2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers (libata)"
17 depends on !(M32R || M68K || S390) || BROKEN
20 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
63 depends on ATA_ACPI && PM_RUNTIME
66 This option adds support for SATA Zero Power Optical Disc
67 Drive (ZPODD). It requires both the ODD and the platform
68 support, and if enabled, will automatically power on/off the
69 ODD when certain condition is satisfied. This does not impact
70 end user's experience of the ODD, only power is saved when
71 the ODD is not in use (i.e. no disc inside).
76 bool "SATA Port Multiplier support"
79 This option adds support for SATA Port Multipliers
80 (the SATA version of an ethernet hub, or SAS expander).
82 comment "Controllers with non-SFF native interface"
85 tristate "AHCI SATA support"
88 This option enables support for AHCI Serial ATA.
92 config SATA_AHCI_PLATFORM
93 tristate "Platform AHCI SATA support"
95 This option enables support for Platform AHCI Serial ATA
101 tristate "DaVinci DA850 AHCI SATA support"
102 depends on ARCH_DAVINCI_DA850
104 This option enables support for the DaVinci DA850 SoC's
110 tristate "ST AHCI SATA support"
113 This option enables support for ST AHCI SATA controller.
118 tristate "Freescale i.MX AHCI SATA support"
119 depends on MFD_SYSCON
121 This option enables support for the Freescale i.MX SoC's
127 tristate "Allwinner sunxi AHCI SATA support"
128 depends on ARCH_SUNXI
130 This option enables support for the Allwinner sunxi SoC's
136 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
137 depends on ARM64 || COMPILE_TEST
140 This option enables support for APM X-Gene SoC SATA host controller.
143 tristate "Freescale 3.0Gbps SATA support"
146 This option enables support for Freescale 3.0Gbps SATA controller.
147 It can be found on MPC837x and MPC8315.
152 tristate "Initio 162x SATA support (Very Experimental)"
155 This option enables support for Initio 162x Serial ATA.
157 config SATA_ACARD_AHCI
158 tristate "ACard AHCI variant (ATP 8620)"
161 This option enables support for Acard.
166 tristate "Silicon Image 3124/3132 SATA support"
169 This option enables support for Silicon Image 3124/3132 Serial ATA.
174 bool "ATA SFF support (for legacy IDE and PATA)"
177 This option adds support for ATA controllers with SFF
178 compliant or similar programming interface.
180 SFF is the legacy IDE interface that has been around since
181 the dawn of time. Almost all PATA controllers have an
182 SFF interface. Many SATA controllers have an SFF interface
183 when configured into a legacy compatibility mode.
185 For users with exclusively modern controllers like AHCI,
186 Silicon Image 3124, or Marvell 6440, you may choose to
187 disable this unneeded SFF support.
193 comment "SFF controllers with custom DMA interface"
196 tristate "Pacific Digital ADMA support"
199 This option enables support for Pacific Digital ADMA controllers
203 config PATA_OCTEON_CF
204 tristate "OCTEON Boot Bus Compact Flash support"
205 depends on CAVIUM_OCTEON_SOC
207 This option enables a polled compact flash driver for use with
208 compact flash cards attached to the OCTEON boot bus.
213 tristate "Pacific Digital SATA QStor support"
216 This option enables support for Pacific Digital Serial ATA QStor.
221 tristate "Promise SATA SX4 support (Experimental)"
224 This option enables support for Promise Serial ATA SX4.
229 bool "ATA BMDMA support"
232 This option adds support for SFF ATA controllers with BMDMA
233 capability. BMDMA stands for bus-master DMA and is the
234 de facto DMA interface for SFF controllers.
240 comment "SATA SFF controllers with BMDMA"
243 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
246 This option enables support for ICH5/6/7/8 Serial ATA
247 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
253 tristate "DesignWare Cores SATA support"
256 This option enables support for the on-chip SATA controller of the
257 AppliedMicro processor 460EX.
261 config SATA_DWC_DEBUG
262 bool "Debugging driver version"
265 This option enables debugging output in the driver.
267 config SATA_DWC_VDEBUG
268 bool "Verbose debug output"
269 depends on SATA_DWC_DEBUG
271 This option enables the taskfile dumping and NCQ debugging.
274 tristate "Calxeda Highbank SATA support"
276 This option enables support for the Calxeda Highbank SoC's
282 tristate "Marvell SATA support"
