. The optional :ref:`Parameter Attributes <paramattrs>` list for return
   values. Only '``zeroext``', '``signext``', and '``inreg``' attributes
   are valid here.
#. '``ptr to function ty``': shall be the signature of the pointer to
   function value being invoked. In most cases, this is a direct
   function invocation, but indirect ``invoke``'s are just as possible,
   branching off an arbitrary pointer to function value.
#. '``function ptr val``': An LLVM value containing a pointer to a
   function to be invoked.
#. '``function args``': argument list whose types match the function
   signature argument types and parameter attributes. All arguments must
   be of :ref:`first class <t_firstclass>` type. If the function signature
   indicates the function accepts a variable number of arguments, the
   extra arguments can be specified.
#. '``normal label``': the label reached when the called function
   executes a '``ret``' instruction.
#. '``exception label``': the label reached when a callee returns via
   the :ref:`resume <i_resume>` instruction or other exception handling
   mechanism.
#. The optional :ref:`function attributes <fnattrs>` list. Only
   '``noreturn``', '``nounwind``', '``readonly``' and '``readnone``'
   attributes are valid here.

Semantics:
""""""""""

This instruction is designed to operate as a standard '``call``'
instruction in most regards. The primary difference is that it
establishes an association with a label, which is used by the runtime
library to unwind the stack.

This instruction is used in languages with destructors to ensure that
proper cleanup is performed in the case of either a ``longjmp`` or a
thrown exception. Additionally, this is important for implementation of
'``catch``' clauses in high-level languages that support them.

For the purposes of the SSA form, the definition of the value returned
by the '``invoke``' instruction is deemed to occur on the edge from the
current block to the "normal" label. If the callee unwinds then no
return value is available.

Example:
""""""""

.. code-block:: llvm

      %retval = invoke i32 @Test(i32 15) to label %Continue
                  unwind label %TestCleanup              ; i32:retval set
      %retval = invoke coldcc i32 %Testfnptr(i32 15) to label %Continue
                  unwind label %TestCleanup              ; i32:retval set

.. _i_resume:

'``resume``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      resume <type> <value>

Overview:
"""""""""

The '``resume``' instruction is a terminator instruction that has no
successors.

Arguments:
""""""""""

The '``resume``' instruction requires one argument, which must have the
same type as the result of any '``landingpad``' instruction in the same
function.

Semantics:
""""""""""

The '``resume``' instruction resumes propagation of an existing
(in-flight) exception whose unwinding was interrupted with a
:ref:`landingpad <i_landingpad>` instruction.

Example:
""""""""

.. code-block:: llvm

      resume { i8*, i32 } %exn

.. _i_catchpad:

'``catchpad``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <resultval> = catchpad <resultty> [<args>*]
          to label <normal label> unwind label <exception label>

Overview:
"""""""""

The '``catchpad``' instruction is used by `LLVM's exception handling
system <ExceptionHandling.html#overview>`_ to specify that a basic block
is a catch block --- one where a personality routine attempts to transfer
control to catch an exception.
The ``args`` correspond to whatever information the personality
routine requires to know if this is an appropriate place to catch the
exception. Control is tranfered to the ``exception`` label if the
``catchpad`` is not an appropriate handler for the in-flight exception.
The ``normal`` label should contain the code found in the ``catch``
portion of a ``try``/``catch`` sequence. It defines values supplied by
the :ref:`personality function <personalityfn>` upon re-entry to the
function. The ``resultval`` has the type ``resultty``.

Arguments:
""""""""""

The instruction takes a list of arbitrary values which are interpreted
by the :ref:`personality function <personalityfn>`.

The ``catchpad`` must be provided a ``normal`` label to transfer control
to if the ``catchpad`` matches the exception and an ``exception``
label to transfer control to if it doesn't.

Semantics:
""""""""""

The '``catchpad``' instruction defines the values which are set by the
:ref:`personality function <personalityfn>` upon re-entry to the function, and
therefore the "result type" of the ``catchpad`` instruction. As with
calling conventions, how the personality function results are
represented in LLVM IR is target specific.

When the call stack is being unwound due to an exception being thrown,
the exception is compared against the ``args``. If it doesn't match,
then control is transfered to the ``exception`` basic block.

The ``catchpad`` instruction has several restrictions:

-  A catch block is a basic block which is the unwind destination of
   an exceptional instruction.
-  A catch block must have a '``catchpad``' instruction as its
   first non-PHI instruction.
-  A catch block's ``exception`` edge must refer to a catch block or a
   catch-end block.
-  There can be only one '``catchpad``' instruction within the
   catch block.
-  A basic block that is not a catch block may not include a
   '``catchpad``' instruction.
-  It is undefined behavior for control to transfer from a ``catchpad`` to a
   ``cleanupret`` without first executing a ``catchret`` and a subsequent
   ``cleanuppad``.
-  It is undefined behavior for control to transfer from a ``catchpad`` to a
   ``ret`` without first executing a ``catchret``.

Example:
""""""""

.. code-block:: llvm

      ;; A catch block which can catch an integer.
      %res = catchpad { i8*, i32 } [i8** @_ZTIi]
        to label %int.handler unwind label %terminate

.. _i_catchendpad:

'``catchendpad``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      catchendpad unwind label <nextaction>
      catchendpad unwind to caller

Overview:
"""""""""

The '``catchendpad``' instruction is used by `LLVM's exception handling
system <ExceptionHandling.html#overview>`_ to communicate to the
:ref:`personality function <personalityfn>` which invokes are associated
with a chain of :ref:`catchpad <i_catchpad>` instructions.

The ``nextaction`` label indicates where control should transfer to if
none of the ``catchpad`` instructions are suitable for catching the
in-flight exception.

If a ``nextaction`` label is not present, the instruction unwinds out of
its parent function. The
:ref:`personality function <personalityfn>` will continue processing
exception handling actions in the caller.

Arguments:
""""""""""

The instruction optionally takes a label, ``nextaction``, indicating
where control should transfer to if none of the preceding
``catchpad`` instructions are suitable for the in-flight exception.

Semantics:
""""""""""

When the call stack is being unwound due to an exception being thrown
and none of the constituent ``catchpad`` instructions match, then
control is transfered to ``nextaction`` if it is present. If it is not
present, control is transfered to the caller.

The ``catchendpad`` instruction has several restrictions:

-  A catch-end block is a basic block which is the unwind destination of
   an exceptional instruction.
-  A catch-end block must have a '``catchendpad``' instruction as its
   first non-PHI instruction.
-  There can be only one '``catchendpad``' instruction within the
   catch block.
-  A basic block that is not a catch-end block may not include a
   '``catchendpad``' instruction.
-  Exactly one catch block may unwind to a ``catchendpad``.
-  The unwind target of invokes between a ``catchpad`` and a
   corresponding ``catchret`` must be its ``catchendpad``.

Example:
""""""""

.. code-block:: llvm

      catchendpad unwind label %terminate
      catchendpad unwind to caller

.. _i_catchret:

'``catchret``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      catchret <type> <value> to label <normal>

Overview:
"""""""""

The '``catchret``' instruction is a terminator instruction that has a
single successor.


Arguments:
""""""""""

The '``catchret``' instruction requires one argument which specifies
where control will transfer to next.

Semantics:
""""""""""

The '``catchret``' instruction ends the existing (in-flight) exception
whose unwinding was interrupted with a
:ref:`catchpad <i_catchpad>` instruction.
The :ref:`personality function <personalityfn>` gets a chance to execute
arbitrary code to, for example, run a C++ destructor.
Control then transfers to ``normal``.
It may be passed an optional, personality specific, value.

Example:
""""""""

.. code-block:: llvm

      catchret label %continue

.. _i_cleanupret:

'``cleanupret``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      cleanupret <type> <value> unwind label <continue>
      cleanupret <type> <value> unwind to caller

Overview:
"""""""""

The '``cleanupret``' instruction is a terminator instruction that has
an optional successor.


Arguments:
""""""""""

The '``cleanupret``' instruction requires one argument, which must have the
same type as the result of any '``cleanuppad``' instruction in the same
function. It also has an optional successor,  ``continue``.

Semantics:
""""""""""

The '``cleanupret``' instruction indicates to the
:ref:`personality function <personalityfn>` that one
:ref:`cleanuppad <i_cleanuppad>` it transferred control to has ended.
It transfers control to ``continue`` or unwinds out of the function.

Example:
""""""""

.. code-block:: llvm

      cleanupret void unwind to caller
      cleanupret { i8*, i32 } %exn unwind label %continue

.. _i_terminatepad:

'``terminatepad``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      terminatepad [<args>*] unwind label <exception label>
      terminatepad [<args>*] unwind to caller

Overview:
"""""""""

The '``terminatepad``' instruction is used by `LLVM's exception handling
system <ExceptionHandling.html#overview>`_ to specify that a basic block
is a terminate block --- one where a personality routine may decide to
terminate the program.
The ``args`` correspond to whatever information the personality
routine requires to know if this is an appropriate place to terminate the
program. Control is transferred to the ``exception`` label if the
personality routine decides not to terminate the program for the
in-flight exception.

Arguments:
""""""""""

The instruction takes a list of arbitrary values which are interpreted
by the :ref:`personality function <personalityfn>`.

The ``terminatepad`` may be given an ``exception`` label to
transfer control to if the in-flight exception matches the ``args``.

Semantics:
""""""""""

When the call stack is being unwound due to an exception being thrown,
the exception is compared against the ``args``. If it matches,
then control is transfered to the ``exception`` basic block. Otherwise,
the program is terminated via personality-specific means. Typically,
the first argument to ``terminatepad`` specifies what function the
personality should defer to in order to terminate the program.

The ``terminatepad`` instruction has several restrictions:

-  A terminate block is a basic block which is the unwind destination of
   an exceptional instruction.
-  A terminate block must have a '``terminatepad``' instruction as its
   first non-PHI instruction.
-  There can be only one '``terminatepad``' instruction within the
   terminate block.
-  A basic block that is not a terminate block may not include a
   '``terminatepad``' instruction.

Example:
""""""""

.. code-block:: llvm

      ;; A terminate block which only permits integers.
      terminatepad [i8** @_ZTIi] unwind label %continue

.. _i_unreachable:

'``unreachable``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      unreachable

Overview:
"""""""""

The '``unreachable``' instruction has no defined semantics. This
instruction is used to inform the optimizer that a particular portion of
the code is not reachable. This can be used to indicate that the code
after a no-return function cannot be reached, and other facts.

Semantics:
""""""""""

The '``unreachable``' instruction has no defined semantics.

.. _binaryops:

Binary Operations
-----------------

Binary operators are used to do most of the computation in a program.
They require two operands of the same type, execute an operation on
them, and produce a single value. The operands might represent multiple
data, as is the case with the :ref:`vector <t_vector>` data type. The
result value has the same type as its operands.

There are several different binary operators:

.. _i_add:

'``add``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = add <ty> <op1>, <op2>          ; yields ty:result
      <result> = add nuw <ty> <op1>, <op2>      ; yields ty:result
      <result> = add nsw <ty> <op1>, <op2>      ; yields ty:result
      <result> = add nuw nsw <ty> <op1>, <op2>  ; yields ty:result

Overview:
"""""""""

The '``add``' instruction returns the sum of its two operands.

Arguments:
""""""""""

The two arguments to the '``add``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The value produced is the integer sum of the two operands.

If the sum has unsigned overflow, the result returned is the
mathematical result modulo 2\ :sup:`n`\ , where n is the bit width of
the result.

Because LLVM integers use a two's complement representation, this
instruction is appropriate for both signed and unsigned integers.

``nuw`` and ``nsw`` stand for "No Unsigned Wrap" and "No Signed Wrap",
respectively. If the ``nuw`` and/or ``nsw`` keywords are present, the
result value of the ``add`` is a :ref:`poison value <poisonvalues>` if
unsigned and/or signed overflow, respectively, occurs.

Example:
""""""""

.. code-block:: llvm

      <result> = add i32 4, %var          ; yields i32:result = 4 + %var

.. _i_fadd:

'``fadd``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fadd [fast-math flags]* <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``fadd``' instruction returns the sum of its two operands.

Arguments:
""""""""""

The two arguments to the '``fadd``' instruction must be :ref:`floating
point <t_floating>` or :ref:`vector <t_vector>` of floating point values.
Both arguments must have identical types.

Semantics:
""""""""""

The value produced is the floating point sum of the two operands. This
instruction can also take any number of :ref:`fast-math flags <fastmath>`,
which are optimization hints to enable otherwise unsafe floating point
optimizations:

Example:
""""""""

.. code-block:: llvm

      <result> = fadd float 4.0, %var          ; yields float:result = 4.0 + %var

'``sub``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = sub <ty> <op1>, <op2>          ; yields ty:result
      <result> = sub nuw <ty> <op1>, <op2>      ; yields ty:result
      <result> = sub nsw <ty> <op1>, <op2>      ; yields ty:result
      <result> = sub nuw nsw <ty> <op1>, <op2>  ; yields ty:result

Overview:
"""""""""

The '``sub``' instruction returns the difference of its two operands.

Note that the '``sub``' instruction is used to represent the '``neg``'
instruction present in most other intermediate representations.

Arguments:
""""""""""

The two arguments to the '``sub``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The value produced is the integer difference of the two operands.

If the difference has unsigned overflow, the result returned is the
mathematical result modulo 2\ :sup:`n`\ , where n is the bit width of
the result.

Because LLVM integers use a two's complement representation, this
instruction is appropriate for both signed and unsigned integers.

``nuw`` and ``nsw`` stand for "No Unsigned Wrap" and "No Signed Wrap",
respectively. If the ``nuw`` and/or ``nsw`` keywords are present, the
result value of the ``sub`` is a :ref:`poison value <poisonvalues>` if
unsigned and/or signed overflow, respectively, occurs.

Example:
""""""""

.. code-block:: llvm

      <result> = sub i32 4, %var          ; yields i32:result = 4 - %var
      <result> = sub i32 0, %val          ; yields i32:result = -%var

.. _i_fsub:

'``fsub``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fsub [fast-math flags]* <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``fsub``' instruction returns the difference of its two operands.

Note that the '``fsub``' instruction is used to represent the '``fneg``'
instruction present in most other intermediate representations.

Arguments:
""""""""""

The two arguments to the '``fsub``' instruction must be :ref:`floating
point <t_floating>` or :ref:`vector <t_vector>` of floating point values.
Both arguments must have identical types.

Semantics:
""""""""""

The value produced is the floating point difference of the two operands.
This instruction can also take any number of :ref:`fast-math
flags <fastmath>`, which are optimization hints to enable otherwise
unsafe floating point optimizations:

Example:
""""""""

.. code-block:: llvm

      <result> = fsub float 4.0, %var           ; yields float:result = 4.0 - %var
      <result> = fsub float -0.0, %val          ; yields float:result = -%var

'``mul``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = mul <ty> <op1>, <op2>          ; yields ty:result
      <result> = mul nuw <ty> <op1>, <op2>      ; yields ty:result
      <result> = mul nsw <ty> <op1>, <op2>      ; yields ty:result
      <result> = mul nuw nsw <ty> <op1>, <op2>  ; yields ty:result

Overview:
"""""""""

The '``mul``' instruction returns the product of its two operands.

Arguments:
""""""""""

The two arguments to the '``mul``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The value produced is the integer product of the two operands.

If the result of the multiplication has unsigned overflow, the result
returned is the mathematical result modulo 2\ :sup:`n`\ , where n is the
bit width of the result.

Because LLVM integers use a two's complement representation, and the
result is the same width as the operands, this instruction returns the
correct result for both signed and unsigned integers. If a full product
(e.g. ``i32`` * ``i32`` -> ``i64``) is needed, the operands should be
sign-extended or zero-extended as appropriate to the width of the full
product.

``nuw`` and ``nsw`` stand for "No Unsigned Wrap" and "No Signed Wrap",
respectively. If the ``nuw`` and/or ``nsw`` keywords are present, the
result value of the ``mul`` is a :ref:`poison value <poisonvalues>` if
unsigned and/or signed overflow, respectively, occurs.

Example:
""""""""

.. code-block:: llvm

      <result> = mul i32 4, %var          ; yields i32:result = 4 * %var

.. _i_fmul:

'``fmul``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fmul [fast-math flags]* <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``fmul``' instruction returns the product of its two operands.

Arguments:
""""""""""

The two arguments to the '``fmul``' instruction must be :ref:`floating
point <t_floating>` or :ref:`vector <t_vector>` of floating point values.
Both arguments must have identical types.

Semantics:
""""""""""

The value produced is the floating point product of the two operands.
This instruction can also take any number of :ref:`fast-math
flags <fastmath>`, which are optimization hints to enable otherwise
unsafe floating point optimizations:

Example:
""""""""

.. code-block:: llvm

      <result> = fmul float 4.0, %var          ; yields float:result = 4.0 * %var

'``udiv``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = udiv <ty> <op1>, <op2>         ; yields ty:result
      <result> = udiv exact <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``udiv``' instruction returns the quotient of its two operands.

Arguments:
""""""""""

The two arguments to the '``udiv``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The value produced is the unsigned integer quotient of the two operands.

Note that unsigned integer division and signed integer division are
distinct operations; for signed integer division, use '``sdiv``'.

Division by zero leads to undefined behavior.

If the ``exact`` keyword is present, the result value of the ``udiv`` is
a :ref:`poison value <poisonvalues>` if %op1 is not a multiple of %op2 (as
such, "((a udiv exact b) mul b) == a").

Example:
""""""""

.. code-block:: llvm

      <result> = udiv i32 4, %var          ; yields i32:result = 4 / %var

'``sdiv``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = sdiv <ty> <op1>, <op2>         ; yields ty:result
      <result> = sdiv exact <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``sdiv``' instruction returns the quotient of its two operands.

Arguments:
""""""""""

The two arguments to the '``sdiv``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The value produced is the signed integer quotient of the two operands
rounded towards zero.

Note that signed integer division and unsigned integer division are
distinct operations; for unsigned integer division, use '``udiv``'.

Division by zero leads to undefined behavior. Overflow also leads to
undefined behavior; this is a rare case, but can occur, for example, by
doing a 32-bit division of -2147483648 by -1.

If the ``exact`` keyword is present, the result value of the ``sdiv`` is
a :ref:`poison value <poisonvalues>` if the result would be rounded.

Example:
""""""""

.. code-block:: llvm

      <result> = sdiv i32 4, %var          ; yields i32:result = 4 / %var

.. _i_fdiv:

'``fdiv``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fdiv [fast-math flags]* <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``fdiv``' instruction returns the quotient of its two operands.

Arguments:
""""""""""

The two arguments to the '``fdiv``' instruction must be :ref:`floating
point <t_floating>` or :ref:`vector <t_vector>` of floating point values.
Both arguments must have identical types.

Semantics:
""""""""""

The value produced is the floating point quotient of the two operands.
This instruction can also take any number of :ref:`fast-math
flags <fastmath>`, which are optimization hints to enable otherwise
unsafe floating point optimizations:

Example:
""""""""

.. code-block:: llvm

      <result> = fdiv float 4.0, %var          ; yields float:result = 4.0 / %var

'``urem``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = urem <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``urem``' instruction returns the remainder from the unsigned
division of its two arguments.

Arguments:
""""""""""

The two arguments to the '``urem``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

This instruction returns the unsigned integer *remainder* of a division.
This instruction always performs an unsigned division to get the
remainder.

Note that unsigned integer remainder and signed integer remainder are
distinct operations; for signed integer remainder, use '``srem``'.

Taking the remainder of a division by zero leads to undefined behavior.

Example:
""""""""

.. code-block:: llvm

      <result> = urem i32 4, %var          ; yields i32:result = 4 % %var

'``srem``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = srem <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``srem``' instruction returns the remainder from the signed
division of its two operands. This instruction can also take
:ref:`vector <t_vector>` versions of the values in which case the elements
must be integers.

Arguments:
""""""""""

The two arguments to the '``srem``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

This instruction returns the *remainder* of a division (where the result
is either zero or has the same sign as the dividend, ``op1``), not the
*modulo* operator (where the result is either zero or has the same sign
as the divisor, ``op2``) of a value. For more information about the
difference, see `The Math
Forum <http://mathforum.org/dr.math/problems/anne.4.28.99.html>`_. For a
table of how this is implemented in various languages, please see
`Wikipedia: modulo
operation <http://en.wikipedia.org/wiki/Modulo_operation>`_.

Note that signed integer remainder and unsigned integer remainder are
distinct operations; for unsigned integer remainder, use '``urem``'.

Taking the remainder of a division by zero leads to undefined behavior.
Overflow also leads to undefined behavior; this is a rare case, but can
occur, for example, by taking the remainder of a 32-bit division of
-2147483648 by -1. (The remainder doesn't actually overflow, but this
rule lets srem be implemented using instructions that return both the
result of the division and the remainder.)

Example:
""""""""

.. code-block:: llvm

      <result> = srem i32 4, %var          ; yields i32:result = 4 % %var

.. _i_frem:

'``frem``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = frem [fast-math flags]* <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``frem``' instruction returns the remainder from the division of
its two operands.

Arguments:
""""""""""

The two arguments to the '``frem``' instruction must be :ref:`floating
point <t_floating>` or :ref:`vector <t_vector>` of floating point values.
Both arguments must have identical types.

Semantics:
""""""""""

This instruction returns the *remainder* of a division. The remainder
has the same sign as the dividend. This instruction can also take any
number of :ref:`fast-math flags <fastmath>`, which are optimization hints
to enable otherwise unsafe floating point optimizations:

Example:
""""""""

.. code-block:: llvm

      <result> = frem float 4.0, %var          ; yields float:result = 4.0 % %var

.. _bitwiseops:

Bitwise Binary Operations
-------------------------

Bitwise binary operators are used to do various forms of bit-twiddling
in a program. They are generally very efficient instructions and can
commonly be strength reduced from other instructions. They require two
operands of the same type, execute an operation on them, and produce a
single value. The resulting value is the same type as its operands.

'``shl``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = shl <ty> <op1>, <op2>           ; yields ty:result
      <result> = shl nuw <ty> <op1>, <op2>       ; yields ty:result
      <result> = shl nsw <ty> <op1>, <op2>       ; yields ty:result
      <result> = shl nuw nsw <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``shl``' instruction returns the first operand shifted to the left
a specified number of bits.

