2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers (libata)"
17 depends on !(M32R || M68K || S390) || BROKEN
20 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
63 depends on ATA_ACPI && PM_RUNTIME
66 This option adds support for SATA Zero Power Optical Disc
67 Drive (ZPODD). It requires both the ODD and the platform
68 support, and if enabled, will automatically power on/off the
69 ODD when certain condition is satisfied. This does not impact
70 end user's experience of the ODD, only power is saved when
71 the ODD is not in use (i.e. no disc inside).
76 bool "SATA Port Multiplier support"
79 This option adds support for SATA Port Multipliers
80 (the SATA version of an ethernet hub, or SAS expander).
82 comment "Controllers with non-SFF native interface"
85 tristate "AHCI SATA support"
88 This option enables support for AHCI Serial ATA.
92 config SATA_AHCI_PLATFORM
93 tristate "Platform AHCI SATA support"
95 This option enables support for Platform AHCI Serial ATA
101 tristate "DaVinci DA850 AHCI SATA support"
102 depends on ARCH_DAVINCI_DA850
104 This option enables support for the DaVinci DA850 SoC's
110 tristate "ST AHCI SATA support"
113 This option enables support for ST AHCI SATA controller.
118 tristate "Freescale i.MX AHCI SATA support"
119 depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
121 This option enables support for the Freescale i.MX SoC's
127 tristate "Marvell EBU AHCI SATA support"
128 depends on ARCH_MVEBU
130 This option enables support for the Marvebu EBU SoC's
136 tristate "Allwinner sunxi AHCI SATA support"
137 depends on ARCH_SUNXI
139 This option enables support for the Allwinner sunxi SoC's
145 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
148 This option enables support for APM X-Gene SoC SATA host controller.
151 tristate "Freescale 3.0Gbps SATA support"
154 This option enables support for Freescale 3.0Gbps SATA controller.
155 It can be found on MPC837x and MPC8315.
160 tristate "Initio 162x SATA support (Very Experimental)"
163 This option enables support for Initio 162x Serial ATA.
165 config SATA_ACARD_AHCI
166 tristate "ACard AHCI variant (ATP 8620)"
169 This option enables support for Acard.
174 tristate "Silicon Image 3124/3132 SATA support"
177 This option enables support for Silicon Image 3124/3132 Serial ATA.
182 bool "ATA SFF support (for legacy IDE and PATA)"
185 This option adds support for ATA controllers with SFF
186 compliant or similar programming interface.
188 SFF is the legacy IDE interface that has been around since
189 the dawn of time. Almost all PATA controllers have an
190 SFF interface. Many SATA controllers have an SFF interface
191 when configured into a legacy compatibility mode.
193 For users with exclusively modern controllers like AHCI,
194 Silicon Image 3124, or Marvell 6440, you may choose to
195 disable this unneeded SFF support.
201 comment "SFF controllers with custom DMA interface"
204 tristate "Pacific Digital ADMA support"
207 This option enables support for Pacific Digital ADMA controllers
211 config PATA_OCTEON_CF
212 tristate "OCTEON Boot Bus Compact Flash support"
213 depends on CAVIUM_OCTEON_SOC
215 This option enables a polled compact flash driver for use with
216 compact flash cards attached to the OCTEON boot bus.
221 tristate "Pacific Digital SATA QStor support"
224 This option enables support for Pacific Digital Serial ATA QStor.
229 tristate "Promise SATA SX4 support (Experimental)"
232 This option enables support for Promise Serial ATA SX4.
237 bool "ATA BMDMA support"
240 This option adds support for SFF ATA controllers with BMDMA
241 capability. BMDMA stands for bus-master DMA and is the
242 de facto DMA interface for SFF controllers.
248 comment "SATA SFF controllers with BMDMA"
251 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
254 This option enables support for ICH5/6/7/8 Serial ATA
255 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
261 tristate "DesignWare Cores SATA support"
264 This option enables support for the on-chip SATA controller of the
265 AppliedMicro processor 460EX.
269 config SATA_DWC_DEBUG
270 bool "Debugging driver version"
273 This option enables debugging output in the driver.
275 config SATA_DWC_VDEBUG
276 bool "Verbose debug output"