284 This option enables support for the Marvell Serial ATA family.
285 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
286 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
291 tristate "NVIDIA SATA support"
294 This option enables support for NVIDIA Serial ATA.
299 tristate "Promise SATA TX2/TX4 support"
302 This option enables support for Promise Serial ATA TX2/TX4.
307 tristate "Renesas R-Car SATA support"
308 depends on ARCH_SHMOBILE || COMPILE_TEST
310 This option enables support for Renesas R-Car Serial ATA.
315 tristate "Silicon Image SATA support"
318 This option enables support for Silicon Image Serial ATA.
323 tristate "SiS 964/965/966/180 SATA support"
327 This option enables support for SiS Serial ATA on
328 SiS 964/965/966/180 and Parallel ATA on SiS 180.
329 The PATA support for SiS 180 requires additionally to
330 enable the PATA_SIS driver in the config.
334 tristate "ServerWorks Frodo / Apple K2 SATA support"
337 This option enables support for Broadcom/Serverworks/Apple K2
343 tristate "ULi Electronics SATA support"
346 This option enables support for ULi Electronics SATA.
351 tristate "VIA SATA support"
354 This option enables support for VIA Serial ATA.
359 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
362 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
366 comment "PATA SFF controllers with BMDMA"
369 tristate "ALi PATA support"
372 This option enables support for the ALi ATA interfaces
373 found on the many ALi chipsets.
378 tristate "AMD/NVidia PATA support"
381 This option enables support for the AMD and NVidia PATA
382 interfaces found on the chipsets for Athlon/Athlon64.
386 config PATA_ARASAN_CF
387 tristate "ARASAN CompactFlash PATA Controller Support"
388 depends on DMADEVICES
391 Say Y here to support the ARASAN CompactFlash PATA controller
394 tristate "ARTOP 6210/6260 PATA support"
397 This option enables support for ARTOP PATA controllers.
402 tristate "ATI PATA support"
405 This option enables support for the ATI ATA interfaces
406 found on the many ATI chipsets.
411 tristate "ARTOP/Acard ATP867X PATA support"
414 This option enables support for ARTOP/Acard ATP867X PATA
420 tristate "Blackfin 54x ATAPI support"
421 depends on BF542 || BF548 || BF549
423 This option enables support for the built-in ATAPI controller on
424 Blackfin 54x family chips.
429 tristate "CMD64x PATA support"
432 This option enables support for the CMD64x series chips
433 except for the CMD640.
438 tristate "CS5510/5520 PATA support"
439 depends on PCI && (X86_32 || COMPILE_TEST)
441 This option enables support for the Cyrix 5510/5520
442 companion chip used with the MediaGX/Geode processor family.
447 tristate "CS5530 PATA support"
448 depends on PCI && (X86_32 || COMPILE_TEST)
450 This option enables support for the Cyrix/NatSemi/AMD CS5530
451 companion chip used with the MediaGX/Geode processor family.
456 tristate "CS5535 PATA support (Experimental)"
457 depends on PCI && X86_32
459 This option enables support for the NatSemi/AMD CS5535
460 companion chip used with the Geode processor family.
465 tristate "CS5536 PATA support"
466 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
468 This option enables support for the AMD CS5536
469 companion chip used with the Geode LX processor family.
474 tristate "Cypress CY82C693 PATA support (Very Experimental)"
477 This option enables support for the Cypress/Contaq CY82C693
478 chipset found in some Alpha systems
483 tristate "EFAR SLC90E66 support"
486 This option enables support for the EFAR SLC90E66
487 IDE controller found on some older machines.
492 tristate "Cirrus Logic EP93xx PATA support"
493 depends on ARCH_EP93XX
495 This option enables support for the PATA controller in
496 the Cirrus Logic EP9312 and EP9315 ARM CPU.
501 tristate "HPT 366/368 PATA support"
504 This option enables support for the HPT 366 and 368
505 PATA controllers via the new ATA layer.
510 tristate "HPT 370/370A/371/372/374/302 PATA support"
513 This option enables support for the majority of the later HPT
514 PATA controllers via the new ATA layer.
519 tristate "HPT 371N/372N/302N PATA support"
522 This option enables support for the N variant HPT PATA
523 controllers via the new ATA layer.
