2 # SATA/PATA driver configuration
6 tristate "Serial ATA and Parallel ATA drivers"
9 depends on !(M32R || M68K) || BROKEN
12 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
13 any other ATA device under Linux, say Y and make sure that you know
14 the name of your ATA host adapter (the card inside your computer
15 that "speaks" the ATA protocol, also called ATA controller),
16 because you will be asked for it.
18 NOTE: ATA enables basic SCSI support; *however*,
19 'SCSI disk support', 'SCSI tape support', or
20 'SCSI CDROM support' may also be needed,
21 depending on your hardware configuration.
25 config ATA_NONSTANDARD
29 config ATA_VERBOSE_ERROR
30 bool "Verbose ATA error reporting"
33 This option adds parsing of ATA command descriptions and error bits
34 in libata kernel output, making it easier to interpret.
35 This option will enlarge the kernel by approx. 6KB. Disable it only
36 if kernel size is more important than ease of debugging.
41 bool "ATA ACPI Support"
42 depends on ACPI && PCI
45 This option adds support for ATA-related ACPI objects.
46 These ACPI objects add the ability to retrieve taskfiles
47 from the ACPI BIOS and write them to the disk controller.
48 These objects may be related to performance, security,
49 power management, or other areas.
50 You can disable this at kernel boot time by using the
51 option libata.noacpi=1
54 bool "SATA Port Multiplier support"
57 This option adds support for SATA Port Multipliers
58 (the SATA version of an ethernet hub, or SAS expander).
60 comment "Controllers with non-SFF native interface"
63 tristate "AHCI SATA support"
66 This option enables support for AHCI Serial ATA.
70 config SATA_AHCI_PLATFORM
71 tristate "Platform AHCI SATA support"
73 This option enables support for Platform AHCI Serial ATA
79 tristate "Freescale 3.0Gbps SATA support"
82 This option enables support for Freescale 3.0Gbps SATA controller.
83 It can be found on MPC837x and MPC8315.
88 tristate "Initio 162x SATA support"
91 This option enables support for Initio 162x Serial ATA.
94 tristate "Silicon Image 3124/3132 SATA support"
97 This option enables support for Silicon Image 3124/3132 Serial ATA.
102 bool "ATA SFF support"
105 This option adds support for ATA controllers with SFF
106 compliant or similar programming interface.
108 SFF is the legacy IDE interface that has been around since
109 the dawn of time. Almost all PATA controllers have an
110 SFF interface. Many SATA controllers have an SFF interface
111 when configured into a legacy compatibility mode.
113 For users with exclusively modern controllers like AHCI,
114 Silicon Image 3124, or Marvell 6440, you may choose to
115 disable this unneeded SFF support.
121 comment "SFF controllers with custom DMA interface"
124 tristate "Pacific Digital ADMA support"
127 This option enables support for Pacific Digital ADMA controllers
131 config PATA_OCTEON_CF
132 tristate "OCTEON Boot Bus Compact Flash support"
133 depends on CPU_CAVIUM_OCTEON
135 This option enables a polled compact flash driver for use with
136 compact flash cards attached to the OCTEON boot bus.
141 tristate "Pacific Digital SATA QStor support"
144 This option enables support for Pacific Digital Serial ATA QStor.
149 tristate "Promise SATA SX4 support (Experimental)"
150 depends on PCI && EXPERIMENTAL
152 This option enables support for Promise Serial ATA SX4.
157 bool "ATA BMDMA support"
160 This option adds support for SFF ATA controllers with BMDMA
161 capability. BMDMA stands for bus-master DMA and is the
162 de facto DMA interface for SFF controllers.
168 comment "SATA SFF controllers with BMDMA"
171 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
174 This option enables support for ICH5/6/7/8 Serial ATA
175 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
181 tristate "DesignWare Cores SATA support"
184 This option enables support for the on-chip SATA controller of the
185 AppliedMicro processor 460EX.
190 tristate "Marvell SATA support"
192 This option enables support for the Marvell Serial ATA family.
193 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
194 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
199 tristate "NVIDIA SATA support"
202 This option enables support for NVIDIA Serial ATA.
207 tristate "Promise SATA TX2/TX4 support"
210 This option enables support for Promise Serial ATA TX2/TX4.
215 tristate "Silicon Image SATA support"
218 This option enables support for Silicon Image Serial ATA.
223 tristate "SiS 964/965/966/180 SATA support"
227 This option enables support for SiS Serial ATA on
228 SiS 964/965/966/180 and Parallel ATA on SiS 180.
229 The PATA support for SiS 180 requires additionally to
230 enable the PATA_SIS driver in the config.