Arguments:
""""""""""

Both arguments to the '``shl``' instruction must be the same
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer type.
'``op2``' is treated as an unsigned value.

Semantics:
""""""""""

The value produced is ``op1`` \* 2\ :sup:`op2` mod 2\ :sup:`n`,
where ``n`` is the width of the result. If ``op2`` is (statically or
dynamically) equal to or larger than the number of bits in
``op1``, the result is undefined. If the arguments are vectors, each
vector element of ``op1`` is shifted by the corresponding shift amount
in ``op2``.

If the ``nuw`` keyword is present, then the shift produces a :ref:`poison
value <poisonvalues>` if it shifts out any non-zero bits. If the
``nsw`` keyword is present, then the shift produces a :ref:`poison
value <poisonvalues>` if it shifts out any bits that disagree with the
resultant sign bit. As such, NUW/NSW have the same semantics as they
would if the shift were expressed as a mul instruction with the same
nsw/nuw bits in (mul %op1, (shl 1, %op2)).

Example:
""""""""

.. code-block:: llvm

      <result> = shl i32 4, %var   ; yields i32: 4 << %var
      <result> = shl i32 4, 2      ; yields i32: 16
      <result> = shl i32 1, 10     ; yields i32: 1024
      <result> = shl i32 1, 32     ; undefined
      <result> = shl <2 x i32> < i32 1, i32 1>, < i32 1, i32 2>   ; yields: result=<2 x i32> < i32 2, i32 4>

'``lshr``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = lshr <ty> <op1>, <op2>         ; yields ty:result
      <result> = lshr exact <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``lshr``' instruction (logical shift right) returns the first
operand shifted to the right a specified number of bits with zero fill.

Arguments:
""""""""""

Both arguments to the '``lshr``' instruction must be the same
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer type.
'``op2``' is treated as an unsigned value.

Semantics:
""""""""""

This instruction always performs a logical shift right operation. The
most significant bits of the result will be filled with zero bits after
the shift. If ``op2`` is (statically or dynamically) equal to or larger
than the number of bits in ``op1``, the result is undefined. If the
arguments are vectors, each vector element of ``op1`` is shifted by the
corresponding shift amount in ``op2``.

If the ``exact`` keyword is present, the result value of the ``lshr`` is
a :ref:`poison value <poisonvalues>` if any of the bits shifted out are
non-zero.

Example:
""""""""

.. code-block:: llvm

      <result> = lshr i32 4, 1   ; yields i32:result = 2
      <result> = lshr i32 4, 2   ; yields i32:result = 1
      <result> = lshr i8  4, 3   ; yields i8:result = 0
      <result> = lshr i8 -2, 1   ; yields i8:result = 0x7F
      <result> = lshr i32 1, 32  ; undefined
      <result> = lshr <2 x i32> < i32 -2, i32 4>, < i32 1, i32 2>   ; yields: result=<2 x i32> < i32 0x7FFFFFFF, i32 1>

'``ashr``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = ashr <ty> <op1>, <op2>         ; yields ty:result
      <result> = ashr exact <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``ashr``' instruction (arithmetic shift right) returns the first
operand shifted to the right a specified number of bits with sign
extension.

Arguments:
""""""""""

Both arguments to the '``ashr``' instruction must be the same
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer type.
'``op2``' is treated as an unsigned value.

Semantics:
""""""""""

This instruction always performs an arithmetic shift right operation,
The most significant bits of the result will be filled with the sign bit
of ``op1``. If ``op2`` is (statically or dynamically) equal to or larger
than the number of bits in ``op1``, the result is undefined. If the
arguments are vectors, each vector element of ``op1`` is shifted by the
corresponding shift amount in ``op2``.

If the ``exact`` keyword is present, the result value of the ``ashr`` is
a :ref:`poison value <poisonvalues>` if any of the bits shifted out are
non-zero.

Example:
""""""""

.. code-block:: llvm

      <result> = ashr i32 4, 1   ; yields i32:result = 2
      <result> = ashr i32 4, 2   ; yields i32:result = 1
      <result> = ashr i8  4, 3   ; yields i8:result = 0
      <result> = ashr i8 -2, 1   ; yields i8:result = -1
      <result> = ashr i32 1, 32  ; undefined
      <result> = ashr <2 x i32> < i32 -2, i32 4>, < i32 1, i32 3>   ; yields: result=<2 x i32> < i32 -1, i32 0>

'``and``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = and <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``and``' instruction returns the bitwise logical and of its two
operands.

Arguments:
""""""""""

The two arguments to the '``and``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The truth table used for the '``and``' instruction is:

+-----+-----+-----+
| In0 | In1 | Out |
+-----+-----+-----+
|   0 |   0 |   0 |
+-----+-----+-----+
|   0 |   1 |   0 |
+-----+-----+-----+
|   1 |   0 |   0 |
+-----+-----+-----+
|   1 |   1 |   1 |
+-----+-----+-----+

Example:
""""""""

.. code-block:: llvm

      <result> = and i32 4, %var         ; yields i32:result = 4 & %var
      <result> = and i32 15, 40          ; yields i32:result = 8
      <result> = and i32 4, 8            ; yields i32:result = 0

'``or``' Instruction
^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = or <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``or``' instruction returns the bitwise logical inclusive or of its
two operands.

Arguments:
""""""""""

The two arguments to the '``or``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The truth table used for the '``or``' instruction is:

+-----+-----+-----+
| In0 | In1 | Out |
+-----+-----+-----+
|   0 |   0 |   0 |
+-----+-----+-----+
|   0 |   1 |   1 |
+-----+-----+-----+
|   1 |   0 |   1 |
+-----+-----+-----+
|   1 |   1 |   1 |
+-----+-----+-----+

Example:
""""""""

::

      <result> = or i32 4, %var         ; yields i32:result = 4 | %var
      <result> = or i32 15, 40          ; yields i32:result = 47
      <result> = or i32 4, 8            ; yields i32:result = 12

'``xor``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = xor <ty> <op1>, <op2>   ; yields ty:result

Overview:
"""""""""

The '``xor``' instruction returns the bitwise logical exclusive or of
its two operands. The ``xor`` is used to implement the "one's
complement" operation, which is the "~" operator in C.

Arguments:
""""""""""

The two arguments to the '``xor``' instruction must be
:ref:`integer <t_integer>` or :ref:`vector <t_vector>` of integer values. Both
arguments must have identical types.

Semantics:
""""""""""

The truth table used for the '``xor``' instruction is:

+-----+-----+-----+
| In0 | In1 | Out |
+-----+-----+-----+
|   0 |   0 |   0 |
+-----+-----+-----+
|   0 |   1 |   1 |
+-----+-----+-----+
|   1 |   0 |   1 |
+-----+-----+-----+
|   1 |   1 |   0 |
+-----+-----+-----+

Example:
""""""""

.. code-block:: llvm

      <result> = xor i32 4, %var         ; yields i32:result = 4 ^ %var
      <result> = xor i32 15, 40          ; yields i32:result = 39
      <result> = xor i32 4, 8            ; yields i32:result = 12
      <result> = xor i32 %V, -1          ; yields i32:result = ~%V

Vector Operations
-----------------

LLVM supports several instructions to represent vector operations in a
target-independent manner. These instructions cover the element-access
and vector-specific operations needed to process vectors effectively.
While LLVM does directly support these vector operations, many
sophisticated algorithms will want to use target-specific intrinsics to
take full advantage of a specific target.

.. _i_extractelement:

'``extractelement``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = extractelement <n x <ty>> <val>, <ty2> <idx>  ; yields <ty>

Overview:
"""""""""

The '``extractelement``' instruction extracts a single scalar element
from a vector at a specified index.

Arguments:
""""""""""

The first operand of an '``extractelement``' instruction is a value of
:ref:`vector <t_vector>` type. The second operand is an index indicating
the position from which to extract the element. The index may be a
variable of any integer type.

Semantics:
""""""""""

The result is a scalar of the same type as the element type of ``val``.
Its value is the value at position ``idx`` of ``val``. If ``idx``
exceeds the length of ``val``, the results are undefined.

Example:
""""""""

.. code-block:: llvm

      <result> = extractelement <4 x i32> %vec, i32 0    ; yields i32

.. _i_insertelement:

'``insertelement``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = insertelement <n x <ty>> <val>, <ty> <elt>, <ty2> <idx>    ; yields <n x <ty>>

Overview:
"""""""""

The '``insertelement``' instruction inserts a scalar element into a
vector at a specified index.

Arguments:
""""""""""

The first operand of an '``insertelement``' instruction is a value of
:ref:`vector <t_vector>` type. The second operand is a scalar value whose
type must equal the element type of the first operand. The third operand
is an index indicating the position at which to insert the value. The
index may be a variable of any integer type.

Semantics:
""""""""""

The result is a vector of the same type as ``val``. Its element values
are those of ``val`` except at position ``idx``, where it gets the value
``elt``. If ``idx`` exceeds the length of ``val``, the results are
undefined.

Example:
""""""""

.. code-block:: llvm

      <result> = insertelement <4 x i32> %vec, i32 1, i32 0    ; yields <4 x i32>

.. _i_shufflevector:

'``shufflevector``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = shufflevector <n x <ty>> <v1>, <n x <ty>> <v2>, <m x i32> <mask>    ; yields <m x <ty>>

Overview:
"""""""""

The '``shufflevector``' instruction constructs a permutation of elements
from two input vectors, returning a vector with the same element type as
the input and length that is the same as the shuffle mask.

Arguments:
""""""""""

The first two operands of a '``shufflevector``' instruction are vectors
with the same type. The third argument is a shuffle mask whose element
type is always 'i32'. The result of the instruction is a vector whose
length is the same as the shuffle mask and whose element type is the
same as the element type of the first two operands.

The shuffle mask operand is required to be a constant vector with either
constant integer or undef values.

Semantics:
""""""""""

The elements of the two input vectors are numbered from left to right
across both of the vectors. The shuffle mask operand specifies, for each
element of the result vector, which element of the two input vectors the
result element gets. The element selector may be undef (meaning "don't
care") and the second operand may be undef if performing a shuffle from
only one vector.

Example:
""""""""

.. code-block:: llvm

      <result> = shufflevector <4 x i32> %v1, <4 x i32> %v2,
                              <4 x i32> <i32 0, i32 4, i32 1, i32 5>  ; yields <4 x i32>
      <result> = shufflevector <4 x i32> %v1, <4 x i32> undef,
                              <4 x i32> <i32 0, i32 1, i32 2, i32 3>  ; yields <4 x i32> - Identity shuffle.
      <result> = shufflevector <8 x i32> %v1, <8 x i32> undef,
                              <4 x i32> <i32 0, i32 1, i32 2, i32 3>  ; yields <4 x i32>
      <result> = shufflevector <4 x i32> %v1, <4 x i32> %v2,
                              <8 x i32> <i32 0, i32 1, i32 2, i32 3, i32 4, i32 5, i32 6, i32 7 >  ; yields <8 x i32>

Aggregate Operations
--------------------

LLVM supports several instructions for working with
:ref:`aggregate <t_aggregate>` values.

.. _i_extractvalue:

'``extractvalue``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = extractvalue <aggregate type> <val>, <idx>{, <idx>}*

Overview:
"""""""""

The '``extractvalue``' instruction extracts the value of a member field
from an :ref:`aggregate <t_aggregate>` value.

Arguments:
""""""""""

The first operand of an '``extractvalue``' instruction is a value of
:ref:`struct <t_struct>` or :ref:`array <t_array>` type. The operands are
constant indices to specify which value to extract in a similar manner
as indices in a '``getelementptr``' instruction.

The major differences to ``getelementptr`` indexing are:

-  Since the value being indexed is not a pointer, the first index is
   omitted and assumed to be zero.
-  At least one index must be specified.
-  Not only struct indices but also array indices must be in bounds.

Semantics:
""""""""""

The result is the value at the position in the aggregate specified by
the index operands.

Example:
""""""""

.. code-block:: llvm

      <result> = extractvalue {i32, float} %agg, 0    ; yields i32

.. _i_insertvalue:

'``insertvalue``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = insertvalue <aggregate type> <val>, <ty> <elt>, <idx>{, <idx>}*    ; yields <aggregate type>

Overview:
"""""""""

The '``insertvalue``' instruction inserts a value into a member field in
an :ref:`aggregate <t_aggregate>` value.

Arguments:
""""""""""

The first operand of an '``insertvalue``' instruction is a value of
:ref:`struct <t_struct>` or :ref:`array <t_array>` type. The second operand is
a first-class value to insert. The following operands are constant
indices indicating the position at which to insert the value in a
similar manner as indices in a '``extractvalue``' instruction. The value
to insert must have the same type as the value identified by the
indices.

Semantics:
""""""""""

The result is an aggregate of the same type as ``val``. Its value is
that of ``val`` except that the value at the position specified by the
indices is that of ``elt``.

Example:
""""""""

.. code-block:: llvm

      %agg1 = insertvalue {i32, float} undef, i32 1, 0              ; yields {i32 1, float undef}
      %agg2 = insertvalue {i32, float} %agg1, float %val, 1         ; yields {i32 1, float %val}
      %agg3 = insertvalue {i32, {float}} undef, float %val, 1, 0    ; yields {i32 undef, {float %val}}

.. _memoryops:

Memory Access and Addressing Operations
---------------------------------------

A key design point of an SSA-based representation is how it represents
memory. In LLVM, no memory locations are in SSA form, which makes things
very simple. This section describes how to read, write, and allocate
memory in LLVM.

.. _i_alloca:

'``alloca``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = alloca [inalloca] <type> [, <ty> <NumElements>] [, align <alignment>]     ; yields type*:result

Overview:
"""""""""

The '``alloca``' instruction allocates memory on the stack frame of the
currently executing function, to be automatically released when this
function returns to its caller. The object is always allocated in the
generic address space (address space zero).

Arguments:
""""""""""

The '``alloca``' instruction allocates ``sizeof(<type>)*NumElements``
bytes of memory on the runtime stack, returning a pointer of the
appropriate type to the program. If "NumElements" is specified, it is
the number of elements allocated, otherwise "NumElements" is defaulted
to be one. If a constant alignment is specified, the value result of the
allocation is guaranteed to be aligned to at least that boundary. The
alignment may not be greater than ``1 << 29``. If not specified, or if
zero, the target can choose to align the allocation on any convenient
boundary compatible with the type.

'``type``' may be any sized type.

Semantics:
""""""""""

Memory is allocated; a pointer is returned. The operation is undefined
if there is insufficient stack space for the allocation. '``alloca``'d
memory is automatically released when the function returns. The
'``alloca``' instruction is commonly used to represent automatic
variables that must have an address available. When the function returns
(either with the ``ret`` or ``resume`` instructions), the memory is
reclaimed. Allocating zero bytes is legal, but the result is undefined.
The order in which memory is allocated (ie., which way the stack grows)
is not specified.

Example:
""""""""

.. code-block:: llvm

      %ptr = alloca i32                             ; yields i32*:ptr
      %ptr = alloca i32, i32 4                      ; yields i32*:ptr
      %ptr = alloca i32, i32 4, align 1024          ; yields i32*:ptr
      %ptr = alloca i32, align 1024                 ; yields i32*:ptr

.. _i_load:

'``load``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = load [volatile] <ty>, <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.load !<index>][, !nonnull !<index>][, !dereferenceable !<index>][, !dereferenceable_or_null !<index>]
      <result> = load atomic [volatile] <ty>* <pointer> [singlethread] <ordering>, align <alignment>
      !<index> = !{ i32 1 }

Overview:
"""""""""

The '``load``' instruction is used to read from memory.

Arguments:
""""""""""

The argument to the ``load`` instruction specifies the memory address
from which to load. The type specified must be a :ref:`first
class <t_firstclass>` type. If the ``load`` is marked as ``volatile``,
then the optimizer is not allowed to modify the number or order of
execution of this ``load`` with other :ref:`volatile
operations <volatile>`.

If the ``load`` is marked as ``atomic``, it takes an extra
:ref:`ordering <ordering>` and optional ``singlethread`` argument. The
``release`` and ``acq_rel`` orderings are not valid on ``load``
instructions. Atomic loads produce :ref:`defined <memmodel>` results
when they may see multiple atomic stores. The type of the pointee must
be an integer type whose bit width is a power of two greater than or
equal to eight and less than or equal to a target-specific size limit.
``align`` must be explicitly specified on atomic loads, and the load has
undefined behavior if the alignment is not set to a value which is at
least the size in bytes of the pointee. ``!nontemporal`` does not have
any defined semantics for atomic loads.

The optional constant ``align`` argument specifies the alignment of the
operation (that is, the alignment of the memory address). A value of 0
or an omitted ``align`` argument means that the operation has the ABI
alignment for the target. It is the responsibility of the code emitter
to ensure that the alignment information is correct. Overestimating the
alignment results in undefined behavior. Underestimating the alignment
may produce less efficient code. An alignment of 1 is always safe. The
maximum possible alignment is ``1 << 29``.

The optional ``!nontemporal`` metadata must reference a single
metadata name ``<index>`` corresponding to a metadata node with one
``i32`` entry of value 1. The existence of the ``!nontemporal``
metadata on the instruction tells the optimizer and code generator
that this load is not expected to be reused in the cache. The code
generator may select special instructions to save cache bandwidth, such
as the ``MOVNT`` instruction on x86.

The optional ``!invariant.load`` metadata must reference a single
metadata name ``<index>`` corresponding to a metadata node with no
entries. The existence of the ``!invariant.load`` metadata on the
instruction tells the optimizer and code generator that the address
operand to this load points to memory which can be assumed unchanged.
Being invariant does not imply that a location is dereferenceable,
but it does imply that once the location is known dereferenceable
its value is henceforth unchanging.

The optional ``!nonnull`` metadata must reference a single
metadata name ``<index>`` corresponding to a metadata node with no
entries. The existence of the ``!nonnull`` metadata on the
instruction tells the optimizer that the value loaded is known to
never be null. This is analogous to the ''nonnull'' attribute
on parameters and return values. This metadata can only be applied
to loads of a pointer type.

The optional ``!dereferenceable`` metadata must reference a single
metadata name ``<index>`` corresponding to a metadata node with one ``i64``
entry. The existence of the ``!dereferenceable`` metadata on the instruction
tells the optimizer that the value loaded is known to be dereferenceable.
The number of bytes known to be dereferenceable is specified by the integer
value in the metadata node. This is analogous to the ''dereferenceable''
attribute on parameters and return values. This metadata can only be applied
to loads of a pointer type.

The optional ``!dereferenceable_or_null`` metadata must reference a single
metadata name ``<index>`` corresponding to a metadata node with one ``i64``
entry. The existence of the ``!dereferenceable_or_null`` metadata on the
instruction tells the optimizer that the value loaded is known to be either
dereferenceable or null.
The number of bytes known to be dereferenceable is specified by the integer
value in the metadata node. This is analogous to the ''dereferenceable_or_null''
attribute on parameters and return values. This metadata can only be applied
to loads of a pointer type.

Semantics:
""""""""""

The location of memory pointed to is loaded. If the value being loaded
is of scalar type then the number of bytes read does not exceed the
minimum number of bytes needed to hold all bits of the type. For
example, loading an ``i24`` reads at most three bytes. When loading a
value of a type like ``i20`` with a size that is not an integral number
of bytes, the result is undefined if the value was not originally
written using a store of the same type.

Examples:
"""""""""

.. code-block:: llvm

      %ptr = alloca i32                               ; yields i32*:ptr
      store i32 3, i32* %ptr                          ; yields void
      %val = load i32, i32* %ptr                      ; yields i32:val = i32 3

.. _i_store:

'``store``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      store [volatile] <ty> <value>, <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>]        ; yields void
      store atomic [volatile] <ty> <value>, <ty>* <pointer> [singlethread] <ordering>, align <alignment>  ; yields void

Overview:
"""""""""

The '``store``' instruction is used to write to memory.

Arguments:
""""""""""

There are two arguments to the ``store`` instruction: a value to store
and an address at which to store it. The type of the ``<pointer>``
operand must be a pointer to the :ref:`first class <t_firstclass>` type of
the ``<value>`` operand. If the ``store`` is marked as ``volatile``,
then the optimizer is not allowed to modify the number or order of
execution of this ``store`` with other :ref:`volatile
operations <volatile>`.

If the ``store`` is marked as ``atomic``, it takes an extra
:ref:`ordering <ordering>` and optional ``singlethread`` argument. The
``acquire`` and ``acq_rel`` orderings aren't valid on ``store``
instructions. Atomic loads produce :ref:`defined <memmodel>` results
when they may see multiple atomic stores. The type of the pointee must
be an integer type whose bit width is a power of two greater than or
equal to eight and less than or equal to a target-specific size limit.
``align`` must be explicitly specified on atomic stores, and the store
has undefined behavior if the alignment is not set to a value which is
at least the size in bytes of the pointee. ``!nontemporal`` does not
have any defined semantics for atomic stores.

The optional constant ``align`` argument specifies the alignment of the
operation (that is, the alignment of the memory address). A value of 0
or an omitted ``align`` argument means that the operation has the ABI
alignment for the target. It is the responsibility of the code emitter
to ensure that the alignment information is correct. Overestimating the
alignment results in undefined behavior. Underestimating the
alignment may produce less efficient code. An alignment of 1 is always
safe. The maximum possible alignment is ``1 << 29``.

The optional ``!nontemporal`` metadata must reference a single metadata
name ``<index>`` corresponding to a metadata node with one ``i32`` entry of
value 1. The existence of the ``!nontemporal`` metadata on the instruction
tells the optimizer and code generator that this load is not expected to
be reused in the cache. The code generator may select special
instructions to save cache bandwidth, such as the MOVNT instruction on
x86.

Semantics:
""""""""""

The contents of memory are updated to contain ``<value>`` at the
location specified by the ``<pointer>`` operand. If ``<value>`` is
of scalar type then the number of bytes written does not exceed the
minimum number of bytes needed to hold all bits of the type. For
example, storing an ``i24`` writes at most three bytes. When writing a
value of a type like ``i20`` with a size that is not an integral number
of bytes, it is unspecified what happens to the extra bits that do not
belong to the type, but they will typically be overwritten.