528 tristate "HPT 343/363 PATA support"
531 This option enables support for the HPT 343/363
532 PATA controllers via the new ATA layer
536 config PATA_HPT3X3_DMA
537 bool "HPT 343/363 DMA support"
538 depends on PATA_HPT3X3
540 This option enables DMA support for the HPT343/363
541 controllers. Enable with care as there are still some
542 problems with DMA on this chipset.
545 tristate "Acorn ICS PATA support"
546 depends on ARM && ARCH_ACORN
548 On Acorn systems, say Y here if you wish to use the ICS PATA
549 interface card. This is not required for ICS partition support.
550 If you are unsure, say N to this.
553 tristate "PATA support for Freescale iMX"
556 This option enables support for the PATA host available on Freescale
562 tristate "IT8213 PATA support (Experimental)"
565 This option enables support for the ITE 821 PATA
566 controllers via the new ATA layer.
571 tristate "IT8211/2 PATA support"
574 This option enables support for the ITE 8211 and 8212
575 PATA controllers via the new ATA layer, including RAID
581 tristate "JMicron PATA support"
584 Enable support for the JMicron IDE controller, via the new
590 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
593 Most IDE capable PowerMacs have IDE busses driven by a variant
594 of this controller which is part of the Apple chipset used on
595 most PowerMac models. Some models have multiple busses using
596 different chipsets, though generally, MacIO is one of them.
599 tristate "Marvell PATA support via legacy mode"
602 This option enables limited support for the Marvell 88SE61xx ATA
603 controllers. If you wish to use only the SATA ports then select
604 the AHCI driver alone. If you wish to the use the PATA port or
605 both SATA and PATA include this driver.
610 tristate "Freescale MPC52xx SoC internal IDE"
611 depends on PPC_MPC52xx && PPC_BESTCOMM
612 select PPC_BESTCOMM_ATA
614 This option enables support for integrated IDE controller
615 of the Freescale MPC52xx SoC.
620 tristate "NETCELL Revolution RAID support"
623 This option enables support for the Netcell Revolution RAID
629 tristate "Ninja32/Delkin Cardbus ATA support"
632 This option enables support for the Ninja32, Delkin and
633 possibly other brands of Cardbus ATA adapter
638 tristate "Nat Semi NS87415 PATA support"
641 This option enables support for the National Semiconductor
642 NS87415 PCI-IDE controller.
647 tristate "Intel PATA old PIIX support"
650 This option enables support for early PIIX PATA support.
655 tristate "OPTI FireStar PATA support (Very Experimental)"
658 This option enables DMA/PIO support for the later OPTi
659 controllers found on some old motherboards and in some
665 tristate "Promise PATA 2027x support"
668 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
673 tristate "Older Promise PATA controller support"
676 This option enables support for the Promise 20246, 20262, 20263,
677 20265 and 20267 adapters.
682 tristate "RADISYS 82600 PATA support (Experimental)"
685 This option enables support for the RADISYS 82600
686 PATA controllers via the new ATA layer
691 tristate "RDC PATA support"
694 This option enables basic support for the later RDC PATA controllers
695 controllers via the new ATA layer. For the RDC 1010, you need to
696 enable the IT821X driver instead.
701 tristate "SC1200 PATA support"
702 depends on PCI && (X86_32 || COMPILE_TEST)
704 This option enables support for the NatSemi/AMD SC1200 SoC
705 companion chip used with the Geode processor family.
710 tristate "Toshiba's Cell Reference Set IDE support"
711 depends on PCI && PPC_CELLEB
713 This option enables support for the built-in IDE controller on
714 Toshiba Cell Reference Board.
719 tristate "Intel SCH PATA support"
722 This option enables support for Intel SCH PATA on the Intel
723 SCH (US15W, US15L, UL11L) series host controllers.
727 config PATA_SERVERWORKS
728 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
731 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
732 HT1000 PATA controllers, via the new ATA layer.
737 tristate "CMD / Silicon Image 680 PATA support"
740 This option enables support for CMD / Silicon Image 680 PATA.
745 tristate "SiS PATA support"
748 This option enables support for SiS PATA controllers
753 tristate "Toshiba Piccolo support (Experimental)"
756 Support for the Toshiba Piccolo controllers. Currently only the
757 primary channel is supported by this driver.
762 tristate "Compaq Triflex PATA support"
765 Enable support for the Compaq 'Triflex' IDE controller as found
766 on many Compaq Pentium-Pro systems, via the new ATA layer.