234 tristate "ServerWorks Frodo / Apple K2 SATA support"
237 This option enables support for Broadcom/Serverworks/Apple K2
243 tristate "ULi Electronics SATA support"
246 This option enables support for ULi Electronics SATA.
251 tristate "VIA SATA support"
254 This option enables support for VIA Serial ATA.
259 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
262 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
266 comment "PATA SFF controllers with BMDMA"
269 tristate "ALi PATA support"
272 This option enables support for the ALi ATA interfaces
273 found on the many ALi chipsets.
278 tristate "AMD/NVidia PATA support"
281 This option enables support for the AMD and NVidia PATA
282 interfaces found on the chipsets for Athlon/Athlon64.
287 tristate "ARTOP 6210/6260 PATA support"
290 This option enables support for ARTOP PATA controllers.
295 tristate "ATI PATA support"
298 This option enables support for the ATI ATA interfaces
299 found on the many ATI chipsets.
304 tristate "ARTOP/Acard ATP867X PATA support"
307 This option enables support for ARTOP/Acard ATP867X PATA
313 tristate "Blackfin 54x ATAPI support"
314 depends on BF542 || BF548 || BF549
316 This option enables support for the built-in ATAPI controller on
317 Blackfin 54x family chips.
322 tristate "CMD64x PATA support"
325 This option enables support for the CMD64x series chips
326 except for the CMD640.
331 tristate "CS5510/5520 PATA support"
334 This option enables support for the Cyrix 5510/5520
335 companion chip used with the MediaGX/Geode processor family.
340 tristate "CS5530 PATA support"
343 This option enables support for the Cyrix/NatSemi/AMD CS5530
344 companion chip used with the MediaGX/Geode processor family.
349 tristate "CS5535 PATA support (Experimental)"
350 depends on PCI && X86 && !X86_64 && EXPERIMENTAL
352 This option enables support for the NatSemi/AMD CS5535
353 companion chip used with the Geode processor family.
358 tristate "CS5536 PATA support"
361 This option enables support for the AMD CS5536
362 companion chip used with the Geode LX processor family.
367 tristate "Cypress CY82C693 PATA support (Very Experimental)"
368 depends on PCI && EXPERIMENTAL
370 This option enables support for the Cypress/Contaq CY82C693
371 chipset found in some Alpha systems
376 tristate "EFAR SLC90E66 support"
379 This option enables support for the EFAR SLC90E66
380 IDE controller found on some older machines.
385 tristate "HPT 366/368 PATA support"
388 This option enables support for the HPT 366 and 368
389 PATA controllers via the new ATA layer.
394 tristate "HPT 370/370A/371/372/374/302 PATA support"
397 This option enables support for the majority of the later HPT
398 PATA controllers via the new ATA layer.
403 tristate "HPT 372N/302N PATA support"
406 This option enables support for the N variant HPT PATA
407 controllers via the new ATA layer
412 tristate "HPT 343/363 PATA support"
415 This option enables support for the HPT 343/363
416 PATA controllers via the new ATA layer
420 config PATA_HPT3X3_DMA
421 bool "HPT 343/363 DMA support"
422 depends on PATA_HPT3X3
424 This option enables DMA support for the HPT343/363
425 controllers. Enable with care as there are still some
426 problems with DMA on this chipset.
429 tristate "Acorn ICS PATA support"
430 depends on ARM && ARCH_ACORN
432 On Acorn systems, say Y here if you wish to use the ICS PATA
433 interface card. This is not required for ICS partition support.
434 If you are unsure, say N to this.
437 tristate "IT8213 PATA support (Experimental)"
438 depends on PCI && EXPERIMENTAL
440 This option enables support for the ITE 821 PATA
441 controllers via the new ATA layer.