Example:
""""""""

.. code-block:: llvm

      %ptr = alloca i32                               ; yields i32*:ptr
      store i32 3, i32* %ptr                          ; yields void
      %val = load i32, i32* %ptr                      ; yields i32:val = i32 3

.. _i_fence:

'``fence``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      fence [singlethread] <ordering>                   ; yields void

Overview:
"""""""""

The '``fence``' instruction is used to introduce happens-before edges
between operations.

Arguments:
""""""""""

'``fence``' instructions take an :ref:`ordering <ordering>` argument which
defines what *synchronizes-with* edges they add. They can only be given
``acquire``, ``release``, ``acq_rel``, and ``seq_cst`` orderings.

Semantics:
""""""""""

A fence A which has (at least) ``release`` ordering semantics
*synchronizes with* a fence B with (at least) ``acquire`` ordering
semantics if and only if there exist atomic operations X and Y, both
operating on some atomic object M, such that A is sequenced before X, X
modifies M (either directly or through some side effect of a sequence
headed by X), Y is sequenced before B, and Y observes M. This provides a
*happens-before* dependency between A and B. Rather than an explicit
``fence``, one (but not both) of the atomic operations X or Y might
provide a ``release`` or ``acquire`` (resp.) ordering constraint and
still *synchronize-with* the explicit ``fence`` and establish the
*happens-before* edge.

A ``fence`` which has ``seq_cst`` ordering, in addition to having both
``acquire`` and ``release`` semantics specified above, participates in
the global program order of other ``seq_cst`` operations and/or fences.

The optional ":ref:`singlethread <singlethread>`" argument specifies
that the fence only synchronizes with other fences in the same thread.
(This is useful for interacting with signal handlers.)

Example:
""""""""

.. code-block:: llvm

      fence acquire                          ; yields void
      fence singlethread seq_cst             ; yields void

.. _i_cmpxchg:

'``cmpxchg``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      cmpxchg [weak] [volatile] <ty>* <pointer>, <ty> <cmp>, <ty> <new> [singlethread] <success ordering> <failure ordering> ; yields  { ty, i1 }

Overview:
"""""""""

The '``cmpxchg``' instruction is used to atomically modify memory. It
loads a value in memory and compares it to a given value. If they are
equal, it tries to store a new value into the memory.

Arguments:
""""""""""

There are three arguments to the '``cmpxchg``' instruction: an address
to operate on, a value to compare to the value currently be at that
address, and a new value to place at that address if the compared values
are equal. The type of '<cmp>' must be an integer type whose bit width
is a power of two greater than or equal to eight and less than or equal
to a target-specific size limit. '<cmp>' and '<new>' must have the same
type, and the type of '<pointer>' must be a pointer to that type. If the
``cmpxchg`` is marked as ``volatile``, then the optimizer is not allowed
to modify the number or order of execution of this ``cmpxchg`` with
other :ref:`volatile operations <volatile>`.

The success and failure :ref:`ordering <ordering>` arguments specify how this
``cmpxchg`` synchronizes with other atomic operations. Both ordering parameters
must be at least ``monotonic``, the ordering constraint on failure must be no
stronger than that on success, and the failure ordering cannot be either
``release`` or ``acq_rel``.

The optional "``singlethread``" argument declares that the ``cmpxchg``
is only atomic with respect to code (usually signal handlers) running in
the same thread as the ``cmpxchg``. Otherwise the cmpxchg is atomic with
respect to all other code in the system.

The pointer passed into cmpxchg must have alignment greater than or
equal to the size in memory of the operand.

Semantics:
""""""""""

The contents of memory at the location specified by the '``<pointer>``' operand
is read and compared to '``<cmp>``'; if the read value is the equal, the
'``<new>``' is written. The original value at the location is returned, together
with a flag indicating success (true) or failure (false).

If the cmpxchg operation is marked as ``weak`` then a spurious failure is
permitted: the operation may not write ``<new>`` even if the comparison
matched.

If the cmpxchg operation is strong (the default), the i1 value is 1 if and only
if the value loaded equals ``cmp``.

A successful ``cmpxchg`` is a read-modify-write instruction for the purpose of
identifying release sequences. A failed ``cmpxchg`` is equivalent to an atomic
load with an ordering parameter determined the second ordering parameter.

Example:
""""""""

.. code-block:: llvm

    entry:
      %orig = atomic load i32, i32* %ptr unordered                ; yields i32
      br label %loop

    loop:
      %cmp = phi i32 [ %orig, %entry ], [%old, %loop]
      %squared = mul i32 %cmp, %cmp
      %val_success = cmpxchg i32* %ptr, i32 %cmp, i32 %squared acq_rel monotonic ; yields  { i32, i1 }
      %value_loaded = extractvalue { i32, i1 } %val_success, 0
      %success = extractvalue { i32, i1 } %val_success, 1
      br i1 %success, label %done, label %loop

    done:
      ...

.. _i_atomicrmw:

'``atomicrmw``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      atomicrmw [volatile] <operation> <ty>* <pointer>, <ty> <value> [singlethread] <ordering>                   ; yields ty

Overview:
"""""""""

The '``atomicrmw``' instruction is used to atomically modify memory.

Arguments:
""""""""""

There are three arguments to the '``atomicrmw``' instruction: an
operation to apply, an address whose value to modify, an argument to the
operation. The operation must be one of the following keywords:

-  xchg
-  add
-  sub
-  and
-  nand
-  or
-  xor
-  max
-  min
-  umax
-  umin

The type of '<value>' must be an integer type whose bit width is a power
of two greater than or equal to eight and less than or equal to a
target-specific size limit. The type of the '``<pointer>``' operand must
be a pointer to that type. If the ``atomicrmw`` is marked as
``volatile``, then the optimizer is not allowed to modify the number or
order of execution of this ``atomicrmw`` with other :ref:`volatile
operations <volatile>`.

Semantics:
""""""""""

The contents of memory at the location specified by the '``<pointer>``'
operand are atomically read, modified, and written back. The original
value at the location is returned. The modification is specified by the
operation argument:

-  xchg: ``*ptr = val``
-  add: ``*ptr = *ptr + val``
-  sub: ``*ptr = *ptr - val``
-  and: ``*ptr = *ptr & val``
-  nand: ``*ptr = ~(*ptr & val)``
-  or: ``*ptr = *ptr | val``
-  xor: ``*ptr = *ptr ^ val``
-  max: ``*ptr = *ptr > val ? *ptr : val`` (using a signed comparison)
-  min: ``*ptr = *ptr < val ? *ptr : val`` (using a signed comparison)
-  umax: ``*ptr = *ptr > val ? *ptr : val`` (using an unsigned
   comparison)
-  umin: ``*ptr = *ptr < val ? *ptr : val`` (using an unsigned
   comparison)

Example:
""""""""

.. code-block:: llvm

      %old = atomicrmw add i32* %ptr, i32 1 acquire                        ; yields i32

.. _i_getelementptr:

'``getelementptr``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = getelementptr <ty>, <ty>* <ptrval>{, <ty> <idx>}*
      <result> = getelementptr inbounds <ty>, <ty>* <ptrval>{, <ty> <idx>}*
      <result> = getelementptr <ty>, <ptr vector> <ptrval>, <vector index type> <idx>

Overview:
"""""""""

The '``getelementptr``' instruction is used to get the address of a
subelement of an :ref:`aggregate <t_aggregate>` data structure. It performs
address calculation only and does not access memory. The instruction can also
be used to calculate a vector of such addresses.

Arguments:
""""""""""

The first argument is always a type used as the basis for the calculations.
The second argument is always a pointer or a vector of pointers, and is the
base address to start from. The remaining arguments are indices
that indicate which of the elements of the aggregate object are indexed.
The interpretation of each index is dependent on the type being indexed
into. The first index always indexes the pointer value given as the
first argument, the second index indexes a value of the type pointed to
(not necessarily the value directly pointed to, since the first index
can be non-zero), etc. The first type indexed into must be a pointer
value, subsequent types can be arrays, vectors, and structs. Note that
subsequent types being indexed into can never be pointers, since that
would require loading the pointer before continuing calculation.

The type of each index argument depends on the type it is indexing into.
When indexing into a (optionally packed) structure, only ``i32`` integer
**constants** are allowed (when using a vector of indices they must all
be the **same** ``i32`` integer constant). When indexing into an array,
pointer or vector, integers of any width are allowed, and they are not
required to be constant. These integers are treated as signed values
where relevant.

For example, let's consider a C code fragment and how it gets compiled
to LLVM:

.. code-block:: c

    struct RT {
      char A;
      int B[10][20];
      char C;
    };
    struct ST {
      int X;
      double Y;
      struct RT Z;
    };

    int *foo(struct ST *s) {
      return &s[1].Z.B[5][13];
    }

The LLVM code generated by Clang is:

.. code-block:: llvm

    %struct.RT = type { i8, [10 x [20 x i32]], i8 }
    %struct.ST = type { i32, double, %struct.RT }

    define i32* @foo(%struct.ST* %s) nounwind uwtable readnone optsize ssp {
    entry:
      %arrayidx = getelementptr inbounds %struct.ST, %struct.ST* %s, i64 1, i32 2, i32 1, i64 5, i64 13
      ret i32* %arrayidx
    }

Semantics:
""""""""""

In the example above, the first index is indexing into the
'``%struct.ST*``' type, which is a pointer, yielding a '``%struct.ST``'
= '``{ i32, double, %struct.RT }``' type, a structure. The second index
indexes into the third element of the structure, yielding a
'``%struct.RT``' = '``{ i8 , [10 x [20 x i32]], i8 }``' type, another
structure. The third index indexes into the second element of the
structure, yielding a '``[10 x [20 x i32]]``' type, an array. The two
dimensions of the array are subscripted into, yielding an '``i32``'
type. The '``getelementptr``' instruction returns a pointer to this
element, thus computing a value of '``i32*``' type.

Note that it is perfectly legal to index partially through a structure,
returning a pointer to an inner element. Because of this, the LLVM code
for the given testcase is equivalent to:

.. code-block:: llvm

    define i32* @foo(%struct.ST* %s) {
      %t1 = getelementptr %struct.ST, %struct.ST* %s, i32 1                        ; yields %struct.ST*:%t1
      %t2 = getelementptr %struct.ST, %struct.ST* %t1, i32 0, i32 2                ; yields %struct.RT*:%t2
      %t3 = getelementptr %struct.RT, %struct.RT* %t2, i32 0, i32 1                ; yields [10 x [20 x i32]]*:%t3
      %t4 = getelementptr [10 x [20 x i32]], [10 x [20 x i32]]* %t3, i32 0, i32 5  ; yields [20 x i32]*:%t4
      %t5 = getelementptr [20 x i32], [20 x i32]* %t4, i32 0, i32 13               ; yields i32*:%t5
      ret i32* %t5
    }

If the ``inbounds`` keyword is present, the result value of the
``getelementptr`` is a :ref:`poison value <poisonvalues>` if the base
pointer is not an *in bounds* address of an allocated object, or if any
of the addresses that would be formed by successive addition of the
offsets implied by the indices to the base address with infinitely
precise signed arithmetic are not an *in bounds* address of that
allocated object. The *in bounds* addresses for an allocated object are
all the addresses that point into the object, plus the address one byte
past the end. In cases where the base is a vector of pointers the
``inbounds`` keyword applies to each of the computations element-wise.

If the ``inbounds`` keyword is not present, the offsets are added to the
base address with silently-wrapping two's complement arithmetic. If the
offsets have a different width from the pointer, they are sign-extended
or truncated to the width of the pointer. The result value of the
``getelementptr`` may be outside the object pointed to by the base
pointer. The result value may not necessarily be used to access memory
though, even if it happens to point into allocated storage. See the
:ref:`Pointer Aliasing Rules <pointeraliasing>` section for more
information.

The getelementptr instruction is often confusing. For some more insight
into how it works, see :doc:`the getelementptr FAQ <GetElementPtr>`.

Example:
""""""""

.. code-block:: llvm

        ; yields [12 x i8]*:aptr
        %aptr = getelementptr {i32, [12 x i8]}, {i32, [12 x i8]}* %saptr, i64 0, i32 1
        ; yields i8*:vptr
        %vptr = getelementptr {i32, <2 x i8>}, {i32, <2 x i8>}* %svptr, i64 0, i32 1, i32 1
        ; yields i8*:eptr
        %eptr = getelementptr [12 x i8], [12 x i8]* %aptr, i64 0, i32 1
        ; yields i32*:iptr
        %iptr = getelementptr [10 x i32], [10 x i32]* @arr, i16 0, i16 0

Vector of pointers:
"""""""""""""""""""

The ``getelementptr`` returns a vector of pointers, instead of a single address,
when one or more of its arguments is a vector. In such cases, all vector
arguments should have the same number of elements, and every scalar argument
will be effectively broadcast into a vector during address calculation.

.. code-block:: llvm

     ; All arguments are vectors:
     ;   A[i] = ptrs[i] + offsets[i]*sizeof(i8)
     %A = getelementptr i8, <4 x i8*> %ptrs, <4 x i64> %offsets

     ; Add the same scalar offset to each pointer of a vector:
     ;   A[i] = ptrs[i] + offset*sizeof(i8)
     %A = getelementptr i8, <4 x i8*> %ptrs, i64 %offset

     ; Add distinct offsets to the same pointer:
     ;   A[i] = ptr + offsets[i]*sizeof(i8)
     %A = getelementptr i8, i8* %ptr, <4 x i64> %offsets

     ; In all cases described above the type of the result is <4 x i8*>

The two following instructions are equivalent:

.. code-block:: llvm

     getelementptr  %struct.ST, <4 x %struct.ST*> %s, <4 x i64> %ind1,
       <4 x i32> <i32 2, i32 2, i32 2, i32 2>,
       <4 x i32> <i32 1, i32 1, i32 1, i32 1>,
       <4 x i32> %ind4,
       <4 x i64> <i64 13, i64 13, i64 13, i64 13>

     getelementptr  %struct.ST, <4 x %struct.ST*> %s, <4 x i64> %ind1,
       i32 2, i32 1, <4 x i32> %ind4, i64 13

Let's look at the C code, where the vector version of ``getelementptr``
makes sense:

.. code-block:: c

    // Let's assume that we vectorize the following loop:
    double *A, B; int *C;
    for (int i = 0; i < size; ++i) {
      A[i] = B[C[i]];
    }

.. code-block:: llvm

    ; get pointers for 8 elements from array B
    %ptrs = getelementptr double, double* %B, <8 x i32> %C
    ; load 8 elements from array B into A
    %A = call <8 x double> @llvm.masked.gather.v8f64(<8 x double*> %ptrs,
         i32 8, <8 x i1> %mask, <8 x double> %passthru)

Conversion Operations
---------------------

The instructions in this category are the conversion instructions
(casting) which all take a single operand and a type. They perform
various bit conversions on the operand.

'``trunc .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = trunc <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``trunc``' instruction truncates its operand to the type ``ty2``.

Arguments:
""""""""""

The '``trunc``' instruction takes a value to trunc, and a type to trunc
it to. Both types must be of :ref:`integer <t_integer>` types, or vectors
of the same number of integers. The bit size of the ``value`` must be
larger than the bit size of the destination type, ``ty2``. Equal sized
types are not allowed.

Semantics:
""""""""""

The '``trunc``' instruction truncates the high order bits in ``value``
and converts the remaining bits to ``ty2``. Since the source size must
be larger than the destination size, ``trunc`` cannot be a *no-op cast*.
It will always truncate bits.

Example:
""""""""

.. code-block:: llvm

      %X = trunc i32 257 to i8                        ; yields i8:1
      %Y = trunc i32 123 to i1                        ; yields i1:true
      %Z = trunc i32 122 to i1                        ; yields i1:false
      %W = trunc <2 x i16> <i16 8, i16 7> to <2 x i8> ; yields <i8 8, i8 7>

'``zext .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = zext <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``zext``' instruction zero extends its operand to type ``ty2``.

Arguments:
""""""""""

The '``zext``' instruction takes a value to cast, and a type to cast it
to. Both types must be of :ref:`integer <t_integer>` types, or vectors of
the same number of integers. The bit size of the ``value`` must be
smaller than the bit size of the destination type, ``ty2``.

Semantics:
""""""""""

The ``zext`` fills the high order bits of the ``value`` with zero bits
until it reaches the size of the destination type, ``ty2``.

When zero extending from i1, the result will always be either 0 or 1.

Example:
""""""""

.. code-block:: llvm

      %X = zext i32 257 to i64              ; yields i64:257
      %Y = zext i1 true to i32              ; yields i32:1
      %Z = zext <2 x i16> <i16 8, i16 7> to <2 x i32> ; yields <i32 8, i32 7>

'``sext .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = sext <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``sext``' sign extends ``value`` to the type ``ty2``.

Arguments:
""""""""""

The '``sext``' instruction takes a value to cast, and a type to cast it
to. Both types must be of :ref:`integer <t_integer>` types, or vectors of
the same number of integers. The bit size of the ``value`` must be
smaller than the bit size of the destination type, ``ty2``.

Semantics:
""""""""""

The '``sext``' instruction performs a sign extension by copying the sign
bit (highest order bit) of the ``value`` until it reaches the bit size
of the type ``ty2``.

When sign extending from i1, the extension always results in -1 or 0.

Example:
""""""""

.. code-block:: llvm

      %X = sext i8  -1 to i16              ; yields i16   :65535
      %Y = sext i1 true to i32             ; yields i32:-1
      %Z = sext <2 x i16> <i16 8, i16 7> to <2 x i32> ; yields <i32 8, i32 7>

'``fptrunc .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fptrunc <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``fptrunc``' instruction truncates ``value`` to type ``ty2``.

Arguments:
""""""""""

The '``fptrunc``' instruction takes a :ref:`floating point <t_floating>`
value to cast and a :ref:`floating point <t_floating>` type to cast it to.
The size of ``value`` must be larger than the size of ``ty2``. This
implies that ``fptrunc`` cannot be used to make a *no-op cast*.

Semantics:
""""""""""

The '``fptrunc``' instruction truncates a ``value`` from a larger
:ref:`floating point <t_floating>` type to a smaller :ref:`floating
point <t_floating>` type. If the value cannot fit within the
destination type, ``ty2``, then the results are undefined.

Example:
""""""""

.. code-block:: llvm

      %X = fptrunc double 123.0 to float         ; yields float:123.0
      %Y = fptrunc double 1.0E+300 to float      ; yields undefined

'``fpext .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fpext <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``fpext``' extends a floating point ``value`` to a larger floating
point value.

Arguments:
""""""""""

The '``fpext``' instruction takes a :ref:`floating point <t_floating>`
``value`` to cast, and a :ref:`floating point <t_floating>` type to cast it
to. The source type must be smaller than the destination type.

Semantics:
""""""""""

The '``fpext``' instruction extends the ``value`` from a smaller
:ref:`floating point <t_floating>` type to a larger :ref:`floating
point <t_floating>` type. The ``fpext`` cannot be used to make a
*no-op cast* because it always changes bits. Use ``bitcast`` to make a
*no-op cast* for a floating point cast.

Example:
""""""""

.. code-block:: llvm

      %X = fpext float 3.125 to double         ; yields double:3.125000e+00
      %Y = fpext double %X to fp128            ; yields fp128:0xL00000000000000004000900000000000

'``fptoui .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fptoui <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``fptoui``' converts a floating point ``value`` to its unsigned
integer equivalent of type ``ty2``.

Arguments:
""""""""""

The '``fptoui``' instruction takes a value to cast, which must be a
scalar or vector :ref:`floating point <t_floating>` value, and a type to
cast it to ``ty2``, which must be an :ref:`integer <t_integer>` type. If
``ty`` is a vector floating point type, ``ty2`` must be a vector integer
type with the same number of elements as ``ty``

Semantics:
""""""""""

The '``fptoui``' instruction converts its :ref:`floating
point <t_floating>` operand into the nearest (rounding towards zero)
unsigned integer value. If the value cannot fit in ``ty2``, the results
are undefined.

Example:
""""""""

.. code-block:: llvm

      %X = fptoui double 123.0 to i32      ; yields i32:123
      %Y = fptoui float 1.0E+300 to i1     ; yields undefined:1
      %Z = fptoui float 1.04E+17 to i8     ; yields undefined:1

'``fptosi .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fptosi <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``fptosi``' instruction converts :ref:`floating point <t_floating>`
``value`` to type ``ty2``.

Arguments:
""""""""""

The '``fptosi``' instruction takes a value to cast, which must be a
scalar or vector :ref:`floating point <t_floating>` value, and a type to
cast it to ``ty2``, which must be an :ref:`integer <t_integer>` type. If
``ty`` is a vector floating point type, ``ty2`` must be a vector integer
type with the same number of elements as ``ty``

Semantics:
""""""""""

The '``fptosi``' instruction converts its :ref:`floating
point <t_floating>` operand into the nearest (rounding towards zero)
signed integer value. If the value cannot fit in ``ty2``, the results
are undefined.

Example:
""""""""

.. code-block:: llvm

      %X = fptosi double -123.0 to i32      ; yields i32:-123
      %Y = fptosi float 1.0E-247 to i1      ; yields undefined:1
      %Z = fptosi float 1.04E+17 to i8      ; yields undefined:1

'``uitofp .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = uitofp <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``uitofp``' instruction regards ``value`` as an unsigned integer
and converts that value to the ``ty2`` type.

Arguments:
""""""""""

The '``uitofp``' instruction takes a value to cast, which must be a
scalar or vector :ref:`integer <t_integer>` value, and a type to cast it to
``ty2``, which must be an :ref:`floating point <t_floating>` type. If
``ty`` is a vector integer type, ``ty2`` must be a vector floating point
type with the same number of elements as ``ty``

Semantics:
""""""""""

The '``uitofp``' instruction interprets its operand as an unsigned
integer quantity and converts it to the corresponding floating point
value. If the value cannot fit in the floating point value, the results
are undefined.

Example:
""""""""

.. code-block:: llvm

      %X = uitofp i32 257 to float         ; yields float:257.0
      %Y = uitofp i8 -1 to double          ; yields double:255.0

'``sitofp .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = sitofp <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``sitofp``' instruction regards ``value`` as a signed integer and
converts that value to the ``ty2`` type.