277 depends on SATA_DWC_DEBUG
279 This option enables the taskfile dumping and NCQ debugging.
282 tristate "Calxeda Highbank SATA support"
283 depends on ARCH_HIGHBANK || COMPILE_TEST
285 This option enables support for the Calxeda Highbank SoC's
291 tristate "Marvell SATA support"
292 depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
293 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
296 This option enables support for the Marvell Serial ATA family.
297 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
298 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
303 tristate "NVIDIA SATA support"
306 This option enables support for NVIDIA Serial ATA.
311 tristate "Promise SATA TX2/TX4 support"
314 This option enables support for Promise Serial ATA TX2/TX4.
319 tristate "Renesas R-Car SATA support"
320 depends on ARCH_SHMOBILE || COMPILE_TEST
322 This option enables support for Renesas R-Car Serial ATA.
327 tristate "Silicon Image SATA support"
330 This option enables support for Silicon Image Serial ATA.
335 tristate "SiS 964/965/966/180 SATA support"
339 This option enables support for SiS Serial ATA on
340 SiS 964/965/966/180 and Parallel ATA on SiS 180.
341 The PATA support for SiS 180 requires additionally to
342 enable the PATA_SIS driver in the config.
346 tristate "ServerWorks Frodo / Apple K2 SATA support"
349 This option enables support for Broadcom/Serverworks/Apple K2
355 tristate "ULi Electronics SATA support"
358 This option enables support for ULi Electronics SATA.
363 tristate "VIA SATA support"
366 This option enables support for VIA Serial ATA.
371 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
374 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
378 comment "PATA SFF controllers with BMDMA"
381 tristate "ALi PATA support"
384 This option enables support for the ALi ATA interfaces
385 found on the many ALi chipsets.
390 tristate "AMD/NVidia PATA support"
393 This option enables support for the AMD and NVidia PATA
394 interfaces found on the chipsets for Athlon/Athlon64.
398 config PATA_ARASAN_CF
399 tristate "ARASAN CompactFlash PATA Controller Support"
400 depends on ARCH_SPEAR13XX || COMPILE_TEST
401 depends on DMADEVICES
404 Say Y here to support the ARASAN CompactFlash PATA controller
407 tristate "ARTOP 6210/6260 PATA support"
410 This option enables support for ARTOP PATA controllers.
415 tristate "ATI PATA support"
418 This option enables support for the ATI ATA interfaces
419 found on the many ATI chipsets.
424 tristate "ARTOP/Acard ATP867X PATA support"
427 This option enables support for ARTOP/Acard ATP867X PATA
433 tristate "Blackfin 54x ATAPI support"
434 depends on BF542 || BF548 || BF549
436 This option enables support for the built-in ATAPI controller on
437 Blackfin 54x family chips.
442 tristate "CMD64x PATA support"
445 This option enables support for the CMD64x series chips
446 except for the CMD640.
451 tristate "CS5510/5520 PATA support"
452 depends on PCI && (X86_32 || COMPILE_TEST)
454 This option enables support for the Cyrix 5510/5520
455 companion chip used with the MediaGX/Geode processor family.
460 tristate "CS5530 PATA support"
461 depends on PCI && (X86_32 || COMPILE_TEST)
463 This option enables support for the Cyrix/NatSemi/AMD CS5530
464 companion chip used with the MediaGX/Geode processor family.
469 tristate "CS5535 PATA support (Experimental)"
470 depends on PCI && X86_32
472 This option enables support for the NatSemi/AMD CS5535
473 companion chip used with the Geode processor family.
478 tristate "CS5536 PATA support"
479 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
481 This option enables support for the AMD CS5536
482 companion chip used with the Geode LX processor family.
487 tristate "Cypress CY82C693 PATA support (Very Experimental)"
490 This option enables support for the Cypress/Contaq CY82C693
491 chipset found in some Alpha systems
496 tristate "EFAR SLC90E66 support"
499 This option enables support for the EFAR SLC90E66
500 IDE controller found on some older machines.
505 tristate "Cirrus Logic EP93xx PATA support"
506 depends on ARCH_EP93XX
508 This option enables support for the PATA controller in
509 the Cirrus Logic EP9312 and EP9315 ARM CPU.
514 tristate "HPT 366/368 PATA support"
517 This option enables support for the HPT 366 and 368
518 PATA controllers via the new ATA layer.
523 tristate "HPT 370/370A/371/372/374/302 PATA support"
526 This option enables support for the majority of the later HPT
527 PATA controllers via the new ATA layer.
532 tristate "HPT 371N/372N/302N PATA support"
535 This option enables support for the N variant HPT PATA
536 controllers via the new ATA layer.