446 tristate "IT8211/2 PATA support"
449 This option enables support for the ITE 8211 and 8212
450 PATA controllers via the new ATA layer, including RAID
456 tristate "JMicron PATA support"
459 Enable support for the JMicron IDE controller, via the new
465 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
468 Most IDE capable PowerMacs have IDE busses driven by a variant
469 of this controller which is part of the Apple chipset used on
470 most PowerMac models. Some models have multiple busses using
471 different chipsets, though generally, MacIO is one of them.
474 tristate "Marvell PATA support via legacy mode"
477 This option enables limited support for the Marvell 88SE61xx ATA
478 controllers. If you wish to use only the SATA ports then select
479 the AHCI driver alone. If you wish to the use the PATA port or
480 both SATA and PATA include this driver.
485 tristate "Freescale MPC52xx SoC internal IDE"
486 depends on PPC_MPC52xx && PPC_BESTCOMM
487 select PPC_BESTCOMM_ATA
489 This option enables support for integrated IDE controller
490 of the Freescale MPC52xx SoC.
495 tristate "NETCELL Revolution RAID support"
498 This option enables support for the Netcell Revolution RAID
504 tristate "Ninja32/Delkin Cardbus ATA support"
507 This option enables support for the Ninja32, Delkin and
508 possibly other brands of Cardbus ATA adapter
513 tristate "Nat Semi NS87415 PATA support"
516 This option enables support for the National Semiconductor
517 NS87415 PCI-IDE controller.
522 tristate "Intel PATA old PIIX support"
525 This option enables support for early PIIX PATA support.
530 tristate "OPTI FireStar PATA support (Very Experimental)"
531 depends on PCI && EXPERIMENTAL
533 This option enables DMA/PIO support for the later OPTi
534 controllers found on some old motherboards and in some
540 tristate "Promise PATA 2027x support"
543 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
548 tristate "Older Promise PATA controller support"
551 This option enables support for the Promise 20246, 20262, 20263,
552 20265 and 20267 adapters.
557 tristate "RADISYS 82600 PATA support (Experimental)"
558 depends on PCI && EXPERIMENTAL
560 This option enables support for the RADISYS 82600
561 PATA controllers via the new ATA layer
566 tristate "RDC PATA support"
569 This option enables basic support for the later RDC PATA controllers
570 controllers via the new ATA layer. For the RDC 1010, you need to
571 enable the IT821X driver instead.
576 tristate "SC1200 PATA support"
579 This option enables support for the NatSemi/AMD SC1200 SoC
580 companion chip used with the Geode processor family.
585 tristate "Toshiba's Cell Reference Set IDE support"
586 depends on PCI && PPC_CELLEB
588 This option enables support for the built-in IDE controller on
589 Toshiba Cell Reference Board.
594 tristate "Intel SCH PATA support"
597 This option enables support for Intel SCH PATA on the Intel
598 SCH (US15W, US15L, UL11L) series host controllers.
602 config PATA_SERVERWORKS
603 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
606 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
607 HT1000 PATA controllers, via the new ATA layer.
612 tristate "CMD / Silicon Image 680 PATA support"
615 This option enables support for CMD / Silicon Image 680 PATA.
620 tristate "SiS PATA support"
623 This option enables support for SiS PATA controllers
628 tristate "Toshiba Piccolo support (Experimental)"
629 depends on PCI && EXPERIMENTAL
631 Support for the Toshiba Piccolo controllers. Currently only the
632 primary channel is supported by this driver.
637 tristate "Compaq Triflex PATA support"
640 Enable support for the Compaq 'Triflex' IDE controller as found
641 on many Compaq Pentium-Pro systems, via the new ATA layer.
646 tristate "VIA PATA support"
649 This option enables support for the VIA PATA interfaces
650 found on the many VIA chipsets.
655 tristate "PXA DMA-capable PATA support"
658 This option enables support for harddrive attached to PXA CPU's bus.
660 NOTE: This driver utilizes PXA DMA controller, in case your hardware
661 is not capable of doing MWDMA, use pata_platform instead.