Arguments:
""""""""""

The '``sitofp``' instruction takes a value to cast, which must be a
scalar or vector :ref:`integer <t_integer>` value, and a type to cast it to
``ty2``, which must be an :ref:`floating point <t_floating>` type. If
``ty`` is a vector integer type, ``ty2`` must be a vector floating point
type with the same number of elements as ``ty``

Semantics:
""""""""""

The '``sitofp``' instruction interprets its operand as a signed integer
quantity and converts it to the corresponding floating point value. If
the value cannot fit in the floating point value, the results are
undefined.

Example:
""""""""

.. code-block:: llvm

      %X = sitofp i32 257 to float         ; yields float:257.0
      %Y = sitofp i8 -1 to double          ; yields double:-1.0

.. _i_ptrtoint:

'``ptrtoint .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = ptrtoint <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``ptrtoint``' instruction converts the pointer or a vector of
pointers ``value`` to the integer (or vector of integers) type ``ty2``.

Arguments:
""""""""""

The '``ptrtoint``' instruction takes a ``value`` to cast, which must be
a value of type :ref:`pointer <t_pointer>` or a vector of pointers, and a
type to cast it to ``ty2``, which must be an :ref:`integer <t_integer>` or
a vector of integers type.

Semantics:
""""""""""

The '``ptrtoint``' instruction converts ``value`` to integer type
``ty2`` by interpreting the pointer value as an integer and either
truncating or zero extending that value to the size of the integer type.
If ``value`` is smaller than ``ty2`` then a zero extension is done. If
``value`` is larger than ``ty2`` then a truncation is done. If they are
the same size, then nothing is done (*no-op cast*) other than a type
change.

Example:
""""""""

.. code-block:: llvm

      %X = ptrtoint i32* %P to i8                         ; yields truncation on 32-bit architecture
      %Y = ptrtoint i32* %P to i64                        ; yields zero extension on 32-bit architecture
      %Z = ptrtoint <4 x i32*> %P to <4 x i64>; yields vector zero extension for a vector of addresses on 32-bit architecture

.. _i_inttoptr:

'``inttoptr .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = inttoptr <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``inttoptr``' instruction converts an integer ``value`` to a
pointer type, ``ty2``.

Arguments:
""""""""""

The '``inttoptr``' instruction takes an :ref:`integer <t_integer>` value to
cast, and a type to cast it to, which must be a :ref:`pointer <t_pointer>`
type.

Semantics:
""""""""""

The '``inttoptr``' instruction converts ``value`` to type ``ty2`` by
applying either a zero extension or a truncation depending on the size
of the integer ``value``. If ``value`` is larger than the size of a
pointer then a truncation is done. If ``value`` is smaller than the size
of a pointer then a zero extension is done. If they are the same size,
nothing is done (*no-op cast*).

Example:
""""""""

.. code-block:: llvm

      %X = inttoptr i32 255 to i32*          ; yields zero extension on 64-bit architecture
      %Y = inttoptr i32 255 to i32*          ; yields no-op on 32-bit architecture
      %Z = inttoptr i64 0 to i32*            ; yields truncation on 32-bit architecture
      %Z = inttoptr <4 x i32> %G to <4 x i8*>; yields truncation of vector G to four pointers

.. _i_bitcast:

'``bitcast .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = bitcast <ty> <value> to <ty2>             ; yields ty2

Overview:
"""""""""

The '``bitcast``' instruction converts ``value`` to type ``ty2`` without
changing any bits.

Arguments:
""""""""""

The '``bitcast``' instruction takes a value to cast, which must be a
non-aggregate first class value, and a type to cast it to, which must
also be a non-aggregate :ref:`first class <t_firstclass>` type. The
bit sizes of ``value`` and the destination type, ``ty2``, must be
identical. If the source type is a pointer, the destination type must
also be a pointer of the same size. This instruction supports bitwise
conversion of vectors to integers and to vectors of other types (as
long as they have the same size).

Semantics:
""""""""""

The '``bitcast``' instruction converts ``value`` to type ``ty2``. It
is always a *no-op cast* because no bits change with this
conversion. The conversion is done as if the ``value`` had been stored
to memory and read back as type ``ty2``. Pointer (or vector of
pointers) types may only be converted to other pointer (or vector of
pointers) types with the same address space through this instruction.
To convert pointers to other types, use the :ref:`inttoptr <i_inttoptr>`
or :ref:`ptrtoint <i_ptrtoint>` instructions first.

Example:
""""""""

.. code-block:: llvm

      %X = bitcast i8 255 to i8              ; yields i8 :-1
      %Y = bitcast i32* %x to sint*          ; yields sint*:%x
      %Z = bitcast <2 x int> %V to i64;        ; yields i64: %V
      %Z = bitcast <2 x i32*> %V to <2 x i64*> ; yields <2 x i64*>

.. _i_addrspacecast:

'``addrspacecast .. to``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = addrspacecast <pty> <ptrval> to <pty2>       ; yields pty2

Overview:
"""""""""

The '``addrspacecast``' instruction converts ``ptrval`` from ``pty`` in
address space ``n`` to type ``pty2`` in address space ``m``.

Arguments:
""""""""""

The '``addrspacecast``' instruction takes a pointer or vector of pointer value
to cast and a pointer type to cast it to, which must have a different
address space.

Semantics:
""""""""""

The '``addrspacecast``' instruction converts the pointer value
``ptrval`` to type ``pty2``. It can be a *no-op cast* or a complex
value modification, depending on the target and the address space
pair. Pointer conversions within the same address space must be
performed with the ``bitcast`` instruction. Note that if the address space
conversion is legal then both result and operand refer to the same memory
location.

Example:
""""""""

.. code-block:: llvm

      %X = addrspacecast i32* %x to i32 addrspace(1)*    ; yields i32 addrspace(1)*:%x
      %Y = addrspacecast i32 addrspace(1)* %y to i64 addrspace(2)*    ; yields i64 addrspace(2)*:%y
      %Z = addrspacecast <4 x i32*> %z to <4 x float addrspace(3)*>   ; yields <4 x float addrspace(3)*>:%z

.. _otherops:

Other Operations
----------------

The instructions in this category are the "miscellaneous" instructions,
which defy better classification.

.. _i_icmp:

'``icmp``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = icmp <cond> <ty> <op1>, <op2>   ; yields i1 or <N x i1>:result

Overview:
"""""""""

The '``icmp``' instruction returns a boolean value or a vector of
boolean values based on comparison of its two integer, integer vector,
pointer, or pointer vector operands.

Arguments:
""""""""""

The '``icmp``' instruction takes three operands. The first operand is
the condition code indicating the kind of comparison to perform. It is
not a value, just a keyword. The possible condition code are:

#. ``eq``: equal
#. ``ne``: not equal
#. ``ugt``: unsigned greater than
#. ``uge``: unsigned greater or equal
#. ``ult``: unsigned less than
#. ``ule``: unsigned less or equal
#. ``sgt``: signed greater than
#. ``sge``: signed greater or equal
#. ``slt``: signed less than
#. ``sle``: signed less or equal

The remaining two arguments must be :ref:`integer <t_integer>` or
:ref:`pointer <t_pointer>` or integer :ref:`vector <t_vector>` typed. They
must also be identical types.

Semantics:
""""""""""

The '``icmp``' compares ``op1`` and ``op2`` according to the condition
code given as ``cond``. The comparison performed always yields either an
:ref:`i1 <t_integer>` or vector of ``i1`` result, as follows:

#. ``eq``: yields ``true`` if the operands are equal, ``false``
   otherwise. No sign interpretation is necessary or performed.
#. ``ne``: yields ``true`` if the operands are unequal, ``false``
   otherwise. No sign interpretation is necessary or performed.
#. ``ugt``: interprets the operands as unsigned values and yields
   ``true`` if ``op1`` is greater than ``op2``.
#. ``uge``: interprets the operands as unsigned values and yields
   ``true`` if ``op1`` is greater than or equal to ``op2``.
#. ``ult``: interprets the operands as unsigned values and yields
   ``true`` if ``op1`` is less than ``op2``.
#. ``ule``: interprets the operands as unsigned values and yields
   ``true`` if ``op1`` is less than or equal to ``op2``.
#. ``sgt``: interprets the operands as signed values and yields ``true``
   if ``op1`` is greater than ``op2``.
#. ``sge``: interprets the operands as signed values and yields ``true``
   if ``op1`` is greater than or equal to ``op2``.
#. ``slt``: interprets the operands as signed values and yields ``true``
   if ``op1`` is less than ``op2``.
#. ``sle``: interprets the operands as signed values and yields ``true``
   if ``op1`` is less than or equal to ``op2``.

If the operands are :ref:`pointer <t_pointer>` typed, the pointer values
are compared as if they were integers.

If the operands are integer vectors, then they are compared element by
element. The result is an ``i1`` vector with the same number of elements
as the values being compared. Otherwise, the result is an ``i1``.

Example:
""""""""

.. code-block:: llvm

      <result> = icmp eq i32 4, 5          ; yields: result=false
      <result> = icmp ne float* %X, %X     ; yields: result=false
      <result> = icmp ult i16  4, 5        ; yields: result=true
      <result> = icmp sgt i16  4, 5        ; yields: result=false
      <result> = icmp ule i16 -4, 5        ; yields: result=false
      <result> = icmp sge i16  4, 5        ; yields: result=false

Note that the code generator does not yet support vector types with the
``icmp`` instruction.

.. _i_fcmp:

'``fcmp``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = fcmp [fast-math flags]* <cond> <ty> <op1>, <op2>     ; yields i1 or <N x i1>:result

Overview:
"""""""""

The '``fcmp``' instruction returns a boolean value or vector of boolean
values based on comparison of its operands.

If the operands are floating point scalars, then the result type is a
boolean (:ref:`i1 <t_integer>`).

If the operands are floating point vectors, then the result type is a
vector of boolean with the same number of elements as the operands being
compared.

Arguments:
""""""""""

The '``fcmp``' instruction takes three operands. The first operand is
the condition code indicating the kind of comparison to perform. It is
not a value, just a keyword. The possible condition code are:

#. ``false``: no comparison, always returns false
#. ``oeq``: ordered and equal
#. ``ogt``: ordered and greater than
#. ``oge``: ordered and greater than or equal
#. ``olt``: ordered and less than
#. ``ole``: ordered and less than or equal
#. ``one``: ordered and not equal
#. ``ord``: ordered (no nans)
#. ``ueq``: unordered or equal
#. ``ugt``: unordered or greater than
#. ``uge``: unordered or greater than or equal
#. ``ult``: unordered or less than
#. ``ule``: unordered or less than or equal
#. ``une``: unordered or not equal
#. ``uno``: unordered (either nans)
#. ``true``: no comparison, always returns true

*Ordered* means that neither operand is a QNAN while *unordered* means
that either operand may be a QNAN.

Each of ``val1`` and ``val2`` arguments must be either a :ref:`floating
point <t_floating>` type or a :ref:`vector <t_vector>` of floating point
type. They must have identical types.

Semantics:
""""""""""

The '``fcmp``' instruction compares ``op1`` and ``op2`` according to the
condition code given as ``cond``. If the operands are vectors, then the
vectors are compared element by element. Each comparison performed
always yields an :ref:`i1 <t_integer>` result, as follows:

#. ``false``: always yields ``false``, regardless of operands.
#. ``oeq``: yields ``true`` if both operands are not a QNAN and ``op1``
   is equal to ``op2``.
#. ``ogt``: yields ``true`` if both operands are not a QNAN and ``op1``
   is greater than ``op2``.
#. ``oge``: yields ``true`` if both operands are not a QNAN and ``op1``
   is greater than or equal to ``op2``.
#. ``olt``: yields ``true`` if both operands are not a QNAN and ``op1``
   is less than ``op2``.
#. ``ole``: yields ``true`` if both operands are not a QNAN and ``op1``
   is less than or equal to ``op2``.
#. ``one``: yields ``true`` if both operands are not a QNAN and ``op1``
   is not equal to ``op2``.
#. ``ord``: yields ``true`` if both operands are not a QNAN.
#. ``ueq``: yields ``true`` if either operand is a QNAN or ``op1`` is
   equal to ``op2``.
#. ``ugt``: yields ``true`` if either operand is a QNAN or ``op1`` is
   greater than ``op2``.
#. ``uge``: yields ``true`` if either operand is a QNAN or ``op1`` is
   greater than or equal to ``op2``.
#. ``ult``: yields ``true`` if either operand is a QNAN or ``op1`` is
   less than ``op2``.
#. ``ule``: yields ``true`` if either operand is a QNAN or ``op1`` is
   less than or equal to ``op2``.
#. ``une``: yields ``true`` if either operand is a QNAN or ``op1`` is
   not equal to ``op2``.
#. ``uno``: yields ``true`` if either operand is a QNAN.
#. ``true``: always yields ``true``, regardless of operands.

The ``fcmp`` instruction can also optionally take any number of
:ref:`fast-math flags <fastmath>`, which are optimization hints to enable
otherwise unsafe floating point optimizations.

Any set of fast-math flags are legal on an ``fcmp`` instruction, but the
only flags that have any effect on its semantics are those that allow
assumptions to be made about the values of input arguments; namely
``nnan``, ``ninf``, and ``nsz``. See :ref:`fastmath` for more information.

Example:
""""""""

.. code-block:: llvm

      <result> = fcmp oeq float 4.0, 5.0    ; yields: result=false
      <result> = fcmp one float 4.0, 5.0    ; yields: result=true
      <result> = fcmp olt float 4.0, 5.0    ; yields: result=true
      <result> = fcmp ueq double 1.0, 2.0   ; yields: result=false

Note that the code generator does not yet support vector types with the
``fcmp`` instruction.

.. _i_phi:

'``phi``' Instruction
^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = phi <ty> [ <val0>, <label0>], ...

Overview:
"""""""""

The '``phi``' instruction is used to implement the φ node in the SSA
graph representing the function.

Arguments:
""""""""""

The type of the incoming values is specified with the first type field.
After this, the '``phi``' instruction takes a list of pairs as
arguments, with one pair for each predecessor basic block of the current
block. Only values of :ref:`first class <t_firstclass>` type may be used as
the value arguments to the PHI node. Only labels may be used as the
label arguments.

There must be no non-phi instructions between the start of a basic block
and the PHI instructions: i.e. PHI instructions must be first in a basic
block.

For the purposes of the SSA form, the use of each incoming value is
deemed to occur on the edge from the corresponding predecessor block to
the current block (but after any definition of an '``invoke``'
instruction's return value on the same edge).

Semantics:
""""""""""

At runtime, the '``phi``' instruction logically takes on the value
specified by the pair corresponding to the predecessor basic block that
executed just prior to the current block.

Example:
""""""""

.. code-block:: llvm

    Loop:       ; Infinite loop that counts from 0 on up...
      %indvar = phi i32 [ 0, %LoopHeader ], [ %nextindvar, %Loop ]
      %nextindvar = add i32 %indvar, 1
      br label %Loop

.. _i_select:

'``select``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = select selty <cond>, <ty> <val1>, <ty> <val2>             ; yields ty

      selty is either i1 or {<N x i1>}

Overview:
"""""""""

The '``select``' instruction is used to choose one value based on a
condition, without IR-level branching.

Arguments:
""""""""""

The '``select``' instruction requires an 'i1' value or a vector of 'i1'
values indicating the condition, and two values of the same :ref:`first
class <t_firstclass>` type.

Semantics:
""""""""""

If the condition is an i1 and it evaluates to 1, the instruction returns
the first value argument; otherwise, it returns the second value
argument.

If the condition is a vector of i1, then the value arguments must be
vectors of the same size, and the selection is done element by element.

If the condition is an i1 and the value arguments are vectors of the
same size, then an entire vector is selected.

Example:
""""""""

.. code-block:: llvm

      %X = select i1 true, i8 17, i8 42          ; yields i8:17

.. _i_call:

'``call``' Instruction
^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <result> = [tail | musttail] call [cconv] [ret attrs] <ty> [<fnty>*] <fnptrval>(<function args>) [fn attrs]

Overview:
"""""""""

The '``call``' instruction represents a simple function call.

Arguments:
""""""""""

This instruction requires several arguments:

#. The optional ``tail`` and ``musttail`` markers indicate that the optimizers
   should perform tail call optimization. The ``tail`` marker is a hint that
   `can be ignored <CodeGenerator.html#sibcallopt>`_. The ``musttail`` marker
   means that the call must be tail call optimized in order for the program to
   be correct. The ``musttail`` marker provides these guarantees:

   #. The call will not cause unbounded stack growth if it is part of a
      recursive cycle in the call graph.
   #. Arguments with the :ref:`inalloca <attr_inalloca>` attribute are
      forwarded in place.

   Both markers imply that the callee does not access allocas or varargs from
   the caller. Calls marked ``musttail`` must obey the following additional
   rules:

   - The call must immediately precede a :ref:`ret <i_ret>` instruction,
     or a pointer bitcast followed by a ret instruction.
   - The ret instruction must return the (possibly bitcasted) value
     produced by the call or void.
   - The caller and callee prototypes must match. Pointer types of
     parameters or return types may differ in pointee type, but not
     in address space.
   - The calling conventions of the caller and callee must match.
   - All ABI-impacting function attributes, such as sret, byval, inreg,
     returned, and inalloca, must match.
   - The callee must be varargs iff the caller is varargs. Bitcasting a
     non-varargs function to the appropriate varargs type is legal so
     long as the non-varargs prefixes obey the other rules.

   Tail call optimization for calls marked ``tail`` is guaranteed to occur if
   the following conditions are met:

   -  Caller and callee both have the calling convention ``fastcc``.
   -  The call is in tail position (ret immediately follows call and ret
      uses value of call or is void).
   -  Option ``-tailcallopt`` is enabled, or
      ``llvm::GuaranteedTailCallOpt`` is ``true``.
   -  `Platform-specific constraints are
      met. <CodeGenerator.html#tailcallopt>`_

#. The optional "cconv" marker indicates which :ref:`calling
   convention <callingconv>` the call should use. If none is
   specified, the call defaults to using C calling conventions. The
   calling convention of the call must match the calling convention of
   the target function, or else the behavior is undefined.
#. The optional :ref:`Parameter Attributes <paramattrs>` list for return
   values. Only '``zeroext``', '``signext``', and '``inreg``' attributes
   are valid here.
#. '``ty``': the type of the call instruction itself which is also the
   type of the return value. Functions that return no value are marked
   ``void``.
#. '``fnty``': shall be the signature of the pointer to function value
   being invoked. The argument types must match the types implied by
   this signature. This type can be omitted if the function is not
   varargs and if the function type does not return a pointer to a
   function.
#. '``fnptrval``': An LLVM value containing a pointer to a function to
   be invoked. In most cases, this is a direct function invocation, but
   indirect ``call``'s are just as possible, calling an arbitrary pointer
   to function value.
#. '``function args``': argument list whose types match the function
   signature argument types and parameter attributes. All arguments must
   be of :ref:`first class <t_firstclass>` type. If the function signature
   indicates the function accepts a variable number of arguments, the
   extra arguments can be specified.
#. The optional :ref:`function attributes <fnattrs>` list. Only
   '``noreturn``', '``nounwind``', '``readonly``' and '``readnone``'
   attributes are valid here.

Semantics:
""""""""""

The '``call``' instruction is used to cause control flow to transfer to
a specified function, with its incoming arguments bound to the specified
values. Upon a '``ret``' instruction in the called function, control
flow continues with the instruction after the function call, and the
return value of the function is bound to the result argument.

Example:
""""""""

.. code-block:: llvm

      %retval = call i32 @test(i32 %argc)
      call i32 (i8*, ...)* @printf(i8* %msg, i32 12, i8 42)        ; yields i32
      %X = tail call i32 @foo()                                    ; yields i32
      %Y = tail call fastcc i32 @foo()  ; yields i32
      call void %foo(i8 97 signext)

      %struct.A = type { i32, i8 }
      %r = call %struct.A @foo()                        ; yields { i32, i8 }
      %gr = extractvalue %struct.A %r, 0                ; yields i32
      %gr1 = extractvalue %struct.A %r, 1               ; yields i8
      %Z = call void @foo() noreturn                    ; indicates that %foo never returns normally
      %ZZ = call zeroext i32 @bar()                     ; Return value is %zero extended

llvm treats calls to some functions with names and arguments that match
the standard C99 library as being the C99 library functions, and may
perform optimizations or generate code for them under that assumption.
This is something we'd like to change in the future to provide better
support for freestanding environments and non-C-based languages.

.. _i_va_arg:

'``va_arg``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <resultval> = va_arg <va_list*> <arglist>, <argty>

Overview:
"""""""""

The '``va_arg``' instruction is used to access arguments passed through
the "variable argument" area of a function call. It is used to implement
the ``va_arg`` macro in C.

Arguments:
""""""""""

This instruction takes a ``va_list*`` value and the type of the
argument. It returns a value of the specified argument type and
increments the ``va_list`` to point to the next argument. The actual
type of ``va_list`` is target specific.

Semantics:
""""""""""

The '``va_arg``' instruction loads an argument of the specified type
from the specified ``va_list`` and causes the ``va_list`` to point to
the next argument. For more information, see the variable argument
handling :ref:`Intrinsic Functions <int_varargs>`.

It is legal for this instruction to be called in a function which does
not take a variable number of arguments, for example, the ``vfprintf``
function.

``va_arg`` is an LLVM instruction instead of an :ref:`intrinsic
function <intrinsics>` because it takes a type as an argument.

Example:
""""""""

See the :ref:`variable argument processing <int_varargs>` section.

Note that the code generator does not yet fully support va\_arg on many
targets. Also, it does not currently support va\_arg with aggregate
types on any target.

.. _i_landingpad:

'``landingpad``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <resultval> = landingpad <resultty> <clause>+
      <resultval> = landingpad <resultty> cleanup <clause>*

      <clause> := catch <type> <value>
      <clause> := filter <array constant type> <array constant>

Overview:
"""""""""

The '``landingpad``' instruction is used by `LLVM's exception handling
system <ExceptionHandling.html#overview>`_ to specify that a basic block
is a landing pad --- one where the exception lands, and corresponds to the
code found in the ``catch`` portion of a ``try``/``catch`` sequence. It
defines values supplied by the :ref:`personality function <personalityfn>` upon
re-entry to the function. The ``resultval`` has the type ``resultty``.

Arguments:
""""""""""

The optional
``cleanup`` flag indicates that the landing pad block is a cleanup.