541 tristate "HPT 343/363 PATA support"
544 This option enables support for the HPT 343/363
545 PATA controllers via the new ATA layer
549 config PATA_HPT3X3_DMA
550 bool "HPT 343/363 DMA support"
551 depends on PATA_HPT3X3
553 This option enables DMA support for the HPT343/363
554 controllers. Enable with care as there are still some
555 problems with DMA on this chipset.
558 tristate "Acorn ICS PATA support"
559 depends on ARM && ARCH_ACORN
561 On Acorn systems, say Y here if you wish to use the ICS PATA
562 interface card. This is not required for ICS partition support.
563 If you are unsure, say N to this.
566 tristate "PATA support for Freescale iMX"
569 This option enables support for the PATA host available on Freescale
575 tristate "IT8213 PATA support (Experimental)"
578 This option enables support for the ITE 821 PATA
579 controllers via the new ATA layer.
584 tristate "IT8211/2 PATA support"
587 This option enables support for the ITE 8211 and 8212
588 PATA controllers via the new ATA layer, including RAID
594 tristate "JMicron PATA support"
597 Enable support for the JMicron IDE controller, via the new
603 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
606 Most IDE capable PowerMacs have IDE busses driven by a variant
607 of this controller which is part of the Apple chipset used on
608 most PowerMac models. Some models have multiple busses using
609 different chipsets, though generally, MacIO is one of them.
612 tristate "Marvell PATA support via legacy mode"
615 This option enables limited support for the Marvell 88SE61xx ATA
616 controllers. If you wish to use only the SATA ports then select
617 the AHCI driver alone. If you wish to the use the PATA port or
618 both SATA and PATA include this driver.
623 tristate "Freescale MPC52xx SoC internal IDE"
624 depends on PPC_MPC52xx && PPC_BESTCOMM
625 select PPC_BESTCOMM_ATA
627 This option enables support for integrated IDE controller
628 of the Freescale MPC52xx SoC.
633 tristate "NETCELL Revolution RAID support"
636 This option enables support for the Netcell Revolution RAID
642 tristate "Ninja32/Delkin Cardbus ATA support"
645 This option enables support for the Ninja32, Delkin and
646 possibly other brands of Cardbus ATA adapter
651 tristate "Nat Semi NS87415 PATA support"
654 This option enables support for the National Semiconductor
655 NS87415 PCI-IDE controller.
660 tristate "Intel PATA old PIIX support"
663 This option enables support for early PIIX PATA support.
668 tristate "OPTI FireStar PATA support (Very Experimental)"
671 This option enables DMA/PIO support for the later OPTi
672 controllers found on some old motherboards and in some
678 tristate "Promise PATA 2027x support"
681 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
686 tristate "Older Promise PATA controller support"
689 This option enables support for the Promise 20246, 20262, 20263,
690 20265 and 20267 adapters.
695 tristate "RADISYS 82600 PATA support (Experimental)"
698 This option enables support for the RADISYS 82600
699 PATA controllers via the new ATA layer
704 tristate "RDC PATA support"
707 This option enables basic support for the later RDC PATA controllers
708 controllers via the new ATA layer. For the RDC 1010, you need to
709 enable the IT821X driver instead.
714 tristate "SC1200 PATA support"
715 depends on PCI && (X86_32 || COMPILE_TEST)
717 This option enables support for the NatSemi/AMD SC1200 SoC
718 companion chip used with the Geode processor family.
723 tristate "Toshiba's Cell Reference Set IDE support"
724 depends on PCI && PPC_CELLEB
726 This option enables support for the built-in IDE controller on
727 Toshiba Cell Reference Board.
732 tristate "Intel SCH PATA support"
735 This option enables support for Intel SCH PATA on the Intel
736 SCH (US15W, US15L, UL11L) series host controllers.
740 config PATA_SERVERWORKS
741 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
744 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
745 HT1000 PATA controllers, via the new ATA layer.
750 tristate "CMD / Silicon Image 680 PATA support"
753 This option enables support for CMD / Silicon Image 680 PATA.
758 tristate "SiS PATA support"
761 This option enables support for SiS PATA controllers
766 tristate "Toshiba Piccolo support (Experimental)"
769 Support for the Toshiba Piccolo controllers. Currently only the
770 primary channel is supported by this driver.