666 tristate "Winbond SL82C105 PATA support"
669 This option enables support for SL82C105 PATA devices found in the
670 Netwinder and some other systems
676 comment "PIO-only SFF controllers"
679 tristate "Atmel AVR32 PATA support (Experimental)"
680 depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
682 This option enables support for the IDE devices on the
683 Atmel AT32AP platform.
688 tristate "PATA support for AT91SAM9260"
689 depends on ARM && ARCH_AT91
691 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
695 config PATA_CMD640_PCI
696 tristate "CMD640 PCI PATA support (Experimental)"
697 depends on PCI && EXPERIMENTAL
699 This option enables support for the CMD640 PCI IDE
700 interface chip. Only the primary channel is currently
706 tristate "ISA Plug and Play PATA support"
709 This option enables support for ISA plug & play ATA
710 controllers such as those found on old soundcards.
714 config PATA_IXP4XX_CF
715 tristate "IXP4XX Compact Flash support"
716 depends on ARCH_IXP4XX
718 This option enables support for a Compact Flash connected on
719 the ixp4xx expansion bus. This driver had been written for
720 Loft/Avila boards in mind but can work with others.
725 tristate "Intel PATA MPIIX support"
728 This option enables support for MPIIX PATA support.
733 tristate "Nat Semi NS87410 PATA support"
736 This option enables support for the National Semiconductor
737 NS87410 PCI-IDE controller.
742 tristate "OPTI621/6215 PATA support (Very Experimental)"
743 depends on PCI && EXPERIMENTAL
745 This option enables full PIO support for the early Opti ATA
746 controllers found on some old motherboards.
751 tristate "Palm LifeDrive PATA support"
752 depends on MACH_PALMLD
754 This option enables support for Palm LifeDrive's internal ATA
755 port via the new ATA layer.
760 tristate "PCMCIA PATA support"
763 This option enables support for PCMCIA ATA interfaces, including
764 compact flash card adapters via the new ATA layer.
768 config HAVE_PATA_PLATFORM
771 This is an internal configuration node for any machine that
772 uses pata-platform driver to enable the relevant driver in the
773 configuration structure without having to submit endless patches
774 to update the PATA_PLATFORM entry.
777 tristate "Generic platform device PATA support"
778 depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM
780 This option enables support for generic directly connected ATA
781 devices commonly found on embedded systems.
785 config PATA_OF_PLATFORM
786 tristate "OpenFirmware platform device PATA support"
787 depends on PATA_PLATFORM && PPC_OF
789 This option enables support for generic directly connected ATA
790 devices commonly found on embedded systems with OpenFirmware
796 tristate "QDI VLB PATA support"
799 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
802 tristate "RouterBoard 532 PATA CompactFlash support"
803 depends on MIKROTIK_RB532
805 This option enables support for the RouterBoard 532
806 PATA CompactFlash controller.
811 tristate "PC Tech RZ1000 PATA support"
814 This option enables basic support for the PC Tech RZ1000/1
815 PATA controllers via the new ATA layer
819 config PATA_SAMSUNG_CF
820 tristate "Samsung SoC PATA support"
821 depends on SAMSUNG_DEV_IDE
823 This option enables basic support for Samsung's S3C/S5P board
824 PATA controllers via the new ATA layer
828 config PATA_WINBOND_VLB
829 tristate "Winbond W83759A VLB PATA support (Experimental)"
830 depends on ISA && EXPERIMENTAL
833 Support for the Winbond W83759A controller on Vesa Local Bus
836 comment "Generic fallback / legacy drivers"
839 tristate "ACPI firmware driver for PATA"
840 depends on ATA_ACPI && ATA_BMDMA
842 This option enables an ACPI method driver which drives
843 motherboard PATA controller interfaces through the ACPI
844 firmware in the BIOS. This driver can sometimes handle
845 otherwise unsupported hardware.
848 tristate "Generic ATA support"
849 depends on PCI && ATA_BMDMA
851 This option enables support for generic BIOS configured
852 ATA controllers via the new ATA layer
857 tristate "Legacy ISA PATA support (Experimental)"
858 depends on (ISA || PCI) && EXPERIMENTAL
860 This option enables support for ISA/VLB/PCI bus legacy PATA
861 ports and allows them to be accessed via the new ATA layer.