A ``clause`` begins with the clause type --- ``catch`` or ``filter`` --- and
contains the global variable representing the "type" that may be caught
or filtered respectively. Unlike the ``catch`` clause, the ``filter``
clause takes an array constant as its argument. Use
"``[0 x i8**] undef``" for a filter which cannot throw. The
'``landingpad``' instruction must contain *at least* one ``clause`` or
the ``cleanup`` flag.

Semantics:
""""""""""

The '``landingpad``' instruction defines the values which are set by the
:ref:`personality function <personalityfn>` upon re-entry to the function, and
therefore the "result type" of the ``landingpad`` instruction. As with
calling conventions, how the personality function results are
represented in LLVM IR is target specific.

The clauses are applied in order from top to bottom. If two
``landingpad`` instructions are merged together through inlining, the
clauses from the calling function are appended to the list of clauses.
When the call stack is being unwound due to an exception being thrown,
the exception is compared against each ``clause`` in turn. If it doesn't
match any of the clauses, and the ``cleanup`` flag is not set, then
unwinding continues further up the call stack.

The ``landingpad`` instruction has several restrictions:

-  A landing pad block is a basic block which is the unwind destination
   of an '``invoke``' instruction.
-  A landing pad block must have a '``landingpad``' instruction as its
   first non-PHI instruction.
-  There can be only one '``landingpad``' instruction within the landing
   pad block.
-  A basic block that is not a landing pad block may not include a
   '``landingpad``' instruction.

Example:
""""""""

.. code-block:: llvm

      ;; A landing pad which can catch an integer.
      %res = landingpad { i8*, i32 }
               catch i8** @_ZTIi
      ;; A landing pad that is a cleanup.
      %res = landingpad { i8*, i32 }
               cleanup
      ;; A landing pad which can catch an integer and can only throw a double.
      %res = landingpad { i8*, i32 }
               catch i8** @_ZTIi
               filter [1 x i8**] [@_ZTId]

.. _i_cleanuppad:

'``cleanuppad``' Instruction
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      <resultval> = cleanuppad <resultty> [<args>*]

Overview:
"""""""""

The '``cleanuppad``' instruction is used by `LLVM's exception handling
system <ExceptionHandling.html#overview>`_ to specify that a basic block
is a cleanup block --- one where a personality routine attempts to
transfer control to run cleanup actions.
The ``args`` correspond to whatever additional
information the :ref:`personality function <personalityfn>` requires to
execute the cleanup.
The ``resultval`` has the type ``resultty``.

Arguments:
""""""""""

The instruction takes a list of arbitrary values which are interpreted
by the :ref:`personality function <personalityfn>`.

Semantics:
""""""""""

The '``cleanuppad``' instruction defines the values which are set by the
:ref:`personality function <personalityfn>` upon re-entry to the function, and
therefore the "result type" of the ``cleanuppad`` instruction. As with
calling conventions, how the personality function results are
represented in LLVM IR is target specific.

When the call stack is being unwound due to an exception being thrown,
the :ref:`personality function <personalityfn>` transfers control to the
``cleanuppad`` with the aid of the personality-specific arguments.

The ``cleanuppad`` instruction has several restrictions:

-  A cleanup block is a basic block which is the unwind destination of
   an exceptional instruction.
-  A cleanup block must have a '``cleanuppad``' instruction as its
   first non-PHI instruction.
-  There can be only one '``cleanuppad``' instruction within the
   cleanup block.
-  A basic block that is not a cleanup block may not include a
   '``cleanuppad``' instruction.
-  It is undefined behavior for control to transfer from a ``cleanuppad`` to a
   ``catchret`` without first executing a ``cleanupret`` and a subsequent
   ``catchpad``.
-  It is undefined behavior for control to transfer from a ``cleanuppad`` to a
   ``ret`` without first executing a ``cleanupret``.

Example:
""""""""

.. code-block:: llvm

      %res = cleanuppad { i8*, i32 } [label %nextaction]

.. _intrinsics:

Intrinsic Functions
===================

LLVM supports the notion of an "intrinsic function". These functions
have well known names and semantics and are required to follow certain
restrictions. Overall, these intrinsics represent an extension mechanism
for the LLVM language that does not require changing all of the
transformations in LLVM when adding to the language (or the bitcode
reader/writer, the parser, etc...).

Intrinsic function names must all start with an "``llvm.``" prefix. This
prefix is reserved in LLVM for intrinsic names; thus, function names may
not begin with this prefix. Intrinsic functions must always be external
functions: you cannot define the body of intrinsic functions. Intrinsic
functions may only be used in call or invoke instructions: it is illegal
to take the address of an intrinsic function. Additionally, because
intrinsic functions are part of the LLVM language, it is required if any
are added that they be documented here.

Some intrinsic functions can be overloaded, i.e., the intrinsic
represents a family of functions that perform the same operation but on
different data types. Because LLVM can represent over 8 million
different integer types, overloading is used commonly to allow an
intrinsic function to operate on any integer type. One or more of the
argument types or the result type can be overloaded to accept any
integer type. Argument types may also be defined as exactly matching a
previous argument's type or the result type. This allows an intrinsic
function which accepts multiple arguments, but needs all of them to be
of the same type, to only be overloaded with respect to a single
argument or the result.

Overloaded intrinsics will have the names of its overloaded argument
types encoded into its function name, each preceded by a period. Only
those types which are overloaded result in a name suffix. Arguments
whose type is matched against another type do not. For example, the
``llvm.ctpop`` function can take an integer of any width and returns an
integer of exactly the same integer width. This leads to a family of
functions such as ``i8 @llvm.ctpop.i8(i8 %val)`` and
``i29 @llvm.ctpop.i29(i29 %val)``. Only one type, the return type, is
overloaded, and only one type suffix is required. Because the argument's
type is matched against the return type, it does not require its own
name suffix.

To learn how to add an intrinsic function, please see the `Extending
LLVM Guide <ExtendingLLVM.html>`_.

.. _int_varargs:

Variable Argument Handling Intrinsics
-------------------------------------

Variable argument support is defined in LLVM with the
:ref:`va_arg <i_va_arg>` instruction and these three intrinsic
functions. These functions are related to the similarly named macros
defined in the ``<stdarg.h>`` header file.

All of these functions operate on arguments that use a target-specific
value type "``va_list``". The LLVM assembly language reference manual
does not define what this type is, so all transformations should be
prepared to handle these functions regardless of the type used.

This example shows how the :ref:`va_arg <i_va_arg>` instruction and the
variable argument handling intrinsic functions are used.

.. code-block:: llvm

    ; This struct is different for every platform. For most platforms,
    ; it is merely an i8*.
    %struct.va_list = type { i8* }

    ; For Unix x86_64 platforms, va_list is the following struct:
    ; %struct.va_list = type { i32, i32, i8*, i8* }

    define i32 @test(i32 %X, ...) {
      ; Initialize variable argument processing
      %ap = alloca %struct.va_list
      %ap2 = bitcast %struct.va_list* %ap to i8*
      call void @llvm.va_start(i8* %ap2)

      ; Read a single integer argument
      %tmp = va_arg i8* %ap2, i32

      ; Demonstrate usage of llvm.va_copy and llvm.va_end
      %aq = alloca i8*
      %aq2 = bitcast i8** %aq to i8*
      call void @llvm.va_copy(i8* %aq2, i8* %ap2)
      call void @llvm.va_end(i8* %aq2)

      ; Stop processing of arguments.
      call void @llvm.va_end(i8* %ap2)
      ret i32 %tmp
    }

    declare void @llvm.va_start(i8*)
    declare void @llvm.va_copy(i8*, i8*)
    declare void @llvm.va_end(i8*)

.. _int_va_start:

'``llvm.va_start``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.va_start(i8* <arglist>)

Overview:
"""""""""

The '``llvm.va_start``' intrinsic initializes ``*<arglist>`` for
subsequent use by ``va_arg``.

Arguments:
""""""""""

The argument is a pointer to a ``va_list`` element to initialize.

Semantics:
""""""""""

The '``llvm.va_start``' intrinsic works just like the ``va_start`` macro
available in C. In a target-dependent way, it initializes the
``va_list`` element to which the argument points, so that the next call
to ``va_arg`` will produce the first variable argument passed to the
function. Unlike the C ``va_start`` macro, this intrinsic does not need
to know the last argument of the function as the compiler can figure
that out.

'``llvm.va_end``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.va_end(i8* <arglist>)

Overview:
"""""""""

The '``llvm.va_end``' intrinsic destroys ``*<arglist>``, which has been
initialized previously with ``llvm.va_start`` or ``llvm.va_copy``.

Arguments:
""""""""""

The argument is a pointer to a ``va_list`` to destroy.

Semantics:
""""""""""

The '``llvm.va_end``' intrinsic works just like the ``va_end`` macro
available in C. In a target-dependent way, it destroys the ``va_list``
element to which the argument points. Calls to
:ref:`llvm.va_start <int_va_start>` and
:ref:`llvm.va_copy <int_va_copy>` must be matched exactly with calls to
``llvm.va_end``.

.. _int_va_copy:

'``llvm.va_copy``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.va_copy(i8* <destarglist>, i8* <srcarglist>)

Overview:
"""""""""

The '``llvm.va_copy``' intrinsic copies the current argument position
from the source argument list to the destination argument list.

Arguments:
""""""""""

The first argument is a pointer to a ``va_list`` element to initialize.
The second argument is a pointer to a ``va_list`` element to copy from.

Semantics:
""""""""""

The '``llvm.va_copy``' intrinsic works just like the ``va_copy`` macro
available in C. In a target-dependent way, it copies the source
``va_list`` element into the destination ``va_list`` element. This
intrinsic is necessary because the `` llvm.va_start`` intrinsic may be
arbitrarily complex and require, for example, memory allocation.

Accurate Garbage Collection Intrinsics
--------------------------------------

LLVM's support for `Accurate Garbage Collection <GarbageCollection.html>`_
(GC) requires the frontend to generate code containing appropriate intrinsic
calls and select an appropriate GC strategy which knows how to lower these
intrinsics in a manner which is appropriate for the target collector.

These intrinsics allow identification of :ref:`GC roots on the
stack <int_gcroot>`, as well as garbage collector implementations that
require :ref:`read <int_gcread>` and :ref:`write <int_gcwrite>` barriers.
Frontends for type-safe garbage collected languages should generate
these intrinsics to make use of the LLVM garbage collectors. For more
details, see `Garbage Collection with LLVM <GarbageCollection.html>`_.

Experimental Statepoint Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

LLVM provides an second experimental set of intrinsics for describing garbage
collection safepoints in compiled code. These intrinsics are an alternative
to the ``llvm.gcroot`` intrinsics, but are compatible with the ones for
:ref:`read <int_gcread>` and :ref:`write <int_gcwrite>` barriers. The
differences in approach are covered in the `Garbage Collection with LLVM
<GarbageCollection.html>`_ documentation. The intrinsics themselves are
described in :doc:`Statepoints`.

.. _int_gcroot:

'``llvm.gcroot``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.gcroot(i8** %ptrloc, i8* %metadata)

Overview:
"""""""""

The '``llvm.gcroot``' intrinsic declares the existence of a GC root to
the code generator, and allows some metadata to be associated with it.

Arguments:
""""""""""

The first argument specifies the address of a stack object that contains
the root pointer. The second pointer (which must be either a constant or
a global value address) contains the meta-data to be associated with the
root.

Semantics:
""""""""""

At runtime, a call to this intrinsic stores a null pointer into the
"ptrloc" location. At compile-time, the code generator generates
information to allow the runtime to find the pointer at GC safe points.
The '``llvm.gcroot``' intrinsic may only be used in a function which
:ref:`specifies a GC algorithm <gc>`.

.. _int_gcread:

'``llvm.gcread``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i8* @llvm.gcread(i8* %ObjPtr, i8** %Ptr)

Overview:
"""""""""

The '``llvm.gcread``' intrinsic identifies reads of references from heap
locations, allowing garbage collector implementations that require read
barriers.

Arguments:
""""""""""

The second argument is the address to read from, which should be an
address allocated from the garbage collector. The first object is a
pointer to the start of the referenced object, if needed by the language
runtime (otherwise null).

Semantics:
""""""""""

The '``llvm.gcread``' intrinsic has the same semantics as a load
instruction, but may be replaced with substantially more complex code by
the garbage collector runtime, as needed. The '``llvm.gcread``'
intrinsic may only be used in a function which :ref:`specifies a GC
algorithm <gc>`.

.. _int_gcwrite:

'``llvm.gcwrite``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.gcwrite(i8* %P1, i8* %Obj, i8** %P2)

Overview:
"""""""""

The '``llvm.gcwrite``' intrinsic identifies writes of references to heap
locations, allowing garbage collector implementations that require write
barriers (such as generational or reference counting collectors).

Arguments:
""""""""""

The first argument is the reference to store, the second is the start of
the object to store it to, and the third is the address of the field of
Obj to store to. If the runtime does not require a pointer to the
object, Obj may be null.

Semantics:
""""""""""

The '``llvm.gcwrite``' intrinsic has the same semantics as a store
instruction, but may be replaced with substantially more complex code by
the garbage collector runtime, as needed. The '``llvm.gcwrite``'
intrinsic may only be used in a function which :ref:`specifies a GC
algorithm <gc>`.

Code Generator Intrinsics
-------------------------

These intrinsics are provided by LLVM to expose special features that
may only be implemented with code generator support.

'``llvm.returnaddress``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i8  *@llvm.returnaddress(i32 <level>)

Overview:
"""""""""

The '``llvm.returnaddress``' intrinsic attempts to compute a
target-specific value indicating the return address of the current
function or one of its callers.

Arguments:
""""""""""

The argument to this intrinsic indicates which function to return the
address for. Zero indicates the calling function, one indicates its
caller, etc. The argument is **required** to be a constant integer
value.

Semantics:
""""""""""

The '``llvm.returnaddress``' intrinsic either returns a pointer
indicating the return address of the specified call frame, or zero if it
cannot be identified. The value returned by this intrinsic is likely to
be incorrect or 0 for arguments other than zero, so it should only be
used for debugging purposes.

Note that calling this intrinsic does not prevent function inlining or
other aggressive transformations, so the value returned may not be that
of the obvious source-language caller.

'``llvm.frameaddress``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i8* @llvm.frameaddress(i32 <level>)

Overview:
"""""""""

The '``llvm.frameaddress``' intrinsic attempts to return the
target-specific frame pointer value for the specified stack frame.

Arguments:
""""""""""

The argument to this intrinsic indicates which function to return the
frame pointer for. Zero indicates the calling function, one indicates
its caller, etc. The argument is **required** to be a constant integer
value.

Semantics:
""""""""""

The '``llvm.frameaddress``' intrinsic either returns a pointer
indicating the frame address of the specified call frame, or zero if it
cannot be identified. The value returned by this intrinsic is likely to
be incorrect or 0 for arguments other than zero, so it should only be
used for debugging purposes.

Note that calling this intrinsic does not prevent function inlining or
other aggressive transformations, so the value returned may not be that
of the obvious source-language caller.

'``llvm.localescape``' and '``llvm.localrecover``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.localescape(...)
      declare i8* @llvm.localrecover(i8* %func, i8* %fp, i32 %idx)

Overview:
"""""""""

The '``llvm.localescape``' intrinsic escapes offsets of a collection of static
allocas, and the '``llvm.localrecover``' intrinsic applies those offsets to a
live frame pointer to recover the address of the allocation. The offset is
computed during frame layout of the caller of ``llvm.localescape``.

Arguments:
""""""""""

All arguments to '``llvm.localescape``' must be pointers to static allocas or
casts of static allocas. Each function can only call '``llvm.localescape``'
once, and it can only do so from the entry block.

The ``func`` argument to '``llvm.localrecover``' must be a constant
bitcasted pointer to a function defined in the current module. The code
generator cannot determine the frame allocation offset of functions defined in
other modules.

The ``fp`` argument to '``llvm.localrecover``' must be a frame pointer of a
call frame that is currently live. The return value of '``llvm.localaddress``'
is one way to produce such a value, but various runtimes also expose a suitable
pointer in platform-specific ways.

The ``idx`` argument to '``llvm.localrecover``' indicates which alloca passed to
'``llvm.localescape``' to recover. It is zero-indexed.

Semantics:
""""""""""

These intrinsics allow a group of functions to share access to a set of local
stack allocations of a one parent function. The parent function may call the
'``llvm.localescape``' intrinsic once from the function entry block, and the
child functions can use '``llvm.localrecover``' to access the escaped allocas.
The '``llvm.localescape``' intrinsic blocks inlining, as inlining changes where
the escaped allocas are allocated, which would break attempts to use
'``llvm.localrecover``'.

.. _int_read_register:
.. _int_write_register:

'``llvm.read_register``' and '``llvm.write_register``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i32 @llvm.read_register.i32(metadata)
      declare i64 @llvm.read_register.i64(metadata)
      declare void @llvm.write_register.i32(metadata, i32 @value)
      declare void @llvm.write_register.i64(metadata, i64 @value)
      !0 = !{!"sp\00"}

Overview:
"""""""""

The '``llvm.read_register``' and '``llvm.write_register``' intrinsics
provides access to the named register. The register must be valid on
the architecture being compiled to. The type needs to be compatible
with the register being read.

Semantics:
""""""""""

The '``llvm.read_register``' intrinsic returns the current value of the
register, where possible. The '``llvm.write_register``' intrinsic sets
the current value of the register, where possible.

This is useful to implement named register global variables that need
to always be mapped to a specific register, as is common practice on
bare-metal programs including OS kernels.

The compiler doesn't check for register availability or use of the used
register in surrounding code, including inline assembly. Because of that,
allocatable registers are not supported.

Warning: So far it only works with the stack pointer on selected
architectures (ARM, AArch64, PowerPC and x86_64). Significant amount of
work is needed to support other registers and even more so, allocatable
registers.

.. _int_stacksave:

'``llvm.stacksave``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i8* @llvm.stacksave()

Overview:
"""""""""

The '``llvm.stacksave``' intrinsic is used to remember the current state
of the function stack, for use with
:ref:`llvm.stackrestore <int_stackrestore>`. This is useful for
implementing language features like scoped automatic variable sized
arrays in C99.

Semantics:
""""""""""

This intrinsic returns a opaque pointer value that can be passed to
:ref:`llvm.stackrestore <int_stackrestore>`. When an
``llvm.stackrestore`` intrinsic is executed with a value saved from
``llvm.stacksave``, it effectively restores the state of the stack to
the state it was in when the ``llvm.stacksave`` intrinsic executed. In
practice, this pops any :ref:`alloca <i_alloca>` blocks from the stack that
were allocated after the ``llvm.stacksave`` was executed.

.. _int_stackrestore:

'``llvm.stackrestore``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.stackrestore(i8* %ptr)

Overview:
"""""""""

The '``llvm.stackrestore``' intrinsic is used to restore the state of
the function stack to the state it was in when the corresponding
:ref:`llvm.stacksave <int_stacksave>` intrinsic executed. This is
useful for implementing language features like scoped automatic variable
sized arrays in C99.

Semantics:
""""""""""

See the description for :ref:`llvm.stacksave <int_stacksave>`.

'``llvm.prefetch``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.prefetch(i8* <address>, i32 <rw>, i32 <locality>, i32 <cache type>)

Overview:
"""""""""

The '``llvm.prefetch``' intrinsic is a hint to the code generator to
insert a prefetch instruction if supported; otherwise, it is a noop.
Prefetches have no effect on the behavior of the program but can change
its performance characteristics.

Arguments:
""""""""""

``address`` is the address to be prefetched, ``rw`` is the specifier
determining if the fetch should be for a read (0) or write (1), and
``locality`` is a temporal locality specifier ranging from (0) - no
locality, to (3) - extremely local keep in cache. The ``cache type``
specifies whether the prefetch is performed on the data (1) or
instruction (0) cache. The ``rw``, ``locality`` and ``cache type``
arguments must be constant integers.

Semantics:
""""""""""

This intrinsic does not modify the behavior of the program. In
particular, prefetches cannot trap and do not produce a value. On
targets that support this intrinsic, the prefetch can provide hints to
the processor cache for better performance.

'``llvm.pcmarker``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.pcmarker(i32 <id>)

Overview:
"""""""""

The '``llvm.pcmarker``' intrinsic is a method to export a Program
Counter (PC) in a region of code to simulators and other tools. The
method is target specific, but it is expected that the marker will use
exported symbols to transmit the PC of the marker. The marker makes no
guarantees that it will remain with any specific instruction after
optimizations. It is possible that the presence of a marker will inhibit
optimizations. The intended use is to be inserted after optimizations to
allow correlations of simulation runs.

Arguments:
""""""""""

``id`` is a numerical id identifying the marker.

Semantics:
""""""""""

This intrinsic does not modify the behavior of the program. Backends
that do not support this intrinsic may ignore it.

'``llvm.readcyclecounter``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i64 @llvm.readcyclecounter()

Overview:
"""""""""

The '``llvm.readcyclecounter``' intrinsic provides access to the cycle
counter register (or similar low latency, high accuracy clocks) on those
targets that support it. On X86, it should map to RDTSC. On Alpha, it
should map to RPCC. As the backing counters overflow quickly (on the
order of 9 seconds on alpha), this should only be used for small
timings.

Semantics:
""""""""""

When directly supported, reading the cycle counter should not modify any
memory. Implementations are allowed to either return a application
specific value or a system wide value. On backends without support, this
is lowered to a constant 0.

Note that runtime support may be conditional on the privilege-level code is
running at and the host platform.

'``llvm.clear_cache``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.clear_cache(i8*, i8*)

Overview:
"""""""""

The '``llvm.clear_cache``' intrinsic ensures visibility of modifications
in the specified range to the execution unit of the processor. On
targets with non-unified instruction and data cache, the implementation
flushes the instruction cache.

Semantics:
""""""""""

On platforms with coherent instruction and data caches (e.g. x86), this
intrinsic is a nop. On platforms with non-coherent instruction and data
cache (e.g. ARM, MIPS), the intrinsic is lowered either to appropriate
instructions or a system call, if cache flushing requires special
privileges.

The default behavior is to emit a call to ``__clear_cache`` from the run
time library.

This instrinsic does *not* empty the instruction pipeline. Modifications
of the current function are outside the scope of the intrinsic.