771 tristate "VIA PATA support"
774 This option enables support for the VIA PATA interfaces
775 found on the many VIA chipsets.
780 tristate "PXA DMA-capable PATA support"
783 This option enables support for harddrive attached to PXA CPU's bus.
785 NOTE: This driver utilizes PXA DMA controller, in case your hardware
786 is not capable of doing MWDMA, use pata_platform instead.
791 tristate "Winbond SL82C105 PATA support"
794 This option enables support for SL82C105 PATA devices found in the
795 Netwinder and some other systems
801 comment "PIO-only SFF controllers"
804 tristate "Atmel AVR32 PATA support (Experimental)"
805 depends on AVR32 && PLATFORM_AT32AP
807 This option enables support for the IDE devices on the
808 Atmel AT32AP platform.
813 tristate "PATA support for AT91SAM9260"
814 depends on ARM && ARCH_AT91
816 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
820 config PATA_CMD640_PCI
821 tristate "CMD640 PCI PATA support (Experimental)"
824 This option enables support for the CMD640 PCI IDE
825 interface chip. Only the primary channel is currently
831 tristate "ISA Plug and Play PATA support"
834 This option enables support for ISA plug & play ATA
835 controllers such as those found on old soundcards.
839 config PATA_IXP4XX_CF
840 tristate "IXP4XX Compact Flash support"
841 depends on ARCH_IXP4XX
843 This option enables support for a Compact Flash connected on
844 the ixp4xx expansion bus. This driver had been written for
845 Loft/Avila boards in mind but can work with others.
850 tristate "Intel PATA MPIIX support"
853 This option enables support for MPIIX PATA support.
858 tristate "Nat Semi NS87410 PATA support"
861 This option enables support for the National Semiconductor
862 NS87410 PCI-IDE controller.
867 tristate "OPTI621/6215 PATA support (Very Experimental)"
870 This option enables full PIO support for the early Opti ATA
871 controllers found on some old motherboards.
876 tristate "Palm LifeDrive PATA support"
877 depends on MACH_PALMLD
879 This option enables support for Palm LifeDrive's internal ATA
880 port via the new ATA layer.
885 tristate "PCMCIA PATA support"
888 This option enables support for PCMCIA ATA interfaces, including
889 compact flash card adapters via the new ATA layer.
894 tristate "Generic platform device PATA support"
895 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
897 This option enables support for generic directly connected ATA
898 devices commonly found on embedded systems.
902 config PATA_OF_PLATFORM
903 tristate "OpenFirmware platform device PATA support"
904 depends on PATA_PLATFORM && OF
906 This option enables support for generic directly connected ATA
907 devices commonly found on embedded systems with OpenFirmware
913 tristate "QDI VLB PATA support"
917 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
920 tristate "RouterBoard 532 PATA CompactFlash support"
921 depends on MIKROTIK_RB532
923 This option enables support for the RouterBoard 532
924 PATA CompactFlash controller.
929 tristate "PC Tech RZ1000 PATA support"
932 This option enables basic support for the PC Tech RZ1000/1
933 PATA controllers via the new ATA layer
937 config PATA_SAMSUNG_CF
938 tristate "Samsung SoC PATA support"
939 depends on SAMSUNG_DEV_IDE
941 This option enables basic support for Samsung's S3C/S5P board
942 PATA controllers via the new ATA layer
946 config PATA_WINBOND_VLB
947 tristate "Winbond W83759A VLB PATA support (Experimental)"
951 Support for the Winbond W83759A controller on Vesa Local Bus
954 comment "Generic fallback / legacy drivers"
957 tristate "ACPI firmware driver for PATA"
958 depends on ATA_ACPI && ATA_BMDMA
960 This option enables an ACPI method driver which drives
961 motherboard PATA controller interfaces through the ACPI
962 firmware in the BIOS. This driver can sometimes handle
963 otherwise unsupported hardware.
966 tristate "Generic ATA support"
967 depends on PCI && ATA_BMDMA
969 This option enables support for generic BIOS configured
970 ATA controllers via the new ATA layer
975 tristate "Legacy ISA PATA support (Experimental)"
976 depends on (ISA || PCI)
978 This option enables support for ISA/VLB/PCI bus legacy PATA
979 ports and allows them to be accessed via the new ATA layer.