775 tristate "Compaq Triflex PATA support"
778 Enable support for the Compaq 'Triflex' IDE controller as found
779 on many Compaq Pentium-Pro systems, via the new ATA layer.
784 tristate "VIA PATA support"
787 This option enables support for the VIA PATA interfaces
788 found on the many VIA chipsets.
793 tristate "PXA DMA-capable PATA support"
796 This option enables support for harddrive attached to PXA CPU's bus.
798 NOTE: This driver utilizes PXA DMA controller, in case your hardware
799 is not capable of doing MWDMA, use pata_platform instead.
804 tristate "Winbond SL82C105 PATA support"
807 This option enables support for SL82C105 PATA devices found in the
808 Netwinder and some other systems
814 comment "PIO-only SFF controllers"
817 tristate "Atmel AVR32 PATA support (Experimental)"
818 depends on AVR32 && PLATFORM_AT32AP
820 This option enables support for the IDE devices on the
821 Atmel AT32AP platform.
826 tristate "PATA support for AT91SAM9260"
827 depends on ARM && SOC_AT91SAM9
829 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
833 config PATA_CMD640_PCI
834 tristate "CMD640 PCI PATA support (Experimental)"
837 This option enables support for the CMD640 PCI IDE
838 interface chip. Only the primary channel is currently
844 tristate "ISA Plug and Play PATA support"
847 This option enables support for ISA plug & play ATA
848 controllers such as those found on old soundcards.
852 config PATA_IXP4XX_CF
853 tristate "IXP4XX Compact Flash support"
854 depends on ARCH_IXP4XX
856 This option enables support for a Compact Flash connected on
857 the ixp4xx expansion bus. This driver had been written for
858 Loft/Avila boards in mind but can work with others.
863 tristate "Intel PATA MPIIX support"
866 This option enables support for MPIIX PATA support.
871 tristate "Nat Semi NS87410 PATA support"
874 This option enables support for the National Semiconductor
875 NS87410 PCI-IDE controller.
880 tristate "OPTI621/6215 PATA support (Very Experimental)"
883 This option enables full PIO support for the early Opti ATA
884 controllers found on some old motherboards.
889 tristate "Palm LifeDrive PATA support"
890 depends on MACH_PALMLD
892 This option enables support for Palm LifeDrive's internal ATA
893 port via the new ATA layer.
898 tristate "PCMCIA PATA support"
901 This option enables support for PCMCIA ATA interfaces, including
902 compact flash card adapters via the new ATA layer.
907 tristate "Generic platform device PATA support"
908 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
910 This option enables support for generic directly connected ATA
911 devices commonly found on embedded systems.
915 config PATA_OF_PLATFORM
916 tristate "OpenFirmware platform device PATA support"
917 depends on PATA_PLATFORM && OF
919 This option enables support for generic directly connected ATA
920 devices commonly found on embedded systems with OpenFirmware
926 tristate "QDI VLB PATA support"
930 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
933 tristate "RouterBoard 532 PATA CompactFlash support"
934 depends on MIKROTIK_RB532
936 This option enables support for the RouterBoard 532
937 PATA CompactFlash controller.
942 tristate "PC Tech RZ1000 PATA support"
945 This option enables basic support for the PC Tech RZ1000/1
946 PATA controllers via the new ATA layer
950 config PATA_SAMSUNG_CF
951 tristate "Samsung SoC PATA support"
952 depends on SAMSUNG_DEV_IDE
954 This option enables basic support for Samsung's S3C/S5P board
955 PATA controllers via the new ATA layer
959 config PATA_WINBOND_VLB
960 tristate "Winbond W83759A VLB PATA support (Experimental)"
964 Support for the Winbond W83759A controller on Vesa Local Bus
967 comment "Generic fallback / legacy drivers"
970 tristate "ACPI firmware driver for PATA"
971 depends on ATA_ACPI && ATA_BMDMA
973 This option enables an ACPI method driver which drives
974 motherboard PATA controller interfaces through the ACPI
975 firmware in the BIOS. This driver can sometimes handle
976 otherwise unsupported hardware.
979 tristate "Generic ATA support"
980 depends on PCI && ATA_BMDMA
982 This option enables support for generic BIOS configured
983 ATA controllers via the new ATA layer
988 tristate "Legacy ISA PATA support (Experimental)"
989 depends on (ISA || PCI)
991 This option enables support for ISA/VLB/PCI bus legacy PATA
992 ports and allows them to be accessed via the new ATA layer.