'``llvm.instrprof_increment``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.instrprof_increment(i8* <name>, i64 <hash>,
                                             i32 <num-counters>, i32 <index>)

Overview:
"""""""""

The '``llvm.instrprof_increment``' intrinsic can be emitted by a
frontend for use with instrumentation based profiling. These will be
lowered by the ``-instrprof`` pass to generate execution counts of a
program at runtime.

Arguments:
""""""""""

The first argument is a pointer to a global variable containing the
name of the entity being instrumented. This should generally be the
(mangled) function name for a set of counters.

The second argument is a hash value that can be used by the consumer
of the profile data to detect changes to the instrumented source, and
the third is the number of counters associated with ``name``. It is an
error if ``hash`` or ``num-counters`` differ between two instances of
``instrprof_increment`` that refer to the same name.

The last argument refers to which of the counters for ``name`` should
be incremented. It should be a value between 0 and ``num-counters``.

Semantics:
""""""""""

This intrinsic represents an increment of a profiling counter. It will
cause the ``-instrprof`` pass to generate the appropriate data
structures and the code to increment the appropriate value, in a
format that can be written out by a compiler runtime and consumed via
the ``llvm-profdata`` tool.

Standard C Library Intrinsics
-----------------------------

LLVM provides intrinsics for a few important standard C library
functions. These intrinsics allow source-language front-ends to pass
information about the alignment of the pointer arguments to the code
generator, providing opportunity for more efficient code generation.

.. _int_memcpy:

'``llvm.memcpy``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.memcpy`` on any
integer bit width and for different address spaces. Not all targets
support all bit widths however.

::

      declare void @llvm.memcpy.p0i8.p0i8.i32(i8* <dest>, i8* <src>,
                                              i32 <len>, i32 <align>, i1 <isvolatile>)
      declare void @llvm.memcpy.p0i8.p0i8.i64(i8* <dest>, i8* <src>,
                                              i64 <len>, i32 <align>, i1 <isvolatile>)

Overview:
"""""""""

The '``llvm.memcpy.*``' intrinsics copy a block of memory from the
source location to the destination location.

Note that, unlike the standard libc function, the ``llvm.memcpy.*``
intrinsics do not return a value, takes extra alignment/isvolatile
arguments and the pointers can be in specified address spaces.

Arguments:
""""""""""

The first argument is a pointer to the destination, the second is a
pointer to the source. The third argument is an integer argument
specifying the number of bytes to copy, the fourth argument is the
alignment of the source and destination locations, and the fifth is a
boolean indicating a volatile access.

If the call to this intrinsic has an alignment value that is not 0 or 1,
then the caller guarantees that both the source and destination pointers
are aligned to that boundary.

If the ``isvolatile`` parameter is ``true``, the ``llvm.memcpy`` call is
a :ref:`volatile operation <volatile>`. The detailed access behavior is not
very cleanly specified and it is unwise to depend on it.

Semantics:
""""""""""

The '``llvm.memcpy.*``' intrinsics copy a block of memory from the
source location to the destination location, which are not allowed to
overlap. It copies "len" bytes of memory over. If the argument is known
to be aligned to some boundary, this can be specified as the fourth
argument, otherwise it should be set to 0 or 1 (both meaning no alignment).

'``llvm.memmove``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use llvm.memmove on any integer
bit width and for different address space. Not all targets support all
bit widths however.

::

      declare void @llvm.memmove.p0i8.p0i8.i32(i8* <dest>, i8* <src>,
                                               i32 <len>, i32 <align>, i1 <isvolatile>)
      declare void @llvm.memmove.p0i8.p0i8.i64(i8* <dest>, i8* <src>,
                                               i64 <len>, i32 <align>, i1 <isvolatile>)

Overview:
"""""""""

The '``llvm.memmove.*``' intrinsics move a block of memory from the
source location to the destination location. It is similar to the
'``llvm.memcpy``' intrinsic but allows the two memory locations to
overlap.

Note that, unlike the standard libc function, the ``llvm.memmove.*``
intrinsics do not return a value, takes extra alignment/isvolatile
arguments and the pointers can be in specified address spaces.

Arguments:
""""""""""

The first argument is a pointer to the destination, the second is a
pointer to the source. The third argument is an integer argument
specifying the number of bytes to copy, the fourth argument is the
alignment of the source and destination locations, and the fifth is a
boolean indicating a volatile access.

If the call to this intrinsic has an alignment value that is not 0 or 1,
then the caller guarantees that the source and destination pointers are
aligned to that boundary.

If the ``isvolatile`` parameter is ``true``, the ``llvm.memmove`` call
is a :ref:`volatile operation <volatile>`. The detailed access behavior is
not very cleanly specified and it is unwise to depend on it.

Semantics:
""""""""""

The '``llvm.memmove.*``' intrinsics copy a block of memory from the
source location to the destination location, which may overlap. It
copies "len" bytes of memory over. If the argument is known to be
aligned to some boundary, this can be specified as the fourth argument,
otherwise it should be set to 0 or 1 (both meaning no alignment).

'``llvm.memset.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use llvm.memset on any integer
bit width and for different address spaces. However, not all targets
support all bit widths.

::

      declare void @llvm.memset.p0i8.i32(i8* <dest>, i8 <val>,
                                         i32 <len>, i32 <align>, i1 <isvolatile>)
      declare void @llvm.memset.p0i8.i64(i8* <dest>, i8 <val>,
                                         i64 <len>, i32 <align>, i1 <isvolatile>)

Overview:
"""""""""

The '``llvm.memset.*``' intrinsics fill a block of memory with a
particular byte value.

Note that, unlike the standard libc function, the ``llvm.memset``
intrinsic does not return a value and takes extra alignment/volatile
arguments. Also, the destination can be in an arbitrary address space.

Arguments:
""""""""""

The first argument is a pointer to the destination to fill, the second
is the byte value with which to fill it, the third argument is an
integer argument specifying the number of bytes to fill, and the fourth
argument is the known alignment of the destination location.

If the call to this intrinsic has an alignment value that is not 0 or 1,
then the caller guarantees that the destination pointer is aligned to
that boundary.

If the ``isvolatile`` parameter is ``true``, the ``llvm.memset`` call is
a :ref:`volatile operation <volatile>`. The detailed access behavior is not
very cleanly specified and it is unwise to depend on it.

Semantics:
""""""""""

The '``llvm.memset.*``' intrinsics fill "len" bytes of memory starting
at the destination location. If the argument is known to be aligned to
some boundary, this can be specified as the fourth argument, otherwise
it should be set to 0 or 1 (both meaning no alignment).

'``llvm.sqrt.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.sqrt`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.sqrt.f32(float %Val)
      declare double    @llvm.sqrt.f64(double %Val)
      declare x86_fp80  @llvm.sqrt.f80(x86_fp80 %Val)
      declare fp128     @llvm.sqrt.f128(fp128 %Val)
      declare ppc_fp128 @llvm.sqrt.ppcf128(ppc_fp128 %Val)

Overview:
"""""""""

The '``llvm.sqrt``' intrinsics return the sqrt of the specified operand,
returning the same value as the libm '``sqrt``' functions would. Unlike
``sqrt`` in libm, however, ``llvm.sqrt`` has undefined behavior for
negative numbers other than -0.0 (which allows for better optimization,
because there is no need to worry about errno being set).
``llvm.sqrt(-0.0)`` is defined to return -0.0 like IEEE sqrt.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the sqrt of the specified operand if it is a
nonnegative floating point number.

'``llvm.powi.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.powi`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.powi.f32(float  %Val, i32 %power)
      declare double    @llvm.powi.f64(double %Val, i32 %power)
      declare x86_fp80  @llvm.powi.f80(x86_fp80  %Val, i32 %power)
      declare fp128     @llvm.powi.f128(fp128 %Val, i32 %power)
      declare ppc_fp128 @llvm.powi.ppcf128(ppc_fp128  %Val, i32 %power)

Overview:
"""""""""

The '``llvm.powi.*``' intrinsics return the first operand raised to the
specified (positive or negative) power. The order of evaluation of
multiplications is not defined. When a vector of floating point type is
used, the second argument remains a scalar integer value.

Arguments:
""""""""""

The second argument is an integer power, and the first is a value to
raise to that power.

Semantics:
""""""""""

This function returns the first value raised to the second power with an
unspecified sequence of rounding operations.

'``llvm.sin.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.sin`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.sin.f32(float  %Val)
      declare double    @llvm.sin.f64(double %Val)
      declare x86_fp80  @llvm.sin.f80(x86_fp80  %Val)
      declare fp128     @llvm.sin.f128(fp128 %Val)
      declare ppc_fp128 @llvm.sin.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.sin.*``' intrinsics return the sine of the operand.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the sine of the specified operand, returning the
same values as the libm ``sin`` functions would, and handles error
conditions in the same way.

'``llvm.cos.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.cos`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.cos.f32(float  %Val)
      declare double    @llvm.cos.f64(double %Val)
      declare x86_fp80  @llvm.cos.f80(x86_fp80  %Val)
      declare fp128     @llvm.cos.f128(fp128 %Val)
      declare ppc_fp128 @llvm.cos.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.cos.*``' intrinsics return the cosine of the operand.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the cosine of the specified operand, returning the
same values as the libm ``cos`` functions would, and handles error
conditions in the same way.

'``llvm.pow.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.pow`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.pow.f32(float  %Val, float %Power)
      declare double    @llvm.pow.f64(double %Val, double %Power)
      declare x86_fp80  @llvm.pow.f80(x86_fp80  %Val, x86_fp80 %Power)
      declare fp128     @llvm.pow.f128(fp128 %Val, fp128 %Power)
      declare ppc_fp128 @llvm.pow.ppcf128(ppc_fp128  %Val, ppc_fp128 Power)

Overview:
"""""""""

The '``llvm.pow.*``' intrinsics return the first operand raised to the
specified (positive or negative) power.

Arguments:
""""""""""

The second argument is a floating point power, and the first is a value
to raise to that power.

Semantics:
""""""""""

This function returns the first value raised to the second power,
returning the same values as the libm ``pow`` functions would, and
handles error conditions in the same way.

'``llvm.exp.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.exp`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.exp.f32(float  %Val)
      declare double    @llvm.exp.f64(double %Val)
      declare x86_fp80  @llvm.exp.f80(x86_fp80  %Val)
      declare fp128     @llvm.exp.f128(fp128 %Val)
      declare ppc_fp128 @llvm.exp.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.exp.*``' intrinsics perform the exp function.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``exp`` functions
would, and handles error conditions in the same way.

'``llvm.exp2.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.exp2`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.exp2.f32(float  %Val)
      declare double    @llvm.exp2.f64(double %Val)
      declare x86_fp80  @llvm.exp2.f80(x86_fp80  %Val)
      declare fp128     @llvm.exp2.f128(fp128 %Val)
      declare ppc_fp128 @llvm.exp2.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.exp2.*``' intrinsics perform the exp2 function.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``exp2`` functions
would, and handles error conditions in the same way.

'``llvm.log.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.log`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.log.f32(float  %Val)
      declare double    @llvm.log.f64(double %Val)
      declare x86_fp80  @llvm.log.f80(x86_fp80  %Val)
      declare fp128     @llvm.log.f128(fp128 %Val)
      declare ppc_fp128 @llvm.log.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.log.*``' intrinsics perform the log function.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``log`` functions
would, and handles error conditions in the same way.

'``llvm.log10.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.log10`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.log10.f32(float  %Val)
      declare double    @llvm.log10.f64(double %Val)
      declare x86_fp80  @llvm.log10.f80(x86_fp80  %Val)
      declare fp128     @llvm.log10.f128(fp128 %Val)
      declare ppc_fp128 @llvm.log10.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.log10.*``' intrinsics perform the log10 function.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``log10`` functions
would, and handles error conditions in the same way.

'``llvm.log2.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.log2`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.log2.f32(float  %Val)
      declare double    @llvm.log2.f64(double %Val)
      declare x86_fp80  @llvm.log2.f80(x86_fp80  %Val)
      declare fp128     @llvm.log2.f128(fp128 %Val)
      declare ppc_fp128 @llvm.log2.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.log2.*``' intrinsics perform the log2 function.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``log2`` functions
would, and handles error conditions in the same way.

'``llvm.fma.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.fma`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.fma.f32(float  %a, float  %b, float  %c)
      declare double    @llvm.fma.f64(double %a, double %b, double %c)
      declare x86_fp80  @llvm.fma.f80(x86_fp80 %a, x86_fp80 %b, x86_fp80 %c)
      declare fp128     @llvm.fma.f128(fp128 %a, fp128 %b, fp128 %c)
      declare ppc_fp128 @llvm.fma.ppcf128(ppc_fp128 %a, ppc_fp128 %b, ppc_fp128 %c)

Overview:
"""""""""

The '``llvm.fma.*``' intrinsics perform the fused multiply-add
operation.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``fma`` functions
would, and does not set errno.

'``llvm.fabs.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.fabs`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.fabs.f32(float  %Val)
      declare double    @llvm.fabs.f64(double %Val)
      declare x86_fp80  @llvm.fabs.f80(x86_fp80 %Val)
      declare fp128     @llvm.fabs.f128(fp128 %Val)
      declare ppc_fp128 @llvm.fabs.ppcf128(ppc_fp128 %Val)

Overview:
"""""""""

The '``llvm.fabs.*``' intrinsics return the absolute value of the
operand.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``fabs`` functions
would, and handles error conditions in the same way.

'``llvm.minnum.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.minnum`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.minnum.f32(float %Val0, float %Val1)
      declare double    @llvm.minnum.f64(double %Val0, double %Val1)
      declare x86_fp80  @llvm.minnum.f80(x86_fp80 %Val0, x86_fp80 %Val1)
      declare fp128     @llvm.minnum.f128(fp128 %Val0, fp128 %Val1)
      declare ppc_fp128 @llvm.minnum.ppcf128(ppc_fp128 %Val0, ppc_fp128 %Val1)

Overview:
"""""""""

The '``llvm.minnum.*``' intrinsics return the minimum of the two
arguments.


Arguments:
""""""""""

The arguments and return value are floating point numbers of the same
type.

Semantics:
""""""""""

Follows the IEEE-754 semantics for minNum, which also match for libm's
fmin.

If either operand is a NaN, returns the other non-NaN operand. Returns
NaN only if both operands are NaN. If the operands compare equal,
returns a value that compares equal to both operands. This means that
fmin(+/-0.0, +/-0.0) could return either -0.0 or 0.0.

'``llvm.maxnum.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.maxnum`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.maxnum.f32(float  %Val0, float  %Val1l)
      declare double    @llvm.maxnum.f64(double %Val0, double %Val1)
      declare x86_fp80  @llvm.maxnum.f80(x86_fp80  %Val0, x86_fp80  %Val1)
      declare fp128     @llvm.maxnum.f128(fp128 %Val0, fp128 %Val1)
      declare ppc_fp128 @llvm.maxnum.ppcf128(ppc_fp128  %Val0, ppc_fp128  %Val1)

Overview:
"""""""""

The '``llvm.maxnum.*``' intrinsics return the maximum of the two
arguments.


Arguments:
""""""""""

The arguments and return value are floating point numbers of the same
type.

Semantics:
""""""""""
Follows the IEEE-754 semantics for maxNum, which also match for libm's
fmax.

If either operand is a NaN, returns the other non-NaN operand. Returns
NaN only if both operands are NaN. If the operands compare equal,
returns a value that compares equal to both operands. This means that
fmax(+/-0.0, +/-0.0) could return either -0.0 or 0.0.

'``llvm.copysign.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.copysign`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.copysign.f32(float  %Mag, float  %Sgn)
      declare double    @llvm.copysign.f64(double %Mag, double %Sgn)
      declare x86_fp80  @llvm.copysign.f80(x86_fp80  %Mag, x86_fp80  %Sgn)
      declare fp128     @llvm.copysign.f128(fp128 %Mag, fp128 %Sgn)
      declare ppc_fp128 @llvm.copysign.ppcf128(ppc_fp128  %Mag, ppc_fp128  %Sgn)

Overview:
"""""""""

The '``llvm.copysign.*``' intrinsics return a value with the magnitude of the
first operand and the sign of the second operand.

Arguments:
""""""""""

The arguments and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``copysign``
functions would, and handles error conditions in the same way.

'``llvm.floor.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.floor`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.floor.f32(float  %Val)
      declare double    @llvm.floor.f64(double %Val)
      declare x86_fp80  @llvm.floor.f80(x86_fp80  %Val)
      declare fp128     @llvm.floor.f128(fp128 %Val)
      declare ppc_fp128 @llvm.floor.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.floor.*``' intrinsics return the floor of the operand.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``floor`` functions
would, and handles error conditions in the same way.

'``llvm.ceil.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.ceil`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.ceil.f32(float  %Val)
      declare double    @llvm.ceil.f64(double %Val)
      declare x86_fp80  @llvm.ceil.f80(x86_fp80  %Val)
      declare fp128     @llvm.ceil.f128(fp128 %Val)
      declare ppc_fp128 @llvm.ceil.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.ceil.*``' intrinsics return the ceiling of the operand.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``ceil`` functions
would, and handles error conditions in the same way.

'``llvm.trunc.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.trunc`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.trunc.f32(float  %Val)
      declare double    @llvm.trunc.f64(double %Val)
      declare x86_fp80  @llvm.trunc.f80(x86_fp80  %Val)
      declare fp128     @llvm.trunc.f128(fp128 %Val)
      declare ppc_fp128 @llvm.trunc.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.trunc.*``' intrinsics returns the operand rounded to the
nearest integer not larger in magnitude than the operand.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``trunc`` functions
would, and handles error conditions in the same way.

'``llvm.rint.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.rint`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.rint.f32(float  %Val)
      declare double    @llvm.rint.f64(double %Val)
      declare x86_fp80  @llvm.rint.f80(x86_fp80  %Val)
      declare fp128     @llvm.rint.f128(fp128 %Val)
      declare ppc_fp128 @llvm.rint.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.rint.*``' intrinsics returns the operand rounded to the
nearest integer. It may raise an inexact floating-point exception if the
operand isn't an integer.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``rint`` functions
would, and handles error conditions in the same way.

'``llvm.nearbyint.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.nearbyint`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.nearbyint.f32(float  %Val)
      declare double    @llvm.nearbyint.f64(double %Val)
      declare x86_fp80  @llvm.nearbyint.f80(x86_fp80  %Val)
      declare fp128     @llvm.nearbyint.f128(fp128 %Val)
      declare ppc_fp128 @llvm.nearbyint.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.nearbyint.*``' intrinsics returns the operand rounded to the
nearest integer.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``nearbyint``
functions would, and handles error conditions in the same way.

'``llvm.round.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.round`` on any
floating point or vector of floating point type. Not all targets support
all types however.

::

      declare float     @llvm.round.f32(float  %Val)
      declare double    @llvm.round.f64(double %Val)
      declare x86_fp80  @llvm.round.f80(x86_fp80  %Val)
      declare fp128     @llvm.round.f128(fp128 %Val)
      declare ppc_fp128 @llvm.round.ppcf128(ppc_fp128  %Val)

Overview:
"""""""""

The '``llvm.round.*``' intrinsics returns the operand rounded to the
nearest integer.

Arguments:
""""""""""

The argument and return value are floating point numbers of the same
type.

Semantics:
""""""""""

This function returns the same values as the libm ``round``
functions would, and handles error conditions in the same way.

Bit Manipulation Intrinsics
---------------------------

LLVM provides intrinsics for a few important bit manipulation
operations. These allow efficient code generation for some algorithms.

'``llvm.bswap.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic function. You can use bswap on any
integer type that is an even number of bytes (i.e. BitWidth % 16 == 0).

::

      declare i16 @llvm.bswap.i16(i16 <id>)
      declare i32 @llvm.bswap.i32(i32 <id>)
      declare i64 @llvm.bswap.i64(i64 <id>)

Overview:
"""""""""

The '``llvm.bswap``' family of intrinsics is used to byte swap integer
values with an even number of bytes (positive multiple of 16 bits).
These are useful for performing operations on data that is not in the
target's native byte order.

Semantics:
""""""""""

The ``llvm.bswap.i16`` intrinsic returns an i16 value that has the high
and low byte of the input i16 swapped. Similarly, the ``llvm.bswap.i32``
intrinsic returns an i32 value that has the four bytes of the input i32
swapped, so that if the input bytes are numbered 0, 1, 2, 3 then the
returned i32 will have its bytes in 3, 2, 1, 0 order. The
``llvm.bswap.i48``, ``llvm.bswap.i64`` and other intrinsics extend this
concept to additional even-byte lengths (6 bytes, 8 bytes and more,
respectively).

'``llvm.ctpop.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use llvm.ctpop on any integer
bit width, or on any vector with integer elements. Not all targets
support all bit widths or vector types, however.

::

      declare i8 @llvm.ctpop.i8(i8  <src>)
      declare i16 @llvm.ctpop.i16(i16 <src>)
      declare i32 @llvm.ctpop.i32(i32 <src>)
      declare i64 @llvm.ctpop.i64(i64 <src>)
      declare i256 @llvm.ctpop.i256(i256 <src>)
      declare <2 x i32> @llvm.ctpop.v2i32(<2 x i32> <src>)

Overview:
"""""""""

The '``llvm.ctpop``' family of intrinsics counts the number of bits set
in a value.

Arguments:
""""""""""

The only argument is the value to be counted. The argument may be of any
integer type, or a vector with integer elements. The return type must
match the argument type.

Semantics:
""""""""""

The '``llvm.ctpop``' intrinsic counts the 1's in a variable, or within
each element of a vector.

'``llvm.ctlz.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.ctlz`` on any
integer bit width, or any vector whose elements are integers. Not all
targets support all bit widths or vector types, however.

::

      declare i8   @llvm.ctlz.i8  (i8   <src>, i1 <is_zero_undef>)
      declare i16  @llvm.ctlz.i16 (i16  <src>, i1 <is_zero_undef>)
      declare i32  @llvm.ctlz.i32 (i32  <src>, i1 <is_zero_undef>)
      declare i64  @llvm.ctlz.i64 (i64  <src>, i1 <is_zero_undef>)
      declare i256 @llvm.ctlz.i256(i256 <src>, i1 <is_zero_undef>)
      declase <2 x i32> @llvm.ctlz.v2i32(<2 x i32> <src>, i1 <is_zero_undef>)

Overview:
"""""""""

The '``llvm.ctlz``' family of intrinsic functions counts the number of
leading zeros in a variable.

Arguments:
""""""""""

The first argument is the value to be counted. This argument may be of
any integer type, or a vector with integer element type. The return
type must match the first argument type.

The second argument must be a constant and is a flag to indicate whether
the intrinsic should ensure that a zero as the first argument produces a
defined result. Historically some architectures did not provide a
defined result for zero values as efficiently, and many algorithms are
now predicated on avoiding zero-value inputs.

Semantics:
""""""""""

The '``llvm.ctlz``' intrinsic counts the leading (most significant)
zeros in a variable, or within each element of the vector. If
``src == 0`` then the result is the size in bits of the type of ``src``
if ``is_zero_undef == 0`` and ``undef`` otherwise. For example,
``llvm.ctlz(i32 2) = 30``.

'``llvm.cttz.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.cttz`` on any
integer bit width, or any vector of integer elements. Not all targets
support all bit widths or vector types, however.

::

      declare i8   @llvm.cttz.i8  (i8   <src>, i1 <is_zero_undef>)
      declare i16  @llvm.cttz.i16 (i16  <src>, i1 <is_zero_undef>)
      declare i32  @llvm.cttz.i32 (i32  <src>, i1 <is_zero_undef>)
      declare i64  @llvm.cttz.i64 (i64  <src>, i1 <is_zero_undef>)
      declare i256 @llvm.cttz.i256(i256 <src>, i1 <is_zero_undef>)
      declase <2 x i32> @llvm.cttz.v2i32(<2 x i32> <src>, i1 <is_zero_undef>)

Overview:
"""""""""

The '``llvm.cttz``' family of intrinsic functions counts the number of
trailing zeros.

Arguments:
""""""""""

The first argument is the value to be counted. This argument may be of
any integer type, or a vector with integer element type. The return
type must match the first argument type.

The second argument must be a constant and is a flag to indicate whether
the intrinsic should ensure that a zero as the first argument produces a
defined result. Historically some architectures did not provide a
defined result for zero values as efficiently, and many algorithms are
now predicated on avoiding zero-value inputs.

Semantics:
""""""""""

The '``llvm.cttz``' intrinsic counts the trailing (least significant)
zeros in a variable, or within each element of a vector. If ``src == 0``
then the result is the size in bits of the type of ``src`` if
``is_zero_undef == 0`` and ``undef`` otherwise. For example,
``llvm.cttz(2) = 1``.

.. _int_overflow:

Arithmetic with Overflow Intrinsics
-----------------------------------

LLVM provides intrinsics for some arithmetic with overflow operations.

'``llvm.sadd.with.overflow.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.sadd.with.overflow``
on any integer bit width.

::

      declare {i16, i1} @llvm.sadd.with.overflow.i16(i16 %a, i16 %b)
      declare {i32, i1} @llvm.sadd.with.overflow.i32(i32 %a, i32 %b)
      declare {i64, i1} @llvm.sadd.with.overflow.i64(i64 %a, i64 %b)

Overview:
"""""""""

The '``llvm.sadd.with.overflow``' family of intrinsic functions perform
a signed addition of the two arguments, and indicate whether an overflow
occurred during the signed summation.

Arguments:
""""""""""

The arguments (%a and %b) and the first element of the result structure
may be of integer types of any bit width, but they must have the same
bit width. The second element of the result structure must be of type
``i1``. ``%a`` and ``%b`` are the two values that will undergo signed
addition.

Semantics:
""""""""""

The '``llvm.sadd.with.overflow``' family of intrinsic functions perform
a signed addition of the two variables. They return a structure --- the
first element of which is the signed summation, and the second element
of which is a bit specifying if the signed summation resulted in an
overflow.

Examples:
"""""""""

.. code-block:: llvm

      %res = call {i32, i1} @llvm.sadd.with.overflow.i32(i32 %a, i32 %b)
      %sum = extractvalue {i32, i1} %res, 0
      %obit = extractvalue {i32, i1} %res, 1
      br i1 %obit, label %overflow, label %normal

'``llvm.uadd.with.overflow.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.uadd.with.overflow``
on any integer bit width.

::

      declare {i16, i1} @llvm.uadd.with.overflow.i16(i16 %a, i16 %b)
      declare {i32, i1} @llvm.uadd.with.overflow.i32(i32 %a, i32 %b)
      declare {i64, i1} @llvm.uadd.with.overflow.i64(i64 %a, i64 %b)

Overview:
"""""""""

The '``llvm.uadd.with.overflow``' family of intrinsic functions perform
an unsigned addition of the two arguments, and indicate whether a carry
occurred during the unsigned summation.

Arguments:
""""""""""

The arguments (%a and %b) and the first element of the result structure
may be of integer types of any bit width, but they must have the same
bit width. The second element of the result structure must be of type
``i1``. ``%a`` and ``%b`` are the two values that will undergo unsigned
addition.

Semantics:
""""""""""

The '``llvm.uadd.with.overflow``' family of intrinsic functions perform
an unsigned addition of the two arguments. They return a structure --- the
first element of which is the sum, and the second element of which is a
bit specifying if the unsigned summation resulted in a carry.

Examples:
"""""""""

.. code-block:: llvm

      %res = call {i32, i1} @llvm.uadd.with.overflow.i32(i32 %a, i32 %b)
      %sum = extractvalue {i32, i1} %res, 0
      %obit = extractvalue {i32, i1} %res, 1
      br i1 %obit, label %carry, label %normal

'``llvm.ssub.with.overflow.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.ssub.with.overflow``
on any integer bit width.

::

      declare {i16, i1} @llvm.ssub.with.overflow.i16(i16 %a, i16 %b)
      declare {i32, i1} @llvm.ssub.with.overflow.i32(i32 %a, i32 %b)
      declare {i64, i1} @llvm.ssub.with.overflow.i64(i64 %a, i64 %b)

Overview:
"""""""""

The '``llvm.ssub.with.overflow``' family of intrinsic functions perform
a signed subtraction of the two arguments, and indicate whether an
overflow occurred during the signed subtraction.

Arguments:
""""""""""

The arguments (%a and %b) and the first element of the result structure
may be of integer types of any bit width, but they must have the same
bit width. The second element of the result structure must be of type
``i1``. ``%a`` and ``%b`` are the two values that will undergo signed
subtraction.

Semantics:
""""""""""

The '``llvm.ssub.with.overflow``' family of intrinsic functions perform
a signed subtraction of the two arguments. They return a structure --- the
first element of which is the subtraction, and the second element of
which is a bit specifying if the signed subtraction resulted in an
overflow.

Examples:
"""""""""

.. code-block:: llvm

      %res = call {i32, i1} @llvm.ssub.with.overflow.i32(i32 %a, i32 %b)
      %sum = extractvalue {i32, i1} %res, 0
      %obit = extractvalue {i32, i1} %res, 1
      br i1 %obit, label %overflow, label %normal

'``llvm.usub.with.overflow.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.usub.with.overflow``
on any integer bit width.

::

      declare {i16, i1} @llvm.usub.with.overflow.i16(i16 %a, i16 %b)
      declare {i32, i1} @llvm.usub.with.overflow.i32(i32 %a, i32 %b)
      declare {i64, i1} @llvm.usub.with.overflow.i64(i64 %a, i64 %b)

Overview:
"""""""""

The '``llvm.usub.with.overflow``' family of intrinsic functions perform
an unsigned subtraction of the two arguments, and indicate whether an
overflow occurred during the unsigned subtraction.

Arguments:
""""""""""

The arguments (%a and %b) and the first element of the result structure
may be of integer types of any bit width, but they must have the same
bit width. The second element of the result structure must be of type
``i1``. ``%a`` and ``%b`` are the two values that will undergo unsigned
subtraction.

Semantics:
""""""""""

The '``llvm.usub.with.overflow``' family of intrinsic functions perform
an unsigned subtraction of the two arguments. They return a structure ---
the first element of which is the subtraction, and the second element of
which is a bit specifying if the unsigned subtraction resulted in an
overflow.

Examples:
"""""""""

.. code-block:: llvm

      %res = call {i32, i1} @llvm.usub.with.overflow.i32(i32 %a, i32 %b)
      %sum = extractvalue {i32, i1} %res, 0
      %obit = extractvalue {i32, i1} %res, 1
      br i1 %obit, label %overflow, label %normal

'``llvm.smul.with.overflow.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.smul.with.overflow``
on any integer bit width.

::

      declare {i16, i1} @llvm.smul.with.overflow.i16(i16 %a, i16 %b)
      declare {i32, i1} @llvm.smul.with.overflow.i32(i32 %a, i32 %b)
      declare {i64, i1} @llvm.smul.with.overflow.i64(i64 %a, i64 %b)

Overview:
"""""""""

The '``llvm.smul.with.overflow``' family of intrinsic functions perform
a signed multiplication of the two arguments, and indicate whether an
overflow occurred during the signed multiplication.

Arguments:
""""""""""

The arguments (%a and %b) and the first element of the result structure
may be of integer types of any bit width, but they must have the same
bit width. The second element of the result structure must be of type
``i1``. ``%a`` and ``%b`` are the two values that will undergo signed
multiplication.

Semantics:
""""""""""

The '``llvm.smul.with.overflow``' family of intrinsic functions perform
a signed multiplication of the two arguments. They return a structure ---
the first element of which is the multiplication, and the second element
of which is a bit specifying if the signed multiplication resulted in an
overflow.

Examples:
"""""""""

.. code-block:: llvm

      %res = call {i32, i1} @llvm.smul.with.overflow.i32(i32 %a, i32 %b)
      %sum = extractvalue {i32, i1} %res, 0
      %obit = extractvalue {i32, i1} %res, 1
      br i1 %obit, label %overflow, label %normal

'``llvm.umul.with.overflow.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.umul.with.overflow``
on any integer bit width.

::

      declare {i16, i1} @llvm.umul.with.overflow.i16(i16 %a, i16 %b)
      declare {i32, i1} @llvm.umul.with.overflow.i32(i32 %a, i32 %b)
      declare {i64, i1} @llvm.umul.with.overflow.i64(i64 %a, i64 %b)

Overview:
"""""""""

The '``llvm.umul.with.overflow``' family of intrinsic functions perform
a unsigned multiplication of the two arguments, and indicate whether an
overflow occurred during the unsigned multiplication.

Arguments:
""""""""""

The arguments (%a and %b) and the first element of the result structure
may be of integer types of any bit width, but they must have the same
bit width. The second element of the result structure must be of type
``i1``. ``%a`` and ``%b`` are the two values that will undergo unsigned
multiplication.

Semantics:
""""""""""

The '``llvm.umul.with.overflow``' family of intrinsic functions perform
an unsigned multiplication of the two arguments. They return a structure ---
the first element of which is the multiplication, and the second
element of which is a bit specifying if the unsigned multiplication
resulted in an overflow.

Examples:
"""""""""

.. code-block:: llvm

      %res = call {i32, i1} @llvm.umul.with.overflow.i32(i32 %a, i32 %b)
      %sum = extractvalue {i32, i1} %res, 0
      %obit = extractvalue {i32, i1} %res, 1
      br i1 %obit, label %overflow, label %normal

Specialised Arithmetic Intrinsics
---------------------------------

'``llvm.canonicalize.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare float @llvm.canonicalize.f32(float %a)
      declare double @llvm.canonicalize.f64(double %b)

Overview:
"""""""""

The '``llvm.canonicalize.*``' intrinsic returns the platform specific canonical
encoding of a floating point number. This canonicalization is useful for
implementing certain numeric primitives such as frexp. The canonical encoding is
defined by IEEE-754-2008 to be:

::

      2.1.8 canonical encoding: The preferred encoding of a floating-point
      representation in a format. Applied to declets, significands of finite
      numbers, infinities, and NaNs, especially in decimal formats.

This operation can also be considered equivalent to the IEEE-754-2008
conversion of a floating-point value to the same format. NaNs are handled
according to section 6.2.

Examples of non-canonical encodings:

- x87 pseudo denormals, pseudo NaNs, pseudo Infinity, Unnormals. These are
  converted to a canonical representation per hardware-specific protocol.
- Many normal decimal floating point numbers have non-canonical alternative
  encodings.
- Some machines, like GPUs or ARMv7 NEON, do not support subnormal values.
  These are treated as non-canonical encodings of zero and with be flushed to
  a zero of the same sign by this operation.

Note that per IEEE-754-2008 6.2, systems that support signaling NaNs with
default exception handling must signal an invalid exception, and produce a
quiet NaN result.

This function should always be implementable as multiplication by 1.0, provided
that the compiler does not constant fold the operation. Likewise, division by
1.0 and ``llvm.minnum(x, x)`` are possible implementations. Addition with
-0.0 is also sufficient provided that the rounding mode is not -Infinity.

``@llvm.canonicalize`` must preserve the equality relation. That is:

- ``(@llvm.canonicalize(x) == x)`` is equivalent to ``(x == x)``
- ``(@llvm.canonicalize(x) == @llvm.canonicalize(y))`` is equivalent to
  to ``(x == y)``

Additionally, the sign of zero must be conserved:
``@llvm.canonicalize(-0.0) = -0.0`` and ``@llvm.canonicalize(+0.0) = +0.0``

The payload bits of a NaN must be conserved, with two exceptions.
First, environments which use only a single canonical representation of NaN
must perform said canonicalization. Second, SNaNs must be quieted per the
usual methods.

The canonicalization operation may be optimized away if:

- The input is known to be canonical. For example, it was produced by a
  floating-point operation that is required by the standard to be canonical.
- The result is consumed only by (or fused with) other floating-point
  operations. That is, the bits of the floating point value are not examined.

'``llvm.fmuladd.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare float @llvm.fmuladd.f32(float %a, float %b, float %c)
      declare double @llvm.fmuladd.f64(double %a, double %b, double %c)

Overview:
"""""""""

The '``llvm.fmuladd.*``' intrinsic functions represent multiply-add
expressions that can be fused if the code generator determines that (a) the
target instruction set has support for a fused operation, and (b) that the
fused operation is more efficient than the equivalent, separate pair of mul
and add instructions.

Arguments:
""""""""""

The '``llvm.fmuladd.*``' intrinsics each take three arguments: two
multiplicands, a and b, and an addend c.

Semantics:
""""""""""

The expression:

::

      %0 = call float @llvm.fmuladd.f32(%a, %b, %c)

is equivalent to the expression a \* b + c, except that rounding will
not be performed between the multiplication and addition steps if the
code generator fuses the operations. Fusion is not guaranteed, even if
the target platform supports it. If a fused multiply-add is required the
corresponding llvm.fma.\* intrinsic function should be used
instead. This never sets errno, just as '``llvm.fma.*``'.

Examples:
"""""""""

.. code-block:: llvm

      %r2 = call float @llvm.fmuladd.f32(float %a, float %b, float %c) ; yields float:r2 = (a * b) + c


'``llvm.uabsdiff.*``' and '``llvm.sabsdiff.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""
This is an overloaded intrinsic. The loaded data is a vector of any integer bit width.

.. code-block:: llvm

      declare <4 x integer> @llvm.uabsdiff.v4i32(<4 x integer> %a, <4 x integer> %b)


Overview:
"""""""""

The ``llvm.uabsdiff`` intrinsic returns a vector result of the absolute difference of the two operands,
treating them both as unsigned integers.

The ``llvm.sabsdiff`` intrinsic returns a vector result of the absolute difference of the two operands,
treating them both as signed integers.

.. note::

    These intrinsics are primarily used during the code generation stage of compilation.
    They are generated by compiler passes such as the Loop and SLP vectorizers.it is not
    recommended for users to create them manually.

Arguments:
""""""""""

Both intrinsics take two integer of the same bitwidth.

Semantics:
""""""""""

The expression::

    call <4 x i32> @llvm.uabsdiff.v4i32(<4 x i32> %a, <4 x i32> %b)

is equivalent to::

    %sub = sub <4 x i32> %a, %b
    %ispos = icmp ugt <4 x i32> %sub, <i32 -1, i32 -1, i32 -1, i32 -1>
    %neg = sub <4 x i32> zeroinitializer, %sub
    %1 = select <4 x i1> %ispos, <4 x i32> %sub, <4 x i32> %neg

Similarly the expression::

    call <4 x i32> @llvm.sabsdiff.v4i32(<4 x i32> %a, <4 x i32> %b)

is equivalent to::

    %sub = sub nsw <4 x i32> %a, %b
    %ispos = icmp sgt <4 x i32> %sub, <i32 -1, i32 -1, i32 -1, i32 -1>
    %neg = sub nsw <4 x i32> zeroinitializer, %sub
    %1 = select <4 x i1> %ispos, <4 x i32> %sub, <4 x i32> %neg


Half Precision Floating Point Intrinsics
----------------------------------------

For most target platforms, half precision floating point is a
storage-only format. This means that it is a dense encoding (in memory)
but does not support computation in the format.

This means that code must first load the half-precision floating point
value as an i16, then convert it to float with
:ref:`llvm.convert.from.fp16 <int_convert_from_fp16>`. Computation can
then be performed on the float value (including extending to double
etc). To store the value back to memory, it is first converted to float
if needed, then converted to i16 with
:ref:`llvm.convert.to.fp16 <int_convert_to_fp16>`, then storing as an
i16 value.

.. _int_convert_to_fp16:

'``llvm.convert.to.fp16``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i16 @llvm.convert.to.fp16.f32(float %a)
      declare i16 @llvm.convert.to.fp16.f64(double %a)

Overview:
"""""""""

The '``llvm.convert.to.fp16``' intrinsic function performs a conversion from a
conventional floating point type to half precision floating point format.

Arguments:
""""""""""

The intrinsic function contains single argument - the value to be
converted.

Semantics:
""""""""""

The '``llvm.convert.to.fp16``' intrinsic function performs a conversion from a
conventional floating point format to half precision floating point format. The
return value is an ``i16`` which contains the converted number.

Examples:
"""""""""

.. code-block:: llvm

      %res = call i16 @llvm.convert.to.fp16.f32(float %a)
      store i16 %res, i16* @x, align 2

.. _int_convert_from_fp16:

'``llvm.convert.from.fp16``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare float @llvm.convert.from.fp16.f32(i16 %a)
      declare double @llvm.convert.from.fp16.f64(i16 %a)

Overview:
"""""""""

The '``llvm.convert.from.fp16``' intrinsic function performs a
conversion from half precision floating point format to single precision
floating point format.

Arguments:
""""""""""

The intrinsic function contains single argument - the value to be
converted.

Semantics:
""""""""""

The '``llvm.convert.from.fp16``' intrinsic function performs a
conversion from half single precision floating point format to single
precision floating point format. The input half-float value is
represented by an ``i16`` value.

Examples:
"""""""""

.. code-block:: llvm

      %a = load i16, i16* @x, align 2
      %res = call float @llvm.convert.from.fp16(i16 %a)

.. _dbg_intrinsics:

Debugger Intrinsics
-------------------

The LLVM debugger intrinsics (which all start with ``llvm.dbg.``
prefix), are described in the `LLVM Source Level
Debugging <SourceLevelDebugging.html#format_common_intrinsics>`_
document.

Exception Handling Intrinsics
-----------------------------

The LLVM exception handling intrinsics (which all start with
``llvm.eh.`` prefix), are described in the `LLVM Exception
Handling <ExceptionHandling.html#format_common_intrinsics>`_ document.

.. _int_trampoline:

Trampoline Intrinsics
---------------------

These intrinsics make it possible to excise one parameter, marked with
the :ref:`nest <nest>` attribute, from a function. The result is a
callable function pointer lacking the nest parameter - the caller does
not need to provide a value for it. Instead, the value to use is stored
in advance in a "trampoline", a block of memory usually allocated on the
stack, which also contains code to splice the nest value into the
argument list. This is used to implement the GCC nested function address
extension.

For example, if the function is ``i32 f(i8* nest %c, i32 %x, i32 %y)``
then the resulting function pointer has signature ``i32 (i32, i32)*``.
It can be created as follows:

.. code-block:: llvm

      %tramp = alloca [10 x i8], align 4 ; size and alignment only correct for X86
      %tramp1 = getelementptr [10 x i8], [10 x i8]* %tramp, i32 0, i32 0
      call i8* @llvm.init.trampoline(i8* %tramp1, i8* bitcast (i32 (i8*, i32, i32)* @f to i8*), i8* %nval)
      %p = call i8* @llvm.adjust.trampoline(i8* %tramp1)
      %fp = bitcast i8* %p to i32 (i32, i32)*

The call ``%val = call i32 %fp(i32 %x, i32 %y)`` is then equivalent to
``%val = call i32 %f(i8* %nval, i32 %x, i32 %y)``.

.. _int_it:

'``llvm.init.trampoline``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.init.trampoline(i8* <tramp>, i8* <func>, i8* <nval>)

Overview:
"""""""""

This fills the memory pointed to by ``tramp`` with executable code,
turning it into a trampoline.

Arguments:
""""""""""

The ``llvm.init.trampoline`` intrinsic takes three arguments, all
pointers. The ``tramp`` argument must point to a sufficiently large and
sufficiently aligned block of memory; this memory is written to by the
intrinsic. Note that the size and the alignment are target-specific -
LLVM currently provides no portable way of determining them, so a
front-end that generates this intrinsic needs to have some
target-specific knowledge. The ``func`` argument must hold a function
bitcast to an ``i8*``.

Semantics:
""""""""""

The block of memory pointed to by ``tramp`` is filled with target
dependent code, turning it into a function. Then ``tramp`` needs to be
passed to :ref:`llvm.adjust.trampoline <int_at>` to get a pointer which can
be :ref:`bitcast (to a new function) and called <int_trampoline>`. The new
function's signature is the same as that of ``func`` with any arguments
marked with the ``nest`` attribute removed. At most one such ``nest``
argument is allowed, and it must be of pointer type. Calling the new
function is equivalent to calling ``func`` with the same argument list,
but with ``nval`` used for the missing ``nest`` argument. If, after
calling ``llvm.init.trampoline``, the memory pointed to by ``tramp`` is
modified, then the effect of any later call to the returned function
pointer is undefined.

.. _int_at:

'``llvm.adjust.trampoline``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i8* @llvm.adjust.trampoline(i8* <tramp>)

Overview:
"""""""""

This performs any required machine-specific adjustment to the address of
a trampoline (passed as ``tramp``).

Arguments:
""""""""""

``tramp`` must point to a block of memory which already has trampoline
code filled in by a previous call to
:ref:`llvm.init.trampoline <int_it>`.

Semantics:
""""""""""

On some architectures the address of the code to be executed needs to be
different than the address where the trampoline is actually stored. This
intrinsic returns the executable address corresponding to ``tramp``
after performing the required machine specific adjustments. The pointer
returned can then be :ref:`bitcast and executed <int_trampoline>`.

.. _int_mload_mstore:

Masked Vector Load and Store Intrinsics
---------------------------------------

LLVM provides intrinsics for predicated vector load and store operations. The predicate is specified by a mask operand, which holds one bit per vector element, switching the associated vector lane on or off. The memory addresses corresponding to the "off" lanes are not accessed. When all bits of the mask are on, the intrinsic is identical to a regular vector load or store. When all bits are off, no memory is accessed.

.. _int_mload:

'``llvm.masked.load.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""
This is an overloaded intrinsic. The loaded data is a vector of any integer or floating point data type.

::

      declare <16 x float> @llvm.masked.load.v16f32 (<16 x float>* <ptr>, i32 <alignment>, <16 x i1> <mask>, <16 x float> <passthru>)
      declare <2 x double> @llvm.masked.load.v2f64  (<2 x double>* <ptr>, i32 <alignment>, <2 x i1>  <mask>, <2 x double> <passthru>)

Overview:
"""""""""

Reads a vector from memory according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes. The masked-off lanes in the result vector are taken from the corresponding lanes of the '``passthru``' operand.


Arguments:
""""""""""

The first operand is the base pointer for the load. The second operand is the alignment of the source location. It must be a constant integer value. The third operand, mask, is a vector of boolean values with the same number of elements as the return type. The fourth is a pass-through value that is used to fill the masked-off lanes of the result. The return type, underlying type of the base pointer and the type of the '``passthru``' operand are the same vector types.


Semantics:
""""""""""

The '``llvm.masked.load``' intrinsic is designed for conditional reading of selected vector elements in a single IR operation. It is useful for targets that support vector masked loads and allows vectorizing predicated basic blocks on these targets. Other targets may support this intrinsic differently, for example by lowering it into a sequence of branches that guard scalar load operations.
The result of this operation is equivalent to a regular vector load instruction followed by a 'select' between the loaded and the passthru values, predicated on the same mask. However, using this intrinsic prevents exceptions on memory access to masked-off lanes.


::

       %res = call <16 x float> @llvm.masked.load.v16f32 (<16 x float>* %ptr, i32 4, <16 x i1>%mask, <16 x float> %passthru)

       ;; The result of the two following instructions is identical aside from potential memory access exception
       %loadlal = load <16 x float>, <16 x float>* %ptr, align 4
       %res = select <16 x i1> %mask, <16 x float> %loadlal, <16 x float> %passthru

.. _int_mstore:

'``llvm.masked.store.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""
This is an overloaded intrinsic. The data stored in memory is a vector of any integer or floating point data type.

::

       declare void @llvm.masked.store.v8i32 (<8 x i32>  <value>, <8 x i32> * <ptr>, i32 <alignment>,  <8 x i1>  <mask>)
       declare void @llvm.masked.store.v16f32(<16 x i32> <value>, <16 x i32>* <ptr>, i32 <alignment>,  <16 x i1> <mask>)

Overview:
"""""""""

Writes a vector to memory according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes.

Arguments:
""""""""""

The first operand is the vector value to be written to memory. The second operand is the base pointer for the store, it has the same underlying type as the value operand. The third operand is the alignment of the destination location. The fourth operand, mask, is a vector of boolean values. The types of the mask and the value operand must have the same number of vector elements.


Semantics:
""""""""""

The '``llvm.masked.store``' intrinsics is designed for conditional writing of selected vector elements in a single IR operation. It is useful for targets that support vector masked store and allows vectorizing predicated basic blocks on these targets. Other targets may support this intrinsic differently, for example by lowering it into a sequence of branches that guard scalar store operations.
The result of this operation is equivalent to a load-modify-store sequence. However, using this intrinsic prevents exceptions and data races on memory access to masked-off lanes.

::

       call void @llvm.masked.store.v16f32(<16 x float> %value, <16 x float>* %ptr, i32 4,  <16 x i1> %mask)

       ;; The result of the following instructions is identical aside from potential data races and memory access exceptions
       %oldval = load <16 x float>, <16 x float>* %ptr, align 4
       %res = select <16 x i1> %mask, <16 x float> %value, <16 x float> %oldval
       store <16 x float> %res, <16 x float>* %ptr, align 4


Masked Vector Gather and Scatter Intrinsics
-------------------------------------------

LLVM provides intrinsics for vector gather and scatter operations. They are similar to :ref:`Masked Vector Load and Store <int_mload_mstore>`, except they are designed for arbitrary memory accesses, rather than sequential memory accesses. Gather and scatter also employ a mask operand, which holds one bit per vector element, switching the associated vector lane on or off. The memory addresses corresponding to the "off" lanes are not accessed. When all bits are off, no memory is accessed.

.. _int_mgather:

'``llvm.masked.gather.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""
This is an overloaded intrinsic. The loaded data are multiple scalar values of any integer or floating point data type gathered together into one vector.

::

      declare <16 x float> @llvm.masked.gather.v16f32 (<16 x float*> <ptrs>, i32 <alignment>, <16 x i1> <mask>, <16 x float> <passthru>)
      declare <2 x double> @llvm.masked.gather.v2f64  (<2 x double*> <ptrs>, i32 <alignment>, <2 x i1>  <mask>, <2 x double> <passthru>)

Overview:
"""""""""

Reads scalar values from arbitrary memory locations and gathers them into one vector. The memory locations are provided in the vector of pointers '``ptrs``'. The memory is accessed according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes. The masked-off lanes in the result vector are taken from the corresponding lanes of the '``passthru``' operand.


Arguments:
""""""""""

The first operand is a vector of pointers which holds all memory addresses to read. The second operand is an alignment of the source addresses. It must be a constant integer value. The third operand, mask, is a vector of boolean values with the same number of elements as the return type. The fourth is a pass-through value that is used to fill the masked-off lanes of the result. The return type, underlying type of the vector of pointers and the type of the '``passthru``' operand are the same vector types.


Semantics:
""""""""""

The '``llvm.masked.gather``' intrinsic is designed for conditional reading of multiple scalar values from arbitrary memory locations in a single IR operation. It is useful for targets that support vector masked gathers and allows vectorizing basic blocks with data and control divergence. Other targets may support this intrinsic differently, for example by lowering it into a sequence of scalar load operations.
The semantics of this operation are equivalent to a sequence of conditional scalar loads with subsequent gathering all loaded values into a single vector. The mask restricts memory access to certain lanes and facilitates vectorization of predicated basic blocks.


::

       %res = call <4 x double> @llvm.masked.gather.v4f64 (<4 x double*> %ptrs, i32 8, <4 x i1>%mask, <4 x double> <true, true, true, true>)

       ;; The gather with all-true mask is equivalent to the following instruction sequence
       %ptr0 = extractelement <4 x double*> %ptrs, i32 0
       %ptr1 = extractelement <4 x double*> %ptrs, i32 1
       %ptr2 = extractelement <4 x double*> %ptrs, i32 2
       %ptr3 = extractelement <4 x double*> %ptrs, i32 3

       %val0 = load double, double* %ptr0, align 8
       %val1 = load double, double* %ptr1, align 8
       %val2 = load double, double* %ptr2, align 8
       %val3 = load double, double* %ptr3, align 8

       %vec0    = insertelement <4 x double>undef, %val0, 0
       %vec01   = insertelement <4 x double>%vec0, %val1, 1
       %vec012  = insertelement <4 x double>%vec01, %val2, 2
       %vec0123 = insertelement <4 x double>%vec012, %val3, 3

.. _int_mscatter:

'``llvm.masked.scatter.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""
This is an overloaded intrinsic. The data stored in memory is a vector of any integer or floating point data type. Each vector element is stored in an arbitrary memory addresses. Scatter with overlapping addresses is guaranteed to be ordered from least-significant to most-significant element.

::

       declare void @llvm.masked.scatter.v8i32 (<8 x i32>  <value>, <8 x i32*>  <ptrs>, i32 <alignment>,  <8 x i1>  <mask>)
       declare void @llvm.masked.scatter.v16f32(<16 x i32> <value>, <16 x i32*> <ptrs>, i32 <alignment>,  <16 x i1> <mask>)

Overview:
"""""""""

Writes each element from the value vector to the corresponding memory address. The memory addresses are represented as a vector of pointers. Writing is done according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes.

Arguments:
""""""""""

The first operand is a vector value to be written to memory. The second operand is a vector of pointers, pointing to where the value elements should be stored. It has the same underlying type as the value operand. The third operand is an alignment of the destination addresses. The fourth operand, mask, is a vector of boolean values. The types of the mask and the value operand must have the same number of vector elements.


Semantics:
""""""""""

The '``llvm.masked.scatter``' intrinsics is designed for writing selected vector elements to arbitrary memory addresses in a single IR operation. The operation may be conditional, when not all bits in the mask are switched on. It is useful for targets that support vector masked scatter and allows vectorizing basic blocks with data and control divergency. Other targets may support this intrinsic differently, for example by lowering it into a sequence of branches that guard scalar store operations.

::

       ;; This instruction unconditionaly stores data vector in multiple addresses
       call @llvm.masked.scatter.v8i32 (<8 x i32> %value, <8 x i32*> %ptrs, i32 4,  <8 x i1>  <true, true, .. true>)

       ;; It is equivalent to a list of scalar stores
       %val0 = extractelement <8 x i32> %value, i32 0
       %val1 = extractelement <8 x i32> %value, i32 1
       ..
       %val7 = extractelement <8 x i32> %value, i32 7
       %ptr0 = extractelement <8 x i32*> %ptrs, i32 0
       %ptr1 = extractelement <8 x i32*> %ptrs, i32 1
       ..
       %ptr7 = extractelement <8 x i32*> %ptrs, i32 7
       ;; Note: the order of the following stores is important when they overlap:
       store i32 %val0, i32* %ptr0, align 4
       store i32 %val1, i32* %ptr1, align 4
       ..
       store i32 %val7, i32* %ptr7, align 4


Memory Use Markers
------------------

This class of intrinsics provides information about the lifetime of
memory objects and ranges where variables are immutable.

.. _int_lifestart:

'``llvm.lifetime.start``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.lifetime.start(i64 <size>, i8* nocapture <ptr>)

Overview:
"""""""""

The '``llvm.lifetime.start``' intrinsic specifies the start of a memory
object's lifetime.

Arguments:
""""""""""

The first argument is a constant integer representing the size of the
object, or -1 if it is variable sized. The second argument is a pointer
to the object.

Semantics:
""""""""""

This intrinsic indicates that before this point in the code, the value
of the memory pointed to by ``ptr`` is dead. This means that it is known
to never be used and has an undefined value. A load from the pointer
that precedes this intrinsic can be replaced with ``'undef'``.

.. _int_lifeend:

'``llvm.lifetime.end``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.lifetime.end(i64 <size>, i8* nocapture <ptr>)

Overview:
"""""""""

The '``llvm.lifetime.end``' intrinsic specifies the end of a memory
object's lifetime.

Arguments:
""""""""""

The first argument is a constant integer representing the size of the
object, or -1 if it is variable sized. The second argument is a pointer
to the object.

Semantics:
""""""""""

This intrinsic indicates that after this point in the code, the value of
the memory pointed to by ``ptr`` is dead. This means that it is known to
never be used and has an undefined value. Any stores into the memory
object following this intrinsic may be removed as dead.

'``llvm.invariant.start``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare {}* @llvm.invariant.start(i64 <size>, i8* nocapture <ptr>)

Overview:
"""""""""

The '``llvm.invariant.start``' intrinsic specifies that the contents of
a memory object will not change.

Arguments:
""""""""""

The first argument is a constant integer representing the size of the
object, or -1 if it is variable sized. The second argument is a pointer
to the object.

Semantics:
""""""""""

This intrinsic indicates that until an ``llvm.invariant.end`` that uses
the return value, the referenced memory location is constant and
unchanging.

'``llvm.invariant.end``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.invariant.end({}* <start>, i64 <size>, i8* nocapture <ptr>)

Overview:
"""""""""

The '``llvm.invariant.end``' intrinsic specifies that the contents of a
memory object are mutable.

Arguments:
""""""""""

The first argument is the matching ``llvm.invariant.start`` intrinsic.
The second argument is a constant integer representing the size of the
object, or -1 if it is variable sized and the third argument is a
pointer to the object.

Semantics:
""""""""""

This intrinsic indicates that the memory is mutable again.

General Intrinsics
------------------

This class of intrinsics is designed to be generic and has no specific
purpose.

'``llvm.var.annotation``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.var.annotation(i8* <val>, i8* <str>, i8* <str>, i32  <int>)

Overview:
"""""""""

The '``llvm.var.annotation``' intrinsic.

Arguments:
""""""""""

The first argument is a pointer to a value, the second is a pointer to a
global string, the third is a pointer to a global string which is the
source file name, and the last argument is the line number.

Semantics:
""""""""""

This intrinsic allows annotation of local variables with arbitrary
strings. This can be useful for special purpose optimizations that want
to look for these annotations. These have no other defined use; they are
ignored by code generation and optimization.

'``llvm.ptr.annotation.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use '``llvm.ptr.annotation``' on a
pointer to an integer of any width. *NOTE* you must specify an address space for
the pointer. The identifier for the default address space is the integer
'``0``'.

::

      declare i8*   @llvm.ptr.annotation.p<address space>i8(i8* <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i16*  @llvm.ptr.annotation.p<address space>i16(i16* <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i32*  @llvm.ptr.annotation.p<address space>i32(i32* <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i64*  @llvm.ptr.annotation.p<address space>i64(i64* <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i256* @llvm.ptr.annotation.p<address space>i256(i256* <val>, i8* <str>, i8* <str>, i32  <int>)

Overview:
"""""""""

The '``llvm.ptr.annotation``' intrinsic.

Arguments:
""""""""""

The first argument is a pointer to an integer value of arbitrary bitwidth
(result of some expression), the second is a pointer to a global string, the
third is a pointer to a global string which is the source file name, and the
last argument is the line number. It returns the value of the first argument.

Semantics:
""""""""""

This intrinsic allows annotation of a pointer to an integer with arbitrary
strings. This can be useful for special purpose optimizations that want to look
for these annotations. These have no other defined use; they are ignored by code
generation and optimization.

'``llvm.annotation.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use '``llvm.annotation``' on
any integer bit width.

::

      declare i8 @llvm.annotation.i8(i8 <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i16 @llvm.annotation.i16(i16 <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i32 @llvm.annotation.i32(i32 <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i64 @llvm.annotation.i64(i64 <val>, i8* <str>, i8* <str>, i32  <int>)
      declare i256 @llvm.annotation.i256(i256 <val>, i8* <str>, i8* <str>, i32  <int>)

Overview:
"""""""""

The '``llvm.annotation``' intrinsic.

Arguments:
""""""""""

The first argument is an integer value (result of some expression), the
second is a pointer to a global string, the third is a pointer to a
global string which is the source file name, and the last argument is
the line number. It returns the value of the first argument.

Semantics:
""""""""""

This intrinsic allows annotations to be put on arbitrary expressions
with arbitrary strings. This can be useful for special purpose
optimizations that want to look for these annotations. These have no
other defined use; they are ignored by code generation and optimization.

'``llvm.trap``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.trap() noreturn nounwind

Overview:
"""""""""

The '``llvm.trap``' intrinsic.

Arguments:
""""""""""

None.

Semantics:
""""""""""

This intrinsic is lowered to the target dependent trap instruction. If
the target does not have a trap instruction, this intrinsic will be
lowered to a call of the ``abort()`` function.

'``llvm.debugtrap``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.debugtrap() nounwind

Overview:
"""""""""

The '``llvm.debugtrap``' intrinsic.

Arguments:
""""""""""

None.

Semantics:
""""""""""

This intrinsic is lowered to code which is intended to cause an
execution trap with the intention of requesting the attention of a
debugger.

'``llvm.stackprotector``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.stackprotector(i8* <guard>, i8** <slot>)

Overview:
"""""""""

The ``llvm.stackprotector`` intrinsic takes the ``guard`` and stores it
onto the stack at ``slot``. The stack slot is adjusted to ensure that it
is placed on the stack before local variables.

Arguments:
""""""""""

The ``llvm.stackprotector`` intrinsic requires two pointer arguments.
The first argument is the value loaded from the stack guard
``@__stack_chk_guard``. The second variable is an ``alloca`` that has
enough space to hold the value of the guard.

Semantics:
""""""""""

This intrinsic causes the prologue/epilogue inserter to force the position of
the ``AllocaInst`` stack slot to be before local variables on the stack. This is
to ensure that if a local variable on the stack is overwritten, it will destroy
the value of the guard. When the function exits, the guard on the stack is
checked against the original guard by ``llvm.stackprotectorcheck``. If they are
different, then ``llvm.stackprotectorcheck`` causes the program to abort by
calling the ``__stack_chk_fail()`` function.

'``llvm.stackprotectorcheck``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.stackprotectorcheck(i8** <guard>)

Overview:
"""""""""

The ``llvm.stackprotectorcheck`` intrinsic compares ``guard`` against an already
created stack protector and if they are not equal calls the
``__stack_chk_fail()`` function.

Arguments:
""""""""""

The ``llvm.stackprotectorcheck`` intrinsic requires one pointer argument, the
the variable ``@__stack_chk_guard``.

Semantics:
""""""""""

This intrinsic is provided to perform the stack protector check by comparing
``guard`` with the stack slot created by ``llvm.stackprotector`` and if the
values do not match call the ``__stack_chk_fail()`` function.

The reason to provide this as an IR level intrinsic instead of implementing it
via other IR operations is that in order to perform this operation at the IR
level without an intrinsic, one would need to create additional basic blocks to
handle the success/failure cases. This makes it difficult to stop the stack
protector check from disrupting sibling tail calls in Codegen. With this
intrinsic, we are able to generate the stack protector basic blocks late in
codegen after the tail call decision has occurred.

'``llvm.objectsize``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i32 @llvm.objectsize.i32(i8* <object>, i1 <min>)
      declare i64 @llvm.objectsize.i64(i8* <object>, i1 <min>)

Overview:
"""""""""

The ``llvm.objectsize`` intrinsic is designed to provide information to
the optimizers to determine at compile time whether a) an operation
(like memcpy) will overflow a buffer that corresponds to an object, or
b) that a runtime check for overflow isn't necessary. An object in this
context means an allocation of a specific class, structure, array, or
other object.

Arguments:
""""""""""

The ``llvm.objectsize`` intrinsic takes two arguments. The first
argument is a pointer to or into the ``object``. The second argument is
a boolean and determines whether ``llvm.objectsize`` returns 0 (if true)
or -1 (if false) when the object size is unknown. The second argument
only accepts constants.

Semantics:
""""""""""

The ``llvm.objectsize`` intrinsic is lowered to a constant representing
the size of the object concerned. If the size cannot be determined at
compile time, ``llvm.objectsize`` returns ``i32/i64 -1 or 0`` (depending
on the ``min`` argument).

'``llvm.expect``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

This is an overloaded intrinsic. You can use ``llvm.expect`` on any
integer bit width.

::

      declare i1 @llvm.expect.i1(i1 <val>, i1 <expected_val>)
      declare i32 @llvm.expect.i32(i32 <val>, i32 <expected_val>)
      declare i64 @llvm.expect.i64(i64 <val>, i64 <expected_val>)

Overview:
"""""""""

The ``llvm.expect`` intrinsic provides information about expected (the
most probable) value of ``val``, which can be used by optimizers.

Arguments:
""""""""""

The ``llvm.expect`` intrinsic takes two arguments. The first argument is
a value. The second argument is an expected value, this needs to be a
constant value, variables are not allowed.

Semantics:
""""""""""

This intrinsic is lowered to the ``val``.

.. _int_assume:

'``llvm.assume``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.assume(i1 %cond)

Overview:
"""""""""

The ``llvm.assume`` allows the optimizer to assume that the provided
condition is true. This information can then be used in simplifying other parts
of the code.

Arguments:
""""""""""

The condition which the optimizer may assume is always true.

Semantics:
""""""""""

The intrinsic allows the optimizer to assume that the provided condition is
always true whenever the control flow reaches the intrinsic call. No code is
generated for this intrinsic, and instructions that contribute only to the
provided condition are not used for code generation. If the condition is
violated during execution, the behavior is undefined.

Note that the optimizer might limit the transformations performed on values
used by the ``llvm.assume`` intrinsic in order to preserve the instructions
only used to form the intrinsic's input argument. This might prove undesirable
if the extra information provided by the ``llvm.assume`` intrinsic does not cause
sufficient overall improvement in code quality. For this reason,
``llvm.assume`` should not be used to document basic mathematical invariants
that the optimizer can otherwise deduce or facts that are of little use to the
optimizer.

.. _bitset.test:

'``llvm.bitset.test``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare i1 @llvm.bitset.test(i8* %ptr, metadata %bitset) nounwind readnone


Arguments:
""""""""""

The first argument is a pointer to be tested. The second argument is a
metadata string containing the name of a :doc:`bitset <BitSets>`.

Overview:
"""""""""

The ``llvm.bitset.test`` intrinsic tests whether the given pointer is a
member of the given bitset.

'``llvm.donothing``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Syntax:
"""""""

::

      declare void @llvm.donothing() nounwind readnone

Overview:
"""""""""

The ``llvm.donothing`` intrinsic doesn't perform any operation. It's one of only
two intrinsics (besides ``llvm.experimental.patchpoint``) that can be called
with an invoke instruction.

Arguments:
""""""""""

None.

Semantics:
""""""""""

This intrinsic does nothing, and it's removed by optimizers and ignored
by codegen.

Stack Map Intrinsics
--------------------

LLVM provides experimental intrinsics to support runtime patching
mechanisms commonly desired in dynamic language JITs. These intrinsics
are described in :doc:`StackMaps`.